Professional Documents
Culture Documents
Data sheet
Kongskilde’s FRL, FEA and TRL blowers constitute a range of
proven conveying blowers, which are an ideal energy source
for a vast number of industrial material handling systems.
The Kongskilde blowers are very Description
suitable for a wide variety of The aerodynamic shape of the
applications, including air supply, Kongskilde blower ensures
conveying purposes, and ventilation high efficiency and low energy
where high pressure are required. consumption.
The blowers can be used for both The blowers are designed as a
suction- and blowing systems as well centrifugal fan with a perfectly
as suction-blowing-systems. balanced rotor and thus a
But they are not intended for corrosive vibrationfree operation, which
gases and the air temperature must minimises the noise level.
not exceed 70°C.
Application
FRL/FEA But they are also very suitable for most TRL 20/40/55/75
Kongskilde’s FEA 10 is a one-stage suction purposes e.g. suction of TRL 20/40/55/75 are directly driven.
centrifugal blower with a closed rotor welding fume as well as to solve many TRL 20/40/75 are supplied with air
with 6 forward curved blades. It is ventilation tasks. intake mesh guards.
particularly built for ventilation tasks.
Suitable applications include suction The small and medium-sized blowers TRL 55 is supplied with automatic air
of welding fume and gases. are one-stage centrifugal blowers with regulator.
closed rotors, whereas TRL 300 and
FRL 10 is a one-stage centrifugal 500 have two respectively three TRL 100/150/200
blower with an open rotor with 8 stages, which also are equipped with, Within the TRL 100/150/200 blowers,
backward curved blades. Therefore, closed rotors. pressure and air volume can always be
light material as e.g. plastic flakes can adjusted to the purpose thanks to the
successfully be conveyed through the TRL 55/100/150/200/300 and 500 are ability of adjusting the rpm of the
fan. The blower is at the same time equipped with air regulator. rotor.
very suitable for light dust and Combining the blower with an air The blowers can be fitted with 7.5 to
shavings exhaust purposes. regulator optimises the conveying 15 kW motors, which have been
air speed by keeping the air velocity adjusted to the rpm of the rotor.
Both types (FRL/FEA) are available below 25 m/s, which minimises
with and without motor. damage of the material even when The blowers are delivered with V-belt
conveying delicate materials. The transmission.
TRL constant air velocity does also
The Kongskilde high-pressure blowers prevent overloading of the motor and TRL 300/500
are available in a wide range of sizes – minimises the power consumption. The special advantage of the TRL
providing a variety of performance 300/500 blowers is that they are
characteristics capable of meeting TRL20/40 can be used as either capable of supplying an exceptional
specific industrial requirements. transport blower or suction blower high pressure caused by the two-
whereas the TRL 55/75/100/150/ respectively three-step construction as
The TRL range with accessories is ideal 200/300/500 can be utilised for both each stage of the blower increases the
for conveying of granular material and suction and blowing as well as they air pressure.
similar products with specific weight can be installed as a combination of a
between 0.2 and 0.8 ton/m3. suction-blowing-system.
675
531
130
307
107
635 335
206
485
463
TRL 40 TRL 55
840
860
120
120
755 420
420
755 580 670
TRL 75
860
140
420
755 580
Technical Data
FRL 10 FEA 10 TRL 20 TRL 40 TRL 55 TRL 75
Motor rating, kW (Hp) 0.75 (1) 0.75 (1) 1.5 (2) 3 (4) 4 (5.5) 5.5 (7.5)
Weight w. motor, kg 21 21 35 67 76 96
119
1000
117
695
370
370 435
1140
1140 875
1006
929
108
120
583
955 MAX. 1380
1225 1135
1330
Technical Data
TRL 100 TRL 150 TRL 200 TRL 300 TRL 500
Technical Data
TRL 600 TRL 750 TRL 1000
Amp. 78 96 129
PerformanceTRL600
curves forPerformance
TRL600 –curves
1000 without
regulationair regulator:
Air Reg.– 1000
- 1000 w.o.
Performance curves
TRL600 for
- 1000 TRL600
OK160,
8000
with air regulation for OK160:
7000
9000
6000
8000
Pressure (mm WG)
5000 7000
TRL1000
4000 6000
TRL750 TRL1000
mm WG
1000 3000
2000
0
0 1000 2000 3000 4000 5000 6000 7000 1000
m3/h
0
0 500 1000 1500 2000
m3/h
Air volume
The max. air volume delivered by the TRL blowers with air regulator is approximately 1800 m3/h at different pressures
depending on the type of blower. It is a general rule in pneumatic conveying that the higher pressure in the system, the
higher the transfer rate.
123001859 EXP/GB/TRL/DATA/0319
Subject to be changed without notice.