You are on page 1of 3

Exp -2

Star topology

· Internetwork
· 6 wired nodes
· Switch
· Tcp disable transport layer
· Link properties – set up link and down link 100 mbps and make ber to
0
· Only one source and destination pair
Bus topology
• Legacy network -token Bus
• 6 wired Nodes
• Hub in place of switch
• Tcp disable (for every exp)
• One source and destination pair (link properties default -no need to change
• Ber-0
Exp-3
Rip :
• Internetwork
• 2 wired Nodes
• 2 switches
• Routers to be fixed such that there exist 2 paths to reach node 1 and node 2
• One with more routers in between and other with less routers
Ospf :
• Same as above
• But in the path with less routers change up and downlink speed to 10
Mbps

Exp -4 :
Slotted Aloha
Mac : node density ,packet collision ,throughput ,average delay
• Legacy networks
• Slotted aloha
• 2 nodes with source and destination pair
• Link properties : only path loss
• Packet size- exp with mean 1500 and inter arrival time exp -20,000
• Repeat with 4 nodes and 6 nodes
Exp : 5
Csma/ ca : collision avoidance (Carrier Sense Multiple Access with Collision
Avoidance)
• Same as slotted aloha
• But to be done in advance network - Manet
Exp- 6 :
Call blocking probability vs Gsm :
• Cellular network - Gsm
• One base station and Msc connect them with wired
• Select even no of mobile stations (4) keep them in bs coverage area
• In Msc uplink min freq=890 Mhz and max freq=890.2 Mhz (to decrease bandwidth )
• Application types -Erlang with all parameters like inter arrival and duration time - exponential
• To view output - go to cellular metrics - ms metrics
• Create with more even no of nodes
Exp - 7

Voice activity factor and No of channels , call blocking probability in CDMA

• Cellular network - Cdma


• Base station and Msc connect with wire
• Place 60 mobile stations with 30 source and destination pairs
• Bs -interface 1 CDMA voice activity factor -1
• Run the simulation for 100s
• Repeat the same scenarios with interface 0.9,0.8….

You might also like