Professional Documents
Culture Documents
Rcs-5 FPP/B Rcs-5 FPP/B: Controls and Displays Controls and Displays
Rcs-5 FPP/B Rcs-5 FPP/B: Controls and Displays Controls and Displays
Operating mode Active Black arrow: Setting limit not yet reached
Control station Active Light arrow: Setting limit reached
Single control lever mode (= SCL mode) Active Meas. values
Depending on page displayed:
Flashing, target control station during command transfer Symbol info – Displays sub-page for the selected entry
– Activates/confirms/deactivates selected entry
– Acknowledges flashing alarm entry on the alarm page
Notes System info
Quick reference chart for RCS-5 FPP/B Page 1 E 531 868 / 00 E – 04.99 –
FRIEDRICHSHAFEN
RCS-5 FPP/B RCS-5 FPP/B
Operation Operation
Command transfer Activating/deactivating Single Control Lever
Observe safety requirements and instructions in the
full version of the RCS-5 FPP/B documentation! Relinquishing command mode (SCL)
Active control station: Consoles page Activating
Press pushbutton Select same control
station for all shafts
Assuming initial command Select target e.g. bridge (change
control station control station as
Switch on the At every control station Press pushbutton necessary)
operating voltage capable of assuming
initial command: Selecting the SCL active control lever:
Pushbutton flashes Target control station:
At the control station which is to Buzzer on Lit Lit
Press pushbutton Press pushbutton
assume command:
Quick reference chart for RCS-5 FPP/B Page 2 E 531 868 / 00 E – 04.99 –