Professional Documents
Culture Documents
ABB standard drives can be used in a wide − − Many assistants including Start-up, Drive ACS550 standard drives
range of industries. These drives are ideal Optimizer, ACS550-U1, wall mount
in those situations where there is a need − − Real-time Clock, Diagnostics, Maint − − NEMA 1 & 12 enclosures
for simplicity to install, commission and use nance, Serial and PID − − 1.0 to 100 HP @ 240Vac
and where customizing or special prod- − − Seismic Certification to ICC AC-156 − − 1.5 to 200 HP @ 480Vac
uct engineering is not required. The drives Criteria − − 2.0 to 150 HP @ 600Vac
include several features as standard, such
as swinging choke, EMC filter and control Voltage and power range ACS550-PC/PD, wall-mount packaged
panel. − − 3-phase, 208 to 240 V, 0.75 - 100Hp − − NEMA 1, 12 & 3R enclosures
− − 3-phase, 380 to 480 V, 1 - 550Hp − − 0.75 to 100 HP @ 240Vac
Energy efficiency achieved with ABB stan- − − 3-phase, 500 to 600V, 1.5 - 150Hp − − 1 to 200 HP @ 480Vac
dard drives can be easily monitored using − − 1.5 to 150 HP @ 600Vac
the built-in counters, which display energy Applications − − Circuit Breaker (PC)
savings in kilowatt hours, carbon dioxide − − Pumps and Fans − − Fused disconnect (PD)
emissions or local currencies. − − Conveyors
ACS550-PC, free standing packaged
Highlights Options − − NEMA 1 & 12 enclosures (NEMA 12 std.
−− Advanced control panel permitting − − Fieldbus adapters 450-550 HP)
intuitive operation − − Panel mounting kits − − 250 to 550 HP @ 480Vac
−− Patented swinging choke for superior − − DriveWindow Light 2 software − − Circuit Breaker (PC)
harmonic reduction (R1-R4) and AC line − − Brake units and resistors
reactor (R5-R8) − − Encoder feedback module
−− Sensorless vector control − − Relay output extension module
− − Integral EMC filter as standard − − Flange mountin kits
−− Built-in Modbus RTU and numerous − − FlashDrop tool
internally mountable fieldbus adapters
−− FlashDrop
−− Coated boards for harsh environments
−− UL, cUL, C-Tick and Gost-R approved
− − Built-in brake chopper (10Hp, 230V /
15Hp, 480V and 600 V)
Input power connection
ACS550-CC, wall mount & free standing Voltage and power range 3-phase, 208 to 240 V, +10/-15%, 0.75 - 100Hp
−− Three contactor Bypass 3-phase, 380 to 480 V, +10/-15%, 1 - 550Hp
3-phase, 500 to 600V, +10/-15%, 1.5 - 150Hp
−− Wall mount Frequency 48 to 63 Hz
− − NEMA 1, 12 & 3R Power factor 0.98
− − 1 to 100 HP @ 240Vac Motor connection
− − 1 to 400 HP @ 480Vac Frequency 0 to 500 Hz
− − 1.5 to 150 HP @ 600Vac Acceleration time 0.1 to 1800 s
−− Free standing Deceleration time 0.1 to 1800 s
− − NEMA 1 & 12 Programmable control connections
− − 250 - 400 HP @ 480Vac Two analog inputs
240V products: UL, cUL, CSA, CE, C-TICK, and GOST-R approvals
480V products: UL, cUL, CSA, CE, C-TICK, and GOST-R approvals
600V products: UL, cUL, CSA, C-TICK, and GOST-R approvals
Environmental Limits
Protection class UL Type 1 or 12 (NEMA 1 or NEMA 12)
Ambient temperature 15 to 40oC (5 to 104oF)
40 to 50oC (104 to 122oF)
No frost allowed
fswitch 4 kHz, PN and I2 derated to 90%
Relative humidity lower than 95% (without condensation)
www.abb.us/drives