Professional Documents
Culture Documents
折纸图解 / Diagrams
002
拳头紧握 对角线折 24小时
Clench Fist Fold Diagonal 24 Hour
--Page / 092 --Page / 100 --Page / 112
锦鲤 禁止吸烟 安全出口
Koi Fish No Smoking Exit
--Page / 149 --Page / 157 --Page / 165
折痕挑战
Crease Pattern
Challenge
我爱你 纸鹤钟表
I Love You Crane Clock
--Page / 175 --Page / 184
003
简介
Introduction
我是苦茶 / Kucha
刚开始的时候,我只会折叠一些简单的模型。但在这个的基础 At first, I only folded simple models. But that's how I learned the
rulesofmodernorigami.ThenIstartedtofoldallkindsoforigami.
上,我了解了现代折纸的一些规则。然后,我便开始折叠各种
Amongthemanytypesoforigamithatexist,Ihaveasoftspotfor
类型的折纸。在众多的折纸类型中,我非常的偏爱:平面双色 the two-colored flat models.
2015以后,我便一直默默的收集平面双色的作品。这个时候我 Since 2015, I have been quietly collecting flat pieces in two-color.
That's when I realized that only a few people were interested in
才发现,只有少数人对这类模型感兴趣。
this type of pattern.
这让我有些沮丧,但我同时也意识到:“相比其它类型的折纸模 It was a bit frustrating, but I also realized that "the constraints of
designing this type of model are probably less than for other
型,设计这类模型受到的限制可能会更小”。或许我应该去设计
types of origami models". Maybe I should design some models.
一些模型。是的,我也确实这样做了。 And yes, I did.
004
2016年:开始设计作品 / Start designing
在2016年左右,我开始设计一些简单的模型,同时我也对绘制 Around 2016, I started designing some simple patterns and also
折图产生了一些兴趣。半年之后,我便积累了不少的模型,也学 became interested in drawing folding steps. After six months, I
had accumulated a lot of patterns and learned to use Illustrator
会了如何使用Illustrator绘制折图。
to draw diagrams.
现在看来,这本书的制作过程并没有的那么完美。但在这个过 Looking back, the process of making this book was not as
程,我收获了真挚的友谊。直到今天,我仍然非常感谢那些愿 perfect as it could have been. But in the process, I made some
real friendships. To this day, I am very grateful to those who
意相信自己的折纸爱好者。
believed in me.
005
2020年:离开《折纸实录》/ Leaving to start again
到了2020年,
《折纸实录》实际上已经发生了很多的变化。它 In 2020, origami has changed a lot. I didn't enjoy the project as
不再像当初创办的时候那样吸引我,所以我在认真考虑了半年 much as I did at the beginning, so I decided to leave "Origami
Record" after six months of reflection.
之后,决定离开《折纸实录》。
在那半年的时间里,我把自己的制图流程总结了出来。在这个 During those six months, I tookstockof what I had produced and
过程中,我意识到自己真的画了很多的折图。于是我联系了尼 realized that I had really made a lot of diagrams. So I contacted
Nicolas TERRY and asked him if we could do a book together.
古拉斯先生。询问我们是否可以制作一本书,用于纪念我的折
Fortunately, we came to an agreement.
纸生涯。很高兴的是,我们达成了共识。
在图纸修复完成以后,我又开始学习版式设计。我想尽可能多 After fixing the diagrams, I went back to studying the layout. I
的了解一些书籍制作相关的知识,以便于我可以更好的理解自 wanted to learn as much as I could about book production so I
could better understand what I was doing.
己所做的工作。
现在,这本书完成了。我也来到了岔路口。希望我们可以一直享 Now the book is finished. I have also come to a fork in the road. I
受折纸带来的快乐。 hope we can continue to have fun with origami.
006
关于设计的看法
My Views About Design
同一个题材,看到人少我就上了,看到人多我就撤了。如果一个 When I see that there are few people working on a subject, I go
题材有很多人设计过,我就会想要不要也参与其中。如果我参 for it. But when I see that there are a lot of them, I get out. And if
a subject has been designed many times before, if I get involved,
与其中,能不能做出一些新的东西?
then it's to create something new.
请注意,我并不认同什么都还没有掌握就盲目的进行设计。 Please note that I do not agree with blindly designing before we
have mastered anything.
如果你花费了大量的时间却还是没有成果。又或者,你无法超 If you spend a lot of time and still don't get the result you want, or
越前人的设计。算了算了,换个题材再继续创作。每个人的能力 if you are not able to surpass the creations of your predecessors,
forget about this model. Change the subject and keep moving
不同,就算不能执行的话,也没必要沮丧。
forward. Everyone has different abilities. There is no need to be
frustrated if you can't get it right.
折纸这件失去如果带来了快乐,我们可以继续。照顾好自己的
生活,照顾好自己的心情,希望你可以永远享受折纸的快乐。
Get over that frustration to keep the joy in you. Take care of your
life, take care of yourself and I hope you can always enjoy the joy
that origami brings us.
007
折纸符号及 技法
Symbols and Techniques
一、基本折法 / Basic Techniques
OR
45° 01-10 To 10
放大 缩小 旋转 翻面 重复 回到
Zoom in Zoom out Rotation Turn over Repetition Return to
1 8
90° 90°
008
四、沉折 / Sink
内翻折 / Inside reverse-fold 外翻折 / Outside reverse-fold 拉出纸层 / Pull out the inner paper
花瓣折 / Petal-fold 进入透视 / Shows an X-ray view 退出透视 / Shows a normal view
009
风筝基本型 Kite Base
设计/Designer
苦茶/Kucha 05/2018
制图/Diagrams
苦茶/Kucha 10/2019
纸张大小/Paper Size
15 x 15 cm
01. Fold verticallly following the marks 02. Valley-fold along the angle bisector 03. Fold verticallly following the marks
04. Fold along the angle bisector, then unfold 05. Valley-fold along the angle bisector 06. Valley-fold following the line
07. Fold along the angle bisector, then unfold 08. Mountain-fold to the back 09. Completed!!!
011
鱼基本型 Fish Base
设计/Designer
苦茶/Kucha 05/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold following the marks, then unfold
04. Fold between marked points, then unfold 05. Fold between marked points, then unfold 06. Fold following the marks, then unfold
07. Valley-fold along the angle bisector 08. Valley-fold along the angle bisector 09. Zoom into the area
012
10. Fold through the two points, then unfold 11. Inside reverse-fold 12. Result of previous step
10-12
13. Repeat steps 10 to 12 14. Valley-fold through the two points 15. Fold along the angle bisector, then unfold
16. Inside reverse-fold 17. Valley-fold along the angle bisector 18. Push the flap inside 19. Valley-fold along the angle bisector
17-20
20. Valley-fold 21. Repeat steps 17 to 20 22. Mountain-fold to the back 23. Completed!!!
013
鹤基本型 Crane Base
设计/Designer
苦茶/Kucha 12/2019
制图/Diagrams
苦茶/Kucha 02/2021
纸张大小/Paper Size
30 x 30 cm
边界 / Border line
峰线 / Mountain line
谷线 / Valley line
014
蝴蝶结 Butterfly Knot
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Valley-fold between marked points 03. Fold along the angle bisector, then unfold
04. Fold along the angle bisector, then unfold 05. Fold between marked points, then unfold 06. Fold between marked points, then unfold
07. Fold through the two points, then unfold 08. Valley-fold following the line 09. Valley-fold following the line
015
45°
10. Valley-fold following the line 11. Pull out the inner paper 12. Zoom into the area
13. Fold verticallly following the marks 14. Fold between marked points, then unfold 15. Valley-fold
016
22. Valley-fold following the line 23. Fold following the marks, then unfold 24. Inside reverse-fold
25. Inside reverse-fold 26. Valley-fold following the line 27. Fold between marked points, then unfold
28. Push the flap inside 29. Result of previous step 30. Fold verticallly following the marks
017
31. Fold along the angle bisector, then unfold 32. Fold between marked points, then unfold 33. Valley-fold following the line
34. Open and squash-fold 35. Flip the bottom flap to the front 36. Result of previous step
30-34
37. Repeat steps 30 to 34 38. Flip the bottom flap to the front 39. Completed!!!
018
比基尼 Bikini
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Valley-fold along the angle bisector 03. Fold along the angle bisector, then unfold
04. Fold along the angle bisector, then unfold 05. Inside reverse-fold 06. Valley-fold along the angle bisector
05-06
07. Repeat steps 05 to 06 08. Fold following the marks, then unfold 09. Fold following the marks, then unfold
019
10. Valley-fold through the two points 11. Pull out the inner paper 12. Shift the inner flap to the front
45°
13. Fold between marked points, then unfold 14. Open-sink 15. Fold along the angle bisector, then unfold
16. Open and squash-fold 17. Valley-fold 18. Valley-fold along the angle bisector
16-19
19. Valley-fold following the line 20. Repeat steps 16 to 19 21. Mountain-fold to the back
020
22. Valley-fold through the two points 23. Valley-fold between marked points 24. Spread-sink
25. Result of previous step 26. Mountain-fold to the back 27. Zoom into the area
28. Mountain-fold to the back 29. Swivel-fold 30. Zoom into the area
31. Mountain-fold to the back 32. Mountain-fold to the back 33. Completed!!!
021
问号 Question Mark
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 11/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Valley-fold along the angle bisector 03. Fold between marked points, then unfold
02-04
04. Hold and pull the flap 05. Repeat steps 02 to 04 06. Valley-fold between marked points
07. Collapse using these creases 08. Fold along the angle bisector, then unfold 09. Fold then unfold by edge-to-edge
022
10. Inside reverse-fold 11. Zoom into the area 12. Fold between marked points, then unfold
13. Valley-fold 14. Valley-fold between marked points 15. Valley-fold following the line
16. Special petal-fold 17. Mountain-fold to the back 18. Fold following the marks, then unfold
19. Fold between marked points, then unfold 20. Fold following the marks, then unfold 21. Fold along the angle bisector, then unfold
023
22. Fold along the angle bisector, then unfold 23. Swivel-fold 24. Pull out the inner paper
45°
25. Zoom into the area 26. Valley-fold by edge-to-edge 27. Swivel-fold following the marks
28. Zoom into the area 29. Fold along the angle bisector, then unfold 30. Open and squash-fold
024
31. Flip the top flap to the back 32. Mountain-fold to the back 33. Valley-fold between marked points
34. Valley-fold following the marks 35. Fold along the angle bisector, then unfold 36. Valley-fold by edge-to-edge
37. Valley-fold following the line 38. Mountain-fold to the back 39. Completed!!!
025
感叹号 Exclamation Mark
设计/Designer
苦茶/Kucha 10/2020
制图/Diagrams
苦茶/Kucha 10/2020
纸张大小/Paper Size
20 x 20 cm
01. Fold between marked points, then unfold 02. Fold between marked points, then unfold 03. Fold following the marks, then unfold
04. Fold following the marks, then unfold 05. Fold following the marks, then unfold 06. Fold following the marks, then unfold
07. Zoom into the area 08. Fold along the angle bisector, then unfold 09. Fold between marked points, then unfold
026
10. Fold following the marks, then unfold 11. Fold between marked points, then unfold 12. Fold along the angle bisector, then unfold
05-12
13. Repeat steps 05 to 12 14. Fold verticallly following the marks 15. Fold between marked points, then unfold
16. Swivel-fold 17. Fold along the angle bisector, then unfold 18. Fold between marked points, then unfold
19. Open and squash-fold 20. Fold along the angle bisector, then unfold 21. Fold along the angle bisector, then unfold
027
22. Inside reverse-fold 23. Valley-fold through the two points 24. Zoom into the area
25. Swivel-fold following the marks 26. Push the flap inside 27. Swivel-fold following the marks
28. Open and squash-fold 29. Open the flap 30. Open and squash-fold
31. Zoom into the area 32. Valley-fold following the line 33. Valley-fold along the angle bisector
028
34. Flatten the model 35. Valley-fold along the angle bisector 36. Valley-fold
16-38
37. Valley-fold through the two points 38. Result of previous step 39. Repeat steps 16 to 38
40. Zoom into the area 41. Fold between marked points, then unfold 42. Fold between marked points, then unfold
43. Zoom into the area 44. Open the flap 45. Mountain-fold to the back
029
46. Flatten the model 47. Flatten the model 48. Flatten the model
49. Special petal-fold 50. Valley-fold 51. Zoom into the area
52. Fold between marked points, then unfold 53. Open-sink 54. Valley-fold following the line
51-55
030
图片图标 Picture Icon
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 03/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold between marked points, then unfold
04. Fold following the marks, then unfold 05. Fold following the marks, then unfold 06. Fold between marked points, then unfold
031
10. Zoom into the area 11. Fold through the two points, then unfold 12. Valley-fold along the angle bisector
13. Pull out the inner paper 14. Open and squash-fold 15. Pull out the inner paper
16. Result of previous step 17. Swivel-fold following the marks 18. Fold between marked points, then unfold
17-19
032
22. Fold between marked points, then unfold 23. Fold between marked points, then unfold 24. Inside reverse-fold
135°
25. Inside reverse-fold 26. Valley-fold through the two points 27. Rabbit-ear fold
30. Pull out the inner paper 31. Fold along the angle bisector, then unfold
033
32. Fold along the angle bisector, then unfold 33. Special rabbit-ear fold
34. Pull out the inner paper 35. Open and squash-fold 36. Pull out the inner paper
37. Fold between marked points, then unfold 38. Valley-fold along the angle bisector 39. Mountain-fold to the back
034
40. Valley-fold through the two points 41. Zoom into the area 42. Fold following the marks, then unfold
43. Inside reverse-fold 44. Valley-fold 45. Valley-fold between marked points
46. Mountain-fold to the back 47. Mountain-fold to the back 48. Result of previous step
49. Valley-fold between marked points 50. Valley-fold through the two points 51. Completed!!!
035
可回收物 Recyclable
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 01/2018
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold along the angle bisector, then unfold
04. Fold between marked points, then unfold 05. Fold following the marks, then unfold 06. Fold along the angle bisector, then unfold
07. Zoom into the area 08. Fold following the marks, then unfold 09. Fold along the angle bisector, then unfold
036
10. Valley-fold between marked points 11. Valley-fold following the line 12. Fold between marked points, then unfold
13. Fold following the marks, then unfold 14. Valley-fold between marked points 15. Swivel-fold
16. Flip the top flap to the back 17. Open and squash-fold 18. Zoom into the area
19. Fold along the angle bisector, then unfold 20. Inside reverse-fold 21. Valley-fold
037
22. Swivel-fold 23. Fold between marked points, then unfold 24. Fold following the marks, then unfold
25. Fold along the angle bisector, then unfold 26. Fold between marked points, then unfold 27. Fold verticallly following the marks
28. Fold following the marks, then unfold 29. Swivel-fold 30. Open and squash-fold
31. Special petal-fold 32. Open and squash-fold 33. Fold along the angle bisector, then unfold
038
34. Inside reverse-fold 35. Push the flap inside 36. Fold along the angle bisector, then unfold
37. Valley-fold along the angle bisector 38. Open the flap 39. Mountain-fold to the back
40. Flatten the model 41. Valley-fold between marked points 42. Pull out the inner paper
43. Shift the inner flap to the front 44. Pull out the inner paper 45. Valley-fold following the line
039
46. Valley-fold between marked points 47. Inside reverse-fold 48. Collapse using these creases
49. Zoom into the area 50. Valley-fold through the two points 51. Valley-fold along the angle bisector
52. Pull out the inner paper 53. Valley-fold 54. Push the flap inside
55. Zoom into the area 56. Mountain-fold to the back 57. Completed!!!
040
节约用水 Save Water
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 01/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold along the angle bisector, then unfold
04. Fold along the angle bisector, then unfold 05. Fold along the angle bisector, then unfold 06. Fold following the marks, then unfold
07. Fold along the angle bisector, then unfold 08. Fold following the marks, then unfold 09. Rabbit-ear fold
041
10. Fold verticallly following the marks 11. Inside reverse-fold 12. Fold along the angle bisector, then unfold
13. Inside reverse-fold 14. Push the flap inside 15. Valley-fold
16. Push the flap inside 17. Petal-fold 18. Valley-fold between marked points
19. Pull out the inner paper 20. Valley-fold following the line 21. Open and squash-fold
042
45°
22. Pull out the inner paper 23. Valley-fold following the line 24. Flatten the model
25. Valley-fold through the two points 26. Flip the top flap to the back 27. Valley-fold following the line
28. Zoom into the area 29. Pull out the inner paper 30. Fold following the marks, then unfold
31. Fold along the angle bisector, then unfold 32. Outside crimp 33. Pull out the inner paper
043
34. Valley-fold 35. Valley-fold 36. Valley-fold between marked points
37. Valley-fold between marked points 38. Fold verticallly following the marks 39. Zoom into the area
40. Fold along the angle bisector, then unfold 41. Open and squash-fold 42. Zoom into the area
044
43. Fold along the angle bisector, then unfold 44. Fold along the angle bisector, then unfold 45. Special petal-fold
46. Flip the top flap to the back 47. Valley-fold between marked points 48. Mountain-fold to the back
49. Mountain-fold to the back 50. Mountain-fold to the back 51. Completed!!!
045
节约用电 Save Electricity
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold along the angle bisector, then unfold 05. Valley-fold following the line 06. Fold along the angle bisector, then unfold
90°
046
09. Result of previous step 10. Fold along the angle bisector, then unfold 11. Open and squash-fold
12. Fold between marked points, then unfold 13. Fold along the angle bisector, then unfold 14. Inside reverse-fold
12-14
15. Repeat steps 12 to 14 16. Special petal-fold 17. Zoom into the area
047
18. Valley-fold between marked points 19. Valley-fold following the marks 20. Flip the top flap to the back
21. Fold along the angle bisector, then unfold 22. Mountain-fold to the back 23. Fold through the two points, then unfold
24. Fold between marked points, then unfold 25. Fold between marked points, then unfold 26. Fold between marked points, then unfold
048
1
2
1
2
27. Pleat-fold 28. Pleat-fold 29. Pleat-fold
30. Pleat-fold 31. Result of previous step 32. Zoom into the area
31-34
33. Open and squash-fold 34. Open and squash-fold 35. Repeat steps 31 to 34
049
36. Valley-fold between marked points 37. Fold along the angle bisector, then unfold 38. Valley-fold along the angle bisector
39. Valley-fold following the marks 40. Fold between marked points, then unfold 41. Fold along the angle bisector, then unfold
42. Special rabbit-ear fold 43. Mountain-fold to the back 44. Completed!!!
050
囧 Embarrassment
设计/Designer
苦茶/Kucha 10/2020
制图/Diagrams
苦茶/Kucha 02/2021
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold along the angle bisector, then unfold
04. Fold between marked points, then unfold 05. Fold between marked points, then unfold 06. Fold following the marks, then unfold
07. Fold following the marks, then unfold 08. Fold between marked points, then unfold 09. Fold through the two points, then unfold
051
10. Valley-fold between marked points 11. Fold between marked points, then unfold 12. Fold following the marks, then unfold
13. Valley-fold through the two points 14. Swivel-fold 15. Fold between marked points, then unfold
16. Open-sink 17. Swivel-fold following the marks 18. Fold between marked points, then unfold
17-18
19. Repeat steps 17 to 18 20. Zoom into the area 21. Fold along the angle bisector, then unfold
052
22. Fold along the angle bisector, then unfold 23. Fold following the marks, then unfold 24. Fold between marked points, then unfold
25. Fold following the marks, then unfold 26. Fold between marked points, then unfold 27. Fold along the angle bisector, then unfold
28. Fold along the angle bisector, then unfold 29. Fold following the marks, then unfold 30. Fold between marked points, then unfold
31. Fold following the marks, then unfold 32. Fold between marked points, then unfold 33. Fold following the marks, then unfold
053
34. Mountain-fold to the back 35. Open and squash-fold 36. Inside reverse-fold
45°
35-36
37. Repeat steps 35 to 36 38. Zoom into the area 39. Fold along the angle bisector, then unfold
40. Fold verticallly following the marks 41. Open and squash-fold 42. Valley-fold following the line
45°
39-43
43. Inside reverse-fold 44. Repeat steps 39 to 43 45. Result of previous step
054
45°
46. Fold following the marks, then unfold 47. Special rabbit-ear fold 48. Mountain-fold to the back
49. Valley-fold 50. Valley-fold following the line 51. Fold along the angle bisector, then unfold
52. Open the flap 53. Flatten the model 54. Collapse using these creases
055
55. Valley-fold following the line 56. Result of previous step 57. Valley-fold following the line
58. Valley-fold following the line 59. Valley-fold following the line 60. Valley-fold following the line
61. Zoom into the area 62. Fold through the two points, then unfold 63. Mountain-fold to the back
056
64. Fold between marked points, then unfold 65. Swivel-fold following the marks 66. Inside reverse-fold
62-68
67. Flip the top flap to the back 68. Result of previous step 69. Repeat steps 62 to 68
70. Fold through the two points, then unfold 71. Mountain-fold to the back 72. Completed!!!
057
复选框 CheckBox
设计/Designer
苦茶/Kucha 09/2021
制图/Diagrams
苦茶/Kucha 02/2022
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold following the marks, then unfold
04. Fold along the angle bisector, then unfold 05. Fold following the marks, then unfold 06. Fold along the angle bisector, then unfold
07. Fold following the marks, then unfold 08. Fold between marked points, then unfold 09. Fold following the marks, then unfold
058
10. Fold following the marks, then unfold 11. Fold between marked points, then unfold 12. Fold between marked points, then unfold
13. Fold through the two points, then unfold 14. Fold between marked points, then unfold 15. Valley-fold between marked points
16. Valley-fold between marked points 17. Valley-fold following the line 18. Fold along the angle bisector, then unfold
19. Inside reverse-fold 20. Valley-fold following the line 21. Swivel-fold following the marks
059
22. Flip the top flap to the back 23. Flatten the model 24. Flatten the model
25. Inside reverse-fold 26. Valley-fold through the two points 27. Swivel-fold following the marks
28. Flatten the model 29. Flatten the model 30. Pull out the inner paper
31. Valley-fold along the angle bisector 32. Pull out the inner paper 33. Pull out the inner paper
060
34. Valley-fold following the line 35. Push the flap inside 36. Mountain-fold to the back
37. Valley-fold following the line 38. Open and squash-fold 39. Shift the inner flap to the front
40. Flip the bottom flap to the front 41. Zoom into the area 42. Fold along the angle bisector, then unfold
43. Valley-fold between marked points 44. Pull out the inner paper 45. Pull out the inner paper
061
46. Valley-fold along the angle bisector 47. Pull out the inner paper 48. Swivel-fold following the marks
49. Result of previous step 50. Fold between marked points, then unfold 51. Zoom into the area
52. Fold along the angle bisector, then unfold 53. Shift the inner flap to the front 54. Valley-fold following the line
55. Next step shows an X-ray view 56. Valley-fold following the line 57. Pull out the inner paper
062
58. Next step shows a normal view 59. Mountain-fold to the back 60. Flatten the model
61. Zoom into the area 62. Fold along the angle bisector, then unfold 63. Inside reverse-fold
64. Fold following the marks, then unfold 65. Push the flap inside 66. Result of previous step
67. Zoom into the area 68. Fold along the angle bisector, then unfold 69. Inside reverse-fold
063
70. Fold following the marks, then unfold 71. Push the flap inside
064
点赞 Like Button
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 01/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold between marked points, then unfold
04. Valley-fold along the angle bisector 05. Valley-fold between marked points 06. Fold between marked points, then unfold
To 04
07. Return to the step 04 08. Valley-fold between marked points 09. Fold along the angle bisector, then unfold
065
10. Zoom into the area 11. Fold between marked points, then unfold 12. Valley-fold along the angle bisector
13. Valley-fold along the angle bisector 14. Result of previous step 15. Rabbit-ear fold to the back
135°
16. Special petal-fold 17. Flatten the model 18. Result of previous step
19. Fold verticallly following the marks 20. Flip the bottom flap to the front 21. Swivel-fold following the marks
066
22. Valley-fold between marked points 23. Valley-fold along the angle bisector 24. Valley-fold along the angle bisector
25. Zoom into the area 26. Valley-fold along the angle bisector 27. Result of previous step
28. Valley-fold 29. Zoom into the area 30. Fold between marked points, then unfold
31. Mountain-fold to the back 32. Result of previous step 33. Valley-fold following the line
067
34. Shift the inner flap to the front 35. Flip the bottom flap to the front 36. Collapse using these creases
37. Fold along the angle bisector, then unfold 38. Fold following the marks, then unfold 39. Swivel-fold following the marks
40. Valley-fold between marked points 41. Valley-fold through the two points 42. Valley-fold
068
43. Open and squash-fold 44. Valley-fold following the line 45. Open and squash-fold
46. Swivel-fold following the marks 47. Zoom into the area 48. Fold verticallly following the marks
49. Result of previous step 50. Valley-fold between marked points 51. Zoom into the area
069
52. Fold following the marks, then unfold 53. Inside reverse-fold 54. Result of previous step
55. Zoom into the area 56. Fold along the angle bisector, then unfold 57. Valley-fold along the angle bisector
45°
58. Result of previous step 59. Valley-fold through the two points 60. Result of previous step
61. Zoom into the area 62. Flip the top flap to the back 63. Result of previous step
070
64. Shift the inner flap to the front 65. Zoom into the area 66. Swivel-fold following the marks
67. Mountain-fold to the back 68. Mountain-fold to the back 69. Result of previous step
70. Valley-fold along the angle bisector 71. Mountain-fold to the back 72. Completed!!!
071
鲁宾之杯 Rubin's Vase
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold along the angle bisector, then unfold 05. Fold along the angle bisector, then unfold 06. Valley-fold following the line
07. Inside reverse-fold 08. Valley-fold following the line 09. Fold following the marks, then unfold
072
10. Fold along the angle bisector, then unfold 11. Inside reverse-fold
135°
073
18. Open the flap 19. Flatten the model
22. Result of previous step 23. Fold between marked points, then unfold
180°
074
25. Flatten the model 26. Fold following the marks, then unfold
29. Pull out the inner paper 30. Pull out the inner paper 31. Swivel-fold following the marks
32. Fold along the angle bisector, then unfold 33. Swivel-fold 34. Valley-fold between marked points
075
35. Valley-fold along the angle bisector 36. Mountain-fold to the back 37. Valley-fold
38. Fold along the angle bisector, then unfold 39. Open and squash-fold 40. Fold between marked points, then unfold
41. Open-sink 42. Fold between marked points, then unfold 43. Mountain-fold to the back
44. Valley-fold 45. Fold along the angle bisector, then unfold 46. Inside reverse-fold
076
47. Valley-fold through the two points 48. Fold between marked points, then unfold 49. Inside reverse-fold
50. Zoom into the area 51. Fold between marked points, then unfold 52. Fold following the marks, then unfold
28-53
53. Mountain-fold to the back 54. Repeat steps 28 to 53 55. Zoom into the area
56. Valley-fold along the angle bisector 57. Pull out the inner paper 58. Fold along the angle bisector, then unfold
077
59. Open and squash-fold 60. Shift the outer flap behind
55-64
078
领带衬衫 Shirt With Tie
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 05/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold following the marks, then unfold
04. Fold between marked points, then unfold 05. Valley-fold following the line 06. Fold between marked points, then unfold
45°
07. Collapse using these creases 08. Fold verticallly following the marks 09. Open-sink
079
10. Fold following the marks, then unfold 11. Open-sink 12. Fold between marked points, then unfold
13. Fold along the angle bisector, then unfold 14. Fold between marked points, then unfold 15. Zoom into the area
080
16. Fold following the marks, then unfold 17. Fold through the two points, then unfold 18. Open and squash-fold
16-18
19. Repeat steps 16 to 18 20. Fold along the angle bisector, then unfold 21. Mountain-fold to the back
22. Fold through the two points, then unfold 23. Push the flap inside 24. Flatten the model
081
25. Special petal-fold 26. Zoom into the area 27. Valley-fold
28. Fold along the angle bisector, 29. Fold along the angle bisector, 30. Swivel-fold 31. Flip the top flap to the back
then unfold then unfold
32. Inside reverse-fold 33. Valley-fold 34. Swivel-fold following the marks 35. Flip the top flap to the back
082
26-36
36. Valley-fold following the line 37. Repeat steps 26 to 36 38. Fold between marked points, then unfold
39. Fold along the angle bisector, then unfold 40. Collapse using these creases 41. Fold following the marks, then unfold
42. Valley-fold following the line 43. Swivel-fold 44. Valley-fold following the line
45°
45°
45. Result of previous step 46. Closed-sink 47. Hold and pull the flap
083
48. Zoom into the area 49. Valley-fold between marked points 50. Pull out the inner paper
51. Swivel-fold 52. Pull out the inner paper 53. Fold verticallly following the marks
54. Fold along the angle bisector, then unfold 55. Inside reverse-fold 56. Valley-fold along the angle bisector
57. Valley-fold following the line 58. Mountain-fold to the back 59. Valley-fold through the two points
60. Flatten the model 61. Fold following the marks, then unfold 62. Outside reverse-fold
084
63. Flip the top flap to the back 64. Zoom into the area 65. Push the flap inside
61-65
66. Repeat steps 61 to 65 67. Shift the inner flap to the front 68. Zoom into the area
69. Valley-fold following the marks 70. Swivel-fold following the marks 71. Mountain-fold to the back
70-71
72. Repeat steps 70 to 71 73. Shift the outer flap behind 74. Completed!!!
085
6x6棋盘 6x6 Chessboard
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
30 x 30 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold following the marks, then unfold
04. Fold between marked points, then unfold 05. Fold between marked points, then unfold 06. Fold between marked points, then unfold
07. Fold following the marks, then unfold 08. Fold through the two points, then unfold 09. Fold through the two points, then unfold
086
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold 12. Fold between marked points, then unfold
13. Collapse using these creases 14. Open and squash-fold 15. Valley-fold following the line
16. Pull out the inner paper 17. Open and squash-fold 18. Pull out the inner paper
19. Fold along the angle bisector, then unfold 20. Open-sink 21. Open and squash-fold
087
22. Open-sink 23. Inside reverse-fold 24. Open-sink
25. Open and squash-fold 26. Valley-fold following the line 27. Pull out the inner paper
28. Pull out the inner paper 29. Open-sink 30. Fold along the angle bisector, then unfold
088
34. Open-sink 35. Zoom into the area 36. Valley-fold between marked points
37. Valley-fold between marked points 38. Valley-fold between marked points 39. Swivel-fold following the marks
37-41
40. Valley-fold through the two points 41. Valley-fold through the two points 42. Repeat steps 37 to 41
089
43. Result of previous step 44. Zoom into the area 45. Valley-fold following the line
46. Valley-fold following the line 47. Valley-fold following the line 48. Valley-fold following the line
49. Valley-fold following the line 50. Valley-fold following the line 51. Valley-fold between marked points
090
52. Valley-fold between marked points 53. Swivel-fold following the marks 54. Valley-fold through the two points
51-55
55. Valley-fold through the two points 56. Repeat steps 51 to 55 57. Result of previous step
36-43 45-57
091
拳头紧握 Clench Fist
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold following the marks, then unfold
04. Fold between marked points, then unfold 05. Fold between marked points, then unfold 06. Fold between marked points, then unfold
07. Fold between marked points, then unfold 08. Fold between marked points, then unfold 09. Fold along the angle bisector, then unfold
092
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold 12. Fold through the two points, then unfold
13. Fold following the marks, then unfold 14. Mountain-fold to the back 15. Fold between marked points, then unfold
16. Fold between marked points, then unfold 17. Pull out the inner paper 18. Fold between marked points, then unfold
19. Fold along the angle bisector, then unfold 20. Fold following the marks, then unfold 21. Fold along the angle bisector, then unfold
093
22. Fold through the two points, then unfold 23. Collapse using these creases
28. Pull out the inner paper 29. Pull out the inner paper
094
30. Valley-fold following the line 31. Swivel-fold following the marks
34. Swivel-fold following the marks 35. Pull out the inner paper
095
38. Valley-fold 39. Open and squash-fold
40. Swivel-fold following the marks 41. Zoom into the area
42. Flip the top flap to the back 43. Fold verticallly following the marks 44. Inside reverse-fold
45. Mountain-fold to the back 46. Fold along the angle bisector, then unfold
096
47. Valley-fold along the angle bisector 48. Mountain-fold to the back
097
55. Result of previous step 56. Zoom into the area
57. Valley-fold through the two points 58. Fold between marked points, then unfold 59. Mountain-fold to the back
60. Swivel-fold following the marks 61. Open and squash-fold 62. Shift the outer flap behind
63. Fold verticallly following the marks 64. Zoom into the area 65. Inside reverse-fold
098
66. Zoom into the area 67. Mountain-fold to the back 68. Mountain-fold to the back
71. Completed!!!
099
对角线折 Fold Diagonal
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
45 x 45 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold between marked points, then unfold 05. Fold through the two points, then unfold 06. Fold between marked points, then unfold
07. Fold between marked points, then unfold 08. Fold between marked points, then unfold 09. Fold between marked points, then unfold
100
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold
12. Fold between marked points, then unfold 13. Fold between marked points, then unfold
14. Valley-fold between marked points 15. Valley-fold between marked points
101
135°
16. Valley-fold between marked points 17. Zoom into the area 18. Valley-fold along the angle bisector
19. Pull out the inner paper 20. Fold between marked points, then unfold 21. Fold between marked points, then unfold
22. Fold between marked points, then unfold 23. Fold between marked points, then unfold 24. Fold between marked points, then unfold
25. Flatten the model 26. Fold between marked points, then unfold 27. Flatten the model
102
28. Zoom into the area 29. Open and squash-fold
103
29-34
36. Valley-fold following the line 37. Zoom into the area
104
38-39
43-44
105
46. Result of previous step 47. Collapse using these creases
48. Fold between marked points, then unfold 49. Fold between marked points, then unfold
50. Fold between marked points, then unfold 51. Fold between marked points, then unfold
106
29-34
52-54
38-39
107
38-39
43-44
38-39
38-41
57-59
62. Result of previous step 63. Pull out the inner paper
108
64. Valley-fold following the line 65. Valley-fold between marked points
135°
109
68. Valley-fold between marked points 69. Valley-fold following the line
70. Swivel-fold following the marks 71. Flip the top flap to the back
110
74. Mountain-fold to the back 75. Zoom into the area
76-77
76. Pull out the inner paper 77. Valley-fold along the angle bisector 78. Repeat steps 76 to 77
111
24小时 24 Hours
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 08/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold along the angle bisector, then unfold 05. Fold between marked points, then unfold 06. Fold along the angle bisector, then unfold
07. Fold following the marks, then unfold 08. Fold following the marks, then unfold 09. Fold following the marks, then unfold
112
10. Fold between marked points, then unfold 11. Valley-fold between marked points 12. Valley-fold following the marks
13. Valley-fold along the angle bisector 14. Valley-fold following the line 15. Fold along the angle bisector, then unfold
16. Inside reverse-fold 17. Open the flap 18. Flatten the model
19. Swivel-fold following the marks 20. Flatten the model 21. Fold along the angle bisector, then unfold
113
22. Valley-fold 23. Fold between marked points, then unfold 24. Fold between marked points, then unfold
25. Fold between marked points, then unfold 26. Fold following the marks, then unfold 27. Fold along the angle bisector, then unfold
28. Inside reverse-fold 29. Push the flap inside 30. Valley-fold along the angle bisector
31. Pull out the inner paper 32. Swivel-fold following the marks 33. Flatten the model
114
34. Valley-fold along the angle bisector 35. Fold following the marks, then unfold
36. Zoom into the area 37. Push the flap inside
115
40. Fold between marked points, then unfold 41. Fold between marked points, then unfold 42. Fold along the angle bisector, then unfold
43. Fold following the marks, then unfold 44. Inside reverse-fold 45. Swivel-fold
46. Valley-fold along the angle bisector 47. Swivel-fold along the angle bisector 48. Pull out the inner paper
116
49. Pull out the inner paper 50. Valley-fold following the marks 51. Swivel-fold following the marks
52. Swivel-fold following the marks 53. Valley-fold along the angle bisector 54. Flip the top flap to the back
55. Valley-fold following the marks 56. Mountain-fold to the back 57. Result of previous step
117
58. Shift the inner flap to the front 59. Valley-fold along the angle bisector 60. Fold through the two points, then unfold
61. Fold between marked points, then unfold 62. Fold between marked points, then unfold 63. Valley-fold
64. Fold following the marks, then unfold 65. Swivel-fold 66. Inside reverse-fold
67. Mountain-fold to the back 68. Mountain-fold to the back 69. Zoom into the area
118
70. Open the flap 71. Flatten the model 72. Valley-fold along the angle bisector
73. Valley-fold following the marks 74. Fold through the two points, then unfold 75. Special rabbit-ear fold
76. Next step shows an X-ray view 77. Valley-fold between marked points 78. Pull out the inner paper
79. Valley-fold along the angle bisector 80. Mountain-fold to the back 81. Shift the inner flap to the front
119
82. Next step shows a normal view 83. Swivel-fold following the marks 84. Open and squash-fold
85. Pull out the inner paper 86. Flip the top flap to the back 87. Fold following the marks, then unfold
88. Inside reverse-fold 89. Fold through the two points, then unfold 90. Flip the bottom flap to the front
91. Closed-sink 92. Fold along the angle bisector, then unfold 93. Inside crimp
120
94. Valley-fold 95. Pull out the inner paper 96. Open and squash-fold
97. Zoom into the area 98. Mountain-fold to the back 99. Mountain-fold to the back
100. Shift the inner flap to the front 101. Open and squash-fold
121
镰刀和锤子 Hammer and Sickles
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 02/2021
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold through the two points, then unfold 05. Fold following the marks, then unfold 06. Fold between marked points, then unfold
90°
07. Fold following the marks, then unfold 08. Fold between marked points, then unfold 09. Fold following the marks, then unfold
122
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold 12. Fold following the marks, then unfold
13. Fold following the marks, then unfold 14. Fold between marked points, then unfold 15. Valley-fold along the angle bisector
16. Fold following the marks, then unfold 17. Rabbit-ear fold 18. Pull out the inner paper
19. Valley-fold following the line 20. Pull out the inner paper 21. Zoom into the area
123
22. Fold along the angle bisector, then unfold 23. Inside crimp 24. Swivel-fold along the angle bisector
24-27
28. Valley-fold following the line 29. Repeat steps 24 to 27 30. Collapse using these creases
31. Fold between marked points, then unfold 32. Fold along the angle bisector, then unfold 33. Valley-fold following the marks
124
34. Valley-fold through the two points 35. Valley-fold following the line 36. Fold along the angle bisector, then unfold
37. Valley-fold along the angle bisector 38. Swivel-fold following the marks 39. Shift the outer flap behind
40. Fold following the marks, then unfold 41. Inside reverse-fold 42. Valley-fold following the marks
43. Pull out the inner paper 44. Flatten the model
125
36-46
45. Fold through the two points, then unfold 46. Swivel-fold along the angle bisector 47. Repeat steps 36 to 46
48. Valley-fold following the marks 49. Open and squash-fold 50. Zoom into the area
51. Fold along the angle bisector, then unfold 52. Valley-fold between marked points 53. Valley-fold following the line
90°
54. Mountain-fold to the back 55. Mountain-fold to the back 56. Result of previous step
126
57. Zoom into the area 58. Valley-fold following the marks 59. Valley-fold along the angle bisector
60. Swivel-fold following the marks 61. Fold following the marks, then unfold 62. Swivel-fold following the marks
63. Mountain-fold to the back 64. Result of previous step 65. Zoom into the area
66. Fold following the marks, then unfold 67. Mountain-fold to the back 68. Valley-fold following the marks
127
69. Valley-fold along the angle bisector 70. Swivel-fold following the marks 71. Valley-fold between marked points
72. Valley-fold along the angle bisector 73. Swivel-fold following the marks 74. Result of previous step
75. Completed!!!
128
70周年 70th Anniversary
设计/Designer
苦茶/Kucha 09/2019
制图/Diagrams
贝茜/Bessie 09/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold along the angle bisector, then unfold
04. Rabbit-ear fold 05. Fold between marked points, then unfold 06. Fold verticallly following the marks
07. Open and squash-fold 08. Valley-fold through the two points 09. Pull out the inner paper
129
45°
10. Valley-fold 11. Zoom into the area 12. Fold between marked points, then unfold
13. Valley-fold between marked points 14. Valley-fold following the line 15. Fold then unfold
16. Inside reverse-fold 17. Valley-fold following the line 18. Zoom into the area
19. Fold along the angle bisector, then unfold 20. Inside reverse-fold 21. Valley-fold
130
22. Open and squash-fold 23. Mountain-fold to the back 24. Zoom into the area
25. Fold following the marks, then unfold 26. Inside reverse-fold 27. Open and squash-fold
45°
28. Swivel-fold following the marks 29. Valley-fold 30. Mountain-fold to the back
31. Fold along the angle bisector, then unfold 32. Fold along the angle bisector, then unfold 33. Open and squash-fold
131
45°
34. Valley-fold following the line 35. Valley-fold between marked points 36. Fold verticallly following the marks
37. Pull out the inner paper 38. Swivel-fold following the marks 39. Pull out the inner paper
40. Fold following the marks, then unfold 41. Open the flap 42. Collapse using these creases
132
43. Zoom into the area 44. Fold following the marks, then unfold 45. Fold along the angle bisector, then unfold
46. Open and squash-fold 47. Swivel-fold following the marks 48. Mountain-fold to the back
52. Valley-fold along the angle bisector 53. Fold along the angle bisector, then unfold 54. Fold between marked points, then unfold
133
55. Inside reverse-fold 56. Valley-fold 57. Swivel-fold along the angle bisector
58. Inside reverse-fold 59. Valley-fold 60. Pull out the inner paper
61. Swivel-fold along the angle bisector 62. Fold along the angle bisector, then unfold 63. Inside reverse-fold
52-56
64. Valley-fold along the angle bisector 65. Valley-fold 66. Repeat steps 52 to 56
134
67. Zoom into the area 68. Fold through the two points, then unfold
69. Inside reverse-fold 70. Fold along the angle bisector, then unfold
135
财神爷 God of Wealth
设计/Designer
苦茶/Kucha 02/2019
制图/Diagrams
苦茶/Kucha 02/2019
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold following the marks, then unfold 03. Fold along the angle bisector, then unfold
04. Fold through the two points, then unfold 05. Fold following the marks, then unfold 06. Fold following the marks, then unfold
07. Fold following the marks, then unfold 08. Fold following the marks, then unfold 09. Fold between marked points, then unfold
136
10. Fold following the marks, then unfold 11. Fold along the angle bisector, then unfold 12. Fold between marked points, then unfold
12-13
13. Fold between marked points, then unfold 14. Repeat steps 12 to 13 15. Fold following the marks, then unfold
45°
16. Fold along the angle bisector, then unfold 17. Collapse using these creases 18. Zoom into the area
19. Fold between marked points, then unfold 20. Valley-fold between marked points 21. Valley-fold following the line
137
22. Mountain-fold to the back 23. Open and squash-fold 24. Open and squash-fold
25. Pull out the inner paper 26. Result of previous step 27. Fold along the angle bisector, then unfold
28. Inside reverse-fold 29. Valley-fold through the two points 30. Valley-fold following the marks
31. Zoom into the area 32. Fold between marked points, then unfold 33. Mountain-fold to the back
138
34. Fold between marked points, then unfold 35. Fold between marked points, then unfold 36. Pleat-fold
39. Mountain-fold to the back 40. Fold following the marks, then unfold 41. Open-sink
45°
42. Zoom into the area 43. Fold between marked points, then unfold 44. Outside reverse-fold
139
45°
45. Outside reverse-fold 46. Result of previous step 47. Open and squash-fold
48. Zoom into the area 49. Valley-fold along the angle bisector 50. Mountain-fold to the back
51. Valley-fold following the marks 52. Zoom into the area 53. Swivel-fold following the marks
54. Valley-fold 55. Result of previous step 56. Valley-fold following the line
140
42-56
57. Repeat steps 42 to 56 58. Shift the inner flap to the front
141
牛年红包 Lucky Money
设计/Designer
苦茶/Kucha 01/2021
制图/Diagrams
苦茶/Kucha 01/2021
纸张大小/Paper Size
20 x 20 cm
01. Fold along the angle bisector, then unfold 02. Fold along the angle bisector, then unfold 03. Fold between marked points, then unfold
04. Fold between marked points, then unfold 05. Fold along the angle bisector, then unfold 06. Fold between marked points, then unfold
07. Fold following the marks, then unfold 08. Fold between marked points, then unfold 09. Fold between marked points, then unfold
142
10. Valley-fold through the two points 11. Open and squash-fold 12. Swivel-fold following the marks
13. Zoom into the area 14. Fold through the two points, then unfold 15. Valley-fold along the angle bisector
16. Push the flap inside 17. Valley-fold through the two points 18. Result of previous step
11-18
19. Repeat steps 11 to 18 20. Pull out the inner paper 21. Open and squash-fold
143
45°
22. Zoom into the area 23. Fold along the angle bisector, then unfold 24. Inside reverse-fold
25-26
25. Valley-fold following the line 26. Special rabbit-ear fold 27. Repeat steps 25 to 26
28. Fold through the two points, then unfold 29. Open-sink 30. Valley-fold through the two points
144
34-35
34. Valley-fold along the angle bisector 35. Valley-fold 36. Repeat steps 34 to 35
37. Fold through the two points, then unfold 38. Collapse using these creases 39. Zoom into the area
40. Mountain-fold to the back 41. Fold through the two points, then unfold 42. Valley-fold following the marks
45°
43. Valley-fold following the marks 44. Open-sink 45. Result of previous step
145
45°
46. Zoom into the area 47. Pull out the inner paper 48. Fold along the angle bisector, then unfold
49. Inside reverse-fold 50. Valley-fold through the two points 51. Closed-sink
52. Fold between marked points, then unfold 53. Valley-fold following the line 54. Inside reverse-fold
47-54
45°
55. Repeat steps 47 to 54 56. Zoom into the area 57. Mountain-fold to the back
146
58. Fold between marked points, then unfold 59. Valley-fold along the angle bisector
60. Fold along the angle bisector, then unfold 61. Rabbit-ear fold
45°
147
牛年红包3.0 Lucky Money 3.0
设计/Designer
苦茶/Kucha 01/2021
制图/Diagrams
苦茶/Kucha 01/2021
纸张大小/Paper Size
20 x 20 cm
边界 / Border line
峰线 / Mountain line
谷线 / Valley line
148
锦鲤 Koi Fish
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 05/2019
纸张大小/Paper Size
45 x 45 cm
01. Fold along the angle bisector, then unfold 02. Fold following the marks, then unfold 03. Fold between marked points, then unfold
04. Fold along the angle bisector, then unfold 05. Fold along the angle bisector, then unfold 06. Fold along the angle bisector, then unfold
07. Mountain-fold to the back 08. Fold along the angle bisector, then unfold 09. Inside reverse-fold
149
10-11
10. Swivel-fold along the angle bisector 11. Special rabbit-ear fold 12. Repeat steps 10 to 11
90°
13. Outside reverse-fold 14. Valley-fold between marked points 15. Pull out the inner paper
14-17
16. Swivel-fold following the marks 17. Valley-fold through the two points 18. Repeat steps 14 to 17
19. Swivel-fold 20. Pull out the inner paper 21. Mountain-fold to the back
150
22. Open the flap 23. Zoom into the area 24. Spread-sink
19-26
25. Result of previous step 26. Flatten the model 27. Repeat steps 19 to 26
28. Fold along the angle bisector, then unfold 29. Fold verticallly following the marks 30. Valley-fold along the angle bisector
31. Zoom into the area 32. Fold along the angle bisector, then unfold 33. Fold following the marks, then unfold
151
34. Fold through the two points, then unfold 35. Inside crimp 36. Swivel-fold following the marks
39. Shift the inner flap to the front 40. Fold verticallly following the marks
41. Pull out the inner paper 42. Zoom into the area
152
43. Fold following the marks, then unfold 44. Swivel-fold along the angle bisector 45. Flip the top flap to the back
46. Valley-fold along the angle bisector 47. Mountain-fold to the back
40-48
153
52. Valley-fold 53. Valley-fold
54. Zoom into the area 55. Fold along the angle bisector, then unfold
56. Open and squash-fold 57. Fold between marked points, then unfold 58. Open-sink
59. Inside reverse-fold 60. Valley-fold between marked points 61. Swivel-fold following the marks
154
62. Swivel-fold following the marks 63. Fold between marked points, then unfold 64. Mountain-fold to the back
65. Zoom into the area 66. Valley-fold following the marks 67. Open and squash-fold
65-69
68. Swivel-fold following the marks 69. Valley-fold through the two points 70. Repeat steps 65 to 69
71. Result of previous step 72. Rabbit-ear fold 73. Fold following the marks, then unfold
155
74. Valley-fold between marked points 75. Valley-fold following the line 76. Valley-fold between marked points
77. Result of previous step 78. Fold following the marks, then unfold
78-80
79. Swivel-fold along the angle bisector 80. Mountain-fold to the back.
Repeat steps 78 to 80 behind.
30°
156
禁止吸烟 No Smoking
设计/Designer
苦茶/Kucha xx/2018
制图/Diagrams
苦茶/Kucha 12/2019
纸张大小/Paper Size
45 x 45 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold following the marks, then unfold 05. Fold between marked points, then unfold 06. Fold along the angle bisector, then unfold
07. Fold between marked points, then unfold 08. Fold along the angle bisector, then unfold 09. Fold between marked points, then unfold
157
10. Fold between marked points, then unfold 11. Fold along the angle bisector, then unfold 12. Fold along the angle bisector, then unfold
13. Fold between marked points, then unfold 14. Fold between marked points, then unfold 15. Fold between marked points, then unfold
12-15
16. Repeat steps 12 to 15 17. Fold between marked points, then unfold 18. Fold between marked points, then unfold
19. Fold through the two points, then unfold 20. Rabbit-ear fold to the back 21. Rabbit-ear fold to the back
158
22. Valley-fold following the line 23. Swivel-fold following the marks 24. Swivel-fold following the marks
25. Hold and pull the flap 26. Valley-fold through the two points 27. Open-sink
28. Valley-fold through the two points 29. Open-sink 30. Fold verticallly following the marks
159
31. Swivel-fold following the marks 32. Swivel-fold following the marks 33. Zoom into the area
34. Hold and pull the flap 35. Valley-fold through the two points 36. Open-sink
37. Fold verticallly following the marks 38. Open and squash-fold 39. Mountain-fold to the back
40. Inside reverse-fold 41. Open and squash-fold 42. Mountain-fold to the back
160
43. Open and squash-fold 44. Zoom into the area 45. Fold through the two points, then unfold
46. Fold along the angle bisector, then unfold 47. Inside reverse-fold 48. Next step shows an X-ray view
49. Inside reverse-fold 50. Open and squash-fold 51. Zoom into the area
52. Fold through the two points, then unfold 53. Inside reverse-fold 54. Fold along the angle bisector, then unfold
161
55. Mountain-fold to the back 56. Mountain-fold to the back 57. Valley-fold following the line
58. Valley-fold along the angle bisector 59. Swivel-fold following the marks 60. Zoom into the area
61. Valley-fold along the angle bisector 62. Mountain-fold to the back 63. Fold through the two points, then unfold
64. Inside reverse-fold 65. Fold through the two points, then unfold 66. Swivel-fold following the marks
162
67. Swivel-fold following the marks 68. Valley-fold through the two points 69. Open-sink
68-70
70. Mountain-fold to the back 71. Repeat steps 68 to 70 72. Fold through the two points, then unfold
75-76
76. Valley-fold following the line 77. Repeat steps 75 to 76 78. Zoom into the area
163
79. Flip the bottom flap to the front 80. Swivel-fold following the marks 81. Valley-fold following the line
79-80
82. Repeat steps 79 to 80 83. Open and squash-fold 84. Valley-fold through the two points
85. Mountain-fold to the back 86. Valley-fold following the marks 87. Zoom into the area
88. Swivel-fold following the marks 89. Valley-fold through the two points 90. Completed!!!
164
安全出口 Exit
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 05/2019
纸张大小/Paper Size
30 x 30 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold along the angle bisector, then unfold
04. Fold through the two points, then unfold 05. Fold along the angle bisector, then unfold 06. Fold through the two points, then unfold
07. Fold between marked points, then unfold 08. Fold between marked points, then unfold 09. Fold between marked points, then unfold
165
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold 12. Fold along the angle bisector, then unfold
13. Fold along the angle bisector, then unfold 14. Fold along the angle bisector, then unfold 15. Fold along the angle bisector, then unfold
45°
16. Collapse using these creases 17. Zoom into the area 18. Fold along the angle bisector, then unfold
19. Inside reverse-fold 20. Fold along the angle bisector, then unfold 21. Special petal-fold
166
22. Swivel-fold following the marks 23. Zoom into the area 24. Fold through the two points, then unfold
25. Open and squash-fold 26. Valley-fold 27. Shift the outer flap behind
28. Result of previous step 29. Open and squash-fold 30. Inside reverse-fold
167
33. Shift the outer flap behind 34. Zoom into the area 35. Fold following the marks, then unfold
36. Outside reverse-fold 37. Fold along the angle bisector, then unfold 38. Valley-fold through the two points
39. Fold edge-to-edge, then unfold 40. Valley-fold along the angle bisector 41. Swivel-fold along the angle bisector
42. Inside reverse-fold 43. Pull out the inner paper 44. Fold along the angle bisector, then unfold
168
45. Mountain-fold to the back 46. Valley-fold between marked points 47. Mountain-fold to the back
50. Fold along the angle bisector, then unfold 51. Inside reverse-fold 52. Special petal-fold
53. Zoom into the area 54. Valley-fold along the angle bisector 55. Pull out the inner paper
169
56. Fold verticallly following the marks 57. Valley-fold following the line 58. Pull out the inner paper
59. Fold following the marks, then unfold 60. Open and squash-fold 61. Zoom into the area
62. Flip the top flap to the back 63. Result of previous step 64. Mountain-fold to the back
65. Valley-fold 66. Mountain-fold to the back 67. Valley-fold following the marks
170
68. Zoom into the area 69. Swivel-fold along the angle bisector 70. Shift the outer flap behind
71. Result of previous step 72. Fold through the two points, then unfold 73. Mountain-fold to the back
74. Valley-fold 75. Fold along the angle bisector, then unfold 76. Swivel-fold
77. Pull out the inner paper 78. Valley-fold along the angle bisector 79. Mountain-fold to the back
171
80. Valley-fold following the line 81. Valley-fold following the marks 82. Pull out the inner paper
83. Valley-fold following the line 84. Pull out the inner paper 85. Fold between marked points, then unfold
86. Outside reverse-fold 87. Zoom into the area 88. Fold following the marks, then unfold
89. Swivel-fold along the angle bisector 90. Shift the outer flap behind 91. Result of previous step
172
92. Mountain-fold to the back 93. Fold following the marks, then unfold 94. Fold between marked points, then unfold
95. Valley-fold following the marks 96. Zoom into the area 97. Pull out the inner paper
98. Inside reverse-fold 99. Swivel-fold along the angle bisector 100. Mountain-fold to the back
101. Result of previous step 102. Valley-fold along the angle bisector 103. Fold following the marks, then unfold
173
104. Open and squash-fold 105. Zoom into the area 106. Fold along the angle bisector, then unfold
107. Inside reverse-fold 108. Valley-fold along the angle bisector 109. Fold edge-to-edge, then unfold
110. Mountain-fold to the back 111. Mountain-fold to the back 112. Fold along the angle bisector, then unfold
113. Mountain-fold to the back 114. Shift the outer flap behind 115. Completed!!!
174
我爱你 I Love You
设计/Designer
苦茶/Kucha 01/2020
制图/Diagrams
苦茶/Kucha 02/2020
纸张大小/Paper Size
30 x 30 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold between marked points, then unfold
04. Fold along the angle bisector, then unfold 05. Fold along the angle bisector, then unfold 06. Fold between marked points, then unfold
180°
07. Fold between marked points, then unfold 08. Fold along the angle bisector, then unfold 09. Zoom into the area
175
10. Fold between marked points, then unfold 11. Fold along the angle bisector, then unfold 12. Fold along the angle bisector, then unfold
13. Fold between marked points, then unfold 14. Fold between marked points, then unfold 15. Valley-fold between marked points
16. Swivel-fold following the marks 17. Fold along the angle bisector, then unfold 18. Inside reverse-fold
19. Open and squash-fold 20. Fold through the two points, then unfold 21. Flip the bottom flap to the front
176
22. Inside reverse-fold 23. Valley-fold following the line 24. Fold along the angle bisector, then unfold
25. Open-sink 26. Zoom into the area 27. Valley-fold between marked points
28. Valley-fold following the line 29. Pull out the inner paper 30. Fold along the angle bisector, then unfold
31. Inside reverse-fold 32. Valley-fold following the line 33. Special petal-fold
177
34. Valley-fold following the line 35. Valley-fold following the line 36. Fold between marked points, then unfold
37. Inside reverse-fold 38. Valley-fold along the angle bisector 39. Valley-fold
40. Zoom into the area 41. Fold along the angle bisector, then unfold 42. Fold along the angle bisector, then unfold
43. Valley-fold following the line 44. Closed-sink 45. Zoom into the area
178
46. Inside reverse-fold 47. Mountain-fold to the back 48. Result of previous step
49. Valley-fold following the line 50. Fold along the angle bisector, then unfold 51. Inside reverse-fold
52. Fold verticallly following the marks 53. Open the flap 54. Flatten the model
55. Valley-fold following the line 56. Closed-sink 57. Result of previous step
179
58. Swivel-fold following the marks 59. Inside reverse-fold 60. Valley-fold along the angle bisector
45°
61. Result of previous step 62. Zoom into the area 63. Valley-fold
64. Fold along the angle bisector, then unfold 65. Fold between marked points, then unfold 66. Fold verticallly following the marks
67. Fold verticallly following the marks 68. Valley-fold 69. Pull out the inner paper
180
70. Zoom into the area 71. Mountain-fold to the back 72. Mountain-fold to the back
73. Open the flap 74. Flatten the model 75. Shift the inner flap to the front
76. Result of previous step 77. Fold following the marks, then unfold 78. Valley-fold along the angle bisector
79. Push the flap inside 80. Valley-fold between marked points 81. Flatten the model
181
82. Pull out the inner paper 83. Valley-fold 84. Valley-fold through the two points
88. Pull out the inner paper 89. Fold through the two points, then unfold 90. Mountain-fold to the back
91. Shift the outer flap behind 92. Valley-fold between marked points 93. Flip the top flap to the back
182
94. Valley-fold through the two points 95. Mountain-fold to the back 96. Zoom into the area
97. Swivel-fold 98. Mountain-fold to the back 99. Mountain-fold to the back
100. Mountain-fold to the back 101. Zoom into the area 102. Mountain-fold to the back
103. Mountain-fold to the back 104. Result of previous step 105. Completed!!!
183
纸鹤钟表 Crane Clock
设计/Designer
苦茶/Kucha xx/2019
制图/Diagrams
苦茶/Kucha 07/2019
纸张大小/Paper Size
45 x 45 cm
01. Fold along the angle bisector, then unfold 02. Fold between marked points, then unfold 03. Fold along the angle bisector, then unfold
04. Fold through the two points, then unfold 05. Fold along the angle bisector, then unfold 06. Fold through the two points, then unfold
07. Fold between marked points, then unfold 08. Fold between marked points, then unfold 09. Fold between marked points, then unfold
184
10. Fold between marked points, then unfold 11. Fold between marked points, then unfold 12. Fold between marked points, then unfold
13. Fold along the angle bisector, then unfold 14. Fold along the angle bisector, then unfold 15. Fold through the two points, then unfold
16. Fold through the two points, then unfold 17. Fold between marked points, then unfold 18. Fold between marked points, then unfold
19. Fold between marked points, then unfold 20. Fold between marked points, then unfold 21. Collapse using these creases
185
22. Valley-fold through the two points 23. Valley-fold through the two points 24. Open-sink
25. Flatten the model 26. Flip the top flap to the back 27. Inside reverse-fold
23-26
28. Valley-fold through the two points 29. Repeat steps 23 to 26 30. Swivel-fold following the marks
31. Inside reverse-fold 32. Fold along the angle bisector, then unfold 33. Fold through the two points, then unfold
186
34. Collapse using these creases 35. Hold and pull the flap 36. Swivel-fold following the marks
31-35
37. Repeat steps 31 to 35 38. Swivel-fold following the marks 39. Valley-fold
40. Pull out the inner paper 41. Valley-fold along the angle bisector 42. Hold and pull the flap
43. Flip the top flap to the back 44. Valley-fold along the angle bisector 45. Hold and pull the flap
187
135°
46. Flip the top flap to the back 47. Open and squash-fold 48. Zoom into the area
49. Fold between marked points, then unfold 50. Valley-fold through the two points 51. Swivel-fold following the marks
52. Zoom into the area 53. Fold along the angle bisector, then unfold 54. Fold along the angle bisector, then unfold
55. Fold along the angle bisector, then unfold 56. Special rabbit-ear fold 57. Zoom into the area
188
58. Pull out the inner paper 59. Fold along the angle bisector, then unfold 60. Open and squash-fold
61. Zoom into the area 62. Fold along the angle bisector, then unfold 63. Petal-fold
64. Valley-fold between marked points 65. Mountain-fold to the back 66. Inside reverse-fold
67. Inside reverse-fold 68. Valley-fold following the marks 69. Result of previous step
189
70. Zoom into the area 71. Fold between marked points, then unfold 72. Fold through the two points, then unfold
73. Valley-fold following the line 74. Valley-fold between marked points 75. Inside reverse-fold
76. Pull out the inner paper 77. Valley-fold between marked points 78. Pull out the inner paper
79. Zoom into the area 80. Swivel-fold 81. Result of previous step
190
71-82
71-82
80-81
82. Repeat steps 80 to 81 83. Repeat steps 71 to 82 84. Zoom into the area
85. Valley-fold 86. Fold between marked points, then unfold 87. Fold along the angle bisector, then unfold
191
80-81
86-96
97. Repeat steps 86 to 96 98. Valley-fold between marked points 99. Flip the top flap to the back
98-101
100. Open and squash-fold 101. Special petal-fold 102. Repeat steps 98 to 101
103. Flip the top flap to the back 104. Zoom into the area 105. Fold along the angle bisector, then unfold
192
106. Open and squash-fold 107. Fold along the angle bisector, then unfold 108. Petal-fold
109. Flip the top flap to the back 110. Valley-fold between marked points 111. Result of previous step
105-106
105-109
112. Repeat steps 105 to 109 113. Repeat steps 105 to 106 114. Zoom into the area
115. Valley-fold between marked points 116. Result of previous step 117. Completed!!!
193
灯台鼠 Greedy Mouse
设计/Designer
苦茶/Kucha 02/2020
制图/Diagrams
苦茶/Kucha 02/2021
纸张大小/Paper Size
30 x 30 cm
边界 / Border line
峰线 / Mountain line
谷线 / Valley line
194
禁止使用剪刀 No Scissors
设计/Designer
苦茶/Kucha 03/2019
制图/Diagrams
苦茶/Kucha 02/2021
纸张大小/Paper Size
45 x 45 cm
边界 / Border line
峰线 / Mountain line
谷线 / Valley line
195
196