Professional Documents
Culture Documents
No CAS MT 012E
CUSTOMER ACCEPTANCE STANDARD Date Apr 2004
Replaces May 2000
Page 1/2
M710B is a randomly oriented chopped strand mat product composed of multi length glass fiber strands. The
strands are coated with a silane coupling agent and are bonded together in mat form using a small amount of highly
soluble polyester powder.
M 710B is produced using Advantex® glass fiber. Advantex glass fiber combines the electrical and mechanical
properties of traditional E glasses with the acid corrosion resistance of E-CR glass. Advantex® meets the
requirements stated of both E and E-CR glass in both ISO 2078 and ASTM D578-98.
2. USE
M710B is designed to be compatible with polyester, epoxy and vinylester resins and used both as gel coat backup
and standard laminate reinforcement for most contact molding applications where quick wetting, rapid air release,
good conformability and low resin consumption are desired.
b) Width (cm)
Specification
Property Mat Weight Test Method
Min. Nom. Max. (3)
225 180 225 270
300 240 300 360
Weight uniformity (gsm) 375 300 375 450 MA MT - 001
(1) 450 360 450 540
600 480 600 720
225 4,00 5,50 7,00
300 2,40 3,40 4,40
Solid (%) 375 2,00 2,80 3,60 MA MT - 002
(2) 450 1,50 2,00 2,50
600 1,50 2,00 2,50
225 10 20 80
300 10 30 80
Tensile kgf / 0.1 sqm 375 10 30 80 MA MT - 004
450 10 30 80
600 10 30 80
Width (cm)
All -2 Nom. +2 MA MT - 012
2 side trimmed
A. Roll-up
The mat is wound on a 10 cm inside diameter carton tube to an overall outside diameter of approximately 32cm.
B. Wrap-ins rolls
On occasion it will be necessary to wrap in rolls. Wrapped in rolls will consist of 3 pieces only, the shortest of
which will have a minimum length of 10 meters. The location of the wrap will be flagged by a strip of coloured
paper.,
E. Storage conditions
Unless otherwise specified, it is recommended to store glass fiber products in a cool dry area. Glass fiber
products must remain in your original packaging until just prior to its use.
If these conditions are respected, no shelf line is established.
6. LABELING REQUIREMENTS
Each pallet of mat is labeled on the outside with the following information:
- Product code
- Width of the roll
- Date of manufacture
- Weight of roll
- Team
- Number of the roll