Professional Documents
Culture Documents
UK-0008 EN 14399-4 10 HV Nut
UK-0008 EN 14399-4 10 HV Nut
Thread
dw
ISO 965-2 (6H) or ISO 965-5 (6AZ)
d
E
Dimensions EN 14399-4
Dimensional tolerances ISO 4759-1 (Gr B) & EN 14399-4
Marking ISO 898-2 (10) & EN 14399-4
mw
S Mechanical properties ISO 898-2 (10) & EN 14399-4
M Surface finish ISO 10684 (HDG) or black
Surface discontinuities ISO 6157-2
Tightening EN 1090-2
Raw material Chemical composition
Thread, mm
Dimensions, mm
Mechanical properties
Thread diameter d mm nom M12 M16 M20 M22 M24 M27 M30 M36
Nominal stress area As mm2 nom 84,3 157 245 303 353 459 561 817
Proof load Fp kN nom 89 165 260 321 374 487 595 866
min
Vickers hardness HV HV 300 - 350
max
min
Rockwell hardness HRC HRC 30 - 34
max
PRODUCT CHARACTERISTICS Page 4 of 4
Carbon conditions
Surface
Height of non- Depth of complete Non-decarburization Non-carburization
"4" pitch line, Reference hardness, hardness,
P, mm H1, mm decarburized zone decarburization, G, hardness, HV(2), hardness, HV(3),
mm HV(1), HV0,3 HV(surface),
in thread, E, mm mm HV0,3 HV0,3
HV0,3
1,75 1,073 0,379 0,716
2 1,227 0,433 0,818
2,5 1,533 0,541 1,022
max 0,008 [330 , 370] min HV(1)-30 max HV(1)+30 max 380
3 1,840 0,650 1,227
3,5 2,147 0,758 1,431
4 2,453 0,866 1,635