Professional Documents
Culture Documents
Vendor Name Material Spec-2: Please Kindly follow Material Requirements in the drawing
• GST / Taxes Applicable Should be extra at actual at the time of invoicing HEIGHT 7.50 MM
• It is presumed that seller will furnish duplicate copy of GST invoice for Remarks MFC Submission Date :- 20-04-2023.
• Lily Bharath reserves the right to reject any offer without any intimation.
1. Basic Rate : ₹ 0.00 $
• Please Share the Quotation on letterhead as an Annexure to this documents.
2. CGST %: 0.00 ₹ 0.00 $
• Please submit your "Budgetary Cost" for project bidding, this will negotiate
further. All contingency should be included in the quotation. 3. IGST %: 0.00 ₹ 0.00 $
<---(Please Add Your signature & stamp or Class 3 digital signature Here)
Remarks:
SIGNATURE BY VENDOR
SPRING NUT
ST-threads
Spring steel
Surface coating Y 530
1 REQUIREMENTS
1.1 Material
Spring steel 1770-04 STD 1117,7.
1.3 Others
Testing STD 7141,48.
Free from burrs, sharp edges and other defects which may lessen the usability.
Symbols, designations and general drawing methods VCS 5023,509.
Document Type
EDM-W 2004-10-12
MULTI-PART DRAWING
FMC Part No
Volvo Car Corporation Document No Revision Volume No Page No (In this doc.)
1.4 Dimensions
Document Name
SPRING NUT
Document Type
MULTI-PART DRAWING
Volvo Car Corporation Document No Revision Volume No Page No (In this doc.)