Professional Documents
Culture Documents
& KNOBS
HANDLES
KNOBS
HANDLES KNOBS HANDLES & KNOBS
HANDLES &
KNOBS
HANDLES
ADJUSTABLE-TORQUE QLCCS
COMPACT CAM HANDLES
HANDLES
Part No. ATCL Part No. QLCCS
KNOBS
Torque-adjusting Screw
Locking Screw
(Orange) D
A
W
(Black) W2(Across Flats)
R
H2
H
H1
H3
Lf
W1
M H4
D1
2
L
M B
(Stud) (Tapped)
Feature ・Tapped type has a through hole that can be used with bolts.
・The handle is adjustable. Bolt
・Handle that allows setting a desired tightening torque.
・When the desired torque is reached, the handle Tapped type
clicks to indicate completed tightening.
How To Use
Click
1.Lift the handle to disengage 2.Turn the handle to 3.When the handle is released, the 4.Turn the handle to clamp.
the teeth from the locking a desired position. return spring automatically engages The handle clicks to indicate completed
element. the teeth again for further tightening. tightening at desired tightening torque.
The handle can be positioned every
30 degrees.
At maximum torque
1.Loosen the locking screw by inserting a 2.Adjust the torque by turning the torque- 8
hex. wrench into the underside of the body. adjusting screw in the side of the body.
ATCL10
Torque(N・m)
6
Torque Wrench
4 ATCL8
ATCL6
2
A
T
t
X
Hex. Socket Setscrew
M3×0.5-3L D2
Section X-X
Stro
ke
250°
(Cam)
D1
2
D
M
(Tapped) (Stud)
Size D1 R A D M T t B D2
03 8 20 10 10 M3×0.5 8 3.5 9 5
QLCCS 04 10 25 13 12 M4×0.7 10 4.5 11 6
05 12 32 16 14 M5×0.8 12 5.5 13 8
Feature
The handle position of Stud-type Compact Cam
Handles can be set to a desired direction.
How To Use
■Application Example ■Fixing the Cam Handle
Brass Pad
Unclamping Position
Hex. Socket Setscrew
Clamping Position
1.Fix the stud to the handle 2.Turn the handle to a desired 3.With a flathead screwdriver,
with a brass pad and a hex direction and loosen the adjust the handle to a desired
socket setscrew and screw the setscrew. clamping height and the load
Compact Cam Handle to the to fold the handle. Then fix
counterpart. the stud with the setscrew.
(Tapped) (Tapped)
QLCA (Stud) QLCA-NP (Stud)
(Black Oxide Finish) (Electroless Nickel Plated)
Style Handle Ring Nut / Washer Stud
SCM440 steel S45C steel SCM435 steel
QLCA Quenched and tempered Quenched and tempered Quenched and tempered
Black Oxide Finish Black Oxide Finish Black Oxide Finish
SCM440 steel S45C steel SCM435 steel
QLCA-NP Quenched and tempered Quenched and tempered Quenched and tempered
Electroless Nickel Plated Electroless Nickel Plated Electroless Nickel Plated
R Groove for adjustment of
Brass Pad M
handle operating position
X
A
T
B
X
M1 Hex. Socket Setscrew
Section X-X D2
Stro
ke
250°
(Cam)
D1
T1
D M
Bottom
(Tapped) (Stud)
Size D1 R A D T1 M T t B D2 M1
04 12 40 14 12 M 4×0.70 10 4.5 12 8
2 M3×0.5-3L
QLCA
05 15 50 16 14 M 5×0.80 12 5.5 14 10
06 18 63 19 16 M 6×1.00 14 6.5 16 12
QLCA-NP 3 M4×0.7-4L
08 22 80 24 20 M 8×1.25 18 9.0 20 15
10 28 100 30 25 5 M10×1.50 23 11.00 25 18 M5×0.8-5L
Clamping Allowable Clamping Clamping
Size
Stroke Operating Load (N) Force (kN) Mechanism
04 1.8 80 0.9
QLCA
05 2.3 100 1.3
Spiral Cam
06 2.7 150 2.4 Cam Angle : 4°
QLCA-NP
08 3.3 200 3.6
10 4.3 300 4.8
Feature
The handle position of Stud-type Cam Handles
can be set to a desired direction.
Hex.Socket Setscrew
1. Fix the stud to the handle with 2. Turn the handle to a desired 3. With a flathead screwdriver,
a brass pad and a hex socket direction and loosen the adjust the handle to a desired
setscrew and screw the Cam setscrew. clamping height and the load
Handle to the counterpart. to fold the handle. Then fix
the stud with the setscrew.
★Key Point
Easy clamping and unclamping.
Handle clicks at clamping end.
(Tapped)
Handle Ring Nut / Washer Stud
SCM440 steel S45C steel SCM435 steel
Quenched and tempered Quenched and tempered Quenched and tempered
Electroless nickel plated Electroless nickel plated Electroless nickel plated
(Stud)
t t
X
Hex. Socket Setscrew X
Hex. Socket Setscrew
M4×0.7-4L
M4×0.7-4L D2
Section X-X D2
Section X-X 5° R
5 ° R
D1
D1
40°
40°Throw)
(Advance
(Advance Throw)
Clamping
Clamping
33
65°
Stroke
65°
LL
Stroke
D M
D M
(Tapped) (Stud)
(Tapped) (Stud)
Clamping
Type D1 R A D M T t B D2
Stroke
06 19.4 63 14 16 M6×1.00 14 6.5 16 12 0.3
QLCL-NP
08 23.2 80 18 20 M8×1.25 18 9.0 20 15 0.4
How To Use
■Application Example ■Fixing the Cam Handle
Brass Pad
5°
Washer
Flats at the cam end
1.Fix the stud to the handle with a brass 2.Turn the handle to a desired direction and 3.With a flathead screwdriver, adjust the
pad and a hex socket setscrew and screw loosen the setscrew. handle to a desired clamping height and
the Cam Handle to the counterpart. the load to fold the handle. Then fix the
stud with the setscrew.
ONE-TOUCH
k!
k!
ic
ic
Cl
Cl
Blue= Safety to
operate machine Red=Caution to
opearate machine
LOCKING KNOBS
Application Example
Adjsutment of film tension in printing machine Changes of camera position Changes of shooter angle
(Rack and pinion) (Leadscrew)
★Key Point
Secure locking of spindle with one-touch action!
44
38 5
32
φ40 25 13 13
2-φ11−0.2
0
M5×0.8
φ5.5
φ9.5
34
φ
70N
Spindle
〈Unlocked〉
・Allowable moment at locking position:
28N・m(Safety Factor = 5)
28N・m
Blue indicates safety to
operate machine.
〈Locked〉
How To Use
■How to Operate
Click!
Click!
By pulling the housing until it Turn OTLK to rotate the By pushing the housing until it
clicks, the teeth of the knob spindle. clicks, the teeth engage again and
disengage from the base. lock the rotation of the spindle.
M5×0.8-5L (included)
Tapped Hole for Setscrew
Socket-Head Cap Screw
M5×0.8 Depth10 Flat M5×0.8-15L (included)
D
Size
(g6)
OTLK4008 8
OTLK4010 10
*)Prepare clearance of
13mm or more from
e
or
spindle stroke.
or
6
**)Recommended surface
ht
le
ep
D
0 1
0.
pi
11 +
Leadscrew
fo
2-
Size d1
13 13
OTLK4008 9
OTLK4010 11
10
7
Body
SUS304
stainless steel
Weight
Part Number
(g)
OTLK40-A 21
How To Use
・Use with scale plate for reading graduations in radial
feeding applications such as rack and pinion.
・Insert Pointer Plate to the slot on the base component
of One-Touch Locking Knobs.
24
20
48
(Tapped) 28
9
8
1
L
φ10 M M
φ26
(Tapped) (Stud)
(Stud)
Knob Insert
Polyamide (glass-fiber reinforced)
★Key Point Black matte
S45C steel
Electroless nickel plated
Tightening end is detectable by sound and touch of a click. Orange matte
■Tapped ■Stud
Part Number Weight Part Number Weight
L
Black Orange (g) Black Orange (g)
CTK48-5-2BK CTK48-5-2OG 35 CTK48-5×10-2BK CTK48-5×10-2OG 37
10
CTK48-5-3BK CTK48-5-3OG 36 CTK48-5×10-3BK CTK48-5×10-3OG 38
CTK48-6-2BK CTK48-6-2OG 34 CTK48-5×16-2BK CTK48-5×16-2OG 38
16
CTK48-6-3BK CTK48-6-3OG 35 CTK48-5×16-3BK CTK48-5×16-3OG 39
CTK48-6×16-2BK CTK48-6×16-2OG 39
16
CTK48-6×16-3BK CTK48-6×16-3OG 40
CTK48-6×25-2BK CTK48-6×25-2OG 41
25
CTK48-6×25-3BK CTK48-6×25-3OG 42
Feature
・Can be tightened with the specified torque.
・The spring and the balls inside provide a touch Click!
of click when the knob reaches to the specified Fastened!
torque at the tightening end.
・The knob can keep rotated to the desired
position after reaching to the specified torque.
Technical Information
Working temperature : Between 0℃ and 80 ℃
How To Use
Clamping Elements
Related Product
ATCL Adjustable-Torque Handles