Professional Documents
Culture Documents
2010
PARTS LIST
12754 AE2510NT(EXP)
Ver. 2.0
GENERAL INFORMATION INTRODUCTION
Index Code Parts Name Drawing No. Type Maker Q’ty Note
I Quantity
D Code The quantity of each part used on the models is shown.
The individual Code No. for each part on the models is shown.
J Notes
E Parts Name Cautions and notes necessary to the ordering each part.
The name (description) of each part.
ORDER INSTRUCTIONS UNIT LIST
1. Confirm whether the model name and No. on the serial plate of the machine Frame Cover Lubrication
correspond to the numbers of the machines for which the parts list is effective. Upper Turret Cover(F) Foot Switch
Upper Turret Cover(R) Foot Switch Cable
2. Use the drawings in the Table of Contents to find the unit on which the part in Lower Turret Cover(F) Electric
question is shown in greater detail. Lower Turret Cover(R) Main Control Box(Built-in)
Carriage Cover Turret(58ST-2AI)F-PV
3. Spread out the referred pages.
Carriage Cover Bracket Kit Turret(45ST-4AI)F-PV
Drive Cooling ASSY AI Drive
4. Use the drawings and corresponding lists to confirm the specs, etc. of the part in
question. Drive Middle Drive(Upper)
T-axis Middle Drive(Lower)
5. When ordering, please supply the following information: Slide Turret Drive(Upper)
(1)Machine Model Movable Front Table Turret Drive(Lower)
(2)Serial No. Movable Table Shipping Power Vacuum
(3)Code Stationary Front Table M(E) Air Blow Unit
(4)Quantity
Stationary Rear Table M(E) Repositioning
Stationary Table Shipping Lower Cylinder Rise-type
Center Table Pneumatic
Reposition Brush Table Punch Assembly Jig
Reposition Brush Table Alignment Jig S
(Lower Cylinder Rise-type) Alignment Jig L
Reposition Brush Table Installation Kit 1-1/4"AI Alignment Jig
CL Table 2"AI Alignment Jig
Cover Table Bar Code Reader
Front Guard Kit
Junction Box C
Cylinder Piping(for Brush Table)
Cable(for Brush Table)
Workclamp
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵕᴾᵫᶍᶔᵿᶀᶊᶃᴾᵲᵿᶀᶊᶃᴾᵱᶆᶇᶎᶎᶇᶌᶅ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵖᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵲᵿᶀᶊᶃᴾᵱᶆᶇᶎᶎᶇᶌᶅ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᴾᵡᵿᶐᶐᶇᵿᶅᶃᴾᵡᶍᶔᶃᶐᴾᵠᶐᵿᶁᶉᶃᶒᴾᵩᶇᶒ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᴾᵤᶐᵿᶋᶃᴾᵡᶍᶔᶃᶐ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵕᴾᵨᶓᶌᶁᶒᶇᶍᶌᴾᵠᶍᶖᴾᵡ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵖᴾᵡᶗᶊᶇᶌᶂᶃᶐᴾᵮᶇᶎᶇᶌᶅᵆᶄᶍᶐᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃᵇᴾ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵗᴾᵡᵿᶀᶊᶃᵆᶄᶍᶐᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃᵇᴾ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵎᵋᵗᵐᴾᵣᶊᶃᶁᶒᶐᶇᶁ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵓᴾᵮᶍᶕᶃᶐᴾᵴᵿᶁᶓᶓᶋ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵓᵐᴾᵮᶓᶌᶁᶆᴾᵟᶑᶑᶃᶋᶀᶊᶗᴾᵨᶇᶅ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵓᵑᵊᵏᵓᵒᴾᵟᶊᶇᶅᶌᶋᶃᶌᶒᴾᵨᶇᶅᴾᵱ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵓᵓᵋᵏᵓᵖᴾᵟᶊᶇᶅᶌᶋᶃᶌᶒᴾᵨᶇᶅᴾᵪ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵓᵗᴾᵏᵋᵏᵍᵒᵀᴾᵟᵧᴾᵟᶊᶇᶅᶌᶋᶃᶌᶒᴾᵨᶇᶅ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵔᵎᴾᵐᵀᴾᵟᵧᴾᵟᶊᶇᶅᶌᶋᶃᶌᶒᴾᵨᶇᶅᴾ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵔᵏᴾᵠᵿᶐᴾᵡᶍᶂᶃᴾᵰᶃᵿᶂᶃᶐᴾ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᴾᵡᵿᶐᶐᶇᵿᶅᶃᴾᵡᶍᶔᶃᶐ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵗᴾᵫᵿᶇᶌᴾᵡᶍᶌᶒᶐᶍᶊᴾᵠᶍᶖ
ᵆᵠᶓᶇᶊᶒᵋᶇᶌᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵖᵐᵊᵖᵑᴾᵪᶓᶀᶐᶇᶁᵿᶒᶇᶍᶌ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵖᵎᵊᵖᵏᴾᵵᶍᶐᶉᶁᶊᵿᶋᶎ
ᵱᶃᶃᴾᵫᵟᵡᵦᵧᵬᵣᴾᵡᵭᵫᵮᵭᵬᵣᵬᵲᵆᵖᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵕᵊᵗᵖᴾᵫᵿᶇᶌᴾᵡᶍᶌᶒᶐᶍᶊᴾᵠᶍᶖᵆᵠᶓᶇᶊᶒᵋᶇᶌᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᴾᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᵆᵤᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᴾᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᵆᵤᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵔᴾᵣᶊᶃᶁᶒᶐᶇᶁ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵕᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵔᴾᵣᶊᶃᶁᶒᶐᶇᶁ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵔᴾᵤᶐᶍᶌᶒᴾᵥᶓᵿᶐᶂᴾᵩᶇᶒ
Ver.2.0
MACHINE COMPONENT (2)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᴾᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᵆᵰᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᴾᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᵆᵰᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵖᴾᵢᶐᶇᶔᶃᴾᵡᶍᶍᶊᶇᶌᶅᴾᵟᵱᵱᵷ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵗᵓᴾᵣᶊᶃᶁᶒᶐᶇᶁ
Ver.2.0
MACHINE COMPONENT (3)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᴾᵲᵋᵿᶖᶇᶑ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵒᴾᵡᵪᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵕᵊᵔᵖᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵓᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵎᵊᵕᵏᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ
ᵆᵪᶍᶕᶃᶐᴾᵡᶗᶊᶇᶌᶂᶃᶐᴾᵰᶇᶑᶃᵋᶒᶗᶎᶃᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵕᵊᵔᵗᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵑᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵎᵊᵕᵐᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ
ᵧᶌᶑᶒᵿᶊᶊᵿᶒᶇᶍᶌᴾᵩᶇᶒ ᵆᵪᶍᶕᶃᶐᴾᵡᶗᶊᶇᶌᶂᶃᶐᴾᵰᶇᶑᶃᵋᶒᶗᶎᶃᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵑᴾᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ
ᵧᶌᶑᶒᵿᶊᶊᵿᶒᶇᶍᶌᴾᵩᶇᶒ
ᵱᶃᶃ
ᵫᵟᵡᵦᵧᵬᵣᴾᵡᵭᵫᵮᵭᵬᵣᵬᵲᵆᵏᵏᵇ ᵱᶃᶃ
ᵫᵟᵡᵦᵧᵬᵣᴾᵡᵭᵫᵮᵭᵬᵣᵬᵲᵆᵏᵐᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵖᵊᵒᵗ
ᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵱᶃᶃᴾᵫᵟᵡᵦᵧᵬᵣᴾᵡᵭᵫᵮᵭᵬᵣᵬᵲᵆᵏᵑᵇ
ᵱᶃᶃᴾᵫᵟᵡᵦᵧᵬᵣᴾᵡᵭᵫᵮᵭᵬᵣᵬᵲᵆᵗᵇ
Ver.2.0
MACHINE COMPONENT (4)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵖᵔᴾᵪᶓᶀᶐᶇᶁᵿᶒᶇᶍᶌ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵖᵒᴾᵪᶓᶀᶐᶇᶁᵿᶒᶇᶍᶌ
ᵔᵖᵗᵕᵒᵗᵎ
Ver.2.0
MACHINE COMPONENT (5)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵔᵐᵋᵏᵔᵖᴾᵮᶌᶃᶓᶋᵿᶒᶇᶁ
ᵴᵧᵣᵵᴾᵟ
ᵔᵖᵗᵕᵒᵗᵎ
Ver.2.0
MACHINE COMPONENT (6)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵑᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵐᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵔᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵏᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵔᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵗᴾᵫᶇᶂᶂᶊᶃᴾᵢᶐᶇᶔᶃᵆᵳᶎᶎᶃᶐᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵓᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵑᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵖᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵒᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵗᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵎᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵓᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᵆᵳᶎᶎᶃᶐᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵏᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵔᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵐᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵕᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵖᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵏᴾᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᵆᵳᶎᶎᶃᶐᵇ
Ver.2.0
MACHINE COMPONENT (7)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵑᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵎᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵕᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵐᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵐᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵕᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵒᴾᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᵆᵪᶍᶕᶃᶐᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵑᴾᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᵆᵪᶍᶕᶃᶐᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵗᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵗᵊᵏᵏᵎᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵒᵊᵏᵐᵓᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵎᴾᵫᶇᶂᶂᶊᶃᴾᵢᶐᶇᶔᶃᵆᵪᶍᶕᶃᶐᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵔᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵏᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵓᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵗᴾᵪᶍᶕᶃᶐᴾᵡᶗᶊᶇᶌᶂᶃᶐᴾᵰᶇᶑᶃᵋᶒᶗᶎᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵎᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵎᵖᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᵒᴾᵲᶓᶐᶐᶃᶒᵆᵓᵖᵱᵲᵋᵐᵟᵧᵇᵤᵋᵮᵴ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᵑᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵏᴾᵲᶓᶐᶐᶃᶒᵆᵒᵓᵱᵲᵋᵒᵟᵧᵇᵤᵋᵮᵴ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵏᴾᵲᵋᵿᶖᶇᶑ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵕᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵖᴾᵟᵧᴾᵢᶐᶇᶔᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵐᴾᵟᵧᴾᵢᶐᶇᶔᶃ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᵒᴾᵟᵧᴾᵢᶐᶇᶔᶃ
Ver.2.0
MACHINE COMPONENT (8)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵐᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵐᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᴾᵡᵿᶐᶐᶇᵿᶅᶃᴾᵡᶍᶔᶃᶐᴾᵠᶐᵿᶁᶉᶃᶒᴾᵩᶇᶒ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵎᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵗᴾᵱᶊᶇᶂᶃ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵔᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵖᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵏᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵒᵊᵏᵓᴾᵱᶊᶇᶂᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵕᴾᵱᶊᶇᶂᶃ
ᵚᵱᶊᶇᶂᶃᵜ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵏᵑᴾᵱᶊᶇᶂᶃ
Ver.2.0
MACHINE COMPONENT (9)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵗᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵒᵊᵐᵓᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵔᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵎᵊᵑᵏᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵖᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵑᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵐᵕᴾᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃ
ᵚᵫᶍᶔᵿᶀᶊᶃᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵑᵖᵏᵋᵋᵋ
Ver.2.0
MACHINE COMPONENT (10)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵔᴾᵫᶍᶔᵿᶀᶊᶃᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵑᵊᵑᵒᴾᵫᶍᶔᵿᶀᶊᶃᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵐᴾᵫᶍᶔᵿᶀᶊᶃᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵓᴾᵫᶍᶔᵿᶀᶊᶃᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃ
ᵚᵫᶍᶔᵿᶀᶊᶃᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵓᵏᵓᵋᵋᵋ
Ver.2.0
MACHINE COMPONENT (11)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵑᵖᵊᵑᵗᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵖᵊᵒᵗᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵒᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵎᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵓᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵐᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵑᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵔᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵎᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵕ
ᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵒᵏᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵚᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵔᵑᵎᵋᵋᵋ
Ver.2.0
MACHINE COMPONENT (12)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵕᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵏᵊᵓᵐᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵔᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵑᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵓᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵒᴾᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᴾᵫᵆᵣᵇ
ᵚᵱᶒᵿᶒᶇᶍᶌᵿᶐᶗᴾᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵔᵒᵎᵋᵋᵋ
Ver.2.0
MACHINE COMPONENT (13)
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵗᵊᵔᵓᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵓᵗᵊᵔᵏᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵕᵓᴾᵡᶍᶔᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵐᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵒᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵎᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵑᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵳᶌᶇᶒᴾᵬᶍᵌᴾᵔᵔᴾᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃ
ᵚᵡᶃᶌᶒᶃᶐᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵐᵐᵗᵋᵋᵋ
Ver.2.0
CONTENTS (1)
1 Frame Cover 2 Upper Turret Cover(F) 3 Upper Turret Cover(R) 4 Lower Turret Cover(F)
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ
5 Lower Turret Cover(R) 6 Carriage Cover 7 Carriage Cover Bracket Kit 8 Drive Cooling ASSY
ᵢ
ᵡ ᵿ
ᶀ
ᶀ
ᵠ ᶁ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵿ
ᵢᵣᵲᵟᵧᵪᴾᵣ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵢᵣᵲᵟᵧᵪᴾᵢ
Ver.2.0
CONTENTS (2)
9 Drive(1)-5/6 9 Drive(1)-6/6 10 Drive(2) 11 T-axis-1/2
ᵥ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵦ
ᵢᵣᵲᵟᵧᵪᴾᵤ ᵢᵣᵲᵟᵧᵪᴾᵥ
ᵢᵣᵲᵟᵧᵪᴾᵟ
Ver.2.0
CONTENTS (3)
17 Slide(6) 18 Slide(7) 19 Slide(8) 20 Slide(9)
25 Movable Front Table(3) 26 Movable Front Table(4) 27 Movable Front Table(5) 28 Movable Front Table(6)
Ver.2.0
CONTENTS (4)
29 Movable Front Table(7) 30 Movable Front Table(8) 31 Movable Front Table(9) 32 Movable Rear Table(1)
ᵚᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ ᵚᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
33 Movable Rear Table(2) 34 Movable Rear Table(3) 35 Movable Rear Table(4) 36 Movable Rear Table(5)
ᵚᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ ᵚᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
37 Movable Table Shipping 38 Stationary Front Table M(E)(1) 39 Stationary Front Table M(E)(2) 40 Stationary Front Table M(E)(3)
Ver.2.0
CONTENTS (5)
41 Stationary Front Table M(E)(4) 42 Stationary Front Table M(E)(5) 43 Stationary Front Table M(E)(6) 44 Stationary Front Table M(E)(7)-1/2
44 Stationary Front Table M(E)(7)-2/2 45 Stationary Front Table M(E)(8) 46 Stationary Front Table M(E)(9) 47 Stationary Front Table M(E)(10)
ᵢᵣᵲᵟᵧᵪᴾᵟ
48 Stationary Front Table M(E)(11) 49 Stationary Front Table M(E)(12) 50 Stationary Front Table M(E)(13) 51 Stationary Rear Table M(E)(1)
Ver.2.0
CONTENTS (6)
52 Stationary Rear Table M(E)(2) 53 Stationary Rear Table M(E)(3) 54 Stationary Rear Table M(E)(4) 55 Stationary Rear Table M(E)(5)
56 Stationary Rear Table M(E)(6) 57 Stationary Rear Table M(E)(7) 58 Stationary Table Shipping 59 Center Table(1)
ᶇ
ᶈ
ᶃ
ᶄ
ᶁ
ᶂ
ᵿ
ᶀ
ᶅ
ᶆ ᶃ
ᶄ
ᶇ
ᵿ ᶈ
ᶀ
ᶁ
ᶂ
Ver.2.0
CONTENTS (7)
64 Center Table(6) 65 Center Table(7) 66 Center Table(8) 67 Reposition Brush Table(1)
68 Reposition Brush Table(2) 69 Reposition Brush Table(3) 70 Reposition Brush Table(Lower Cylinder Rise-type)(1) 71 Reposition Brush Table(Lower Cylinder Rise-type)(2)
72 Reposition Brush Table(Lower Cylinder Rise-type)(3) 73 Reposition Brush Table Installation Kit 74 CL Table 75 Cover Table
Ver.2.0
CONTENTS (8)
76 Front Guard Kit 77 Junction Box C 78 Cylinder Piping(for Brush Table) 79 Cable(for Brush Table)
ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵢᵣᵲᵟᵧᵪᴾᵠ
Ver.2.0
CONTENTS (9)
87 Lubrication(6) 88 Foot Switch 89 Foot Switch Cable 90 Electric(1)
ᵟ ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵟ ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵠ
Ver.2.0
CONTENTS (10)
99 Main Control Box(Built-in)(3) 100 Turret(58ST-2AI)F-PV(1) 101 Turret(58ST-2AI)F-PV(2) 102 Turret(58ST-2AI)F-PV(3)
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
Ver.2.0
CONTENTS (11)
110 Turret(58ST-2AI)F-PV(11)-1/2 110 Turret(58ST-2AI)F-PV(11)-2/2 111 Turret(58ST-2AI)F-PV(12)-1/2 111 Turret(58ST-2AI)F-PV(12)-2/2
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵠ ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵚᵢᶇᶃᴾᵦᶍᶊᶂᶃᶐᴾᵟᶐᶐᵿᶌᶅᶃᶋᶃᶌᶒᴾᵢᶐᵿᶕᶇᶌᶅᵜ ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵢᵣᵲᵟᵧᵪᴾᵟ
Ver.2.0
CONTENTS (12)
119 Turret(45ST-4AI)F-PV(5) 120 Turret(45ST-4AI)F-PV(6)-1/2 120 Turret(45ST-4AI)F-PV(6)-2/2 121 Turret(45ST-4AI)F-PV(7)
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
ᵚᵢᶇᶃᴾᵦᶍᶊᶂᶃᶐᴾᵟᶐᶐᵿᶌᶅᶃᶋᶃᶌᶒᴾᵢᶐᵿᶕᶇᶌᶅᵜ
ᵚᵐᵀᵜ ᵚᵏᵋᵏᵍᵒᵀᵜ ᵚᵏᵍᵐᵀᵜ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵠ
ᵠ ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵟ
Ver.2.0
CONTENTS (13)
127 Turret(45ST-4AI)F-PV(13)-2/2 128 Turret(45ST-4AI)F-PV(14)-1/2 128 Turret(45ST-4AI)F-PV(14)-2/2 129 Turret(45ST-4AI)F-PV(15)-1/2
ᵢᵣᵲᵟᵧᵪᴾᵠ ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵠ
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵟ ᵟ
Ver.2.0
CONTENTS (14)
137 AI Drive(6) 138 AI Drive(7) 139 Middle Drive(Upper) 140 Middle Drive(Lower)
ᵿ ᵿ
ᵿ ᵿ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵟ
141 Turret Drive(Upper)(1) 142 Turret Drive(Upper)(2) 143 Turret Drive(Lower)(1) 144 Turret Drive(Lower)(2)
ᵟ ᵟ
ᵟ ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵟ
145 Power Vacuum 146 Air Blow Unit-1/2 146 Air Blow Unit-2/2 147 Repositioning(1)
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
Ver.2.0
CONTENTS (15)
148 Repositioning(2) 149 Lower Cylinder Rise-type 150 Pneumatic(1)-1/2 150 Pneumatic(1)-2/2
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵱᵣᵡᵲᵧᵭᵬᴾᵡᵋᵡ
ᵱᵣᵡᵲᵧᵭᵬᴾᵠᵋᵠ
ᵠ ᵠ
ᵡ ᵡ
151 Pneumatic(2) 152 Punch Assembly Jig 153 Alignment Jig S(1) 154 Alignment Jig S(2)
155 Alignment Jig L(1) 156 Alignment Jig L(2) 157 Alignment Jig L(3) 158 Alignment Jig L(4)
Ver.2.0
CONTENTS (16)
159 1-1/4"AI Alignment Jig 160 2"AI Alignment Jig 161 Bar Code Reader 162 Pneumatic(3)-1/6
ᵠ
ᵣ ᵤ ᵣ ᵤ
ᵢ ᵢ
ᵱᵣᵡᵲᵧᵭᵬᴾᵢᵋᵢ
ᵚᴾᵪᶇᶑᶒᴾᵭᶌᶊᶗᴾᵜ
ᵱᵣᵡᵲᵧᵭᵬᴾᵦᵋᵦ ᵴᵧᵣᵵᴾᵧ
Ver.2.0
CONTENTS (17)
166 Pneumatic(7) 167 Pneumatic(8) 168 Pneumatic(9)
Ver.2.0
Unit No. 1
1 FrameCover
Frame Cover From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵒᵓᵋᵋᵋ
Ver.2.0 -1-
Unit No. 1
Frame Cover From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -2-
Unit No. 2
2 UpperTurret
Upper Turret Cover(F)
Cover(F) From Serial No.22510001 and after
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ
ᵔᵖᵗᵕᵑᵒᵔᵋᵋᵋ
Ver.2.0 -3-
Unit No. 2
Upper Turret Cover(F) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
17 74382078 Flange Socket Bolt P330468006 M8X15 NISSAN NEJI 2 List Only
Ver.2.0 -4-
Unit No. 3
3 UpperTurret
Upper Turret Cover(R)
Cover(R) From Serial No.22510001 and after
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ ᵔᵖᵗᵕᵑᵒᵕᵋᵋᵋ
Ver.2.0 -5-
Unit No. 3
Upper Turret Cover(R) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -6-
Unit No. 4
4 LowerTurret
Lower Turret Cover(F)
Cover(F) From Serial No.22510001 and after
ᵲᵿᶀᶊᶃᴾᵠᵿᶑᶃ
ᵔᵖᵗᵕᵐᵔᵓᵋᵋᵋ
Ver.2.0 -7-
Unit No. 4
Lower Turret Cover(F) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -8-
Unit No. 4
Lower Turret Cover(F) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -9-
Unit No. 5
5 LowerTurret
Lower Turret Cover(R)
Cover(R) From Serial No.22510001 and after
ᵔᵖᵗᵏᵑᵎᵔᵠ
Ver.2.0 -10-
Unit No. 5
Lower Turret Cover(R) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -11-
Unit No. 6
6 Carriage
Carriage Cover
Cover From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵖᵕᵋᵋᵋ
Ver.2.0 -12-
Unit No. 6
Carriage Cover From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74571128 Hex Soc Cap Screw with Washer P330498013 GT-LA-M8X12 GOSHO Works 22
Ver.2.0 -13-
Unit No. 7
7 Carriage
Carriage Cover
Cover Bracket
Bracket Kit
Kit From Serial No.22510001 and after
ᵡᵿᶐᶐᶇᵿᶅᶃ
ᵔᵖᵗᵒᵓᵗᵗ
Ver.2.0 -14-
Unit No. 7
Carriage Cover Bracket Kit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -15-
Unit No. 8
8 Drive
Drive Cooling
Cooling ASSY
ASSY From Serial No.22510001 and after
ᵔᵖᵗᵑᵓᵔᵏᵠ
Ver.2.0 -16-
Unit No. 8
Drive Cooling ASSY From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -17-
Unit No. 9
9 Drive(1)
Drive(1)-1/6 From Serial No.22510001 and after
ᵡ
ᵿ
ᵿ
ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -18-
Unit No. 9
Drive(1)-2/6 From Serial No.22510001 and after
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵧᶌᶂᶃᶖᴾᵓᵔᵋᵔᵗ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -19-
Unit No. 9
Drive(1)-3/6 From Serial No.22510001 and after
ᶀ
ᶀ
ᶁ
ᶁ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵚᵰᶃᵿᶐᴾᵴᶇᶃᶕᵜ
ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -20-
Unit No. 9
Drive(1)-4/6 From Serial No.22510001 and after
ᵢ
ᵢᵣᵲᵟᵧᵪᴾᵣ
ᵢᵣᵲᵟᵧᵪᴾᵢ ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -21-
Unit No. 9
Drive(1)-5/6 From Serial No.22510001 and after
ᵤ
ᵢᵣᵲᵟᵧᵪᴾᵤ ᵢᵣᵲᵟᵧᵪᴾᵥ
ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -22-
Unit No. 9
Drive(1)-6/6 From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵦ
ᵔᵖᵗᵒᵕᵗᵎᵋᵋᵠ
Ver.2.0 -23-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -24-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -25-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -26-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
3 A - T F 1 0 0 3 X 1 G D T B T T T / NTN
65 74450076 Bearing 7834759 1
G51PX1+TKZ0462
Ver.2.0 -27-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -28-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -29-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -30-
Unit No. 9
Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
138 74451528 One Touch Fitting P586563123 KQ2L08-01S (Reducer Elbow) SMC 1
Ver.2.0 -31-
Unit No. 10
10 Drive(2)
Drive(2) <Striker>
<Striker> From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵟ
ᵔᵖᵗᵒᵎᵒᵕ
Ver.2.0 -32-
Unit No. 10
Drive(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -33-
Unit No. 10
Drive(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
20 74451137 Air Cylinder (Compact Type) 7831679 CQ2B40-40 SMC 2 with Index 21
Ver.2.0 -34-
Unit No. 11
11 T-axis
T-axis-1/2 From Serial No.22510001 and after
ᵔᵖᵗᵒᵎᵑᵔᵋᵋᵟ
Ver.2.0 -35-
Unit No. 11
T-axis-2/2 From Serial No.22510001 and after
ᵱᶃᶃᴾᵮᵿᶅᶃᵋᵏᵍᵐ
ᵔᵖᵗᵒᵎᵑᵔᵋᵋᵟ
Ver.2.0 -36-
Unit No. 11
T-axis From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -37-
Unit No. 11
T-axis From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -38-
Unit No. 11
T-axis From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -39-
Unit No. 12
12 Slide(1)
Slide(1)-1/3 From Serial No.22510001 and after
ᵱᶃᶃᴾᵮᵿᶅᶃᴾᵐᵍᵑ
ᵱᶃᶃᴾᵮᵿᶅᶃᴾᵑᵍᵑ
ᵷᵋᵿᶖᶇᶑ
ᵔᵖᵗᵕᵑᵔᵔᵋᵋᵋ
ᵔᵖᵗᵕᵑᵎᵕᵋᵋᵋ
Ver.2.0 -40-
Unit No. 12
Slide(1)-2/3 From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵟ
ᵔᵖᵗᵕᵑᵔᵔᵋᵋᵋ
ᵔᵖᵗᵕᵑᵎᵕᵋᵋᵋ
Ver.2.0 -41-
Unit No. 12
Slide(1)-3/3 From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵔᵔᵋᵋᵋ
ᵔᵖᵗᵕᵑᵎᵕᵋᵋᵋ
Ver.2.0 -42-
Unit No. 12
Slide(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -43-
Unit No. 12
Slide(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -44-
Unit No. 12
Slide(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -45-
Unit No. 12
Slide(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -46-
Unit No. 13
13 Slide(2)
Slide(2) <Lubrication
<Lubrication Block
Block C/R C/R ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵗᵒᵔ
Ver.2.0 -47-
Unit No. 13
Slide(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -48-
Unit No. 14
14 Slide(3)
Slide(3) <Scale
<Scale ASSY(mm)>
ASSY(mm)> From Serial No.22510001 and after
ᵔᵓᵗᵖᵗᵐᵏ
Ver.2.0 -49-
Unit No. 14
Slide(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -50-
Unit No. 15
15 Slide(4)
Slide(4) <Scale
<Scale ASSY(inch)>
ASSY(inch)> From Serial No.22510001 and after
ᵔᵓᵗᵕᵏᵎᵓ
Ver.2.0 -51-
Unit No. 15
Slide(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -52-
Unit No. 16
16 Slide(5)
Slide(5) <Slide<Slide
Unit> Unit> From Serial No.22510001 and after
ᶒᶍᴾᵱᶓᶀᶁᶍᶌᶒᶐᶍᶊᴾᵮᵿᶌᶃᶊᴾᵟ
ᵡᵿᶐᶐᶇᵿᶅᶃ
ᵔᵖᵗᵕᵑᵔᵗᵋᵋᵋ
Ver.2.0 -53-
Unit No. 16
Slide(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -54-
Unit No. 16
Slide(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -55-
Unit No. 17
17 Slide(6)
Slide(6) <X-axis
<X-axis Dog Bracket
Dog Bracket ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵒᵒᵒᵟ
Ver.2.0 -56-
Unit No. 17
Slide(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -57-
Unit No. 18
18 Slide(7)
Slide(7) <Workclamp
<Workclamp Manifold
Manifold F ASSY>
F ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵒᵑᵗ
Ver.2.0 -58-
Unit No. 18
Slide(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -59-
Unit No. 19
19 Slide(8)
Slide(8) <Workclamp
<Workclamp Manifold
Manifold C ASSY>
C ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵗᵒᵕ
Ver.2.0 -60-
Unit No. 19
Slide(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -61-
Unit No. 20
20 Slide(9)
Slide(9) <Workclamp
<Workclamp Manifold
Manifold R ASSY>
R ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵒᵒᵎ
Ver.2.0 -62-
Unit No. 20
Slide(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -63-
Unit No. 21
21 Slide(10)
Slide(10) <Override
<Override Detection
Detection ASSY>
ASSY> From Serial No.22510001 and after
ᵿ
ᵿ
ᵔᵖᵗᵑᵕᵏᵖ
Ver.2.0 -64-
Unit No. 21
Slide(10) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -65-
Unit No. 22
22 Slide(11)
Slide(11) <Junction
<Junction Box X>
Box X> From Serial No.22510001 and after
ᵔᵖᵗᵑᵓᵕᵓᵟ
Ver.2.0 -66-
Unit No. 22
Slide(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74569457 Sems Pan Head Screw P334200114 M4X8(Chromate P-4) SANKO Industry 3
5 74570033 Sems Pan Head Screw P334200134 M5X10(Chromate P-4) SANKO Industry 4
7 74575020 Sems Pan Head Screw P334200144 M3X6(Chromate P-4) SANKO Industry 5
Ver.2.0 -67-
Unit No. 23
23 Movable
Movable Front
Front Table(1)
Table(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵎᵋᵋᵋ
Ver.2.0 -68-
Unit No. 23
Movable Front Table(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -69-
Unit No. 24
24 Movable
Movable Front
Front Table(2)
Table(2) <Movable
<Movable Front Front Table ASSY>
Table ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵔᵓᵋᵋᵋ
Ver.2.0 -70-
Unit No. 24
Movable Front Table(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -71-
Unit No. 25
25 Movable
Movable Front
Front Table(3)
Table(3) <Front<Front Table ASSY>
Table Brush Brush ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵏᵋᵋᵋ
Ver.2.0 -72-
Unit No. 25
Movable Front Table(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -73-
Unit No. 26
26 Movable
Movable Front
Front Table(4)
Table(4) <F/B
<F/B Up Up (Movable
(Movable Table)>
Table)> From Serial No.22510001 and after
ᵔᵖᵗᵒᵖᵔᵕ
Ver.2.0 -74-
Unit No. 26
Movable Front Table(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -75-
Unit No. 27
27 Movable
Movable Front
Front Table(5)
Table(5) <Front<Front Table Kit>
Table Piping Piping Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵖᵏᵋᵋᵋ
Ver.2.0 -76-
Unit No. 27
Movable Front Table(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -77-
Unit No. 28
28 Movable
Movable Front
Front Table(6)
Table(6) <Front<Front Table Installation
Table Installation Kit> Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵖᵐᵋᵋᵋ
Ver.2.0 -78-
Unit No. 28
Movable Front Table(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -79-
Unit No. 29
29 Movable
Movable Front
Front Table(7)
Table(7) <Name
<Name PlatePlate
Kit> Kit> From Serial No.22510001 and after
ᵚᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ ᵚᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵑᵖᵒᵋᵋᵋ
Ver.2.0 -80-
Unit No. 29
Movable Front Table(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -81-
Unit No. 30
30 Movable
Movable Front
Front Table(8)
Table(8) <Scale
<Scale ASSY(mm)
ASSY(mm) 100>
100> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵖᵋᵋᵋ
Ver.2.0 -82-
Unit No. 30
Movable Front Table(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -83-
Unit No. 31
31 Movable
Movable Front
Front Table(9)
Table(9) <Scale
<Scale ASSY(inch)
ASSY(inch) 100> 100> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵗᵋᵋᵋ
Ver.2.0 -84-
Unit No. 31
Movable Front Table(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -85-
Unit No. 32
32 Movable
Movable Rear
Rear Table(1)
Table(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵓᵋᵋᵋ
Ver.2.0 -86-
Unit No. 32
Movable Rear Table(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -87-
Unit No. 33
33 Movable
Movable Rear
Rear Table(2)
Table(2) <Movable
<Movable RearRear
TableTable ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵔᵔᵋᵋᵋ
Ver.2.0 -88-
Unit No. 33
Movable Rear Table(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -89-
Unit No. 34
34 Movable
Movable Rear
Rear Table(3)
Table(3) <Rear
<Rear TableTable
BrushBrush ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵏᵔᵋᵋᵋ
Ver.2.0 -90-
Unit No. 34
Movable Rear Table(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -91-
Unit No. 35
35 Movable
Movable Rear
Rear Table(4)
Table(4) <Rear
<Rear TableTable Installation
Installation Kit> Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵗᵓᵋᵋᵋ
Ver.2.0 -92-
Unit No. 35
Movable Rear Table(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -93-
Unit No. 36
36 Movable
Movable Rear
Rear Table(5)
Table(5) <Name
<Name Plate
Plate Kit>
Kit> From Serial No.22510001 and after
ᵚᵰᶃᵿᶐᴾᵲᵿᶀᶊᶃᵜ ᵚᵤᶐᶍᶌᶒᴾᵲᵿᶀᶊᶃᵜ
ᵔᵖᵗᵕᵑᵖᵒᵋᵋᵋ
Ver.2.0 -94-
Unit No. 36
Movable Rear Table(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -95-
Unit No. 37
37 Movable
Movable Table
Table Shipping
Shipping From Serial No.22510001 and after
ᵔᵖᵗᵕᵑᵗᵖᵋᵋᵋ
Ver.2.0 -96-
Unit No. 37
Movable Table Shipping From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -97-
Unit No. 38
38 Stationary
Stationary FrontFront
Table Table M(E)(1)
M(E)(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵎᵋᵋᵋ
Ver.2.0 -98-
Unit No. 38
Stationary Front Table M(E)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -99-
Unit No. 39
39 Stationary
Stationary FrontFront
Table Table M(E)(2)
M(E)(2) <Stationary
<Stationary Front
Front Table Table
MDF BrushMDF Brush ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵏᵋᵋᵋ
Ver.2.0 -100-
Unit No. 39
Stationary Front Table M(E)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -101-
Unit No. 40
40 Stationary
Stationary FrontFront
Table Table M(E)(3)
M(E)(3) <Stationary
<Stationary Front
Front Table Table
Frame Frame ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵐᵋᵋᵋ
Ver.2.0 -102-
Unit No. 40
Stationary Front Table M(E)(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -103-
Unit No. 41
41 Stationary
Stationary FrontFront
Table Table M(E)(4)
M(E)(4) <Stationary
<Stationary Front
Front Table Table
Stand Stand Kit>
Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵑᵋᵋᵋ
Ver.2.0 -104-
Unit No. 41
Stationary Front Table M(E)(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -105-
Unit No. 42
42 Stationary
Stationary FrontFront
Table Table M(E)(5)
M(E)(5) <F/B Up<F/B Up (Stationary
(Stationary Table)> Table)> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵕᵋᵋᵋ
Ver.2.0 -106-
Unit No. 42
Stationary Front Table M(E)(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -107-
Unit No. 43
43 Stationary
Stationary FrontFront
Table Table M(E)(6)
M(E)(6) <F/B Up<F/B Up (Movable
(Movable Table)>
Table)> From Serial No.22510001 and after
ᵔᵖᵗᵒᵖᵔᵕ
Ver.2.0 -108-
Unit No. 43
Stationary Front Table M(E)(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -109-
Unit No. 44
44 Stationary
Stationary FrontFront
Table Table M(E)(7)
M(E)(7)-1/2 <Junction
<Junction Box F>
Box F> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵖᵋᵋᵋ
Ver.2.0 -110-
Unit No. 44
Stationary Front Table M(E)(7)-2/2 <Junction Box F> From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵕᵔᵒᵖᵋᵋᵋ
ᵆᵔᵖᵐᵒᵕᵔᵏᵟᵇ
Ver.2.0 -111-
Unit No. 44
Stationary Front Table M(E)(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74570030 Sems Pan Head Screw P334200115 M4X10(Chromate P-4) SANKO Industry 4
5 74570033 Sems Pan Head Screw P334200134 M5X10(Chromate P-4) SANKO Industry 4
13 74569811 Sems Pan Head Screw P334200113 M4X6(Chromate P-4) SANKO Industry 5
16 74570051 Sems Pan Head Screw P334200109 M3X10(Chromate P-4) SANKO Industry 4
Ver.2.0 -112-
Unit No. 44
Stationary Front Table M(E)(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -113-
Unit No. 45
45 Stationary
Stationary FrontFront
Table Table M(E)(8)
M(E)(8) <Pneumatic
<Pneumatic X-gaugeX-gauge Block ASSY>
Block ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵖᵋᵋᵋ
Ver.2.0 -114-
Unit No. 45
Stationary Front Table M(E)(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -115-
Unit No. 46
46 Stationary
Stationary FrontFront
Table Table M(E)(9)
M(E)(9) <Stationary
<Stationary Front
Front Table Table
Piping Piping Kit>
Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵎᵔᵋᵋᵋ
Ver.2.0 -116-
Unit No. 46
Stationary Front Table M(E)(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -117-
Unit No. 47
47 Stationary
Stationary FrontFront
Table Table M(E)(10)
M(E)(10) <FrontKit>
<Front Guard Guard Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵑᵗᵋᵋᵋ
Ver.2.0 -118-
Unit No. 47
Stationary Front Table M(E)(10) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -119-
Unit No. 48
48 Stationary
Stationary FrontFront
Table Table M(E)(11)
M(E)(11) <Scale <Scale ASSY(mm)
ASSY(mm) 100> 100> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵐᵔᵋᵋᵋ
Ver.2.0 -120-
Unit No. 48
Stationary Front Table M(E)(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -121-
Unit No. 49
49 Stationary
Stationary FrontFront
Table Table M(E)(12)
M(E)(12) <Scale <Scale ASSY(inch)
ASSY(inch) 100> 100> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵐᵕᵋᵋᵋ
Ver.2.0 -122-
Unit No. 49
Stationary Front Table M(E)(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -123-
Unit No. 50
50 Stationary
Stationary FrontFront
Table Table M(E)(13)
M(E)(13) <Name <Name Plate Kit>
Plate Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵎᵒᵋᵋᵋ
Ver.2.0 -124-
Unit No. 50
Stationary Front Table M(E)(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -125-
Unit No. 51
51 Stationary
Stationary Rear Rear
TableTable M(E)(1)
M(E)(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵎᵋᵋᵋ
Ver.2.0 -126-
Unit No. 51
Stationary Rear Table M(E)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -127-
Unit No. 52
52 Stationary
Stationary Rear Rear
TableTable M(E)(2)
M(E)(2) <Stationary
<Stationary RearMDF
Rear Table Table MDFASSY>
Brush Brush ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵏᵋᵋᵋ
Ver.2.0 -128-
Unit No. 52
Stationary Rear Table M(E)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -129-
Unit No. 53
53 Stationary
Stationary Rear Rear
TableTable M(E)(3)
M(E)(3) <Stationary
<Stationary RearFrame
Rear Table TableASSY>
Frame ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵐᵋᵋᵋ
Ver.2.0 -130-
Unit No. 53
Stationary Rear Table M(E)(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -131-
Unit No. 54
54 Stationary
Stationary Rear Rear
TableTable M(E)(4)
M(E)(4) <Stationary
<Stationary RearStand
Rear Table Table Stand Kit>
Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵑᵋᵋᵋ
Ver.2.0 -132-
Unit No. 54
Stationary Rear Table M(E)(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -133-
Unit No. 55
55 Stationary
Stationary Rear Rear
TableTable M(E)(5)
M(E)(5) <Rear Guard
<Rear Guard Kit> Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵒᵔᵋᵋᵋ
Ver.2.0 -134-
Unit No. 55
Stationary Rear Table M(E)(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -135-
Unit No. 56
56 Stationary
Stationary Rear Rear
TableTable M(E)(6)
M(E)(6) <Electric>
<Electric> From Serial No.22510001 and after
ᵡᵿᶀᶊᶃᴾᵱᵋᵏᵖ
ᵔᵖᵗᵕᵔᵒᵕᵋᵋᵋ
Ver.2.0 -136-
Unit No. 56
Stationary Rear Table M(E)(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -137-
Unit No. 57
57 Stationary
Stationary Rear Rear
TableTable M(E)(7)
M(E)(7) <Name<Name
Plate Plate
Kit> Kit> From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵏᵐᵋᵋᵋ
Ver.2.0 -138-
Unit No. 57
Stationary Rear Table M(E)(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -139-
Unit No. 58
58 Stationary
Stationary TableTable Shipping
Shipping From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵑᵓᵋᵋᵋ
Ver.2.0 -140-
Unit No. 58
Stationary Table Shipping From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -141-
Unit No. 59
59 Center
Center Table(1)
Table(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵐᵗᵋᵋᵋ
Ver.2.0 -142-
Unit No. 59
Center Table(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -143-
Unit No. 60
60 Center
Center Table(2)
Table(2) <Center
<Center Table Table F ASSY>
F ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵒᵖᵔᵎᵟ
Ver.2.0 -144-
Unit No. 60
Center Table(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -145-
Unit No. 61
61 Center
Center Table(3)
Table(3) <Center
<Center Table Table
Brush Brush F ASSY>
F ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵒᵖᵔᵏᵟ
Ver.2.0 -146-
Unit No. 61
Center Table(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -147-
Unit No. 62
62 Center
Center Table(4)
Table(4) <F/B(Stationary
<F/B Up Up (Stationary Table)>
Table)> From Serial No.22510001 and after
ᵔᵖᵗᵒᵎᵎᵕᵟ
Ver.2.0 -148-
Unit No. 62
Center Table(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -149-
Unit No. 63
63 Center
Center Table(5)
Table(5) <Center
<Center Table Table
PipingPiping
Kit> Kit> From Serial No.22510001 and after
ᶅ
ᶆ
ᶇ
ᶈ
ᶃ
ᶄ
ᶁ
ᶂ
ᵿ
ᶀ
ᶅ
ᶆ ᶃ
ᶄ
ᶇ
ᵿ ᶈ
ᶀ
ᶁ
ᶂ
ᵔᵖᵗᵒᵖᵒᵑ
Ver.2.0 -150-
Unit No. 63
Center Table(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -151-
Unit No. 64
64 Center
Center Table(6)
Table(6) <Center
<Center Table Table R ASSY>
R ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵑᵎᵋᵋᵋ
Ver.2.0 -152-
Unit No. 64
Center Table(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -153-
Unit No. 65
65 Center
Center Table(7)
Table(7) <Center
<Center Table Table
Brush Brush R ASSY>
R ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵑᵏᵋᵋᵋ
Ver.2.0 -154-
Unit No. 65
Center Table(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -155-
Unit No. 66
66 Center
Center Table(8)
Table(8) <Installation
<Installation Kit> Kit> From Serial No.22510001 and after
ᵔᵖᵗᵐᵒᵗᵗ
Ver.2.0 -156-
Unit No. 66
Center Table(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -157-
Unit No. 67
67 Reposition
Reposition Brush
Brush Table(1)
Table(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵑᵖᵋᵋᵋ
Ver.2.0 -158-
Unit No. 67
Reposition Brush Table(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -159-
Unit No. 68
68 Reposition
Reposition Brush
Brush Table(2)
Table(2) <Reposition
<Reposition BrushFTable
Brush Table F ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵑᵗᵋᵋᵋ
Ver.2.0 -160-
Unit No. 68
Reposition Brush Table(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -161-
Unit No. 69
69 Reposition
Reposition Brush
Brush Table(3)
Table(3) <Reposition
<Reposition BrushRTable
Brush Table R ASSY>
ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵒᵎᵋᵋᵋ
Ver.2.0 -162-
Unit No. 69
Reposition Brush Table(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -163-
Unit No. 70
70 Reposition
Reposition Brush
Brush Table(Lower
Table(Lower Cylinder
Cylinder Rise-type)(1)
Rise-type)(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵖᵓᵋᵋᵋ
Ver.2.0 -164-
Unit No. 70
Reposition Brush Table(Lower Cylinder Rise-type)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -165-
Unit No. 71
71 Reposition
Reposition Brush
Brush Table(Lower
Table(Lower Cylinder
Cylinder Rise-type)(2)
Rise-type)(2) <Reposition
<Reposition Brush
Brush Table Table F ASSY>
F ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵖᵔᵋᵋᵋ
Ver.2.0 -166-
Unit No. 71
Reposition Brush Table(Lower Cylinder Rise-type)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -167-
Unit No. 72
72 Reposition
Reposition Brush
Brush Table(Lower
Table(Lower Cylinder
Cylinder Rise-type)(3)
Rise-type)(3) <Reposition
<Reposition Brush
Brush Table Table R ASSY>
R ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵖᵕᵋᵋᵋ
Ver.2.0 -168-
Unit No. 72
Reposition Brush Table(Lower Cylinder Rise-type)(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -169-
Unit No. 73
73 Reposition
Reposition Brush
Brush TableTable Installation
Installation Kit Kit From Serial No.22510001 and after
ᵰᶃᶎᶍᶑᶇᶒᶇᶍᶌᴾᵠᶐᶓᶑᶆᴾᵲᵿᶀᶊᶃ
ᵔᵖᵗᵕᵐᵒᵏᵋᵋᵋ
Ver.2.0 -170-
Unit No. 73
Reposition Brush Table Installation Kit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -171-
Unit No. 74
74 CL
CL Table
Table From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵔᵐᵋᵋᵋ
Ver.2.0 -172-
Unit No. 74
CL Table From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -173-
Unit No. 75
75 Cover
Cover Table
Table From Serial No.22510001 and after
ᵔᵖᵗᵐᵓᵎᵑ
Ver.2.0 -174-
Unit No. 75
Cover Table From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -175-
Unit No. 76
76 Front
Front Guard
Guard Kit
Kit From Serial No.22510001 and after
ᵡᵿᶀᶊᶃᴾᵱᵋᵏᵗ
ᵔᵖᵗᵕᵓᵑᵑᵋᵋᵋ
Ver.2.0 -176-
Unit No. 76
Front Guard Kit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -177-
Unit No. 77
77 Junction
Junction Box Box
C C From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵕᵐᵑᵕᵋᵋᵋ
Ver.2.0 -178-
Unit No. 77
Junction Box C From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
3 74570033 Sems Pan Head Screw P334200134 M5X10(Chromate P-4) SANKO Industry 4
9 74569811 Sems Pan Head Screw P334200113 M4X6(Chromate P-4) SANKO Industry 3 for Ground Wire
Ver.2.0 -179-
Unit No. 78
78 Cylinder
Cylinder Piping(for
Piping(for Brush Table)
Brush Table) From Serial No.22510001 and after
ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ
ᵔᵖᵗᵕᵐᵕᵒᵋᵋᵋ
Ver.2.0 -180-
Unit No. 78
Cylinder Piping(for Brush Table) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -181-
Unit No. 79
79 Cable(for
Cable(for Brush
Brush Table)
Table) From Serial No.22510001 and after
ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ
ᵔᵖᵗᵕᵓᵑᵏᵋᵋᵋ
Ver.2.0 -182-
Unit No. 79
Cable(for Brush Table) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -183-
Unit No. 80
80 Workclamp(1)
Workclamp(1)-1/2 From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵓᵕ
ᵧᶌᶂᶃᶖᴾᵑᵋᵏᵒ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵔᵖᵗᵕᵐᵎᵗᵟ
Ver.2.0 -184-
Unit No. 80
Workclamp(1)-2/2 From Serial No.22510001 and after
ᵡ
Ver.2.0 -185-
Unit No. 80
Workclamp(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74613243 L Workclamp Base ASSY S420101--- 6891295,6891296,6891298 & Others 1 Index 3-14
Ver.2.0 -186-
Unit No. 80
Workclamp(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -187-
Unit No. 80
Workclamp(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -188-
Unit No. 81
81 Workclamp(2)
Workclamp(2) <Piping>
<Piping> From Serial No.22510001 and after
ᴾᵔᵖᵗᵏᵐᵗᵏ
ᵆᵔᵖᵕᵕᵖᵔᵎᵡᵇ
Ver.2.0 -189-
Unit No. 81
Workclamp(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -190-
Unit No. 82
82 Lubrication(1)
Lubrication(1) From Serial No.22510001 and after
ᵔᵖᵗᵕᵐᵓᵎᵋᵋᵋ
Ver.2.0 -191-
Unit No. 82
Lubrication(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
7 74569040 Saddle for Conduit P381017110 PZ0108(D6.2) DAIWA DENGYO 4 List Only
Ver.2.0 -192-
Unit No. 83
83 Lubrication(2)
Lubrication(2) <Centralized
<Centralized Lubrication
Lubrication ASSY> ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵏᵗᵐᵕ
Ver.2.0 -193-
Unit No. 83
Lubrication(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -194-
Unit No. 84
84 Lubrication(3)
Lubrication(3) <P-axis
<P-axis CoolingCooling Solenoid>
Solenoid> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵓ
ᵔᵖᵗᵑᵕᵐᵑ
Ver.2.0 -195-
Unit No. 84
Lubrication(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
1 74450280 P-axis Cooling Solenoid ASSY 7831649 VXD2130-02-5DS1-B-X623 SMC 1 Index 2-5 / YV40
Ver.2.0 -196-
Unit No. 85
85 Lubrication(4)
Lubrication(4) <Grease
<Grease Pump>
Pump> From Serial No.22510001 and after
ᵔᵖᵗᵑᵓᵎᵐᵋᵋᵠ
Ver.2.0 -197-
Unit No. 85
Lubrication(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -198-
Unit No. 86
86 Lubrication(5)
Lubrication(5) <Automatic
<Automatic GreaseGrease Lubricator
Lubricator ASSY> ASSY> From Serial No.22510001 and after
ᵔᵖᵗᵒᵖᵑᵔᵋᵋᵟ
Ver.2.0 -199-
Unit No. 86
Lubrication(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -200-
Unit No. 87
87 Lubrication(6)
Lubrication(6) <Grease
<Grease Box Installation>
Box Installation> From Serial No.22510001 and after
ᵟ ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵔᵖᵗᵕᵐᵓᵕᵋᵋᵋ
Ver.2.0 -201-
Unit No. 87
Lubrication(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -202-
Unit No. 88
88 Foot
Foot Switch
Switch From Serial No.22510001 and after
ᵔᵖᵕᵏᵕᵒᵖ
Ver.2.0 -203-
Unit No. 88
Foot Switch From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -204-
Unit No. 89
89 Foot
Foot Switch
Switch Cable
Cable From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵟ
ᵤᶍᶍᶒᴾᵱᶕᶇᶒᶁᶆ
ᵔᵖᵗᵑᵕᵐᵗ
Ver.2.0 -205-
Unit No. 89
Foot Switch Cable From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -206-
Unit No. 90
90 Electric(1)
Electric(1) <Electrical
<Electrical Wiring> Wiring> From Serial No.22510001 and after
ᵚᵪᶇᶑᶒᴾᵭᶌᶊᶗᵜ
ᵔᵖᵗᵕᵒᵔᵓᵋᵋᵋ
Ver.2.0 -207-
Unit No. 90
Electric(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -208-
Unit No. 90
Electric(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -209-
Unit No. 91
91 Electric(2)
Electric(2) <Junction
<Junction Box S>
Box S> From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵔᵕᵋᵋᵟ
Ver.2.0 -210-
Unit No. 91
Electric(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74569456 Sems Pan Head Screw P334200133 M5X8(Chromate P-4) SANKO Industry 2
5 74570033 Sems Pan Head Screw P334200134 M5X10(Chromate P-4) SANKO Industry 4
6 74569457 Sems Pan Head Screw P334200114 M4X8(Chromate P-4) SANKO Industry 1
10 74575020 Sems Pan Head Screw P334200144 M3X6(Chromate P-4) SANKO Industry 9
Ver.2.0 -211-
Unit No. 92
92 Electric(3)
Electric(3) <Junction
<Junction Box Y>
Box Y> From Serial No.22510001 and after
ᵔᵖᵗᵑᵓᵖᵎᵟ
Ver.2.0 -212-
Unit No. 92
Electric(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
2 74569457 Sems Pan Head Screw P334200114 M4X8(Chromate P-4) SANKO Industry 3
5 74570033 Sems Pan Head Screw P334200134 M5X10(Chromate P-4) SANKO Industry 4
7 74575020 Sems Pan Head Screw P334200144 M3X6(Chromate P-4) SANKO Industry 5
Ver.2.0 -213-
Unit No. 93
93 Electric(4)
Electric(4) <Subcontrol
<Subcontrol Panel B>
Panel B> From Serial No.22510001 and after
ᵈ
ᵈ
ᵔᵖᵗᵐᵒᵏᵓᵟ
Ver.2.0 -214-
Unit No. 93
Electric(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
11 74570051 Sems Pan Head Screw P334200109 M3X10(Chromate P-4) SANKO Industry 4
12 74569811 Sems Pan Head Screw P334200113 M4X6(Chromate P-4) SANKO Industry 3
Ver.2.0 -215-
Unit No. 94
94 Electric(5)
Electric(5) <Subcontrol
<Subcontrol Panel BPanel B Installation>
Installation> From Serial No.22510001 and after
ᵱᶓᶀᶁᶍᶌᶒᶐᶍᶊᴾᵮᵿᶌᶃᶊᴾᵠ
ᵔᵖᵗᵕᵒᵕᵔᵋᵋᵋ
Ver.2.0 -216-
Unit No. 94
Electric(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -217-
Unit No. 95
95 Electric(6)
Electric(6) <Wiring<Wiring Duct Cover>
Duct Cover> From Serial No.22510001 and after
ᵔᵖᵗᵕᵒᵔᵗ
Ver.2.0 -218-
Unit No. 95
Electric(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -219-
Unit No. 95
Electric(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -220-
Unit No. 96
96 Electric(7)
Electric(7) <Tool Change
<Tool Change Door LS>
Door LS> From Serial No.22510001 and after
ᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᴾᵆᵤᵇ
ᵲᵿᶀᶊᶃᴾᵠᵿᶑᶃ
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵡᶍᶔᶃᶐᴾᵆᵤᵇ
ᵈ
ᵈ
ᵔᵖᵗᵕᵒᵕᵎᵋᵋᵋ
Ver.2.0 -221-
Unit No. 96
Electric(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -222-
Unit No. 96
Electric(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -223-
Unit No. 97
97 Main
Main Control
Control Box(Built-in)(1)
Box(Built-in)(1) From Serial No.22510001 and after
ᵫᵿᶇᶌᴾᵡᶍᶌᶒᶐᶍᶊᴾᵮᵿᶌᶃᶊ
ᵔᵖᵗᵕᵔᵏᵎᵋᵋᵋ
Ver.2.0 -224-
Unit No. 97
Main Control Box(Built-in)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -225-
Unit No. 98
98 Main
Main Control
Control Box(Built-in)(2)
Box(Built-in)(2) <NCASSY>
<NC Stand Stand ASSY> From Serial No.22510001 and after
ᵫᵿᶇᶌᴾᵡᶍᶌᶒᶐᶍᶊᴾᵮᵿᶌᶃᶊ
ᵔᵖᵗᵕᵔᵏᵐᵋᵋᵋ
Ver.2.0 -226-
Unit No. 98
Main Control Box(Built-in)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -227-
Unit No. 99
99 Main
Main Control
Control Box(Built-in)(3)
Box(Built-in)(3) <NCInstallation
<NC Stand Stand Installation
Kit> Kit> From Serial No.22510001 and after
ᵫᵿᶇᶌᴾᵡᶍᶌᶒᶐᶍᶊᴾᵠᶍᶖᴾᵱᶒᵿᶌᶂᴾᵟᵱᵱᵷ
ᵔᵖᵗᵕᵔᵏᵑᵋᵋᵋ
Ver.2.0 -228-
Unit No. 99
Main Control Box(Built-in)(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -229-
Unit No. 100
100 Turret(58ST-2AI)F-PV(1)
Turret(58ST-2AI)F-PV(1) <Upper<Upper Base Kit>
Base Kit> From Serial No.22510001 and after
ᵳᶎᶎᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵔᵖᵗᵒᵎᵐᵗᵋᵋᵟ
Ver.2.0 -230-
Unit No. 100
Turret(58ST-2AI)F-PV(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -231-
Unit No. 101
101 Turret(58ST-2AI)F-PV(2)
Turret(58ST-2AI)F-PV(2) <Upper<Upper Base ASSY>
Base ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵔᵖᵗᵒᵎᵐᵒᴾᴾᵟ
Ver.2.0 -232-
Unit No. 101
Turret(58ST-2AI)F-PV(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -233-
Unit No. 102
102 Turret(58ST-2AI)F-PV(3)
Turret(58ST-2AI)F-PV(3) <Upper<Upper
Turret Turret
Disk> Disk> From Serial No.22510001 and after
ᵔᵖᵗᵑᵎᵖᵕᵠ
Ver.2.0 -234-
Unit No. 102
Turret(58ST-2AI)F-PV(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -235-
Unit No. 103
103 Turret(58ST-2AI)F-PV(4)
Turret(58ST-2AI)F-PV(4) <Index<Index Pin ASSY(Upper
Pin ASSY(Upper Turret)>
Turret)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵑ
ᵔᵖᵕᵒᵒᵒᵓᵋᵋᵟ
Ver.2.0 -236-
Unit No. 103
Turret(58ST-2AI)F-PV(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
9 74454002 Air Cylinder (Compact Type) 7831566 A CDQ2B80-30-DCK9747K SMC 1 with Index 10,11
Ver.2.0 -237-
Unit No. 104
104 Turret(58ST-2AI)F-PV(5)
Turret(58ST-2AI)F-PV(5) <Upper<Upper
Tool> Tool> From Serial No.22510001 and after
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
Ver.2.0 -238-
Unit No. 104
Turret(58ST-2AI)F-PV(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -239-
Unit No. 105
105 Turret(58ST-2AI)F-PV(6)<Lower
Turret(58ST-2AI)F-PV(6)-1/2 <Lower Base
Base Kit>
Kit> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵪᶍᶕᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵤᶐᵿᶋᶃ
ᵱᶃᶃᴾᵮᵿᶅᶃᴾᵐᵍᵐ
ᵔᵖᵗᵒᵎᵏᵖᵠ
Ver.2.0 -240-
Unit No. 105
Turret(58ST-2AI)F-PV(6)-2/2 <Lower Base Kit> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵔᵖᵗᵒᵎᵏᵖᵠ
Ver.2.0 -241-
Unit No. 105
Turret(58ST-2AI)F-PV(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -242-
Unit No. 106
106 Turret(58ST-2AI)F-PV(7)
Turret(58ST-2AI)F-PV(7) <Lower<Lower Base ASSY>
Base ASSY> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵔᵖᵗᵒᵎᵐᵑᵠ
Ver.2.0 -243-
Unit No. 106
Turret(58ST-2AI)F-PV(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -244-
Unit No. 107
107 Turret(58ST-2AI)F-PV(8)
Turret(58ST-2AI)F-PV(8) <Lower<Lower
Turret Turret
Disk> Disk> From Serial No.22510001 and after
ᵔᵖᵗᵑᵎᵖᵖ
Ver.2.0 -245-
Unit No. 107
Turret(58ST-2AI)F-PV(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -246-
Unit No. 108
108 Turret(58ST-2AI)F-PV(9)
Turret(58ST-2AI)F-PV(9) <Index<Index Pin ASSY(Lower
Pin ASSY(Lower Turret)>
Turret)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵑ
ᵔᵖᵕᵒᵒᵒᵓᵋᵋᵟ
Ver.2.0 -247-
Unit No. 108
Turret(58ST-2AI)F-PV(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
9 74454002 Air Cylinder (Compact Type) 7831566 A CDQ2B80-30-DCK9747K SMC 1 with Index 10,11
Ver.2.0 -248-
Unit No. 109
109 Turret(58ST-2AI)F-PV(10)
Turret(58ST-2AI)F-PV(10) <Lower<Lower Tool>
Tool> From Serial No.22510001 and after
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
Ver.2.0 -249-
Unit No. 109
Turret(58ST-2AI)F-PV(10) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -250-
Unit No. 110
110 Turret(58ST-2AI)F-PV(11)<Die
Turret(58ST-2AI)F-PV(11)-1/2 <Die Holder>
Holder> From Serial No.22510001 and after
ᵚᵢᶇᶃᴾᵦᶍᶊᶂᶃᶐᴾᵟᶐᶐᵿᶌᶅᶃᶋᶃᶌᶒᴾᵢᶐᵿᶕᶇᶌᶅᵜ
ᵔᵖᵗᵑᵗᵕᵏ
Ver.2.0 -251-
Unit No. 110
Turret(58ST-2AI)F-PV(11)-2/2 <Die Holder> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵑᵋᵒᵎ ᵧᶌᶂᶃᶖᴾᵒᵐᵋᵒᵗ
ᵚᵑᵋᵏᵍᵐᵀᵆᵱᶗᶋᶀᶍᶊẅᵠᵇᵜ ᵚᵒᵋᵏᵍᵐᵀᵆᵱᶗᶋᶀᶍᶊẅᵟᵇᵜ
ᵔᵖᵗᵑᵗᵗᵎ
Ver.2.0 -252-
Unit No. 110
Turret(58ST-2AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -253-
Unit No. 110
Turret(58ST-2AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -254-
Unit No. 110
Turret(58ST-2AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -255-
Unit No. 111
111 Turret(58ST-2AI)F-PV(12)<1-1/4"AI
Turret(58ST-2AI)F-PV(12)-1/2 <1-1/4"AI Station(Upper)>
Station(Upper)> From Serial No.22510001 and after
ᵟ
ᵠ
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵒ ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵎᵐᵔᵋᵋᵟ
Ver.2.0 -256-
Unit No. 111
Turret(58ST-2AI)F-PV(12)-2/2 <1-1/4"AI Station(Upper)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵏᵋᵑᵑ
ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵳᶎᶎᶃᶐᵇ
ᵡ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵒᵎᵐᵔᵋᵋᵟ
Ver.2.0 -257-
Unit No. 111
Turret(58ST-2AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -258-
Unit No. 111
Turret(58ST-2AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -259-
Unit No. 111
Turret(58ST-2AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -260-
Unit No. 112
112 Turret(58ST-2AI)F-PV(13)<1-1/4"AI
Turret(58ST-2AI)F-PV(13)-1/2 <1-1/4"AI Station(Lower)>
Station(Lower)> From Serial No.22510001 and after
ᵟ ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵓ
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵒᵒᵕᵟ
Ver.2.0 -261-
Unit No. 112
Turret(58ST-2AI)F-PV(13)-2/2 <1-1/4"AI Station(Lower)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵏᵕᵋᵑᵐ
ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵪᶍᶕᶃᶐᵇ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵒᵒᵒᵕᵟ
Ver.2.0 -262-
Unit No. 112
Turret(58ST-2AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -263-
Unit No. 112
Turret(58ST-2AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -264-
Unit No. 112
Turret(58ST-2AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -265-
Unit No. 113
113 Turret(58ST-2AI)F-PV(14)
Turret(58ST-2AI)F-PV(14) <Support
<Support Plate>
Plate> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵔᵖᵗᵑᵏᵖᵕᵟ
Ver.2.0 -266-
Unit No. 113
Turret(58ST-2AI)F-PV(14) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -267-
Unit No. 114
114 Turret(58ST-2AI)F-PV(15)
Turret(58ST-2AI)F-PV(15) <Scrap<Scrap Guard>
Guard> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵕᵎᵋᵋᵋ
Ver.2.0 -268-
Unit No. 114
Turret(58ST-2AI)F-PV(15) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -269-
Unit No. 115
115 Turret(45ST-4AI)F-PV(1)
Turret(45ST-4AI)F-PV(1) <Upper<Upper Base Kit>
Base Kit> From Serial No.22510001 and after
ᵳᶎᶎᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵔᵖᵗᵒᵎᵐᵗᵋᵋᵟ
Ver.2.0 -270-
Unit No. 115
Turret(45ST-4AI)F-PV(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -271-
Unit No. 116
116 Turret(45ST-4AI)F-PV(2)
Turret(45ST-4AI)F-PV(2) <Upper<Upper Base ASSY>
Base ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵳᶎᶎᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵔᵖᵗᵒᵎᵐᵒᴾᴾᵟ
Ver.2.0 -272-
Unit No. 116
Turret(45ST-4AI)F-PV(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -273-
Unit No. 117
117 Turret(45ST-4AI)F-PV(3)
Turret(45ST-4AI)F-PV(3) <Upper<Upper
Turret Turret
Disk> Disk> From Serial No.22510001 and after
ᵔᵖᵗᵐᵎᵔᵑ
Ver.2.0 -274-
Unit No. 117
Turret(45ST-4AI)F-PV(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -275-
Unit No. 118
118 Turret(45ST-4AI)F-PV(4)
Turret(45ST-4AI)F-PV(4) <Index<Index Pin ASSY(Upper
Pin ASSY(Upper Turret)>
Turret)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵑ
ᵔᵖᵕᵒᵒᵒᵓᵋᵋᵟ
Ver.2.0 -276-
Unit No. 118
Turret(45ST-4AI)F-PV(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
9 74454002 Air Cylinder (Compact Type) 7831566 A CDQ2B80-30-DCK9747K SMC 1 with Index 10,11
Ver.2.0 -277-
Unit No. 119
119 Turret(45ST-4AI)F-PV(5)
Turret(45ST-4AI)F-PV(5) <Upper<Upper
Tool> Tool> From Serial No.22510001 and after
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
Ver.2.0 -278-
Unit No. 119
Turret(45ST-4AI)F-PV(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -279-
Unit No. 120
120 Turret(45ST-4AI)F-PV(6)<Lower
Turret(45ST-4AI)F-PV(6)-1/2 <Lower Base
Base Kit>
Kit> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵪᶍᶕᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵤᶐᵿᶋᶃ
ᵱᶃᶃᴾᵮᵿᶅᶃᴾᵐᵍᵐ
ᵔᵖᵗᵒᵎᵏᵖᵠ
Ver.2.0 -280-
Unit No. 120
Turret(45ST-4AI)F-PV(6)-2/2 <Lower Base Kit> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵠᵿᶑᶃᴾᵟᵱᵱᵷ
ᵔᵖᵗᵒᵎᵏᵖᵠ
Ver.2.0 -281-
Unit No. 120
Turret(45ST-4AI)F-PV(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -282-
Unit No. 121
121 Turret(45ST-4AI)F-PV(7)
Turret(45ST-4AI)F-PV(7) <Lower<Lower Base ASSY>
Base ASSY> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵆᵓᵖᵱᵲᵋᵐᵟᵧᴾᶇᶑᴾᶑᶆᶍᶕᶌᵌᵇ
ᵧᶌᶂᶃᶖᴾᵮᶇᶌᴾᵟᵱᵱᵷ
ᵔᵖᵗᵒᵎᵐᵑᵠ
Ver.2.0 -283-
Unit No. 121
Turret(45ST-4AI)F-PV(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -284-
Unit No. 122
122 Turret(45ST-4AI)F-PV(8)
Turret(45ST-4AI)F-PV(8) <Lower<Lower
Turret Turret
Disk> Disk> From Serial No.22510001 and after
ᵔᵖᵗᵐᵎᵔᵒ
Ver.2.0 -285-
Unit No. 122
Turret(45ST-4AI)F-PV(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -286-
Unit No. 123
123 Turret(45ST-4AI)F-PV(9)
Turret(45ST-4AI)F-PV(9) <Index<Index Pin ASSY(Lower
Pin ASSY(Lower Turret)>
Turret)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵑ
ᵔᵖᵕᵒᵒᵒᵓᵋᵋᵟ
Ver.2.0 -287-
Unit No. 123
Turret(45ST-4AI)F-PV(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
9 74454002 Air Cylinder (Compact Type) 7831566 A CDQ2B80-30-DCK9747K SMC 1 with Index 10,11
Ver.2.0 -288-
Unit No. 124
124 Turret(45ST-4AI)F-PV(10)
Turret(45ST-4AI)F-PV(10) <Lower<Lower Tool>
Tool> From Serial No.22510001 and after
ᵚᵒᵋᵏᵍᵐᵀᵜ ᵚᵑᵋᵏᵍᵐᵀᵜ
Ver.2.0 -289-
Unit No. 124
Turret(45ST-4AI)F-PV(10) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -290-
Unit No. 125
125 Turret(45ST-4AI)F-PV(11)<Die
Turret(45ST-4AI)F-PV(11)-1/2 <Die Holder>
Holder> From Serial No.22510001 and after
ᵚᵢᶇᶃᴾᵦᶍᶊᶂᶃᶐᴾᵟᶐᶐᵿᶌᶅᶃᶋᶃᶌᶒᴾᵢᶐᵿᶕᶇᶌᶅᵜ
ᵔᵖᵗᵑᵗᵕᵐ
Ver.2.0 -291-
Unit No. 125
Turret(45ST-4AI)F-PV(11)-2/2 <Die Holder> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵏ ᵧᶌᶂᶃᶖᴾᵏᵑᵋᵐᵐ ᵧᶌᶂᶃᶖᴾᵐᵒᵋᵑᵑ
ᵧᶌᶂᶃᶖᴾᵑᵓᵋᵒᵐ ᵧᶌᶂᶃᶖᴾᵒᵒᵋᵓᵏ ᵧᶌᶂᶃᶖᴾᵓᵑᵋᵔᵎ
Ver.2.0 -292-
Unit No. 125
Turret(45ST-4AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
1 74400060 1/2" Die Holder AJV ASSY 7831061 AMINEX 8 Index 2-11
Ver.2.0 -293-
Unit No. 125
Turret(45ST-4AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -294-
Unit No. 125
Turret(45ST-4AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -295-
Unit No. 125
Turret(45ST-4AI)F-PV(11) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -296-
Unit No. 126
126 Turret(45ST-4AI)F-PV(12)<1-1/4"AI
Turret(45ST-4AI)F-PV(12)-1/2 <1-1/4"AI Station(Upper)>
Station(Upper)> From Serial No.22510001 and after
ᵟ
ᵠ
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵒ ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵎᵐᵔᵋᵋᵟ
Ver.2.0 -297-
Unit No. 126
Turret(45ST-4AI)F-PV(12)-2/2 <1-1/4"AI Station(Upper)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵏᵋᵑᵑ
ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵳᶎᶎᶃᶐᵇ
ᵡ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵒᵎᵐᵔᵋᵋᵟ
Ver.2.0 -298-
Unit No. 126
Turret(45ST-4AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -299-
Unit No. 126
Turret(45ST-4AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -300-
Unit No. 126
Turret(45ST-4AI)F-PV(12) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -301-
Unit No. 127
127 Turret(45ST-4AI)F-PV(13)<1-1/4"AI
Turret(45ST-4AI)F-PV(13)-1/2 <1-1/4"AI Station(Lower)>
Station(Lower)> From Serial No.22510001 and after
ᵟ ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵓ
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵒᵒᵔᵟ
Ver.2.0 -302-
Unit No. 127
Turret(45ST-4AI)F-PV(13)-2/2 <1-1/4"AI Station(Lower)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵏᵕᵋᵑᵐ
ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵪᶍᶕᶃᶐᵇ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵒᵒᵒᵔᵟ
Ver.2.0 -303-
Unit No. 127
Turret(45ST-4AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -304-
Unit No. 127
Turret(45ST-4AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -305-
Unit No. 127
Turret(45ST-4AI)F-PV(13) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -306-
Unit No. 128
128 Turret(45ST-4AI)F-PV(14)<2"AI
Turret(45ST-4AI)F-PV(14)-1/2 <2"AI Station(Upper)>
Station(Upper)> From Serial No.22510001 and after
ᵟ
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵐ
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵎᵐᵖ
Ver.2.0 -307-
Unit No. 128
Turret(45ST-4AI)F-PV(14)-2/2 <2"AI Station(Upper)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵎᵋᵑᵐ
ᵡ ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵳᶎᶎᶃᶐᵇ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵒᵎᵐᵖ
Ver.2.0 -308-
Unit No. 128
Turret(45ST-4AI)F-PV(14) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -309-
Unit No. 128
Turret(45ST-4AI)F-PV(14) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -310-
Unit No. 128
Turret(45ST-4AI)F-PV(14) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -311-
Unit No. 129
129 Turret(45ST-4AI)F-PV(15)<2"AI
Turret(45ST-4AI)F-PV(15)-1/2 <2"AI Station(Lower)>
Station(Lower)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵏᵔ
ᵟ
ᵠ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵑᵗᵕᵕ
Ver.2.0 -312-
Unit No. 129
Turret(45ST-4AI)F-PV(15)-2/2 <2"AI Station(Lower)> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵏᵖᵋᵑᵑ
ᵡ
ᵲᶓᶐᶐᶃᶒᴾᵢᶐᶇᶔᶃᴾᵆᵪᶍᶕᶃᶐᵇ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵢᵣᵲᵟᵧᵪᴾᵡ
ᵔᵖᵗᵑᵗᵕᵕ
Ver.2.0 -313-
Unit No. 129
Turret(45ST-4AI)F-PV(15) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -314-
Unit No. 129
Turret(45ST-4AI)F-PV(15) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -315-
Unit No. 129
Turret(45ST-4AI)F-PV(15) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -316-
Unit No. 130
130 Turret(45ST-4AI)F-PV(16)
Turret(45ST-4AI)F-PV(16) <Support
<Support Plate>
Plate> From Serial No.22510001 and after
ᵪᶍᶕᶃᶐᴾᵲᶓᶐᶐᶃᶒᴾᵢᶇᶑᶉ
ᵔᵖᵗᵑᵏᵖᵗᵟ
Ver.2.0 -317-
Unit No. 130
Turret(45ST-4AI)F-PV(16) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -318-
Unit No. 131
131 Turret(45ST-4AI)F-PV(17)
Turret(45ST-4AI)F-PV(17) <Scrap<Scrap Guard>
Guard> From Serial No.22510001 and after
ᵔᵖᵗᵕᵓᵕᵎᵋᵋᵋ
Ver.2.0 -319-
Unit No. 131
Turret(45ST-4AI)F-PV(17) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -320-
Unit No. 132
132Drive(1)
AI AI Drive(1)
From Serial No.22510001 and after
ᵔᵖᵗᵒᵗᵔᵎᵋᵋᵟ
Ver.2.0 -321-
Unit No. 132
AI Drive(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -322-
Unit No. 133
133Drive(2)
AI AI Drive(2)
<Motor<Motor
BracketBracket
ASSY> ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵗᵔᵐᵋᵋᵟ
Ver.2.0 -323-
Unit No. 133
AI Drive(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -324-
Unit No. 134
134Drive(3)
AI AI Drive(3)
<Pulley<Pulley
Bracket Bracket
ASSY> ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵗᵔᵒᵋᵋᵟ
Ver.2.0 -325-
Unit No. 134
AI Drive(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -326-
Unit No. 135
135Drive(4)
AI AI Drive(4) <Idler U1
<Idler Bracket Bracket U1 ASSY>
ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵗᵔᵔᵋᵋᵟ
Ver.2.0 -327-
Unit No. 135
AI Drive(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -328-
Unit No. 136
136Drive(5)
AI AI Drive(5) <Idler U2
<Idler Bracket Bracket U2 ASSY>
ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵑᵑᵒᵔᵋᵋᵟ
Ver.2.0 -329-
Unit No. 136
AI Drive(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -330-
Unit No. 137
137Drive(6)
AI AI Drive(6) <Idler L1
<Idler Bracket Bracket L1 ASSY>
ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵔᵖᵗᵒᵗᵔᵖᵋᵋᵟ
Ver.2.0 -331-
Unit No. 137
AI Drive(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -332-
Unit No. 138
138Drive(7)
AI AI Drive(7) <Idler L2
<Idler Bracket Bracket L2 ASSY>
ASSY> From Serial No.22510001 and after
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵔᵖᵗᵑᵑᵒᵖᵋᵋᵟ
Ver.2.0 -333-
Unit No. 138
AI Drive(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -334-
Unit No. 139
139 Middle
Middle Drive(Upper)
Drive(Upper) From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵔ
ᵿ
ᵿ
ᵔᵖᵗᵕᵐᵒᵔᵋᵋᵋ
Ver.2.0 -335-
Unit No. 139
Middle Drive(Upper) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -336-
Unit No. 139
Middle Drive(Upper) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -337-
Unit No. 139
Middle Drive(Upper) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -338-
Unit No. 140
140 Middle
Middle Drive(Lower)
Drive(Lower) From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵔ
ᵿ
ᵿ
ᵔᵖᵗᵕᵐᵒᵕᵋᵋᵋ
Ver.2.0 -339-
Unit No. 140
Middle Drive(Lower) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -340-
Unit No. 140
Middle Drive(Lower) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -341-
Unit No. 140
Middle Drive(Lower) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -342-
Unit No. 141
141 Turret
Turret Drive(Upper)(1)
Drive(Upper)(1) <1-1/4"AI>
<1-1/4"AI> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵑ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵒᵑᵔᵟ
Ver.2.0 -343-
Unit No. 141
Turret Drive(Upper)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -344-
Unit No. 141
Turret Drive(Upper)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -345-
Unit No. 141
Turret Drive(Upper)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -346-
Unit No. 142
142 Turret
Turret Drive(Upper)(2)
Drive(Upper)(2) <2"AI> <2"AI> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵑ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ
ᵔᵖᵗᵒᵒᵑᵕᵟ
Ver.2.0 -347-
Unit No. 142
Turret Drive(Upper)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -348-
Unit No. 142
Turret Drive(Upper)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -349-
Unit No. 142
Turret Drive(Upper)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -350-
Unit No. 143
143 Turret
Turret Drive(Lower)(1)
Drive(Lower)(1) <1-1/4"AI>
<1-1/4"AI> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵑ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵔᵖᵗᵒᵒᵑᵖᵟ
Ver.2.0 -351-
Unit No. 143
Turret Drive(Lower)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -352-
Unit No. 143
Turret Drive(Lower)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -353-
Unit No. 143
Turret Drive(Lower)(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -354-
Unit No. 144
144 Turret
Turret Drive(Lower)(2)
Drive(Lower)(2) <2"AI> <2"AI> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒᵑ
ᵟ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵔᵖᵗᵒᵒᵑᵗᵟ
Ver.2.0 -355-
Unit No. 144
Turret Drive(Lower)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -356-
Unit No. 144
Turret Drive(Lower)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -357-
Unit No. 144
Turret Drive(Lower)(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -358-
Unit No. 145
145 Power
Power Vacuum
Vacuum <PV<PV Piping>
Piping> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵓ
ᵔᵖᵗᵕᵐᵎᵔᵋᵋᵋ
ᵆᵔᵖᵗᵐᵓᵖᵎᵟᵇ
Ver.2.0 -359-
Unit No. 145
Power Vacuum From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -360-
Unit No. 146
146Blow
Air Air Unit-1/2
Blow Unit From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵐᵑ ᵧᶌᶂᶃᶖᴾᵏᵕᵋᵐᵏ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵕᵖᵑᵏᵔᵕᵎ
Ver.2.0 -361-
Unit No. 146
Air Blow Unit-2/2 From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵔᵋᵒᵓ
ᵢᵣᵲᵟᵧᵪᴾᵠ
ᵕᵖᵑᵏᵔᵕᵎ
Ver.2.0 -362-
Unit No. 146
Air Blow Unit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
16 74613279 Air Control Unit S420264--- AC21B-01CG-T-2R-X2122 (783167003) SMC 1 Index 17-21
Ver.2.0 -363-
Unit No. 146
Air Blow Unit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -364-
Unit No. 146
Air Blow Unit From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -365-
Unit No. 147
147 Repositioning(1)
Repositioning(1) From Serial No.22510001 and after
ᵔᵖᵗᵒᵎᵓᵒ
Ver.2.0 -366-
Unit No. 147
Repositioning(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
3 74419247 Air Cylinder for Repositioning 7831582 CA2G80-60-DCI0896I SMC 1 with Index 4-6
9 74419247 Air Cylinder for Repositioning 7831582 CA2G80-60-DCI0896I SMC 1 with Index 10-12
Ver.2.0 -367-
Unit No. 148
148 Repositioning(2)
Repositioning(2) <Cable>
<Cable> From Serial No.22510001 and after
ᵨᶓᶌᶁᶒᶇᶍᶌᴾᵠᶍᶖᴾᵱ ᵵᶍᶐᶉᶆᶍᶊᶂᶃᶐ
ᵆᵱᵮᵑᵇ
ᵱᵋᵏᵒ ᵱᵋᵏᵒ
ᵔᵖᵗᵕᵔᵖᵖᵋᵋᵋ
Ver.2.0 -368-
Unit No. 148
Repositioning(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -369-
Unit No. 149
149 Lower
Lower Cylinder
Cylinder Rise-type
Rise-type From Serial No.22510001 and after
ᵔᵖᵗᵐᵐᵖᵎ
Ver.2.0 -370-
Unit No. 149
Lower Cylinder Rise-type From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -371-
Unit No. 149
Lower Cylinder Rise-type From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -372-
Unit No. 150
150 Pneumatic(1) <Workholder
Pneumatic(1)-1/2 <WorkholderBase
BaseUp>
Up> From Serial No.22510001 and after
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵱᵣᵡᵲᵧᵭᵬᴾᵡᵋᵡ
ᵱᵣᵡᵲᵧᵭᵬᴾᵠᵋᵠ
ᵠ ᵠ
ᵡ ᵡ
ᵔᵖᵗᵕᵔᵖᵗᵋᵋᵋ
ᵔᵖᵗᵕᵒᵗᵎᵋᵋᵋ
Ver.2.0 -373-
Unit No. 150
Pneumatic(1)-2/2 <Workholder Base Up> From Serial No.22510001 and after
ᵔᵖᵗᵕᵔᵖᵗᵋᵋᵋ
ᵔᵖᵗᵐᵐᵐᵏ
Ver.2.0 -374-
Unit No. 150
Pneumatic(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -375-
Unit No. 151
151 Pneumatic(2)
Pneumatic(2) <8-station
<8-station Centralized
Centralized SOL> SOL> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵋᵏᵑ
ᵖᵋᶑᶒᵿᶒᶇᶍᶌᴾᵡᶃᶌᶒᶐᵿᶊᶇᶘᶃᶂᴾᵱᵭᵪ
ᵔᵖᵗᵐᵐᵐᵑᵋᵋᵋ
Ver.2.0 -376-
Unit No. 151
Pneumatic(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
10 74451528 One Touch Fitting P586563123 KQ2L08-01S (Reducer Elbow) SMC 4 P Port
Ver.2.0 -377-
Unit No. 152
152 Punch
Punch Assembly
Assembly Jig Jig
From Serial No.22510001 and after
ᵎᵖᵏᵗᵑᵏᵎᵠ
Ver.2.0 -378-
Unit No. 152
Punch Assembly Jig From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -379-
Unit No. 152
Punch Assembly Jig From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
25 74165506 Belt Wrench P350333001 BW-2 Super Tool 1 List Only (Accessory)
Ver.2.0 -380-
Unit No. 153
153 Alignment
Alignment Jig <1/2">
Jig S(1) S(1) <1/2"> From Serial No.22510001 and after
ᵔᵖᵏᵒᵒᵕᵓ
Ver.2.0 -381-
Unit No. 153
Alignment Jig S(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -382-
Unit No. 154
154 Alignment
Alignment Jig <1-1/4">
Jig S(2) S(2) <1-1/4"> From Serial No.22510001 and after
ᵔᵖᵏᵒᵒᵕᵔ
Ver.2.0 -383-
Unit No. 154
Alignment Jig S(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -384-
Unit No. 155
155 Alignment
Alignment Jig <2">
Jig L(1) L(1) <2"> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵊᵑ
ᵔᵖᵏᵐᵔᵕᵓ
Ver.2.0 -385-
Unit No. 155
Alignment Jig L(1) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -386-
Unit No. 156
156 Alignment
Alignment Jig <3-1/2">
Jig L(2) L(2) <3-1/2"> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵊᵑ
ᵔᵖᵏᵐᵔᵕᵗ
Ver.2.0 -387-
Unit No. 156
Alignment Jig L(2) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -388-
Unit No. 157
157 Alignment
Alignment Jig <4-1/2">
Jig L(3) L(3) <4-1/2"> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵊᵑ
ᵔᵖᵏᵐᵔᵖᵑ
Ver.2.0 -389-
Unit No. 157
Alignment Jig L(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -390-
Unit No. 158
158 Alignment
Alignment Jig <Positioning
Jig L(4) L(4) <Positioning Pin ASSY>
Pin ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵒ
ᵔᵓᵎᵐᵏᵔᵕ
Ver.2.0 -391-
Unit No. 158
Alignment Jig L(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -392-
Unit No. 159
159 1-1/4"AI
1-1/4"AI Alignment
Alignment Jig Jig From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵕ
ᵔᵎᵒᵖᵓᵑᵑ
Ver.2.0 -393-
Unit No. 159
1-1/4"AI Alignment Jig From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -394-
Unit No. 160
160 2"AI
2"AI Alignment
Alignment Jig Jig From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵐᵋᵕ
ᵎᵖᵏᵕᵎᵗᵎᴾᴾᵟ
Ver.2.0 -395-
Unit No. 160
2"AI Alignment Jig From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -396-
Unit No. 161
161 Code
Bar Bar Code Reader
Reader From Serial No.22510001 and after
ᵔᵕᵎᵗᵐᵕᵎᵢ
ᵔᵕᵗᵎᵏᵒᵐ
Ver.2.0 -397-
Unit No. 161
Bar Code Reader From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -398-
Unit No. 162
162 Pneumatic(3) <Pneumatic
Pneumatic(3)-1/6 <PneumaticPiping>
Piping> From Serial No.22510001 and after
ᵠ
ᵣ ᵣ ᵤ
ᵤ
ᵢ ᵢ
ᵡ
ᵮᶌᶃᶓᶋᵿᶒᶇᶁᴾᵮᶇᶎᶇᶌᶅ ᴾᵔᵖᵗᵕᵕᵑᵎᵋᵋᵋ
ᵆᵔᵖᵗᵐᵐᵐᵎᵋᵋᵠᵇ
Ver.2.0 -399-
Unit No. 162
Pneumatic(3)-2/6 <Pneumatic Piping> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵏᵋᵑᵖ
ᵧᶌᶂᶃᶖᴾᵔᵋᵐᵗ
ᵧᶌᶂᶃᶖᴾᵑᵋᵑᵗ
ᵢᵣᵲᵟᵧᵪᴾᵟ ᵕᵖᵑᵏᵕᵎᵖᵋᵋᵋ
Ver.2.0 -400-
Unit No. 162
Pneumatic(3)-3/6 <Pneumatic Piping> From Serial No.22510001 and after
ᵥ
ᵴᵧᵣᵵᴾᵠ ᵴᵧᵣᵵᴾᵡ
ᴾᵔᵖᵗᵕᵕᵑᵎᵋᵋᵋ
ᵆᵔᵖᵗᵐᵐᵐᵎᵋᵋᵠᵇ
Ver.2.0 -401-
Unit No. 162
Pneumatic(3)-4/6 <Pneumatic Piping> From Serial No.22510001 and after
ᵱᵣᵡᵲᵧᵭᵬᴾᵢᵋᵢ
ᵱᵣᵡᵲᵧᵭᵬᴾᵣᵋᵣ ᵱᵣᵡᵲᵧᵭᵬᴾᵤᵋᵤ
ᴾᵔᵖᵗᵕᵕᵑᵎᵋᵋᵋ
ᵆᵔᵖᵗᵐᵐᵐᵎᵋᵋᵠᵇ
Ver.2.0 -402-
Unit No. 162
Pneumatic(3)-5/6 <Pneumatic Piping> From Serial No.22510001 and after
ᵧ
ᵦ
ᵦ
ᵴᵧᵣᵵᴾᵥ
ᴾᵔᵖᵗᵕᵕᵑᵎᵋᵋᵋ
ᵆᵔᵖᵗᵐᵐᵐᵎᵋᵋᵠᵇ
Ver.2.0 -403-
Unit No. 162
Pneumatic(3)-6/6 <Pneumatic Piping> From Serial No.22510001 and after
ᵱᵣᵡᵲᵧᵭᵬᴾᵦᵋᵦ ᵴᵧᵣᵵᴾᵧ
ᴾᵔᵖᵗᵕᵕᵑᵎᵋᵋᵋ
ᵆᵔᵖᵗᵐᵐᵐᵎᵋᵋᵠᵇ
Ver.2.0 -404-
Unit No. 162
Pneumatic(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -405-
Unit No. 162
Pneumatic(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -406-
Unit No. 162
Pneumatic(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -407-
Unit No. 162
Pneumatic(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -408-
Unit No. 162
Pneumatic(3) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -409-
Unit No. 163
163 Pneumatic(4)
Pneumatic(4) <Piping
<Piping Duct YDuct Y ASSY>
ASSY> From Serial No.22510001 and after
ᵚᴾᵪᶇᶑᶒᴾᵭᶌᶊᶗᴾᵜ
ᵔᵖᵗᵐᵐᵓᵓᵋᵋᵟ
Ver.2.0 -410-
Unit No. 163
Pneumatic(4) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -411-
Unit No. 164
164 Pneumatic(5)
Pneumatic(5) <Workclamp
<Workclamp SOL SOL Kit>
Kit> From Serial No.22510001 and after
ᵵᶍᶐᶉᶁᶊᵿᶋᶎᴾᵱᵭᵪᴾᵩᶇᶒ
ᵔᵖᵗᵕᵕᵖᵏᵋᵋᵋ
Ver.2.0 -412-
Unit No. 164
Pneumatic(5) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -413-
Unit No. 165
165 Pneumatic(6)
Pneumatic(6) <Workclamp
<Workclamp Solenoid
Solenoid ASSY>
ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵋᵏᵐ
ᵵᶍᶐᶉᶁᶊᵿᶋᶎᴾᵱᶍᶊᶃᶌᶍᶇᶂᴾᵟᵱᵱᵷ
ᵔᵖᵗᵕᵐᵔᵏᵋᵋᵋ
Ver.2.0 -414-
Unit No. 165
Pneumatic(6) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -415-
Unit No. 166
166 Pneumatic(7)
Pneumatic(7) <X-gauge
<X-gauge BlockBlock SOL ASSY>
SOL ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵋᵕ
ᵶᵋᶅᵿᶓᶅᶃᴾᵠᶊᶍᶁᶉᴾᵱᵭᵪᴾᵟᵱᵱᵷ
ᵔᵖᵗᵕᵒᵗᵑᵋᵋᵟ
Ver.2.0 -416-
Unit No. 166
Pneumatic(7) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
Ver.2.0 -417-
Unit No. 167
167 Pneumatic(8)
Pneumatic(8) <L Workclamp
<L Workclamp SOL Kit>
SOL Kit> From Serial No.22510001 and after
ᵪᴾᵵᶍᶐᶉᶁᶊᵿᶋᶎᴾᵱᵭᵪᴾᵩᶇᶒ
ᵔᵖᵗᵕᵕᵖᵏᵋᵋᵋ
Ver.2.0 -418-
Unit No. 167
Pneumatic(8) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
8 74379550 One Touch Fitting P586564016 EUL10 NITTA MOORE 1 List Only
Ver.2.0 -419-
Unit No. 168
168 Pneumatic(9)
Pneumatic(9) <L Workclamp
<L Workclamp Solenoid
Solenoid ASSY>
ASSY> From Serial No.22510001 and after
ᵧᶌᶂᶃᶖᴾᵑᵋᵏᵐ
ᵪᴾᵵᶍᶐᶉᶁᶊᵿᶋᶎᴾᵱᶍᶊᶃᶌᶍᶇᶂᴾᵟᵱᵱᵷ
ᵔᵖᵗᵕᵐᵕᵖᵋᵋᵋ
Ver.2.0 -420-
Unit No. 168
Pneumatic(9) From Serial No.22510001 and after
Index Code Parts Name Drawing No. Type Maker Q’ty Note
5 74451498 Hex Soc Half Union P586533171 KQ2S08-03S SMC 2 R1,R2 Port
Ver.2.0 -421-