SYNERGY INSTITUTE OF ENGINEERING AND TECHNOLOGY,DHENKANAL
CIVIL ENGINEERING DEPARTMENT
Class test- 2 Sub- MOS Semester-3rd Time-1hr
Q1. Answer all the questions.
(1×5) a) Define thermal stress. b) What is mean by Mohr’s Circle for a 2-dimensional stress system? c) Define bulk modulus. d) Write down the relationship between E,C & K . e) Define principal plane & principal stress.
Q2. Answer any two. (5×2)
a) Derive an expression to find thermal stresses in composite section bar.
b) A steel rod 5m long and 30mm in diameter is subjected to an axial tensile load of 50kN.Dtermine the change in length,diameter,volume of the rod.Take E=2x105 N/mm2 & poisson’s ratio=0.25. c) Derive expressions for Normal & tangential stress for a member subjected to direct stresses in two mutually perpendicular direction accompanied by a simple shear stress by analytical method..
SYNERGY INSTITUTE OF ENGINEERING AND TECHNOLOGY,DHENKANAL
CIVIL ENGINEERING DEPARTMENT Class test- 2 Sub- MOS Semester-3rd Time-1hr
Q1. Answer all the questions.
(1×5) a) Define thermal stress. b) What is mean by Mohr’s Circle for a 2-dimensional stress system? c) Define bulk modulus. d) Write down the relationship between E,C & K . e) Define principal plane & principal stress.
Q2. Answer any two. (5×2)
a) Derive an expression to find thermal stresses in composite section bar.
b) A steel rod 5m long and 30mm in diameter is subjected to an axial tensile load of 50kN.Dtermine the change in length,diameter,volume of the rod.Take E=2x10 5 N/mm2 & poisson’s ratio=0.25. c) Derive expressions for Normal & tangential stress for a member subjected to direct stresses in two mutually perpendicular direction accompanied by a simple shear stress by analytical method..