DEFINITION DIRECTIONS OF USE Novo Cure WB is a membrane forming wax • Stir the drum well before using. emulsion curing compound which, when applied to • Novo Cure WB is a spray applied to surface of damp concrete, seals in moisture, arrests the newly placed concrete, when concrete surface evaporation and ensure adequate hydration of the start setting (sure there is not water on the body and concrete surface. surface) • Novo Cure WB should be applied as soon as STANDARDS possible after the concrete surface has been Novo Cure WB meets specific requirement of finished, i.e. (generally within 30 minutes or ASTM C309 earlier if in conditions or hot sun or strong dry FIELD OF USES winds). Novo Cure WB is used to provide a membrane on • The nozzle of spray should be held approximately the surface of newly placed concrete to retain 450 mm from the surface and passed back and moisture for effective curing to take place. forth to affect complete coverage. • The pressure on the pump must be maintained at ADVANTAGES all times to produce a fine spray. It is better to • Reduce surface shrinkage and cracking. apply Novo Cure WB by roller on trowel led • Enable concrete to hydrate more efficiently. floors. Immediately after use, the spraying • Ease of application. equipment should be cleaned out, especially the • No waiting-apply as soon for damp hessian, line and nozzle, with white spirit. sand or polyethylene. • To ensure the breakdown of the Novo Cure WB • Reduce labor costs. film, excessive coating must be avoided (see recommend coverage rates) • Form a tough film on the surface of freshly • For the application of Novo Cure WB, various placed concrete or render. This enables the types of spraying equipment can be supplied, or cement to hydrate more efficiently, eliminates motorized sprayers. the causes of shrinkage cracking and produces STORAGE high compressive strength with a harder wearing surface to the concrete. • The temperature must be kept within the range (10 – 30) ºC. If this temperature is exceeded a • Films have a “built in” break down system causing the film to disintegrate by the month, respect advice should be sought from the depending on weather conditions. supplier. PROPERTIES @ 25 C° PACKING Color Light yellow liquid 20 litres Specific 1.23 ± 0.05 gm./cm3 200 litres gravity PRECAUTIONS & SAFETY PH 8-9 • Wear protective clothes, gloves, glasses and face Rate of use 7-8 m2/kg (depend on the protection. surface conditions of concrete) • Good ventilations in case of Spray application. Shelf life 12 months in suitable storage • For skin contact, remove it with suitable cream conditions followed by soap and water cleaning. • For eye contact, rinse with plenty clean water then ask for medical advice.