Professional Documents
Culture Documents
DP-S850/S650/S620/S550/S520/S510
Instruction Manual
も 保管
▧Introduction
Thank you for your purchase of the DUPRINTER DP-S850,S650,S620,S550,S520, S510.
To ensure safe and efficient prolonged use of this machine, read and thoroughly understand this
manual before using this machine.
After using this manual, be sure to keep it in a place to handy reference.
3. Copyrighted materials
● Books, music, artwork, prints, maps, diagrams, movies, photography, etc. are banned from
duplicating outside the limits of private home use and their related non-sale usage.
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this manual are
subject to change without notice. If the manual contains anything that you do not understand,
contact the manufacturer for clarification.
2
Notes on Safety (Please Read and Observe)
Safety Precautions
Various symbols and pictures are used in this manual and on the stickers affixed to the machine.
These symbols and pictures provide warnings and instructions to prevent danger to you or other
personnel, and to prevent damage to office property.
The meanings of these symbols and pictures are explained below.
WARNING
Indicate a high degree of potential danger. If the warning is ignored, death or serious injury may
result.
CAUTION
Indicate a medium degree of potential danger. If the caution is ignored, medium injury or
damaged to property may result.
WARNING
● If the machine is used after foreign matter (metal fragments, water, or liquid) has
entered the machine, this may result in fire or electric shock.
→ Turn the main unit’s power switch OFF, and then remove the power plug from the
outlet. Contact the sales distributor.
● If the machine is used after heat, smoke, strange smell, or other abnormality is
detected, this may result in fire or electric shock.
→ Turn the main unit’s power switch OFF, and then remove the power plug from the
outlet. Contact the sales distributor.
● Do not insert or drop metal, flammable material, or other matter through the ventilation
holes into the machine interior.
→ Doing so may result in fire or electric shock.
● Do not place flower vases, flowerpots, cups, or water containers (including metal
containers) on top of the machine.
→ Fire or electric shock may result if liquid spills inside the machine.
3
CAUTION
● Some paper may cause paper dust in the machine. Keep clean the machine and
sufficient ventilation.
●Caution for Grounding (Be sure to use the supplied power cord)
WARNING
● Use only the power cord that is provided among the accessories.
Insert the power cord plug firmly into the socket, so that proper electrical contact is
effected.
→ Use of any other power cord could result in imperfect grounding.
If grounding is imperfect and electrical leakage occurs, fire or electric shock could
result.
WARNING
● Do not use a source voltage other than that specified.
Do not connect two or more loads to a single outlet.
→ Doing so may result in fire or electric shock.
WARNING
● Remove the power plug itself, not the cord.
→ Tugging the cord may damage it (expose conductors, or cause disconnections,
etc.), resulting in fire or electric shock.
4
●Prohibition of Disassembly or Modification
WARNING
● Do not modify the machine.
→ Doing so may result in fire or electric shock.
● Do not remove the rear lid, cabinet, or covers from the machine.
→ The inside of the machine contains high-voltage parts, which may cause electric
shock.
WARNING
● Do not place the machine in a humid or dusty area.
→ Doing so may result in fire or electric shock.
CAUTION
● Before moving the machine, remove the power plug from the outlet.
→ If the cord is damaged, this may result in fire or electric shock.
● Do not place the machine in a place subject to direct sunlight or heating equipment
such as a stove.
→ It may degrade ink quality and affect printing. The machine also may
malfunction.
● Avoid placing the machine in a place subject to high or low temperature or high
humidity.
→ The paper absorbs moisture and it may cause paper jam or creasing.
5
●Do not connect phone lines to LAN connector.
●Notes on Ink
CAUTION
● If ink gets into eyes or mouth, immediately wash it away with water and contact a
doctor.
● If ink comes into contact to skin, immediately wash it away with soap and water.
Storage conditions:
6
●Locations of warning labels
Keep the WARNING and CAUTION labels clean at all times. If labels become damaged or
come off, please call our service person.
7
Contents
Before Use
Part Names and Their Functions ······················································································ 12
Printer Appearance (including options) ············································································· 12
Inside of Printer ··················································································································· 13
Outside / Inside of Print Output Side ················································································· 14
Control Panel ······················································································································· 15
Display Screen ···················································································································· 16
Turning Power ON/OFF ····································································································· 17
Standard Mode ···················································································································· 18
Document / Printing Paper Specifications ········································································ 19
How Master Making and Printing are Performed ···························································· 20
Basic Operations
Preparing for Printing ·········································································································· 22
Loading Documents ··········································································································· 25
Basic Printing ······················································································································· 27
Enlargement and Reduction ······························································································ 29
Selecting Printing Paper Size ····························································································· 30
Print Speed Adjustment ······································································································· 31
How to Adjust TOP SPEED ···························································································· 32
Printing with Useful Functions
Enlargement / Reduction ···································································································· 34
Enlargement / Reduction ······························································································· 34
Minor Reduction ·············································································································· 35
Auto Zoom ······················································································································· 36
Free Zoom ······················································································································· 38
Custom Scaing ················································································································ 39
Adjusting Darkness ············································································································· 41
How to Adjust Scan Darkness ······················································································· 42
How to Adjust Master Darkness ····················································································· 43
How to Adjust Print Darkness ························································································· 44
Printing Photographs and Color Documents ···································································· 45
TEXT, TEXT>PHOTO, PHOTO>TEXT, PHOTO, PENCIL ········································ 45
Screen (coarse) / Screen (fine) ······················································································ 46
Adjusting Print Position ········································································································ 47
8
Printing with Various Functions
Edit Function
Preview ···························································································································· 50
Multiple Printing ··············································································································· 53
Multiple Printing on One Page ··················································································· 53
2-in-1 Layout (Available only with ADF installed) ····················································· 57
Custom ························································································································· 60
Book Shadow Erasure ··································································································· 62
90° Rotation ····················································································································· 66
Document Memory ········································································································· 68
Document Size ················································································································ 70
Special Function
Job Setting Memory ········································································································ 72
Saving / Retrieving / Confirming the Settings ··························································· 72
Saving Settings ············································································································ 72
Retrieving Settings ······································································································· 76
Clearing Settings ·········································································································· 79
Paper Type ······················································································································· 80
Double Feed Detection ··································································································· 81
Narrow Paper ··················································································································· 83
Replenishing Ink ··············································································································· 85
Confidential Safeguard ···································································································· 86
Document Darkness Detection ······················································································ 88
Batch Print / Sequential Batch Print ··············································································· 90
How to Set Batch Print / Sequential Batch Print ······················································· 91
How to Enter the Numeric Values for Batch Print / Sequential Batch Print ············ 92
Dividing Sections with Tape (Available only with Tape Cluster Unit) ··························· 93
Peripheral Function
Online Mode ····················································································································· 94
Tape Cluster (Available onoy with Tape Cluster Unit) ··················································· 95
Drum Size (Available only with A3/A4 Drum) ································································ 97
Setting Function
Initial Configuration ·········································································································· 98
Energy Save Mode ······································································································· 100
Automatic Power OFF ·································································································· 102
Automatic Reset ············································································································ 104
Fine Start ························································································································ 106
Optimize Print ················································································································ 108
Preprint ··························································································································· 110
Repeat Counter ················································································································· 114
Buzzer ····························································································································· 116
9
Information ··························································································································· 118
Replacing Consumables
Replacing Ink Pack ·············································································································· 120
Replacing Ink Pack ·············································································································· 122
How to Dispose of Used Masters ······················································································ 125
Replacing Drum Unit ··········································································································· 127
Replacing Separator Unit ···································································································· 128
Troubleshooting
If trouble occurs ···················································································································· 130
When messages appear ····································································································· 131
When ‘PAPER JAM ON THE EJECTION SIDE’ is displayed············································· 136
Maintenance
Daily Maintenance ··············································································································· 136
10
Before Use
11
■ Part Names and Their Functions
● Printer Appearance (including options)
Connector (PC)
Scanner cover
Keep the document in contact
with the document glass plate.
Glass
The document is placed on
this glass.
Scale
CF card
connector
Feed tray
Feed tray descend
Support switch
tray Press to lower the feed
tray.
Front cover
Open this cover to replace
the ink pack and drum unit.
Cabinet
12
● Inside of printer
Master feed section
Master cover
Scanner unit
Drum handle
Ink holder
Ink pack
13
● Outside / Inside of print output side
Master ejection section
Power switch
Paper stacker
guide
Adjust these
according to the
paper size.
Print tray
14
● Control Panel (DP-S850/S650/S620)
1 2 3 4 5 6
7 8 9 10 11 12 13 14 15 16
No. Name Function
1 Clip holder
2 Pen holder
3 RESET key Returns setting to standard mode. Setting not stored is cleared.
4 Control keys
PRINT DARKNESS Controls print darkness.
keys
PRINT POSITION Controls print position (horizontal/vertical).
keys * PRINT POSITION keys for horizontal are not available on
DP-S550/S520/S510.
PRINT SPEED keys Controls print speed.
5 ENERGY SAVE key Turns the LCD panel OFF. (Reduces standby power consumption.)
6 LCD BRIGHTNESS Controls brightness of the LCD.
ADJUST DIAL
7 LAMP Blinks to indicate the status of the machine.
Green: Operating Red: Error message is displayed.
Orange: Message replacing consumables is displayed.
8 LCD (touch panel) Displays current settings such as number of printed sheet. Touch to
change settings. Displays error messages in case of error.
9 PROPERTY key Press to use special functions.
10 CLEAR key Returns the print volume to 0.
Other settings on the control panel are not changed.
11 NUMERIC keys Enters the print volume.
12 key Enters the print and group number in batch printing.
13 MASTER MAKING Starts making a master. Master making cannot be performed during
key printing.
Clear the number of print before master making.
14 PRINT key Starts printing. This key does not start making a master. Printing
cannot start when the light of the PRINT key is red (When confidential
function is set, when a master is not set on the drum, when error is
displayed, when the number of print is not entered).
15 STOP key Stops printing.
15
When this key is pressed during making a master, the machine stops
after making a master.
16 TEST PRINT key Prints 1 copy to check the image position and density.
● Display Screen
The operation status or messages appear on the LCD panel.
Message appears.
Number of print
Paper size
Document type
Zoom Print position
Density
Clock time
Document size Touch when you Total master make count, total Icon is displayed
set various print count, master roll remaining when edit function
functions amount, used master amount is set.
The above screen is for the DP-S850. Some function icons are not displayed on other models.
NOTES:
You can select setting by touching the LCD and buttons softly.
Please DO NOT PRESS the LCD panel and buttons strongly.
16
■ Turning Power ON/OFF
● Turning Power ON
1. Connect the “female plug” of the power supply cord to the
“inlet”.
17
● Key Card Counter (optional)
The message “ RE-INSERT CARD “ is displayed on the
LCD panel.
Insert a key card in the key card counter.
■ Standard Mode
When the printer power is first turned ON or the RESET key is pressed, the functions are reset to
standard mode.
Standard mode settings are as follows:
The settings are different if the default settings are changed.
Print quantity :0
Paper size : A3(DP-S850/S650/S550), B4(DP-S620/S520), Legal (DP-S510)
Zoom : Auto zoom (DP-S850/S650/S620), 100% (DP-S550/S520/S510)
Master darkness : ±0
Scan darkness : ±0
Image mode : TEXT > PHOTO
Document size : Auto zoom (DP-S850/S650/S620), A3 (DP-S550), B4 (DP-S520),
Legal (DP-S510)
Print position : 0mm
Print darkness : ±0
Print speed : Speed 3
18
■ Document / Printing Paper Specifications
■ Acceptable Documents
● Document glass plate
* Sheet documents and books not exceeding 10kg
* Size: 297mm × 432mm (max.)
● Automatic document feeder (ADF)(optional)
* Document thickness : 64gsm - 128gsm
* Document size : 297mm × 432mm (max.)
100mm × 148mm (min.)
* Stacking capacity in document tray : 100 sheets (64gsm), 85 sheets (80gsm)
19
■ How Master Making and Printing are Performed
Master Making
● In the “master making” process, the old master on the drum is removed while the thermal head
creates the scanned image onthe new master and transfers it onto the drum.
Printing
● In the “printing” process, paper separated from the stack by the feeder roller and paper separator
unit is pressed against the drum unit by the press roller. There are small holes over only the
image area of the master that is attached to the drum, and ink that seeps from these holes is
transferred to the paper. The paper is then peeled from the master by the paper stripper finger
and the top blow fan. The paper is directed onto the paper ejection belt by a fan unit and
discharged from the machine.
20
Basic Operations
21
■ Preparing for Printing
● How to Set Papers
1. Open the “support tray”.
2. Hold the “side guide lever” and adjust the “side guide”
according to the paper size.
4. Put the sheets between the “side guides” and push them
to the inside.
REFERENCE:
About 1500 sheets of 64gsm high-quality paper can be
loaded.
IMPORTANT:
Height of sheets loaded should not exceed 140mm.
22
6. Adjust the “separation pressure adjuster knob”
to the paper feed pressure.
If no paper is fed
Turn the “separation pressure adjuster knob”
to “LOW”
CAUTION
When you adjust separation pressure knob, make sure to remove the paper in the
paper tray and confirm that the tray stops at the bottom.
If you adjust at other positions, your finger or hands may get injured.
WARNING
Do NOT put hands near the side guides, feed rollers, slot holes on both side frames or
below the feed tray. Hands could get caught up or crushed.
REFERENCE:
When paper runs out or papers in the feed tray are
removed, the feed tray is automatically lowered.
IMPORTANT:
● When supplying different size paper, set the “paper stacker guide“ and “paper
stopper“ again.
● When supplying different quality paper, adjust the “paper pressure adjuster lever“ and
“Separation pressure adjuster knob“.
23
● How to Set the Print Tray
1. Open out the “print tray”.
24
■ Loading Documents
● Loading Document on Document Glass Plate
The document can be loaded in the “portrait” or landscape” position.
IMPORTANT:
● A4, B5, and A5-size documents can be loaded in the “portrait” or landscape”
position.
● Use the landscape position when enlarging or reducing from standard-size
documents to standard-size paper, such as A4 to A3.
● A3 and B4 documents can only be loaded in the landscape position.
REFERENCE:
Document
When you load a non standard-size document,
place it with the center of the document aligned
with the arrow on the guide (scale).
Scale
IMPORTANT:
● When you place a thick document such as a book on the document glass plate, take
care not to force the scanner cover as this may damage the document glass plate with
a risk of personal injury.
● Turn the power switch ON before placing a document. If not, the machine cannot
recognize the document size correctly.
25
● Loading Document in Automatic Document Feeder (ADF) (Optional)
Load documents that consist of sheets to be printed in the ADF.
When one or more documents are loaded in the ADF, master making and printing are
automatically repeated until the document tray is empty.
IMPORTANT:
ADF mode is automatically selected when a document is loaded in the ADF.
The ADF then takes priority over the document glass plate in the master making process.
1. Align the “document guides” with the marks for the size
of document to be loaded in the ADF.
IMPORTANT:
Do not attempt to remove or add to the documents in
the document tray while master making and printing
are in progress.
26
■ Basic Printing
● Printing Using Basic Functions
1. Press the “I” side on the “power switch”.
NOTE: Turning Power ON/OFF ➔ See page 17.
2. Load paper.
NOTE: Preparing for Printing ➔ See page 22.
6. Set functions.
IMPORTANT:
● The test print is for verification purposes only and
may be fainter than the final print.
● You can enter the number of desired prints before
pressing the MASTER MAKING key to
immediately print the required number of copies.
27
9. Use the NUMERIC keys to enter the “number of prints”.
REFERENCE:
● You can specify up to 9999 prints.
● If you desire to change the “number of prints “,
press the CLEAR key and then enter the correct
number.
REFERENCE:
When you desire to stop a print run, press the STOP
key. To restart the print run, press the PRINT key
again.
28
■ Enlargement and Reduction
● Enlargement and Reduction from standard-size documents to standard-size
paper
You can enlarge or reduce the size of the copy to the desired size from standard-size documents
to standard-size paper.
● Enlargement
You can make a copy that is enlarged from
standard-size document to standard-size paper.
141% A4R→A3 / B5R→B4 / A5R→A4R
122% A4R→B4 / A5R→B5R
115% B4→A3 / B5R→A4R
● Reduction
You can make a copy that is reduced from
standard-size document to standard-size paper.
86% A3→B4 / A4R→B5R
81% B4→A4R / B5R→A5R
70% A3→A4R / B4 →B5R
1. Touch “ZOOM”.
A table of zoom is displayed on the LCD panel.
NOTES:
When you desire to return zoom to 100%:
Use one of the following methods.
● Touch “ZOOM” and select “100%”.
● Press the RESET key.
In this case, all settings are reset to standard mode.
* AUTO ZOOM function is not available on
DP-S550/S520/S510.
29
■ Selecting Printing Paper Size
● Paper Size
IMPORTANT:
● When you do not select a paper size and print to a smaller paper, the internal parts
of the machine and the print may be soiled.
● You will not obtain the correct layout when you start multiple printing with
a wrong-sized paper selected.
30
■ Print Speed Adjustment
● Print Speed Adjustment Function
Print speed can be adjusted in 5 steps between 45 pages per minute and 130 pages
per minute, and TOP speed (150 sheets per minute).
The default setting when the power is turned ON is about 100 pages per minute (standard
speed). However, when default settings have been changed in user settings, the print speed
becomes currently set print speed.
NOTES:
● Paper jam may occur more frequently and the paper stacking may deteriorate
at high and low speeds with certain types of paper and with certain image.
Use the (LOW) or (HIGH) key to select the optimum print speed.
● You can adjust the print speed while the machine is printing.
REFERENCES:
To return to the default setting (about 100 pages per minute):
● Press the (LOW) or (HIGH) key repeatedly until the speed lamp moves to the
center.
● After pressing the STOP key, press the RESET key.
In this case, all settings are reset to standard mode. However, when default
settings have been changed in user settings, the print speed becomes the
currently set print speed.
31
□ How to Adjust TOP SPEED
REFERENCE:
To return to the default setting (about 100 pages per minute):
● Press the (LOW) or (HIGH) key repeatedly until the speed lamp moves to center.
● After pressing the STOP key, press the RESET key.
In this case, all settings are reset to standard mode. However, when default
settings have been changed in user settings, the print speed becomes the
currently set print speed.
32
Printing with Useful Functions
33
■ Enlargement / Reduction
● Enlargement / Reduction
You can enlarge or reduce the size of the copy to the desired size.
A4 document A4 printout
● Minor Reduction ➔ page 35
You can make a copy that is slightly smaller
(90 - 99%) than the original document.
Vertical direction
● Custom Scaling ➔ page 39
Youcan enlarge or reduce the size of the copy
in 1% increments between 50% and 500% in
vertical/horizontal direction.
Horizontal direction
34
● Minor Reduction
The copy is printed at 90 - 99% size of the document.
Minor reduction is used when you desire to make a A4 document A4 printout
binding margin or the document has text or
illustrations in non-master making area.
IMPORTANT:
Select MINOR REDUCTION before master
making.
2. Touch “ZOOM”.
A table of zoom ratios is displayed on the LCD panel.
5. Touch “OK”.
The zoom ratio is set and the display returns to initial
screen.
REFERENCE:
If you reset to 100%: Use one of the following methods.
● Touch “MINOR REDUCTION” again and select “OFF” and then press “OK”.
● Press the RESET key. In this case, all settings are reset to standard mode.
35
● Auto Zoom
The machine automatically selects the optimum zoom ratio and proceeds with master making
and printing when you load the document to be copied.
The auto zoom ratio is automatically selected from the following preset ratios (50% - 200%).
If you use other paper sizes or document sizes, the closest ratio is automatically selected from the
preset values.
IMPORTANT:
● Select “AUTO ZOOM” before starting master making.
● You cannot set document size OFF at the same time as auto zoom.
2. Touch “ZOOM”.
A table of zoom ratios is displayed on the LCD panel.
36
5. Load paper.
Preparing for Printing ➔ See page 22.
IMPORTANT:
If you are using the DP-S550/S520/S510:
Always select the size of printing paper to be used.
You cannot obtain the correct zoom ratio if you select a wrong paper size.
REFERENCE:
If you reset to 100%: Use one of the following
methods.
●Touch “ZOOM” and select 100%.
●Press the RESET key.
In this case, all settings are reset to
standard mode.
37
● Free Zoom
You can set a zoom ratio between 50 % and 500%
in 1% steps.
IMPORTANT:
Select “FREE ZOOM” before starting master
making.
2. Touch “ZOOM”.
A table of zoom ratios is displayed on the LCD panel.
5. Touch “OK”.
Free zoom is set and the display returns to initial screen.
REFERENCE:
If you reset to 100%: Use one of the following methods.
● Touch “ZOOM” and select 100%.
● Press the RESET key. In this case, all settings are reset to standard mode.
IMPORTANT: Text and lines may appear jagged at high zoom ratios.
38
● Custom Scaling
Vertical direction
You can enlarge or reduce the size of the copy in
1% increments between 50% and 500% in
vertical/horizontal direction.
IMPORTANT:
Set “CUSTOM SCALING” before starting master
making.
Horizontal Direction
2. Touch “ZOOM”.
A table of zoom ratios is displayed on the LCD panel.
39
3. Touch “CUSTOM SCALING”.
REFERENCE:
The value can be also entered using the NUMERIC keys.
5. Touch “OK”.
Zoom ratio is set and the display returns to initial screen.
REFERENCE:
If you reset to 100%: Use one of the following methods.
● Touch “ZOOM” and select 100%.
● Press the RESET key. In this case, all settings are reset to standard mode.
IMPORTANT:
Text and lines may appear jagged at high zoom ratio.
40
■ Adjusting Darkness
● Adjusting Darkness
If the test print made after master making is too light, adjust the print darkness. If you cannot
adjust the print darkness sufficiently to give a satisfactory print, adjust the master darkness.
IMPORTANT:
● You can print immediately after adjusting the print darkness.
● If you adjust the master darkness, you must repeat the master making process before
making prints.
● If you adjust the scan darkness, you must repeat the master making process before
making prints.
● Scan Darkness
Scan darkness can be adjusted in 5 steps.
If thin line is not printed, adjust the scan darkness.
When the color of the document is light, touch “DARK”.
When the color of the documents is dark, touch “LIGHT”.
IMPORTANT:
● Set scan darkness before starting master making.
● Thin line may not be printed even scan darkness is adjusted.
● Master Darkness
Master darkness can be adjusted in 5 steps.
When the color of the document is light, touch “DARK”.
When the color of the documents is dark, touch “LIGHT”.
IMPORTANT:
● Set master darkness before starting master making.
● Print Darkness
41
□ How to Adjust Scan Darkness
1. Touch “DARKNESS”.
3. Touch “OK”.
Scan darkness selected in the 2 above is set.
REFERENCE:
If you reset to standard:
Use one of the following methods.
● Touch “DARKNESS” again, and select “±0” by
touching LIGHT or DARK and then press “OK”.
● Press the RESET key.
In this case, all settings are reset to standard mode.
42
□ How to Adjust Master Darkness
1. Touch “DARKNESS”.
3. Touch “OK”.
Master darkness selected in the 2 above is set.
REFERENCE:
If you reset to standard:
Use one of the following methods
● Touch “DARKNESS” again, and select “±0” by
touching LIGHT or DARK and then press “OK”.
● Press the RESET key.
In this case, all settings are reset to standard mode.
43
□ How to Adjust Print Darkness
There are 2 methods to adjust print darkness.
REFERENCE:
If you reset to standard: Use one of the following methods.
● Move the print darkness indicating lamp to center using PRINT DARKNESS keys.
● Press the RESET key. In this case, all settings are reset to standard mode.
However, if print darkness is set in INITIAL CONFIGURATION, it returns to that one.
1. Touch “DARKNESS”.
IMPORTANT:
Even when PRT DARKNESS is set to AUTO, if print
darkness is adjusted using the CONTROL keys, the
setting will be changed from AUTO to MANUAL.
3. Touch “OK”.
Print darkness selected in the 2 above is set.
REFERENCE:
If you reset to standard: Use one of the following methods.
● Touch “DARKNESS” again, and select “±0” and then
press “OK”.
● Press the RESET key.
In this case, all settings are reset to standard mode.
44
■ Printing Photographs and Color Documents
● TEXT, TEXT>PHOTO, PHOTO>TEXT, PHOTO, PENCIL
This function includes five modes for enhancing text and photographic documents.
IMPORTANT:
Set “TEXT, TEXT>PHOTO, PHOTO>TEXT, PHOTO, PENCIL” before starting master
making.
45
● Screen (coarse) / Screen (fine)
This machine has the following modes for enhancing the printing of screen processing.
These modes enhance the printing of non-screened photographs.
SCREEN COARSE enhances more brilliant printing.
IMPORTANT:
Set “SCREEN COARSE / SCREEN FINE” before starting master making.
46
■ Adjusting Print Position
● Print Position Adjustment Function
After master making has finished, you can fine-tune the position of the printed image ±15mm in
the vertical direction and ±10mm in the horizontal direction.
IMPORTANT:
● You cannot adjust while printing. Stop the operation with the STOP key to
adjust the position.
● When narrow paper function (special function) is ON, print position should be “0”.
REFERENCE:
Touching the CURSOR keys adjusts print position as
well as control keys.
If you do not touch any CURSOR key for about 5
seconds, the display returns to initial screen.
47
Adjusting horizontal print position on the DP-S550/S520/S510
Turn the feed tray adjuster dial which is located in the right of the feed tray to adjust print position.
Turning the dial toward you moves the feed tray to the
left.
48
Printing with Various Functions
49
■ Edit Function: Preview
● Checking print image to be printed
You can preview print image to be printed on the LCD panel before starting master making.
For example, it is convenient to check if the print image can be fitted in the paper size when
enlarged or reduced.
2. Touch “PROPERTY”
3. Touch “EDIT”.
4. Touch “PREVIEW”.
5. Touch “ON”.
50
6. Press the MASTER MAKING key.
When no document is placed on the glass,
“THERE IS NO DOCUMENT ON SCANNER
CONTINUE? ”
is displayed.
Touch “NO” and place a document.
Press the MASTER MAKING key again.
Touch “SHIFT”.
Preview screen shifts by touching and moving the
screen.
51
9. Press the MASTER MAKING key.
If you touch “YES”, master making starts.
If you touch “NO”, the display returns to initial screen.
If you touch “RETURN”, the display returns to preview
screen.
52
■ Edit Function: Multiple Printing
● Multiple Printing on One Page
This mode allows you to print multiple copies of the document on one page and two different
documents on one page.
Multiple Printing
This mode prints multiple copies of the document on one page.
2 8
Document images Document images
Document 4 16
Document images
images
CUSTOM
You can make multiple printing as you desire.
Cut Line
You can put cut line on the printout.
It makes cut easy after printing.
IMPORTANT:
Master making for multiple printing requires more time than that for normal printing.
53
Multiple Printing
This mode allows you to print 2, 4, 8, or 16 copies
A3 A7
of the document on one page.
(B4) A4 A6 (B8)
If you are reducing or enlarging, refer to the right
(B5) (B7)
diagram to select the zoom ratio and the orientation
of the document.
A5
(B6)
REFERENCE:
Zoom ratio and orientation of the document
Portrait A3
Placement
Zoom ratio:
100%
A4 A4
A4
Landscape
Placement A3
Zoom ratio:
50%
54
How to Set Multiple Exposure
2. Touch “PROPERTY”.
3. Touch “EDIT”.
55
7. If you desire to put cut line, select “ON”.
If not, select “OFF”.
Multiple exposure is set.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “MULTIPLE EXPOSURE” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard mode.
8. Touch “END”.
The display returns to initial screen.
REFERENCE:
When multiple exposure is set, multiple exposure icon is displayed in the lower portion
of the screen.
If you touch the icon, setting display of multiple exposure appears and you can change
the setting.
56
● 2-in-1 Layout (Available only with ADF installed)
Two-in-one (2-in 1) mode allows you to print two small documents on one page and also easily
print for creating booklets that will be saddle stitched.
When you use 2-in-1 mode, the layout is as follows:
57
How to Set 2-in-1 Layout
2. Touch “PROPERTY”.
3. Touch “EDIT”.
6. Touch “2-in-1”.
58
7. Select orientation on the “2-in-1” screen.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “MULTIPLE EXPOSURE” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard mode.
REFERENCE:
If you experience problems with layout, check the followings:
* Document orientation
* Document size, paper size, zoom ratio
59
● Custom
2. Touch “PROPERTY”.
3. Touch “EDIT”.
60
6. Touch “CUSTOM”.
REFERENCE:
Up to 5 can be entered for each side.
7. Touch “OK”.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “MULTIPLE EXPOSURE” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard mode.
61
■ Edit Function: Book Shadow Erasure
● Book Shadow Erasure
This function erases the shadows caused by the book binding when printing an open spread
from a book or other folded document. It also erases the shadow around the periphery of the
document.
IMPORTANT:
● Select “BOOK SHADOW ERASURE” before starting master making.
● This function is not available with the ADF (Automatic Document Feeder) installed.
● Master making for shadow erasure requires more time than that for normal printing.
IMPORTANT:
The shadow is also erased from approximately
2mm around the periphery of the document.
Document Outline
● Outline Shadow Erasure
Prints documents with only the 6mm periphery
erased when printing an open spread from a
book or other folded document.
62
● Specify Area Document Specify Area
(Set A, B & C)
Prints documents with a specified area erased
when printing an open spread from a book or
other folded document. (The erasure area can
be selected within the range 0 to 99mm.)
IMPORTANT:
● Even if a margin (0 to 99mm) is set at ANY,
a slight error sometimes occurs.
● Even if “B” or “C” is set to 2mm or less,
the shadow is erased from approximately
2mm around the periphery of the document.
- SPECIFY AREA -
* Even if a numeric value smaller than 6 - 8 mm
(different depending on model) is selected at ANY,
2mm
a margin of 6 - 8mm is set for this leading edge Without shadow
erasure
section. 2mm
63
How to Set Book Shadow Erasure
2. Touch “PROPERTY”.
3. Touch “EDIT”.
64
7. The book shadow erasure selected in step 5 is set.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “SHADOW ERASURE” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard
mode.
8. Touch “END”.
Specify the sizes for “B” and “C” in the same procedure.
65
■ Edit Function: 90° Rotation
● How to Set 90° Rotation
REFERENCE:
If original image has solid portion, select proper rotation so that the solid portion comes to rear
part of print.
Example: If A3-size document has solid portion in the right side more than the left side,
select clockwise 90° rotation. Doing this prints out the right part of the
document on the rear part of the ejected printout.
IMPORTANT:
Master making for 90° rotation requires more time than that for normal master making.
2. Touch “PROPERTY”.
3. Touch “EDIT”.
66
5. Touch desired direction on the LCD panel.
Clockwise 90° rotation is selected here.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “90° ROTATION” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard mode.
8. Touch “END”.
67
■ Edit Function: Document Memory
● Document Memory
Document memory function enables master making which was performed previously again.
Only one document image is saved.
IMPORTANT:
● Saved image is cleared by turning the power off.
● Saved image is cleared by pressing the RESET key.
● This function is not available when the power is turned on or no master making is
performed.
● Document image of last master making is memorized.
● This function is not available when confidential function is set.
2. Touch “PROPERTY”.
3. Touch “EDIT”.
IMPORTANT:
This function cannot be selected when DOCUMENT
MEMORY is displayed with a dotted line.
Perform master making in this case.
68
6. Touch “ON”.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “DOCUMENT MEMORY” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard mode.
Also, document memory function cannot be selected unless document image is
cleared and master making is performed.
7. Touch “END”.
When document memory function is set, document memory icon is displayed in the lower
portion of the screen.
69
■ Edit Function: Document Size
● Document Size
REFERENCE:
● When the document is loaded in the portrait position in the ADF (Automatic
Document Feeder)
● When the document size is nonstandard
● When the machine cannot recognize the document size correctly
● When the document size is smaller than set paper size, printing is performed in document
size. When you desire to prioritize paper size to be printed on, set document size OFF.
2. Touch “PROPERTY”.
3. Touch “EDIT”.
70
6. Touch document size to be used.
REFERENCE:
If you return to standard:
Use one of the following methods.
● Touch “DOCUMENT SIZE” and select “OFF”.
● Press the RESET key.
In this case, all settings are returned to standard
mode.
7. Touch “END”.
71
■ Special Function: Job Setting Memory
● Saving / Retrieving / Confirming the settings
You can save number of prints / number of sets / memory name / function settings /batch print,
sequential batch print. And you can retrieve the settings saved and perform master making
and printing.
Also, you can change number of prints / number of sets / memory name, and confirm function
settings when needed.
● Saving Settings
This mode enters number of prints and number of sets in the memory, and changes memory
name and sets function settings when needed and then save them. These settings are stored
in memory even when the power is turned OFF.
Memory Function
There are nine memories (MEMORY 1 – 9) in total.
Up to 90 sets of specified number of prints and sets can be collectively set.
IMPORTANT:
If memory name is blank, the memory cannot be saved.
Please enter memory name before saving.
Function Setting
The following settings are saved:
Print speed, print position, paper size, zoom ratio, document type, print darkness, multiple
printing, book shadow erasure, document size, 90° rotation
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
72
4. Touch “JOB SETTING MEMORY”.
6. Touch “SAVE/SET”.
REFERENCE:
If the setting is not saved, “RETRIEVE” and
“CLEAR” cannot be selected.
73
Entering Number of Prints / Sets
7. Entry screen for number of prints / number of sets
appears.
Enter the number of prints using the NUMERIC keys.
EXAMPLE:
Entering “3”, “ “, “3”, “ “ displays as shown on the
screen on the right.
REFERENCE:
If you make a mistake, touch the mistaken value and
enter correct value. When you change all values,
touch “ALL CLEAR”.
Function Setting
8. Touch “SWITCH”.
REFERENCE:
Touch the screen forward button in the lower right
corner of the screen. The next screen appears.
74
Changing Memory Name
1. Touch “CHANGE NAME”.
REFERENCE:
If the setting is not saved, “RETRIEVE” and “CLEAR”
cannot be selected.
75
● Retrieving Settings
You can retrieve the settings saved and perform master making and printing.
Also, you can add and change the data retrieved, and clear the number of prints / number of sets
in the memory retrieved, and multiply the number of sets by 2 - 5 when needed.
This change is temporally and changed setting is not saved.
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
REFERENCE:
Saved memories are prefixed with the M memory mark.
6. Touch “RETRIEVE”.
76
REFERENCE:
Touch the screen forward button in the lower right
corner of the screen. The next screen appears.
HINT:
If you touch “RETRIEVE” here, you will return to the
step 4.
Confirming Settings
7. Touch “SWITCH”.
Function settings saved appears.
REFERENCE:
Touch the screen forward button in the lower right
corner of the screen. The next screen appears.
IMPORTANT:
You cannot change the settings.
HINT:
If you touch “RETRIEVE” here, you will return to
the step 4.
77
Modifying Number of Prints/Number of Sets / Multiplying Number of Sets by 3 - 5
7. Touch “MODIFY”.
REFERENCE:
Touch the screen forward button in the lower right
corner of the screen. The next screen appears.
“ALL CLEAR” clears the number of print/number of
sets saved.
REFERENCE:
When the number of prints is 0, the number of sets
remains 1. When multiplied number of sets is over
99, the number of sets becomes 99.
9. Touch “OK”.
The screen in the step 4 appears.
78
● Clearing Settings
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
REFERENCE:
Saved memories are prefixed with the M memory mark.
6. Touch “CLEAR”.
The display changes.
79
■ Special Function: Paper Type
● Paper Type
IMPORTANT:
When AUTO is selected, changing feed pressure to high changes paper type to “HEAVY
WEIGHT” automatically.
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
REFERENCE:
When you return to standard mode:
Touch “PAPER TYPE” and select “STANDARD”.
80
■ Special Function: Double Feed Detection
● Double Feed Detection
This mode shows double feed of paper on the LCD panel when it occurs.
REFERENCE:
● Double feed is sometimes detected when the following paper is fed: colored print paper,
paper printed on both sides, reprinted paper, thick stock paper
● The machine with tape cluster (option) inserts the tape in the part where double feed was
detected if the tape cluster is set to “ON”.
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
5. Touch “ON”.
81
6. Touch “DOUBLE FEED DETECTION”.
Double feed detection is set.
HINTS:
● When double feed is not detected, increase
sensitivity.
● When double feed is wrongly detected, decrease
sensitivity.
7. Touch “END”.
REFERENCE:
When you return to standard mode:
Touch “DOUBLE FEED DETECTION” and select “OFF”.
82
■ Special Function: Narrow Paper
● Narrow Paper
This function is for printing narrow paper.
REFERENCE:
When you use this function, optional narrow paper kit is required.
You cannot use narrow paper which width is 50mm or smaller even with the optional kit.
IMPORTANT:
When you use this function, you cannot adjust print position (horizontal). Print position
should be 0.0mm.
When NARROW PAPER is ON, DOUBLE FEED DETECTION forcibly becomes OFF.
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
5. Touch “ON”.
NARROW PAPER is set.
83
6. Touch “END”.
REFERENCE:
When you return to standard mode:
Touch “NARROW PAPER” and select “OFF”.
84
■ Special Function: Replenishing Ink
● Replenishing Ink
This function forcibly replenishes ink to the drum when a new ink pack is installed.
2. Touch “SPECIAL”.
85
■ Special Function: Confidential Safeguard
● Confidential Safeguard
Confidential safeguard function, which prevents printing unless master making has been
competed, is a simple means of prohibiting others from printing sensitive documents.
IMPORTANT:
● When confidential safeguard function is ON, printing cannot be performed with the
PRINT key or TEST PRINT key. Other operations can be performed as normal.
● Turning the power OFF does not turn confidential safeguard function OFF.
● Once master making is carried out, confidential safeguard function is cleared.
● Master making still functions even if confidential safeguard function is ON.
● Document memory function is not available.
2. Touch “SPECIAL”.
4. Touch “CONFIDENTIAL”.
86
5. Touch “ON”.
“EJECT CURRENT MASTER AND PUT NEW BLANK
MASTER ON DRUM UNIT?” appears.
6. Touch “END”.
Initial screen appears.
87
■ Special Function: Document Darkness Detection
● Document Darkness Detection
IMPORTANT:
Master making with this function (DOC DARKNESS DETECTION: ON) requires more time
than that without this function (DOC DARKNESS DETECTION: OFF) in order to scan the
darkness of the entire document.
2. Touch “SPECIAL”.
88
5. Touch “ON”.
Document darkness detection is set.
6. Touch “RETURN”.
7. Touch “END”.
When you return to standard mode:
Touch “DOC DARKNESS DETECTION” and select
“OFF”.
89
■ Special Function: Batch Print
Sequential Batch Print
● Batch Print / Sequential Batch Print
● Batch Print
Only the specified number of sets is printed with the specified number of prints taken as one
set. You can enter up to 90 groups of number of prints x number of sets.
The machine with tape cluster (option) inserts the tape after each set of prints.
IMPORTANT:
Set “batch print” before starting master making.
IMPORTANT:
Set “sequential batch print” before starting master making.
90
How to Set Batch Print / Sequential Batch Print
2. Touch “PROPERTY”.
3. Touch “SPECIAL”.
7. Touch “END”.
Batch print or sequential batch print is set.
91
How to Enter the Numeric Values for Batch Print / Sequential Batch Print
8. Press “OK”.
IMPORTANT:
● The MASTER MAKING key will not work until
all the sets have been printed.
● Press the STOP key and then the CLEAR
key to abort the print run.
● You can also change setting of batch print/
sequential batch print on the
“ENTER PRINTS/SETS” screen.
● If you make a mistake, touch the mistaken value
and touch the CLEAR key and then enter value
again using the NUMERIC keys.
92
● Dividing Sections with Tape [Available only with Tape Cluster Unit]
Only the specified number of sets is printed with the specified number of prints taken as one set.
Paper tape is inserted when printing of each set is completed. You can enter up to 90 groups
of number of prints x number of sets.
IMPORTANT:
The optional tape cluster is required for dividing sections with tape.
When using this function, refer to the Instruction Manual for the “Tape Cluster”.
93
■ Peripheral Function: Online Mode
● Making Prints using Personal Computer
This function allows you to make prints of documents using personal computer.
“ONLINE MODE: AUTO”: You cannot print more sheets than you set.
“ONLINE MODE: MANUAL”: Printing stops at each time master making is finished when
making more than two masters on line. This enables you to
reprint more copies. To start master making/printing of more
than two documents, press the MASTER MAKING key.
Default setting is “AUTO”.
IMPORTANT:
When connecting with USB cable:
Use AB type USB cable with length of 3m or less. If you use the cable with length over
3m, master making may not be performed.
1. Touch “PROPERTY”.
2. Touch “PERIPHER”.
94
4. Selet “MANUAL”.
5. Touch “END”.
Online mode is changed.
95
■ Peripheral Function: Tape Cluster (Available only
with Tape Cluster Unit)
● Using Tape Cluster
This function selects the setting of the tape cluster.
ON : TAPE PRINT ON Æ “TAPE CLUSTER” is ON and number of prints/sets is printed on the
tape.
ON : TAPE PRINT OFF Æ “TAPE CLUSTER” is ON and nothing is printed on the tape.
OFF: Æ “TAPE CLUSTER” is OFF. Tape is not inserted.
1. Touch “PROPERTY”.
2. Touch “PERIPHER”.
5. Touch “RETURN”.
6. Touch “END”.
Tape cluster setting is changed.
96
■ Peripheral Function: Drum Size (Available onloy
with A3/A4 Drum)
●Drum Size
1. Touch “PROPERTY”.
2. Touch “PERIPHER”.
5. Touch “RETURN”.
6. Touch “END”.
Selected drum is set.
97
■ Setting Function: Initial Configuration
These defaults can be changed to make operation easier for user. Newly changed values
can be also returned to their defaults.
● Default setting
You can change Print speed / Paper size / Zoom / Image mode / Darkness / Document size.
● Memory 1 - 9
You can change Print speed / Paper size / Zoom / Print position / Multiple exposure /
Book shadow erasure / 90° rotation / Image mode / Darkness / Document size /
Number of sets/prints / Set name/ Batch print.
REFERENCE:
Defaults are when the power to the machine is turned ON or the RESET key is pressed.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
98
4. Touch “DEFAULT SETTING”.
6. Touch “OK”.
7. Touch “END”.
Default settings are changed.
REFERENCE:
When you select setting which is previously saved
in memory function, the setting can be set as default
setting.
99
■ Setting Function: Energy Save Mode
● How to Set Energy Save Mode
This function automat ically turns off the LCD panel when the LCD panel is not operated for a
specified period of time. (This reduces standby power consumption.)
The specified time period can be set between 1 to 99 minutes.
Default setting is “5 minutes”.
REFERENCE:
The machine returns to normal mode from energy save mode by pressing the ENERGY
SAVE key or any other keys and touching the LCD panel.
IMPORTANT:
Energy save mode does not function when the scanner cover is open.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
4. Touch “ON”.
6. Touch “OK”.
100
7. Touch “END”.
Default settings are changed.
101
■ Setting Function: Automatic Power OFF
● Automatic Power Off
This function automatically turns off the machine when the machine is not operated for a
specified period of time. The specified time period can be set between 1 to 99 minutes.
Default setting is “OFF”.
IMPORTANT:
Automatic power off setting and automatic reset setting cannot be “ON” simultaneously.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
4. Touch “ON”.
REFERENCE:
The value can be also entered using the NUMERIC keys.
6. Touch “OK
102
7. Touch “END”.
Automatic power off setting is changed.
103
■ Setting Function: Automatic Reset
● How to Set Automatic Reset
This function automatically resets the display (settings) on the control panel when the machine is
not operated for a specified period of time. The specified time period can be set between 1 to
99 minutes.
Default setting is “OFF”.
IMPORTANT:
Automatic reset setting and automatic power off setting cannot be “ON” simultaneously.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
4. Touch “ON.
REFERENCE:
The value can be also entered using the NUMERIC keys.
6. Touch “OK”.
104
7. Touch “END”.
Automatic reset setting is changed
105
■ Setting Function: Fine Start
● Fine Start
This function enables to make clear and vivid prints from the beginning of printing even when
the machine is not operated for a long time or the drum is replaced.
REFERENCE:
It may take longer than usual for the machine to perform master making in the following
cases:
● When a long time has passed after previous printing
● When the temperature is low
NOTES:
First a few prints may be light in the following cases even when Fine Start is ON:
● When master making and printing of small amount (20 sheets or less) are repeatedly
performed
● When “OUT OF BATTERY” is displayed
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
106
4. Touch the screen forward button in the lower right corner
of the screen.
5. Select setting.
“SET FOR EVERY MASTER MAKE” has two settings.
AUTO (STANDARD): Fine start functions according to
elapsed time.
AUTO (MINIMAL): Time for master making is shorter than
that in AUTO (STANDARD) setting.
The first image is lighter than that in
AUTO(STANDARD) setting.
6. Touch “RETURN”.
7. Touch “END”.
107
■ Setting Function: Optimize Print
● Optimize Print
This function is for adjusting the print darkness and speed according to room temperature to set
the best finish for the printed mode.
● Print temperature: 5 to 35 degrees (C)
● Print speed: 1 to 5
IMPORTANT:
● Set the print temperature to the room temperature.
● When OPTIMIZE PRINT is ON, print darkness switches to MANUAL by pressing the
RESET key with the power to the machine turned ON even default setting of
print darkness is AUTO.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
108
5. Touch “ON”.
REFERENCE:
TOP SPEED cannot be set.
8. Touch “OK”.
9. Touch “END”.
109
■ Setting Function: Preprint
● Preprint
This function disables counting a specified number of prints following the start of a printing
operation. For example, if you set the preprint mode to three (3) pages, the count function
ignores the first three pages printed, and starts counting from the forth printed page. You can
set 1 to 99. Default setting is “OFF”.
REFERENCE:
Pages ignored to be counted in preprint mode are counted to total number of prints.
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
4. Touch “PRE-PRINT”.
110
5. Touch “ON”.
REFERENCE:
The value can be entered using the NUMERIC keys.
7. Touch “OK”.
8. Touch “END”.
Default setting is changed.
111
■ Setting Function: Repeat Counter
● Repeat Counter
You can select either displaying number of prints on the LCD panel or displaying “0” after
printing completes.
2. Touch “SETTINGS”.
5. Touch “ON”.
Number of prints set is displayed after printing completes.
6. Touch “RETURN”.
112
7. Touch “END”.
Number of prints set is displayed after printing completes.
NOTE:
When the document is set in the ADF (Automatic
Document Feeder), number of prints is not “0” after
printing completes even REPEAT COUNTER is OFF.
113
■ Setting Function: Date & Time
● Date & Time
1. Touch “PROPERTY”.
2. Touch “SETTINGS”.
114
5. Touch “DATE & TIME”.
REFERENCE:
The value can be entered using the NUMERIC keys.
7. Touch “OK”.
Date and time are set.
8. Touch “END”.
115
■ Setting Function: Buzzer
● Buzzer
This function selects buzzer ON or OFF and sets volume of buzzer.
2. Touch “SETTINGS”.
116
6. Select buzzer setting.
● ON : STANDARD
Both key touching sound and error beep sound.
● ON : ERROR ONLY
Only error beep sounds.
Key touching sound does not sound.
● OFF
Neither key touching sound nor error beep sounds.
8. Touch “OK”.
9. Touch “END”.
117
■ Information
● Information
You can check total master make count, total print count, master roll replacement timing, and
used master disposal timing on the INFO screen.
1. Touch “INFO”.
TOTAL PRINT MAKE COUNT, TOTAL PRINT COUNT,
MASTER ROLL MONITOR, and USED MASTER
MONITOR are displayed.
118
Replacing Consumables
Use consumables such as master roll, ink pack and so on designed only for this machine.
Improper use of consumables may cause malfunction and/or trouble of the machine.
119
■ Replacing Ink Pack
● Replacing Ink Pack
The message “NO INK” is displayed on the LCD panel when the remaining ink is low.
Replace the ink pack according to the following procedure.
IMPORTANT:
● Use ink packs designed only for this machine.
● Be sure to set the ink pack. Do not operate the machine without an ink pack.
● Dispose of used ink pack carefully.
120
4. Insert the “ink pack” so that the “groove on the lip” fits
onto the ”U” groove of the “holder”.
121
■ Replacing Master Roll
● Replacing Master Roll
The message “NO MASTER” is displayed on the LCD panel when the master roll is used up.
Replace the master roll according to the following procedure.
IMPORTANT:
● Use a master roll designed only for this machine.
● Do not put anything heavy on the master roll box.
Master may be scratched and it causes the machine not to perform master making
normally.
● Do not leave the master roll taken out from the master roll box as it is.
Foreign materials may attach to the surface of the master and cause the machine not
to perform master making normally.
Keep the master out of direct sunlight, high/low temperature, and high/low humidity.
CAUTION:
Do not remove the cover affixed with Warning Label.
Personnel may be injured by the movable cutter
inside the machine.
IMPORTANT:
Do not touch the heat generator of thermal head.
Doing so may cause damages, leading to a
malfunction of master making.
122
4. Take out a “new master roll” from the bag.
7. Pull out the “master”, insert it under the “bar”, and align
its leading edge with the “set line”.
IMPORTANT:
If the master roll is not set correctly,
“SET MASTER ROLL PROPERLY” is displayed.
Open the master cover and gently press the
master in as far as possible to set again.
123
9. Slide the “scanner unit” to return it to its original position.
The master will be automatically pulled in.
124
■ How to Dispose of Used Masters
● How to Dispose of Used Masters
The message “REMOVE USED MASTER” is displayed on the LCD panel when the master
ejection core is full. Dispose of used masters wound onto the ejection core according to the
following procedure.
IMPORTANT:
● Use a master ejection core designed only for this machine.
● If you use a security master ejection box, please contact a manager.
IMPORTANT:
Ink adheres to the master ejection core (used master).
Take care to prevent ink from getting onto your clothing.
125
4. Insert the “master ejection core” after removing the core.
126
■ Replacing Drum Unit
● Replacing Drum Unit
● Avoid pressing and damaging the drum surface with fingers etc. It can stain your clothes,
and the warp in the drum surface may cause bad prints.
● Always place the drum unit on flat and stable surface. Otherwise, the drum surface may
be damaged or warped and may cause bad prints.
3. Pull out the “drum unit” towards you while holding the
“drum unit handle” until it comes to a stop.
4. Grip the “upper drum shaft” with your other hand, and
pull the drum out towards you while slightly lifting near
end of the “drum”.
127
■ Replacing Separator Unit
● Replacing Separator Unit
You can easily replace the separator unit (option) with the one having different hardness.
CAUTION
When you adjust separation pressure knob, make sure to remove the paper in the
paper tray and confirm that the tray stops at the bottom.
If you adjust at other positions, your finger or hands may get injured.
WARNING
Do NOT put hands near the side guides, feed rollers, slot holes on both side frames or
below the feed tray. Hands could get caught up or crushed.
2. Pull the “clip” on the right side of the right paper feed
roller towards you.
128
Troubleshooting
129
■ Troubleshooting
● If trouble occurs
If trouble occurs, find the same phenomenon and message in the following tables and deal with
it before contacting our service person.
If the problem still persists, then contact our service person.
130
● When messages appear
The LCD panel displays message, cause and solution. When message appears, follow the
instructions on the LCD display. Error messages are displayed in one of two ways, either by
text or by number.
131
Message Cause and Solution
NO USED MASTER CORE Cause: No used master core in the master ejection box.
Solution: Set a master ejection core.
NO DRUM Cause: A drum unit is not set.
Solution: Set a drum unit.
NO INK Cause: There is no ink.
Solution: Replace ink pack with a new one.
DRUM IS NOT IN POSITION Cause: The drum unit is not in position to be removed.
Solution: Set the drum unit and press the drum removal button.
CANNOT PRINT Cause: Cannot print.
Solution: This message is displayed if you press the PRINT
key or TEST PRINT key without making a master
immediately after a master setting error or when
confidential safeguard function is “ON”.
DOUBLE FEED Cause: Two or more sheets of paper are fed.
CHECK PAPER EJECTION Solution: Remove the double-fed paper.
If this occurs frequently, check “paper feed pressure”
and “separation pressure” after removing the paper.
Also, adjust detection sensitivity.
CALL SERVICE PERSON Cause: An error has occurred inside of the machine.
Solution: Take note of error code (EXXX).
Turn off the power and then turn on the power again.
If the problem still persists, turn off the power and
contact our service person. If contact information is
displayed in the LCD panel, follow it. Explain the error
code (EXXX) and details of the error to the service
person.
Machine with A3/A4 drum unit installed
Message Cause and Solution
A3 DRUM IS SELECTED Cause: A4 drum unit is installed.
CHANGE DRUM UNIT Solution: Change the drum unit setting to A4 drum unit or install
SETTING OR CHANGE TO A3 drum unit.
A3 DRUM UNIT
A4 DRUM IS SELECTED Cause: A3 drum unit is installed.
CHANGE DRUM UNIT Solution: Change the drum unit setting to A3 drum unit or install
SETTING OR CHANGE TO A4 drum unit.
A4 DRUM UNIT
Machine with keycard counter installed.
Refer to the Instruction Manual of the keycard counter for the details.
Message Cause and Solution
PLEASE INSERT CARD Cause: Keycard is not inserted.
Solution: Insert a department card in the keycard counter.
READOUT ERROR Cause: Readout of card failed.
Solution: Check inserting direction of the card and reinsert the
card.
132
Message Cause and Solution
CANNOT USE THIS CARD Cause: Different card is inserted.
Solution: Check the card and insert correct one.
CANNOT USE THIS CARD Cause: The card is write-protected.
Solution: Contact card manager.
Machine with tape cluster installed
Refer to the Instruction Manual of the tape cluster for the details.
Message Cause and Solution
TAPE CLUSTER EMPTY Cause: There is no tape.
Solution: Set a new tape.
CLOSE TAPE CLUSTER Cause: The tape cluster cover is open.
COVER Solution: Close the tape cluster cover.
Machine with CF card installed
Refer to the Instruction Manual of the CF card tape cluster for the details.
Message Cause and Solution
PLEASE INSERT CARD Cause: CF card is not inserted.
Solution: Insert CF card.
INSUFFICIENT MEMORY Cause: Memory of the CF card is not sufficient.
CAPACITY Solution: Delete the files on card or use other card.
DELETE FILES ON CARD
OR USE OTHER CARD
CANNOT OPEN FILES Cause: Data cannot be read.
CHECK IF THERE IS ANY Solution: Check if the data is saved.
FILE
FILE SAVING FAILED Cause: Data saving failed.
TRY AGAIN Solution: Save the data again.
CANNOT DELETE FILE Cause: DATA deleting failed.
CHECK IF THERE IS ANY Solution: Check if the data is saved.
FILE
CANNOT FORMAT THIS Cause: Card formatting failed.
CARD Solution: Use correct card.
CHECK CARD OR CHANGE
TO CORRECT CARD
Machine with automatic document feeder (ADF) installed
Message Cause and Solution
ADF PAPER JAM Cause: Paper jam has occurred in the ADF.
Solution: Removed the jammed paper.
CLOSE ADF COVER Cause: The ADF cover is open.
Solution: Close the ADF cover.
NO DOCUMENT IN ADF Cause: There is not document set in the ADF.
SET DOCUMENT Solution: Set document in the ADF.
133
■ When ‘PAPER JAM ON THE EJECTION SIDE’ is displayed
When a paper jams in the print tray side,’PAPER JAM ON THE EJECTION SIDE’is displayed
on the LCD panel.Follow the procedure below to remove the jammed paper.
IMPORTANT:
● Use a master ejection core designed only for this machine.
● If you use a security master ejection box, please contact a manager.
WARNING
Do not touch the drum or rollers when you operate the JOG
switch.
Do not put your hands or fingers inside the machine while it is
operating.Your hands may be pulled in or nipped. JOG switch
134
Maintenance
135
■ Daily Maintenance
● How to maintain the machine
Check the machine periodically to maintain its performance.
WARNING
● Before cleaning, be sure to turn the power off, wait
until the machine cools off and unplug the power
cord. Otherwise, fire or electric shock may occur.
● Never remove covers on the machine or modify
them.
Do not spill water or any liquid inside of the machine.
It may cause or fire or electric shock. If it happens,
contact our service person.
● Gently wipe off the dust on the glass with dry soft cloth.
● Gently wipe off the dust on the LCD panel with dry soft cloth. Never use wet cloth. It may cause
damage.
WARNING
● Never use alcohol or solvent cleaner. It may tarnish
or damage the exterior finish.
● Do not put diluted petroleum or insecticide.
It may cause fire.
Dust accumulation may cause the machine to malfunction. Clean it once a week.
Contact our dealer as for cleaning of inside of the machine.
136
Specifications / Service / Recycle Information
137
■ Specifications
Model name DP-S850
DP-S650 DP-S620 DP-S510
DP-S550 DP-S520
Model Floor stand model
Master making Thermal digital master making
method
Master making DP-S850 18 sec. (A4, 100%)
interval DP-S650 15 sec. (A4, 100%)
DP-S620 16 sec. (A4R, 100%)
DP-S550 18 sec. (A4, 100%)
DP-S520/ 20 sec. (A4R, 100%)
S510
Resolution DP-S850 Scan (input) resolution: 600 dpi x 600 dpi
(Pel path dir.) x Print (output) resolution: 600 dpi x 600 dpi
(line progression *(Master punch density: 600 dpi x 600 dpi)
dir.) (Master punch density: number of holes made on one master.)
DP-S650 Scan (input) resolution: 400 dpi x 400 dpi
DP-S620 Print (output) resolution: 400 dpi x 400 dpi
*(Master punch density: 400 dpi x 400 dpi)
DP-S550 Scan (input) resolution: 300 dpi x 600 dpi
DP-S520 Print (output) resolution: 300 dpi x 600 dpi
DP-S510 *(Master punch density: 600 dpi x 600 dpi)
Scanning method Flat bed scanner (ADF: optional)
Optional ADF 64 - 128gsm
Document weight
Optional ADF 100 sheets (64gsm), 85 sheets (20lb)(80gsm)
Capacity
Printing method Stencil print
Document type Sheets, book (max. weight: 10kg)
Document size Max. 297mm×432mm
(with optional ADF: Min. 100mm×148mm)
Scanning area 293mm×428mm
Image area (max.) 290mm×423mm 250mm×355mm 210mm×355mm
(11.4’ x 16.6’) (9.8’ x 13.9’) (8.2’ x 13.9’)
Feeding capacity 1,500 sheets (64gsm)
(1,280 sheets (20lb), 1,200 sheets (80gsm))
Height of 1,500 sheets loaded should not exceed 140mm.
Stacker tray Level position
Take back jogger
Ditched side guides
Stacker capacity 1,500 sheets (64gsm)
(1,280 sheets (20lb), 1,200 sheets (80gsm))
Paper size Max.: 297mm×432mm
(Main unit can feed/exit 320mm×450mm. Stacker tray does not cover paper
size larger than 297x432.)
138
Min.: 100mm×150mm
(50mm×150mm is possible with some limitations including no vertical
registration adjustment, paper lead sensor off, attaching plastic guide on
separator etc.)
Paper weight 53gsm - 210gsm (45kg-180kg)
13lb (Bond) – 110b (Index)
Feeding pressure adj. (3 steps)
Separator adj. (15 steps)
Print speed 45 - 130 ppm 5 steps + TOP speed 150 ppm
TOP speed: 150 ppm for B4/A4/letter/legal paper (not recommended for paper
larger than B4)
Restrictions in top speed:
* When printing on light weight paper, using TOP speed mode may cause
stacking failure.
* Registration may be slightly effected.
* TOP speed may cause creasing on some type of paper.
Zoom <A/B size spec>
100%
Preset reduction/enlargement: 70, 81, 86, 115, 122, 141%
Adjust X:Y Proportions 50 - 500%
Margin adjust 90 - 99%
Custom scaling: 50 - 500%
Auto zoom: 50, 57, 61, 70, 81, 86, 100, 115, 122, 141, (163), 173, (200)%
(Auto zoom: DP-S850/S650/S620 only)
((163%) and (200%) are available on the DP-S850/S650 only.)
Confidential safeguard
90° rotation
Initial setting (paper size when the power is turned on / print speed / document
mode / scan density / print density on booting)
Master re-make (save the data from last master making and remake master
without scanning)
Pre-print
Entry of sets & prints
Energy save mode (LCD turned off in 5 min.)
Automatic power off (power is turned off by time specified.)
Ink replenishing mode
Automatic reset
LAN-unit (optional)
(Warning: Parallel board in LAN-unit must not be connected with any other
devices.)
DP-RIP (optional)
IEEE1284 parallel interface is required separately.
Options Drum unit
A4/Letter drum
Tape cluster (TAP-11/TAP-13/TAP-14) (TAP-14 is for Korea only.)
141
KEY-05 Key card counter (built-in type)
Master box security lock
CF Editor
142
■ Information on Replacing Battery
143
■ MEMO
144
Reproduction prohibited
PRINTED IN JAPAN
145
DUPLO CORPORATION
R8-Y1001 2007.02
146