Professional Documents
Culture Documents
Rev A 18.1.2013
- instructions for Numbering prefix and Product code updated
- pictures updated
Tekla Corporation
Table of contents
1. Introduction ............................................................................................................................................................................... 3
2. Normal fastening plates ........................................................................................................................................................... 3
3. Heavy duty fastening plates..................................................................................................................................................... 4
4. Light fastening plates ............................................................................................................................................................... 5
5. Parametric fastening plate ....................................................................................................................................................... 6
6. Usage of fastening plate embeds with Corbel connection (14) ............................................................................................. 7
1. Introduction
The general fastening plate custom components called embeds in Tekla Structures include
normal fastening plates (EB_FP*), heavy duty fastening plates (EB_HDFP*) and light
fastening plates (EB_LFP*). Each set can be used individually or with Corbel connection
(14) component.
The set includes also a parametric EB_FP_BxL embed which has attribute files of width
with 100mm intervals. The length of this embed is given with two definition points.
The plates are of undefined steel material, the bars of undefined studs or rebars. These all
are found in all Tekla Structures environments.
The default common parameters can be changed on dialog to match your own needs.
Product name is mapped to mainpart’s NAME field. Description and product code are UDA-
fields found in common environment’s objects.inp file. Product code can be used for
example in EPR data transfer.
Naming conventions:
EB embed
Common parameters:
Description Fastening_plate
EB_FP50x100
EB_FP100x100
EB_FP100x150
EB_FP100x200
EB_FP100x300
EB_FP150x150
EB_FP200x200
EB_FP200x300
EB_FP250x250
EB_FP300x300
Naming conventions:
EB embed
Common parameters:
Description Fastening_plate
EB_HDFP150x150
EB_HDFP150x200
EB_HDFP150x250
EB_HDFP200x250
EB_HDFP200x300
EB_HDFP250x250
EB_HDFP300x300
EB_HDFP400x400
EB_HDFP500x500
EB_HDFP600x600
Naming conventions:
EB embed
Common parameters:
Description Fastening_plate
EB_LFP50x100
EB_LFP100x100
EB_LFP100x150
EB_LFP100x200
EB_LFP100x300
EB_LFP150x150
EB_LFP200x200
EB_LFP200x300
EB_LFP300x300
The parametric EB_FP_BxL embed is used when non-standard length is needed for the
fastening plate. The given definition points determine the plate length (usually max.
2000 mm, may vary between embed providers).
On the dialog you can give the other plate dimensions as well as the anchor rod (made
as studs) length and intervals. The component includes pre-saved values for 100 mm
width intervals for normal (FP) and heavy duty (HDFP) plates. The name can be saved
in format FP + plate width / length – as an example: FP400/1200.
FP100_L
FP150_L
FP300_L
FP200_L
FP400_L
HDFP300_L
HDFP400_L
HDFP500_L
HDFP600_L
The Corbel connection (14) connection can utilize the above mentioned standard size
embeds. Open the connection dialog and go to “Reinforcing bar” tab page. Here fastening
plate is an option for the reinforcing bar. Select the plate option, then set the beam and
column parameters for the embeds.
You may need to adjust the up-direction and rotation of the fastening plates. Try first with
Auto-settings. Apply the settings, and then pick the column and the beam.