Professional Documents
Culture Documents
AIM:
Assembling and disassembling of pc
EQUIPMENTS/TOOLS/COMPONENTS
REQUIRED:
2 Motherboard
3 Motherboard standoffs
and screws
4 CPU SL8HX Dell,
incC7600 P4
2.8GHZ
800MHZ FSB HT
1MB PROC
5 RAM module(s)
B)RAM
Random Access Memory(RAM) is fast-
access memory that is cleared when the
computer is power-down.
C) ROM
ROM stands for Read-Only Memory. It is a
non-volatile memory that is used to
stores important information which is
used to operate the system.
F)CPU
H) SMPS
SMP( (Symmetric Multi-Processing)
I) HDD/SSD
J) OPTICAL DRIVE
A computer system with an optical drive
allows users to use DVDs, Blu-ray discs, or
CDs.
K) CHASSIS
L) Fan (System Fan & CPU Fan)
1) Thermal Paste
PROCEDURE:
Disassembling of CPU :
1) Remove Side Panel.
2) Unplug all wires/cables.
3) Remove Hard Drive slowly.
4) Remove Optical Drive from the
optical drive holder
5) Remove Power Supply
6) Remove RAM by taking out the clips
of RAM holder
7) Remove Heatsink with screw drivers
8) Remove CPU
9) Clean with ispropyl alcohol
10) Remove Case Fan
11) the last step is to Remove
Motherboard.
Assembling of a CPU
1) Put in RAM, CPU, Heat Sink
&Motherboard in their original
places.
2) Put in Case Fan
3) Put in Optical Drive
4) Put in Hard Drive
5) Put in Power Supply
6) Connect power supply cables
7) Connect SATA cables & Pins
correctly in their pins
8) Add video card.