Professional Documents
Culture Documents
Supplies Needed:
These patterns use two layers: a main/ face fabric and a lining fabric.
o The main/face can be something decorative such as cotton or flannel
o The lining (if not both layers) should be absorbent material such as terry
cloth
Snaps – plastic or metal (user preference) for all patterns except the burp rag
You may not share, sell, or otherwise distribute these patterns. However, you are free to sell items you make using these patterns.
Page 1 of 4
Funny Little Llama Designs
2. With right sides together, pin or clip in place. Stitch the outer edge using a ¼”
seam allowance, leaving 2-3” open. Trim any excess material.
2-3” gap
4. Make sure all seams are pulled taut to the outside and press/clip as necessary.
You may not share, sell, or otherwise distribute these patterns. However, you are free to sell items you make using these patterns.
Page 2 of 4
Funny Little Llama Designs
Finishing:
The burp rag is complete after the basic instruction steps. For all bibs, these steps will
help you finish the pattern.
1. Using the projected image or your printed pattern piece, mark locations for all
snaps. If you’re making the binky bib, you’ll also need to mark snaps for the binky
wrap at the bottom.
You may not share, sell, or otherwise distribute these patterns. However, you are free to sell items you make using these patterns.
Page 3 of 4
Funny Little Llama Designs
2. There is one snap on one side of the bib and two on the other. Having more than
one allows for size adjustment.
Happy Sewing!
You may not share, sell, or otherwise distribute these patterns. However, you are free to sell items you make using these patterns.
Page 4 of 4