Professional Documents
Culture Documents
The Call Setup Time
The Call Setup Time
The setup phase starts when the exchange receives one of the following messages
(depending on the signalling protocol) from an adjacent network element:
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)
. 'alerting' message (in BSSAP cases)The Call Setup Time and Success Measurement
measures the setups and their duration. The setup phase starts when the exchange
receives one of the following messages (depending on the signalling protocol) from
an adjacent network element:
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)
. 'alerting' message (in BSSAP cases)The Call Setup Time and Success Measurement
measures the setups and their duration. The setup phase starts when the exchange
receives one of the following messages (depending on the signalling protocol) from
an adjacent network element:
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)
. 'alerting' message (in BSSAP cases)The Call Setup Time and Success Measurement
measures the setups and their duration. The setup phase starts when the exchange
receives one of the following messages (depending on the signalling protocol) from
an adjacent network element:
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)
. 'alerting' message (in BSSAP cases)The Call Setup Time and Success Measurement
measures the setups and their duration. The setup phase starts when the exchange
receives one of the following messages (depending on the signalling protocol) from
an adjacent network element:
. Initial Address Message (IAM) (in ISDN User Part/Bearer Independent Call Control
(ISUP/BICC) cases)
. 'CM service request' message (in Base Station System Application Part (BSSAP)
cases)
The setup phase ends when it is completed with one of the following messages
(depending on the signalling protocol):
. Address Complete Message (ACM) or 'Connect' (CON) messages (in ISUP/BICC cases)