Certificate Number Issued 1* July 2003
Baseefa03¥0209 Baseefa Page 1 of 3
1 TYPE EXAMINATION CERTIFICATE
2 tntrinsically Safe System Intended for use in Potentially Explosive Atmospheres
3 Type Examination Certificate Baseefa03¥0209
Nunnber
4 System PROXIMITY SENSOR SYSTEM.
S$ Cortifiente Holder METRIX INSTRUMENT CO.
6 Address 171 Townhurst Drive, Houston, Texas 77043, USA,
7 This system and any acceptable variation thereto is specified in the schedule 10 this certificate snd the dacaments
therein referted 19
8 Baseefa (200) Ltd. cenifies that this systent has been found to comply with the following standards
EN 50 039:1980,
9 The examination anc test results are recorded in confidential Report No. 02(C)083§
10 IP the sige "X" is placed after the certificate mumber, t indicates that the systems is subject ro special conditions of
safe use specitied in the schedule to this eentficate
11 This TYPE EXAMINATION CERTIFICATE relates only ¢o the design of the specified imrinsically safe system
‘and not fo specific items of equipment therein. It is the responsibility of the system certificate folder tg supply the
relevant documentation to the installer of the intrinsically safe electrical system referred to inthis certificate,
‘The installer has the responsibility te ensure that tie system conforms to the specification laid down in the Schedule
to this certificate and has salisfied rootine verifications and tests specified therein.
12 ‘The marking of the systent shall include the following,
SYST Baseefan3¥0209%
‘This certificate may only be reproduced in its entirety, without any change, schedule included.
Baseefa (2001) Ld, Customer Reference No. 0708 Project File No. 03/0325
may be used an paticul
This cerfietc i granted suljce fo the general ferme an condlivons of !
Brescls (20001) Lid do ssanly andicate thot the systent pot
ye
Baseefa (2001) Ltd, RS SINCLAIR
Health and Safely Laboratory Site, Harpur Hil, FA
Buxton, Derbyshire SK17 BUN DIRECTOR
Telephone +44 (0) 1298 28255 Fax +44 (0) 1298 28216 On behalf of
e-mail infoDbaseeta200! a wen site wor paseeta2001 biz Raseefa (2001) 14d.
Roaisievnd in Enwane No 4308578 wt 13 Dovectair Censcee. Buxton,
Detbyshie, SK17 SRCertificate Number Issued 1" July 2003
Baseota03voz08 ELTA) Page 2of3
Schedule
15 System Description
A Proximity Sensor System is designed to detect ratial vibration or state position of rotating machinery
The System comprises a Series 19,000 Probe, an optional Fxteusion Cable Type 7402 (a total maximum, including the
integral cable of the cable, of 9m) and a Proximity Probe Driver Model $835. located in the Hazardous Area, and an
Inteinsically Safe source iocated in the Non-ilazardous Arca. The Probe Driver circuit is designed to provide a high
Frequeney excitation to the probe
Uh proximity of a metal target causes loading of the probe coil which is denodslated in the Probe Driver to provide a
voltage signal proportinal tothe distance between the probe and target.
A Proximity Sensor System comprises:
1 Apparatus thal may beinstalled in a Nom Hazardous Aven (Sale Avea )
11 Fither
A 26V 30 and a 20V 3900 Dual Channel Shunt Zener Diode Safety Barrier having the following oF lower ouput
parameters
v, > 26v
4 sma
Po ogi
oR
A 28V 3000 and a 28V Diode Return Dual Channel Shunt Zener Diode Safety Barrier having the Following or lower
‘output parameters
u, = ev
t mA
P= 9.46W
oR
A 24V Powered Galvanic Isslator having the Following ar tower output parameters
u 28v
= 93mA
v, now
The power souiees must be certified by an EEC Approved Certification Body to [FEx ia IIC and the output current
‘mst be fimited by a resistor "R’ such that I= U,/ R
12. The above apparatus is to be supplied from apparatus situaced in the safe area whic is unspecified except that it mast
‘not be supplied from nor contain in normal or abnormal conditions a source af potential with respect to earth in excess
of 250 volts rm s. of 250 volts deCertificate Number Issued 1" July 2003
Baseefa03¥0209 EET Tc) Page 3 ots
2 Apparatus that may be installed io a Hazardou
21 Proximity Probe Driver Model $533 (Rassefa3 ATEX0208X)
22 Series 10,000 Probe (Baseolsi3A TEXO204)
3. Permissible Interconnesting Cables
3.1 The capacitance and either the inductance or the inductance 19 re
not exceed the following values -
Sg ee
Hh.
ors}
ho
|
3.2 Wiring to terminals of the safe atea apparatus may be achieved by separate cables or by separate cireuits within a
Type A or Type B multicore cable (as defined in clause 5.3 of NSO 039) subject to the follwing
a The cireuil to be individually screened when used within a Type A multicore cable
b The peak voltage of any other cireuit within a Type B multicore eable must net exceed 60V
46 Report
onecyosas,
17 Special Conditions for Safe tise
None
18 Drawings and Documents
Number Issue Date Deseription
R30 B 05-22-03 System
R46-012 A 05-22-03 System labetCertificate Number issued 1° July 2003
Baseofa03ATEXO205X Baseefa Page 1 of 2
2 System Intended for use in Potentially Explosive Atmospheres
Directive 94/9/EC
3° BC-Type Examination Baseeta3ATEXO20SX
Cenificate Number
4 Equipment or Protective System. PROXIMITY PROBE DRIVER MODEL 8533
5 Manufacturer METRIX INSTRUMENT CO.
6 Nidress 1771 Townhurst Drive, Houston, Texas 77043, USA,
7 This equipment oF protective system and any acceptable variation thereto is specified in the schedule to this
cemtiticate und the documents therein relerred to,
8B Raseefa (2001) Lid. Netitied body number 1180, in accordance with Article ¥ of the Council Directive S/YEC of
23 March 1994, cestfies that this equipment or protective system has been found to comply with the Essestial
Health and Safety Requirements relating to the design and consieuction of equipment and protective systems
intended for use in potentially explosive aimospheres given in Annex Il to the Directive
The examination and test resus ate recurded in confential Report No. O2(C)OS3S
9 Compliance with the Fsseniak Health and Safety Requiteitents has heen assuted by compliance with
EN S0014:1997 + Amendments 1&2 KN 50020:2002 EN 50284:1999
except i respect of those requirements listed a item 18 ofthe Schedule
10 EC the sign “X® is placed after the certificate mumber, it indicates that the equipment or protective system is subject
te special conditions for safe use specified in the schedule to tis vertficate,
11 This EC - TYPE EXAMINATION CERTIFICATE telates only to the design and construction of the specified
equipment or protective system Further reysiremerts of the Dicective apply to the manufacturing process and
supply of this equipment or protective system These are not covered by this certificate
Qh
@uc e&
This certificate may only be reproduced in its entirety, without any change, schedule included.
marking of the equipment or protective system shall include the following
ia HE 73 (51°C Tas +100°C)
Basceta (2001) Lid Customer Reference No. 0708 Project File No. 02/0836
| This conitionte is granted subject the general terms and condi . J.
Baseeta (2001) Lid. M dacs ot sevessarily indicate Ua the equip
may’ be sed in particular industries or etseumst
Baseefa (2001) Ltd. RS SINCLAIR
Heath and Safely Laboratory Site, Harpur Hil, n
Buxion, Derbyshire SK17 9JN, DIRECTOR
Telephone +44 (0) 1298 28255 Fax +44 (0) 1208 28216 On behalf of
‘e-mail info@baseetaz001.biz web site ww basee'a2001 biz Baseefa (2001) Ltd.
Registered m Englane Ne. 4305678 at 13 Dovedale Crescent
Derbyshen, SK17 9B)Certificate Number Issued 1" July 2003
Baseefa03ATEX0205X Baseefa Page 2 of 2
3 Schedule
4 Certificate Number Bascefa03ATEXO204%
1s or Protective System
The Proximity Probe Driver Model 5833 coasisis af an encapsulated printed circuit board mounted inside & plastic
enclosure (which may Ive a 1Smam DIN sail mount adaptor as option) Connections to the Non-Havardous Area are made
vie tree screw terminals and to the Proximity Probe through a coaxial connector, all situated on top of the enclosure, A
BNC socket is also provided on the tap of the enclosure 10 allow Bld testing,
Input Load Parameters
~ Qol2pF
20011
Verminals Probe and Test
u, = 28
188mA
P= ogIW
16 Report Ni
O7C)0535
7
1 he apparatus raust be installed such that the terminals are protected to at least 1P20.
2 ‘he plastic enclosure may create an electrostatic hazard and should not be rubbed or cleaned with a dry cloth
3. The apparatus must not be installed in an area of high dust-laden airflow.
18 Essential Health and Safety Requirements
All relevant Essential Health and Safety Requirements are covered by the standards listed at items 9
19 Drawings and Documents
‘Number Sheet — Issue Date Descrigtion
S533-XNX 182 F 05-22-03 Probe Driver $523, Assembly
5533-103, 1 A 5-22-99 Probe Driver $533 DIN Rail Mount Parts List
BSGT-XXX, lofs 09-27-01 Label, Prohe Driver $533
8567-002 30s E 08-27-01 Label, Probe Driver 5533,
8568 ' c 8.9.02 Probe Driver $533 Cirevit Schematic
8569 16 16-15-96 Drilling Detail, Probe Driver $533
8870 1 F 89-02 Probe Driver $533 Assembly
8S20-XXX. 1e2 1031-01 Probe Driver 9533 Parts ListContificate Number Issued 1" July 2003
Baseofa03ATEX0204 Baseefa Page 1 of 2
AC - TYPE EXAMINATION CERTIFECATE,
Intended for use in Potentially Explosive Atmospheres
Directive 94/9/RC
2 Equipment or Protective Syste
3 BC Type Examination Baseefa03ATEXO204
Cenificate Number
4 Equipment or Protective System SERIES 10,000 PROBE,
5 Manofacturer METRIX INSTRUMENT CO,
6 Address 1711 Townhurst Drive, Houston, ‘Texas 77043, USA,
7 This equipment or protective system and any accepiatle variation thereto is specified in the schedule te this
certificate and the documents therein referred to,
8 Rascefe (200) Lid. Notified body number 1186, in acvordance with Acticle 9 of the Council Directive 94/9/EC of
23 March 1994, certifies that this equipment oF protective system has been found to comply with the Essential
Health and Safety Requirements celating. to the design and construction of equipmem and protective systems
‘intended for use in potentially explosive atinospheres given i Annex It co the Directive
‘The examination and (est results are recorded in confidentiat Report No, 02(C)US35
9 Compl
EN S0014:1997 + Amen
¢ with the Essential Liealth and Safety Requirements has been assured by compliance with:
ts 1&2 FNS0020:2002 EN 50284:
od al itera 18 of the Schedole
999
i
except in respect of those requirements
tO UF the sign “X" is placed afler the certificate number, it indicates that the equipment or protective system i
to special conditions for safe use specified m the schedule to this certificate
subject
TL This FC - TYPE EXAMINATION CERTIFICATE relates only to the design and construction of the specified
equipment or protective system —Furher requirements of the Directive apply to the manufacturing process and
supply of this equipment or protective system These are not covered by this certificate
12 ‘The marking of Ue equipment or protective system shal include the flossing
@ WIG kei MC TS .3eCS tH SHITE)
‘This certificate may only he reproduced in its entirey, without any change, schedule i
Raseefa (2001) 11d Customer Reference No, 0708 Project File No, 02/0535,
This cect paved sb to the grea rms and conor of As
Bassa (2001) 3 Tes nt recs ete Ul he ee ype
ay be set in pricla at oreo. |
Baseefa (2001) Ltd. RS SINCLAIR
Health and Safety Laboratory Site, Harpur Hil, x
Buxton, Derbyshire SK17 GIN DIRECTOR
Telephone +44 (0) 1296 26255 Fax +44 (0) 1298 28216 (On behalf of
‘web site wivw baseeta2c0t biz Bascefa (2001) Ld,
Rewisioied MEnglaui No. 4306878 at 12 Covedale Crescent, Buxton,
Derbystite, SK1? 9B)Certificate Number
Issued 1* July 2003
Baseefa03ATEX0204 Page 2 of 2
13 Schedule
“4 Certificate Number Bascefa03ATEX0204
15 ion of Equipment or Protective System
The Series 10,000 Probe consists of a coil wound on to a plastic mandhill and inserted into one end of an externally
threaded, stainiess stcet cylindrical body. The coil varies in diameter froma Smm to 0mm depending on the version and
in inductance oF 20018
any verston has a maxi
‘An integeal coaxial cable is connected to the coil, through the opposite end of the cylindrical body, and is terminated with a
coaxial connector fot mating with the Probe Driver
An extension cable ‘Type 7402 nay be fited between the Probe and the Probe Driver (Baseefa03ATEXO205X) he
‘maxionum length of the integral cable ard extension cable is 9m and the cables may be provided with armoured protection
Inpul parameters
Uo - 28y
t= 18m
L, 200,
G ant
16 Report Number
0(C)0535
17 Special Conditions for Safe Use
None
18 Rssenti
Health and Safety Requirements
Ail relevant Essential Health and Safety Requirements are covered by the standards listed at item: &
19 Drawings and Documents
Number Sheet Issue
7402 ' K
T402-LG-04 1 A
7402-XXX L E
8141-003 1 B
10,900 1103 Original
10001-A-B-.6-002 Hl t
Date
05-22-43
04.19.94
06-20-88
08-22-03
08.22.03
01-23-86,
Description
Assembly, Extension Cable 7402
Extension Cable 7402 Pats List
Extension Cable 7402 Sub-Assembly Parts
Label for Probe Cable
Assembly, Proximity Probes
Probe Assembly Parts List. Non-ArmouredCertificate Number Issued 25" May 2004
Baseefa03¥0209/1 EET) Page 1 of 2
1 SUPPLEMENTARY TYPE EXAMINATION CERTIFICATE
2 Intrinsically safe System Intended for use in Potentially Explosive Atmospheres
3 Supplementary Type Exami Baseefa03¥0200/1
Certificate Number:
4 Equipment PROXIMITY SENSOR SYSTEM
S— Manufacturer: METRIX INSTRUMENT CO.
6 Address: 1711 Townhurst Drive, Houston, Texas 77043, USA
7 This supplementary certificate extends Type Examination Certificate No. Baseefa03¥0209 to apply only to the
‘design of the specified intrinsically safe system, and not to specific items of equipment therein, in accordance with
the specification set out in the Schedule of the said certificate but having any variations specified in the Schedule
attached to this certificate and the documents therein referred to,
‘This supplementary certificate shall be held with the original certificate.
‘This certificate may only be reproduced in its entirety, without any change, schedule included.
Baseefa (2001) Lid, Customer Reference No, 0708.
“This certificate is granted subject to the general terms and conditions of
Baseefa (2001) Lu, It does not necessarily indicate that the equipment
may be used in particular industries or circumstances.
Baseefa (2001) Ltd.
Health and Safety Laboratory Site, Harpur Hill,
Buxton, Derbyshire SK17 SIN
Telephone +44 (0) 1298 28255 Fax +44 (0) 1298 26216
e-mail infog@basecta2001 biz web site www baseeta?001 biz
Registered in England No. 4308878 at 13 Dovedale Crescent, Suxon,
Derbyshire, SK17 9B
Project File No, 04/0303
RSSINCLAIR
DIRECTOR
On behalf of
Baseefa (2001) Led.Certificate Number Issued 25" May 2004
Baseefa03¥0209/1 EET E) Page 2 of 2
13 Schedule
“ Certificate Number Baseefa03ATEX0209/1
1S Description of the variation to the Equipment
2.2 of the original schedule to be replaced by a Bently Nevada Eddy Current
Probe (BAS99ATEX1099), The alternative probe has no affect on the intrinsic safety assessment
16 Report Number
None.
17 Special Conditions for Safe Use
None
18 Essential Health and Safety Requirements
‘Compliance with the Essential Health and Safety Requirements is not affected by this variation.
19 Drawings and Documents
Number Sheet Issue Date Description
8830 loft 03-29-04 Installation, (CENELEC) 5533 Probe DriverCertificate Number ied 25" May 2004
Baseefa03ATEX0205X/1 Baseefa Page 1 of 2
1 SUPPLEMENTARY EC - TYPE EXAMINATION CERTIFICATE
2 Equipment or Protective System Intended for use in Potentially Explosive Atmospheres
Directive 94/9/EC
3 Supplementary EC - Type Baseefa03ATEX0208X/1
Examination Certificate Number:
4 Equipment or Proteive System PROXIMITY PROBE DRIVER MODEL 5533
5 Manutacter: METRIX INSTRUMENT CO.
6 Adiess: 1771 Towahurst Driv, Houston, Texas 77043, USA
7 This supplememary catifcate extends EC - Type Fxaminaton Cerificate No, Basesfi03ATEXG208 0 apply 10
quipmen or petecive systems designed and cnrctd in accordance withthe specification st oat athe
‘Schedule of the said certificate but having any variations specified in the Schedule attached to this certificate and
the document therein refered,
‘This supplementary ceifcat hl eld with he orignal cerifcate
‘This ceriiate may only be reproduced in is ety, without any change, schedule included
Baseefa (2001) Lud. Customer Reference No, 0708 Projet ile No o4tsas
Zaft 6
“This creates granted sujet tote general sms ad condos of VOC x
Basch a a hanestr ncseay ee tt Ue upd yu
ma) bal in arc oceans -
Baseefa (2001) Ltd. RS SINCLAIR
Heath ana SteyCabersory St, Harpur Hi,
Bunton: Dortyoe 17 UN DIRECTOR
Telephone +44 (0) 1298 28255 Fax +44 (0) 1298 26216 On of
fo@baseefa2001 biz web site www baseefa2001 biz Baseefa (2001) Ltd.
3 in England No, 4305578 at 13 Dovedel
Derbyshire, SK17 SB
cent, Burton,Certificate Number SERIE) Issued 25" May 2004
Baseefa03ATEX0205X/1 Page 2 of 2
B Schedule
u“ Certificate Number Baseefa03ATEX0205X/1
15 Description of the variation to the Equipment or Protective System
Variation 1.1
To permit 2 minor component change to the PCB assembly that does not affect the original assessment,
16 Report Number
None.
17 Special Conditions for Safe Use
‘None additional to those listed previously
18 Essential Health and Safety Requirements
‘Compliance with the Essential Health and Safety Requirements is not affected by this variation.
19 Drawings and Documents
Number Sheet Issue Date Description
8568 loft D 11-03-03 Schematic, $533 Probe Driver
8570 loft F 11-03-03 Assembly, 5533 Probe Driver
8569 106 E 11-03-03 Drilling Detail, $533 Probe Driver (PCB Artwork)
8570-XXX 12D 11-03-03 Sub-Assy, PCB, Probe Driver (Parts List)