Professional Documents
Culture Documents
42004
42004
Program AE AF mode One-Shot AF Metering mode Evaluative Film advance mode Single Focusing point selection | Automatic Multiple exposures Canceled Exposure compensation | 0 Flash exposure compensation | 0 AE lock Canceled FE lock Canceled AEB Canceled Custom Functions Settings retained Focusing point registration | Center focusing point Program AE (-p.29). When the camera is reset, the shooting mode will be set automatically to
Resetting all Custom Functions except C.Fn-0 (p.98) to the
default settings
< CLEAR > button.
Funetion.”
‘Open the side door, press the
on the LCD panel.
+ While pressing the .
Then release the mode, you can freely change the shutter speed
and aperture combination (program) set by the camera while retaining the
same exposure value. This is called shifting the program.
To shift the program, press the shutter button halfway and turn the
dial until the desired shutter speed or aperture is displayed.
al The program shift setting is canceled after the picture is taken
31Holding the Camera =
To obtain sharp pictures, hold the camera still to minimize camera shake.
Horizontal shooting Vertical shooting
+ Firmly grasp the camera grip with your right hand, and press your right
elbow lightly against your body.
+ Hold the lens at the bottom with your left hand.
+ Press the camera against your face and look through the viewfinder.
+ To maintain a stable stance, place one foot in front of the other instead of
lining up both feet.
al The camera can automatically sense whether it is in the horizontal or vertical
position. The camera's internal detector will make a small sound when detecting
the horizontal or vertical position.
32The Area AF ellipse has 45 focusing
points. By selecting the optimum
focusing point, autofocusing can be
executed while you maintain the desired
subject framing. You can also set the AF
Mode to suit the subject or intended
effect.
Using Autofocus (AF)
(a at))
OFF
First set the <@)> switch and < @ >
@ switch to dial.
> Turn the <@)> to quickly select a
peripheral focusing point.
(I A peripheral focusing point can also be selected with the <(@}> dial alone.
(C.Fn-11-23.105)
40Focusing Point Selection
Selecting the center focusing
point
+ Press the < button and press the
<[J> button.
» The center focusing point will be
selected.
il When you select spot metering, it will be linked to the selected focusing point.
(3p.52)
With C.Fn-18, you can select the center focusing point by pressing (and Eg
releasing) or holding down the <[<]> button. (p.109)
(Ezd The manual selection method can be altered as follows:
(1) C.Fn-11-1 gives the < $< > button the function of the <
(>p.105)
(2) C.Fn-11-2 gives the < $4 > button the function of the < FJ > button. The
<)> dial can also be used by itself. (>p.105)
(3) C.Fn-11-2 can switch manual focusing point selection to automatic
selection. (+p.105)
(4) C.Fn-11-3 gives the