Professional Documents
Culture Documents
AARL - Platelet Content
AARL - Platelet Content
(Ref:AARL)
TP:03
Scope
Instruments / Equipments
Ro tap
Procedure
Blend the sample with Riffle Type Sample Splitter and oven dry the
sample at 1500C for 1 hour. (1-3 hour is normally sufficient)
Assemble the screen assembly from top to bottom in the following order.
i. Screen cover
ii. Platelets screen
iii. Fines Screen
iv. Bottom Receiver Pan
Weigh the dried carbon 50 gm (± 0.1) & transfer to the Platelet screen.
Record this weight as the original sample weight.
Install the screen assembly to the Ro tap.
Remove the screen assembly from Ro tap & weigh each mesh carefully.
This document contains information pertinent to UCS. Unauthorized disclosure is strictly prohibited.
UNITED CARBON SOLUTIONS PRIVATE LIMITED
STANDARD OPERATING PROCEDURE
INTERNAL TEST PROCEDURES
Doc.No:UCS/QC/F-01 Iss/Rev No:02/00 Date:01-04-2022 Page No. 5 of 49
Calculation:
Note: the sum of weights retained on the platelets screen and fines
screen, and passing through the fines screen must be within ± 1.0 grams
of the original carbon sample weight.
This document contains information pertinent to UCS. Unauthorized disclosure is strictly prohibited.