Professional Documents
Culture Documents
Practical Task 3 - F1011
Practical Task 3 - F1011
NUMBER OF ASSESSMENT : 3
PREPARED BY:
PREPARED FOR :
….……………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
CLO MARKS
Part 1: Build the network and configure basic device settings [CLO1, P3] (10marks)
Step 1: Build the network as shown as in Figure 1.
Server 1
Server 2
PC
b. Set IP addresses listed in the Addressing Table for all interfaces for server.
Server 1
Vmnet 3 Vmnet 2
Server 2
PC
Part 2: Install Windows services, create new VPN user on Active Directory and join the
domain [CLO1, P4] (30 marks)
Step 1: Perform installation the Windows server services, create new VPN users on Active Directory and
join domain.
a. Server 2 – install Active Directory.
Server 1
Server 2
e. Configure static address pool for VPN user – 10.10.10.12 until 10.10.10.254.
Step 2: Configure remote PC to access VPN server.
a. Add VPN Connection
i. VPN provider: Windows (built-in)
ii. Connection name: VPN Office
iii. Server name or address: 192.168.1.10
iv. VPN type: Automatic
v. Type of sign-in info: User name and password.
vi. Insert username and password that has created in Part 2: Step 1c.
USER 1
Step 3: Connect the VPN on remote PC to verity the configuration is working.
Part 4: Verify all PCs IP address. [CLO1, P3] (10marks)
Step 1: Run CMD command on remote PC to verify VPN network adapter assign with the correct IP
address.
Step 2: Test network connectivity between remote PC and internal server by issuing command ping.
RUBRIC FOR PRACTICAL TASK 3
DFN50223 WINDOWS SERVER ADMINISTRATION
Remarks: Zero (0) mark will be given if students do not answer / perform the criteria needed.