Professional Documents
Culture Documents
TRUE OR FALSE
1.___ Physical/mechanical method. Weeds can be controlled by means of hand pulling or hand weeding
2. ____Cultural method is herbicides may be used to kill weeds or suppress their growth
3.____ Preventive Method is before sowing the seeds make use of big container in soaking to allow the
weed seeds to float and discard.
4.____ Pre-planting is apply herbicide after land preparation before the crop is planted
5.____ Post-emergence is apply herbicide before the emergence of the crop or weeds.
Identification
Answers key
1. T 3.T 5. F 7. A 9.D 11. C 13.A 15.A 17.A 19. E
2. F 4. T 6. C 8. B 10.A 12. A 14.D 16.B 18. D 20. C
1. Plants that grow in places where they are not wanted.
a. Weeds c. Grass a.
b. Trees d. Fruits
2. Weeds which have long narrow, two-ranked usually flat leaves with parallel
veins and round stem.
a. Weeds c. Fruits
b. Trees d. Grasses d
3. Similar to grasses but of three-ranked leaves, and with triangular solid
stem.
a. Trees c. Sedges
b. weeds d. Grasses c
4. Dried youngest leaf of the plant during tillering stage
a. White head c. Dead heart c
b. Symptoms d.Grasses
5. Dried, unfilled white panicle during heading stage
a. Symptoms c.Grasses c
b. Dead heart d.White head
6. Observable characteristics of a diseased plan
a.Symptoms c.Grasses a
b.Dead heart d.White head
7. Dicotyledonous plants with broad leave.
a.Broad-leaved weeds c.Grasses a
b.Dead heart d.White head
8.Impairments on the normal health of the plant
a.Broad-leaved weeds c.Diseases c
b.Dead heart d.White head
9. It is the process of collecting the mature rice crop from the field
a. Harvesting c.Weeding a
b.Planting d.Cultivating
10. Itis the method of harvesting rice with the use of sickle and scythe.
a.Mechanical C. Manual
b.Planting d. Weeding c
11. Itis the method of harvesting rice with the use of a reaper or combine
harvesters.
a.Mechanical C. Manual a
b.Planting d. Weeding
12.Given the high labor requirements of manual threshing, in many countries,
threshing of rice is now mechanized by use of small stationary machine.
a.Mechanical c.Manual b
b.Threshing d.Planting
13.Itis the removal of unwanted materials from the grain such as straws,
chaffs, unfilled grains, weed seeds, soil, rubbish, and other impurities.
a.Mechanical c.Manual d
b.Threshing d.Grain Cleaning
14.Lighter materials such as unfilled grains, chaffs, weed seeds, and straw
can be removed from the grain by using a blower, air fan, or by wind.
Recover only the heavier grains.
a.Mechanical c.Winnowing c
b.Threshing d.Grain Cleaning
15.Using sifter or a net smaller materials such as weed seeds, soils particles
and stones can be removed by sieving the grain through a smaller sized screen
(1.4 mm or less sieve opening).
a.Screening/sifting c.Winnowing a
b.Threshing d.Grain Cleaning
16.Blowing.Using the thresher or mechanical blower to clean the rice grains
and using its blower to remove all unfilled grains , weed seeds, and chaff.
a.Screening/sifting c.Winnowing b
b.Blowing d.Grain Cleaning