3-6 Alternators & Regulators
BOSCH REGULATORS
Porsche
Saab
Volkswagen
Volvo
DESCRIPTION
se provided in either transstorized solid
(9 contact type. Vibrating type is mounted
Separate Irom alternator. Solid state type may be integral with
Gliernotor or separately mounted. Vibrator model is
‘designated “ADN” ond externally mounted solid stote type is
Gesignated "ED", Integrol mounted solid state regulator is
designoted “EE”
= For Regulator Applications and odditional Testing
procedures, see Bosch Alternators in this Section
TESTING
ON CAR TEST
Vibrator Type ~ install o bottery post adopter at the positive
post of the battery. Connect voltmeter across battery, Connect
12 tachometer 10 ignition system. Make sure all electrical
‘acessories are turned off, Start engine with battery post adap-
ter switch closed; open switch as soon as engine is started
With engine speed at 4000 RPM, after voltage reoding
sabiites, ony reading between 137 ond 148 vols is
satisfactory
Transistorized (Solid State) Regulators ~All opplicable
regulators ore designed to maintain from 13.7 to 14.5 volts of
f load current of 5 to 7 amps. Alternator should be driven at
4000 RPM and load current set at load current rating
Resistance ond speed of alternator may be recdjusted it
necessary. Read voltage within 1 minute. if nat. within
specifications, regulator requires replacement.
ADJUSTMENT
regulator fails to keep voltage within specified
limits, it must be replaced, No adjusting procedures are
recommended.
Fig. 1 Bosch Vibrator Type Alternator
Regulator
Fig. 2 Typical Bosch Transistorized
Voltage Regulater Wiring Diagram
‘ipo 200 Rapa ema Campa