Professional Documents
Culture Documents
291-En PSA Petrol Gauge CAN Reset VSI-2.0-DI
291-En PSA Petrol Gauge CAN Reset VSI-2.0-DI
Date: 03-10-2018
To: Commercial manager/ Workshop manager / LPG technician
Reference: PSA Petrol Gauge CAN Reset
Article number: -
System: VSI-2.0-DI
As from mid-September 2018, Prins delivers a new feature to reset the Petrol Gauge via CAN Bus
for all PSA VSI-2.0-DI conversions.
What’s new?
It is no longer necessary to mount the fuel reset module or relay with resistor. The Petrol Gauge
is now reset via the CAN bus of the BSI. Controlling and connecting via the CAN bus is more
efficient and saves a lot of conversion time.
What to do?
Use an AFC-2.1-DI 8D, and add extra CAN-wires to CAN2 of the main connector to the OBD
connector pin 3 and 8.
Check functionality
Use parameter ‘PSA Petrol Gauge CAN Reset counter’ [22309] to check the functionality. After
each ‘ignition on’ and confirmation of the BSI, the counter will increase by 1. When above 255,
the counter returns to 1.
Kind regards,
Prins Autogassystemen B.V.
After Sales department