You are on page 1of 2

Zamora, Myggy Q.

BSCPE 3A

1. I was given the option to choose the letter "B," "Protective Exit Enclosure," which is the clause that
is used to assess the fire resistance of exits, under Rule 10: Fire Safety Measures of the Philippines
Fire Code. This part largely evaluates the components and assemblies used in structures and
infrastructure to ensure that, as determined by testing, they can sustain a fire. In essence, it serves
as a separate part of the structure where occupants may leave if it caught fire.

2. In essence, this provision requires that each building, residence, and facility's fire exits be set apart
from the rest of the construction. The RIRR governed this provision and imposed strict guidelines
on it. This means that the exit must last and offer security long enough for building occupants to
use it.

3. Yes, it is appropriate for the Philippine context since, as we all know, there have been several times
throughout our nation's history when buildings and infrastructure have caught fire. These
catastrophes have resulted in many fatalities hence our nation needs a provision like this. The
second question has a negative response. The issue is that some buildings in our nation do not
provide a safe fire exit in the case of a fire. By "extensively observed and obeyed," you imply that
every building in the nation HAS FOLLOWED THE RIRR'S REQUIREMENTS AND
ASSEMBLY FOR THE FIRE EXITS OF THE BUILDINGS. In other words, the building owners
are looking for ways to save money.
4. This is the strongest of all the buildings I've seen, with the strongest message being ACCESS TO
EXITS/ARRANGEMENT TO EXITS, and the weakest being PROTECTIVE ENCLOSURE OF
EXIT. I'm constantly mindful of the signage for the fire exits. This is one of the best ways for the
occupants to know where to flee if the building catches fire. Additionally, present are the sirens
and blinking lights. And from what I've seen, these fire exits are rather straightforward to discover.
The configuration of the building's exits can now be observed and understood by tenants in floor
spaces provided by the buildings. This guarantees the accuracy of the data.

5. I would start by advising that every building follow and comprehend the fundamental standards of
the RIRR. Second, fire-resistant materials and construction should be used for the egress path. The
gateway should be isolated from the building, and the fire exit should be built of FIRE RESISTANT
MATERIALS. Why do exit spaces need to be capped? Because there are more chances for the fire
to enter if there are more apertures. There should be enough escape routes available. There are not
many, but neither are there too few. If the structure is purely conventional, two exits are preferable.
the door to the fire exit at all times.

You might also like