Professional Documents
Culture Documents
165mm
165mm
165mm
2- 8
Water Water Fan Coil
1
0 20 50 ~
1
0 20 50 ~
mm
mm 025 200
040 400
0
060 600
025 200
080 800
040 400
100
060 600
080 800
100
90
90
:
PFP
90
90
electrothermal Bellows
Remote controller Feet
3-way valve
UNIVERSAL A/C REMOTE
PM 10:50 0 00
TEMP
MODE FAN
ON/OFF
PFP-025V-C PFP-040V-C PFP-060V-C PFP-080V-C PFP-100V-C
3.3.1 Product model: PFP-025/040/060/080/100V-C
•••
•••
••
•••
•••
••
m
16 5m
te hole
er of 2- 8 Loca
the cent
nce from top edge of
m The distahole to
the
16 5m loca te is 165m
m
er of mac hine
line the cent
Level
check nce from top edge of
The distahole to
the
loca te is 165m
m
mac hine
te hole
2- 8 Loca
valv e
3-wa y
inlet hole erma l lates
Wat er elec troth two temp
with out betwe en nt when
spac e
that the table requi reme
Make sure the
rding to 025 to 100.
is acco PFP
templ ates insta lling
en two
space betwereme nt when
that the requi
Make sureding to the table100.
is accor PFP 025 to
insta lling
inlet hole
Wat er
hole
outle t
Wat er
een
nce betw )
The dista lates (mm
two temp
Mo del 0
een
nce betw )
The dista lates (mm 025
two temp 200
Mo del 0 040
400
025
200 060 600
040 080
400 800
060 100
600
080
800
100
hine
m of mac
The botto
hole
ation drain
Con dens
this line
alon g
degr ee
Fold 90
90
hine 3030 9
of mac
m this line :200 00-2
The botto alon g late code
degr ee PFP temp
Fold 90
floor
to the
Para llel
90
to the floor
Para llel
hole
r pipe
for wate
d area
Res erve
A D
B C
5.Usage
C. Temp. setting
At the main interface, press or to start changing target temp, and press ..
Or again to increase or decrease the temp. value.
Attention: Users can setting target temp only in cooling mode and heat mode.
At the main interface, press to switch fan speed to low, medium, high or auto.
Press.
Press
Press
Press
Attention: At Auto mode, the fan speed will be adjusted automatically according to the ambient
temp. At Dehumidifying mode, the fan speed is low.
E. Timer mode
Attention:
During the setting, if you press or 5s no operation, your setting will be saved automatically
and the display will go back to main interfaceor OFF interface.
At the main interface, press and at the same time to check coil temp..
Attention: Users can only check the parameter, but can not change it.
G. Keyboard lock
H. Fault
Press or
Press to turn
to switch the fault
to the main interface.
number.
Press to turn
to the fault interface.
5.4. Usage of remote controller
5.4.1 Function of F.Cool and F.Heat
Pressing the key F.Cool , the system will be automatically set to cooling mode , high
wind speed and automatic wind direction.
Pressing the key F.Heat , the system will be automatically set to heating mode , high
wind speed and automatic wind direction.
5.4.2 Setting of clock
Press the key CLOCK and hold till the relative light flashes, then you could start to
set the time. Press the key + or - to increase or decrease the setting temperature.
Press the key CLOCK again to save setting and return to main interface.
5.4.3 Setting of timing startup or shutdown
TIME OFF The key is available when the unit is on.
01 The number 01 means the unit will shut down automatically after 1 hour and
so forth.
TIME ON The key is available when the unit is on.
01 The number 01 means the unit will turn on automatically after 1 hour and so
forth.
5.4.4 Setting of Sleep Mode
a.Press the key SLEEP the system will be automatically set to sleep mode, then
you could start to set the sleep time ,press the key TIME OFF to increase the sleep time
.press SLEEP once again for cancelling sleep mode.
b.You can setting of sleep mode only in cooling mode and heating mode .
In cooling mode, the target temperature will increase 1 after one hour the target
temperature will increase 1 after two hours ,it will not changing after later.
In heating mode ,the target temperature will decrease 1 after one hour ,it will
decrease 1 after two hours it will decrease 1 after three hours once again it will not
changing after later.
5.4.5. Parameter
controller
Centralized
FP1000
FP1000
FP1000
CN1 R E C
DATA
CN2
C L K
COM1
RST GNDSWM5V
PROG1
COM2
COM3
KEY1
KEY2
KEY3
KEY4
KEY5
BUZZ
+15 V
RLY1 RLY3 RLY2
GND
2
GND CN6
STEP1
STEP2
STEP3
STEP4
+12V +12V
485A
485B
GND