You are on page 1of 8

Capo LED

PRODUCT SPECIFICATION

INTRODUCTION

Combining efficiency with form the Capo LED provides an architectural solution in suspended applications for both ambient
and accent lighting. With anodised spun rear housing, translucent collar available in a range of colours and opal refractor
the Capo LED provides a decorative and attractive installation that can also be tailored to suit any corporate theme.

With two lumen options and both dimming and emergency functions the performance of the Capo can also be customised
to your needs. In all options the control gear is housed within the same luminaire design with no need for remote packs or
ceiling housings ensuring that the look and feel of the space is not compromised.

The Capo LED is supplied with a highly efficient chip on board source providing similar lumens to 70w HID sources whilst
typically consuming half the energy and eliminating the need to replace lamps ensuring significant operating cost reduction
compared to HID alternatives.

APPLICATION

Commercial/Offices
Education
Healthcare/Social Housing
Hotel/Leisure
Retail

T: 01747 858100 | E: sales@dexretail.co.uk | Page 1 of 7


Capo LED
PRODUCT SPECIFICATION

SPECIFICATION

Construction
Anodised spun aluminium housing.
Translucent collar in a range of colour options.
Opal refractor.

Performance
Available in 2992llm and 3847llm luminaire lumen options.
Philips Lumileds LM80 verified: 90% LED lumen maintenance at 60,000 operating hours.

Control
Available with Digital, DALI, Switch Dimming and Analogue Dimming control gear.

Emergency
Available in three hour self test and standard emergency integral to the luminaire.

Installation
Supplied complete with three metre suspension cable.

IMAGES

Product Images

T: 01747 858100 | E: sales@dexretail.co.uk | Page 2 of 7


Capo LED
PRODUCT SPECIFICATION

Project Images

T: 01747 858100 | E: sales@dexretail.co.uk | Page 3 of 7


Capo LED
PRODUCT SPECIFICATION

TECHNICAL

CAPO LED

WARRANTY

All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time.
Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis
and credit given against defective product returned. The course of action taken will be at our discretion and dependent on
the nature of the defect.

The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up
to 5 years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge
components only for the final 2 years.

PROTEC LED FR 8W GU10 luminaires and all Emergency LED ranges such as LED 3, EXI, HBE, OAT, OEZ, AME, OEH and TWS
* are exempt from the 5 year warranty and are supplied with 1 year warranty only. PROTEC LED COB luminaires are
supplied with a two year warranty for replacement luminaires only.

All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation
or unsuitable environmental conditions.

It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or
replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In
the event that no defect is found with the product our costs for attending site will be recharged to the customer and credit
will not be issued against returned products.

No consequential losses incurred resulting from any defect with our product will be reimbursed.

T: 01747 858100 | E: sales@dexretail.co.uk | Page 4 of 7


Capo LED
PRODUCT SPECIFICATION

Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are
supplied with a twelve month warranty only.

5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where
failures exceed the component manufacturers expected failure rate and lumen depreciation.

If you require any assistance with regards to our products please do not hesitate to contact our Customer Services
department on 01747 858100.

*The LED4 Emergency LED range is supplied with a three year battery warranty and 5 year luminaire warranty.

ORDER CODES

Luminaire Codes
Code Description Circuit Wattage Llm/w
CAP L35 Capo LED, 2735llm, Translucent Grey Collar, Grey Housing, Colour 84 (ECA) 24.6w 111
CAP L45 Capo LED, 3533llm, Translucent Grey Collar, Grey Housing, Colour 84 (ECA) 33.5w 105
Supplied complete with 3m suspension kit.
Other collar colours available on request (dependent on quantity)

Dimming & Control Gear


Code Description
H High Frequency Dimming (Analogue 1-10v)
S Switch Dimming
D Digital Dimming (DSI)
A Digital Addressable Lighting Interface (DALI)

Emergency
Code Description
E3 3 Hour Maintained Emergency Pack (Integral)
ST3 Self Test
Not available with 4500 lumen options

Miscellaneous
Code Description
WH White Housing
C83 Colour Rendering Index 80, Colour Temperature 3000K
CAPO / CAPO XL Installation

230-240V / 50-60Hz WARNING - THIS LUMINAIRE MUST BE EARTHED


IP20 This luminaire has been tested and is manufactured to comply with BS
IK00 EN 60598 : specification for general requirements and tests. It should be
installed by a suitably qualified person in accordance with IEE.
CAUTION: there is a potential risk of electric shock from the LED boards
when the product is operational with the cover removed.
NOTE: INSTALLATION AND OPERATION OF THE LUMINAIRE
BEYOND ITS SCOPE OF SUPPLY WILL INVALIDATE THE
WARRANTY.

1 2

CAPO

CAPO CAPO XL
CAPO XL
<remove cover screws for access>

3 4
(b)
(a) Secure to ceiling

This screw
NOT supplied!
(c)

CAPO XL – suspend via eyebolt using Gripple


wire <supplied> NOTE – method of attachment
CAPO – fit adjustable clutch – to ceiling determined by installer!
suspend using wire kit <supplied>

5 6

Dimming + Dimming Non-


Emergency Only Dimming

CAPO shown – note luminaire


may be supplied pre-wired

DIL-0127-0001_C 31/01/17
CAPO / CAPO XL Installation

7 8

Cable must be clamped! - CAPO Cable must be clamped! – CAPO XL

9 10

CAPO CAPO XL

11 12

13 14

DIL-0127-0001_C 31/01/17

You might also like