Professional Documents
Culture Documents
To secure the balance, a lock or cable assembly may be passed through the holes
in the shaft and secured to a permanent structure.
Anti-Theft Kit
Securing Above a Work Surface
If desired, the balance may be secured on top of a work surface. Simply leave the shaft
P/N 77401-00
extending outward from the rear of the balance and secure it to a permanent structure
above the work surface.
OHAUS CORPORATION
P.O. Box 900
29 Hanover Road
Florham Park, N.J. 07932
Tel: 973-377-9000
Fax: 973-593-0359
CAUTION: Screws are tamper-proof and not easily removed once installed.
2 TAMPER-PROOF
SCREWS
SHAFT
BRACKET SCREWS
BUSHING
BRACKET
Figure 2
Figure 1
Figure 3
UNPACKING 1. Set the balance on its back and position it at the edge of a work surface as shown
in Figure 2.
Carefully unpack the components from the carton and make sure the items shown in
Figure 1 have been included: 2. Using a screwdriver, remove the two slotted screws at the bottom of the base,
then fasten the BRACKET to the bottom of the balance using the two tamper-
proof SCREWS provided (see Figure 2).
CAUTION: Screws are tamper-proof and not easily removed once installed.
2 TAMPER-PROOF
SCREWS
SHAFT
BRACKET SCREWS
BUSHING
BRACKET
Figure 2
Figure 1
Figure 3
SECURING THE BALANCE
To secure the balance, a lock or cable assembly may be passed through the holes
in the shaft and secured to a permanent structure.
Anti-Theft Kit
Securing Above a Work Surface
If desired, the balance may be secured on top of a work surface. Simply leave the shaft
P/N 77401-00
extending outward from the rear of the balance and secure it to a permanent structure
above the work surface.
OHAUS CORPORATION
P.O. Box 900
29 Hanover Road
Florham Park, N.J. 07932
Tel: 973-377-9000
Fax: 973-593-0359