Professional Documents
Culture Documents
PRINTING INSTRUCTIONS:
*This pattern has no trim pages. Just butt the
grey lines together, match triangles and tape.
Rectangle measurements are given in the tutorial.
*This pattern includes layered pattern tiles that
allow you to choose only the sizes you wish to
print. In Adobe Reader, open the file, then click
on the layers icon on the left. Click on the eyeball
to turn size layers on or off. Be sure to leave the
bottom layer that says “Leave checked”, on.
*Print either “actual size” or “custom scale: 100%”.
Always measure your 1” squares to
ensure proper printing.
SUPPLY LIST:
*Fabric content will affect the drape and fit. Light to medium weight knit with at least 30% stretch. A lighter
fabric with more drape will fit much looser. Cotton jersey, poly jersey, poly blends, bamboo, modal, rayon
blends, brushed poly, and light weight cotton lyrca are recommended.
*5/8” Fold over elastic
*Optional- 1/2” wash away hem tape
*Ballpoint, stretch, or jersey needle. Always use a serger or stretch stitch. Remember, the stretch of
the fabric always goes horizontally around the body. If you do not have a serger, suitable stitches are
zig-zag, lightning bolt, triple stretch or overlock stitch. When using a straight stitch with knit, increase the
stitch length to allow for stretch. Remember, do not backstitch when using the overlock stitch! Knit twin
needle optional.
*Basics: Thread, pins, scissors, ruler, hem gauge.
FABRIC REQUIREMENT CHART: Approximate by yard. Does not account for any shrinkage, print matching, or
off grain fabric. I always use my left over scraps from my daughter’s dress to put together the dolly dress! It
takes VERY little fabric for these!
14”, 15” and 18”
Top, tunic, and dress 1/3 yd
Lay bodice out flat with right side up. With right sides and raw edges together, match center of sleeve-
to shoulder seam and pin sleeve or sleeve flounce in place. Stitch. Repeat with other sleeve.
FLOUNCE SLEEVE
Fold FOE along crease so the raw edge of the neckline is enclosed. Stitch with a lengthened straight
stitch or narrow zig zag stitch.
Cut velcro to same length as bodice. Stitch hook (rough) side of velcro to RIGHT side of back bodice
piece, along center edge that you just edgestitched in place. Tip: I like to trim my velcro down to 1/2”
so it fits neatly on the back side of the bodice. Stitch loop (soft) side of velcro to WRONG side of other
back bodice piece, along center that you just edgestitched in place.
15”
top cut line 1/4” seam allowance
Made for Mermaids
(c) Brittany Reini for Made for Mermaids 2018
stretch
fold
grainline
grainline
stretch
(c) Brittany Reini for Made for Mermaids 2018
Made for Mermaids top cut line
1/4” seam allowance
Cut 2 mirror images curved tunic cut line
Back
Dolly paige straight tunic cut line
15”
15”
18”
14”
1A
1”
1”
dress cut line
18”
15”
Cut 1 on fold
Front
1B
grainline
18”
stretch
Sleeve
Dolly paige
Cut 2 on fold
Dolly paige
grainline
half sleeve cut line
Flounce
Made for Mermaids
1/4” seam allowance
18”
Cut 2 fold
1/4” seam allowance
Made for Mermaids
(c) Brittany Reini for Made for Mermaids 2018
stretch
14”
Dolly paige
Back
Cut 2 mirror images
1/4” seam allowance
Made for Mermaids
(c) Brittany Reini for Made for Mermaids 2018
stretch
14”
Dolly paige
Sleeve
Cut 2 on fold
1/4” seam allowance
grainline
stretch
14”
15” 15”
Dolly paige
Back Dolly paige
Cut 2 mirror images Front
1/4” seam allowance Cut 1 on fold
Made for Mermaids 1/4” seam allowan
(c) Brittany Reini for Made for Mermaids 2018
stretch
Made for Merma
grainline
stretch
1”
1” 2A fold
curv
straight tunic cut line straight tunic cut line
15”
stretch
Flounce
Cut 2
ly paige
Front
1 on fold
am allowance
grainline
or Mermaids 1” (c
stretch 1” 2B
fold
grainline
Dolly paige
15” Sleeve
Cut 2 on fold
1/4” seam allowance
top cut line Made for Mermaids
(c) Brittany Reini for Made for Mermaids 2018
grainline
d
long sleeve cut line
dress cut line
14”
14”
stretch
Flounce
Cut 2
Dolly paige
Front
Cut 1 on fold grainline
stretch
fold
grainline