You are on page 1of 3

7.

Level 2 Repair

7-1. Assembling

1 Assemble LCD. 2 Assemble TSP.

Be Carefully to TSP FPCB damage.


Be Carefully to LCD damage.
Assemble depending on silk line.

3 Assemble RCV+SENSOR 3 Assemble SPEAKER

Be Carefully to RCV FPCB damage. Be Carefully to SPK FPCB damage.

7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

Assemble a PBA Ass'y Assemble the REAR


5 6
Assemply Connector

Hook Point

1. Press PBA around a Hook of Front. 1. Assemble the rear


2. Assemble a LCD connector (①bottom→ ② right/left side → ③top)

7 Screw 13point

1. Screw 13 points
Torque : 1.1 ± 0.1 Kgf·cm

7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Level 2 Repair

7-2. Disassembling

1 Unscrew REAR 13 Points 2 Disassemble REAR

1. Unscrew a rear 13 points 1. Disassemble the rear from Front

3 Disassemply Connector 4 Disassemble a PBA Ass'y

Hook Point

1. Disassemble Connector
1. Disassemble a PBA Ass'y
2. Disassemble PBA around a Hook of Front.

7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

You might also like