Professional Documents
Culture Documents
Cam
Info
PRoGRam 1000 Beschlagteile
1 Quarter turn
t = 4
Cam m.s. zinc plated
Dimension H for GH 18 in mm
H L
18 35 1000-5046
20 35 1000-5161
22 35 1000-5119
28 35 1000-5164
Note:
Note: The H-dimension will be reduced
The plastic cam is made for GH = 18! by 2 mm when used with finger
pull (see page 1C-320)
By using the plastic cam with captive cover Further parts see page
of fixing screws protective insulation will be ‒ Rod 1C-620
reached for the installation of metal quarter ‒ Quarter turn 1B-120
turns (program 1000) 1B-140
1B-320
up to 1B-335
1B-360
up to 1B-760
1B-830
up to 1B-860
‒ Rod control or
Plastic cam polyamide black with reinforced cover plate m.s. zinc plated, internal handle 1C-220
‒ Swinghandle 3N-120
studs m.s. zinc plated ‒ Heavy duty latch 10a-620
without studs 1107-U3 10a-640
with studs 1107-U4
1C-160 01/10
(1C-120)