Professional Documents
Culture Documents
Bro. KVE Bulletin HY10-1810 Americas
Bro. KVE Bulletin HY10-1810 Americas
**Recommended
Maximum Temperature
Seal Code Polymer Operating Temperature General Application & Compatibility*
with Reduced Life
Range
Hydrin -40°F to 225°F 250°F Compatible with most mineral oil-based fluids with
04
(Lo-Temp.) -40°C to 107°C 121°C enhanced low temperature performance
-40°F to 200°F 300°F Compatible with most phosphate ester fluids and
06 Butyl
-40°C to 93°C 149°C some synthetic fluids
Fluorocarbon -10°F to 250°F 400°F Compatible with most mineral oil-based fluids at
28
Elastomer -23°C to 121°C 204°C higher temperatures and some exotic fluids
* Consult your local distributor or the factory for fluid compatibility information.
** Temperature ranges may vary depending upon the fluid used in the hydraulic system.
Metal Poly
KleenVent® KVE Series
KVER001PWWT01A1 Poly 1.0 [3.79] 21.56 [547.6] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 14 [6.4]
KVER003PWWT01A1 Poly 3.0 [11.4] 34.31 [871.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 19 [8.6]
KVER006PWWT01A1 Poly 6.0 [22.7] 52.81 [1341.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 29 [13.2]
KVER012PWWT01A1 Poly 12.5 [47.3] 52.81 [1341.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #24 SAE (1 7/8-12) 35 [15.9]
KVER012MWWT01A1 Metal 12.5 [47.3] 52.31 [1328.6] 12.62 [320.5] 12.89 [327.4] 10.62 [269.7] 10.62 [269.7] #24 SAE (1 7/8-12) 70 [31.6]
KVER022MWWT01A1 Metal 22.5 [85.2] 41.31 [1049.2] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #24 SAE (1 7/8-12) 109 [49.4]
KVER032MWWT01A1 Metal 32.5 [123.0] 41.31 [1049.2] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #24 SAE (1 7/8-12) 119 [54.0]
KVER045MWWT01A1 Metal 45.0 [170.3] 53.56 [1360.4] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #24 SAE (1 7/8-12) 150 [68.0]
KVEU001PWWT50A1 Poly 1.0 [3.79] 21.56 [547.6] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 14.2 [6.4]
KVEU002PWWT50A1 Poly 2.5 [9.46] 21.56 [547.6] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 15 [6.8]
KVEU005PWWT50A1 Poly 5.0 [18.93] 34.31 [871.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 19 [8.6]
KVEU010PWWT50A1 Poly 10.0 [37.85] 34.31 [871.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 20 [9.0]
KVEU020PWWT50A1 Poly 20.0 [75.81] 52.81 [1341.4] 12.88 [327.0] 4.00 [101.6] 8.38 [212.7] 10.38 [263.5] #16 SAE (1 5/16-12) 28 [12.7]
KVEU020MWWT50A1 Metal 20.0 [75.81] 52.31 [1328.6] 12.62 [320.5] 12.89 [327.4] 10.62 [269.7] 10.62 [269.7] #16 SAE (1 5/16-12) 63 [28.6]
KVEU030MWWT50A1 Metal 30.0 [113.6] 41.31 [1049.2] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 93 [42.2]
KVEU040MWWT50A1 Metal 40.0 [151.4] 53.56 [1360.4] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 114 [51.7]
KVEU050MWWT50A1 Metal 50.0 [189.3] 53.56 [1360.4] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 115 [52.2]
KVEU060MWWT50A1 Metal 60.0 [227.1] 73.81 [1874.7] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 150 [68.0]
KVEU080MWWT50A1 Metal 80.0 [302.8] 73.81 [1874.7] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 151 [68.5]
KVEU100MWWT50A1 Metal 100.0 [378.5] 87.06 [2211.3] 21.12 [536.4] 21.39 [543.4] 19.12 [485.6] 19.12 [485.6] #16 SAE (1 5/16-12) 174 [78.9]
* Metal enclosures are constructed from 16 gauge steel and painted with a black power coat both interior and exterior.
* Poly enclosures are molded from a black polyethylene material and are a two piece design for top reparability.
Installation Kits
Add closed-loop protection without shutting down, purging the reservoir, contaminating existing fluids or losing time.