You are on page 1of 3

I initially came across this idea a few years ago when I was using some materials provided by Upd8

(Science ASE Resource) and


then again when teaching WIKID, a KS3 Science scheme of work.
I have since found out that the The 7es was an extension of the 5E Constructivist learning cycle first created by Rodger Bybee
when developing the Biological Science Curriculum Study (BSCS) in America. See link for their work
Whilst the original concept was never meant to be a 5 or 7-part lesson I have personally found that using the 5E/ 7Es provided a
clear, rational framework for designing individual Science lessons as well as schemes of learning. I tend to use all seven stages in a
lesson but this depends on the complexity of the subject matter I am teaching. Sometimes it may take more than one lesson to
complete the cycle.

See below cycle (from upd8 WIKID)


So what is it? The 7 Es stand for the following. Elicit, Engage, Explore, Explain, Elaborate, Extend and Evaluate. The following
explanation is my take on the 7Es that has been adapted from the BSCS 5E Engage, explore, explain, elaborate, evaluate.

“Elicit”. Here you can find out what the students know (prior knowledge). This can be done in a variety of ways, such as “Quick
Quizzes, MCQs, Post-it notes, mini whiteboards etc. This is also a good opportunity to deal with student’s misconceptions or
test material that you have visited previously that is needed to understand the lesson. So for example in a Science lesson, where a
student might be investigating whether light is needed for photosynthesis I would test knowledge of photosynthesis, respiration
and the starch test as part of my quick quiz.

The next stage is the “Engage” stage. In this stage you want to engage interest and curiosity, raise “The BIG questions” and
introduce new learning through teacher explanation modelling. Following on from the example above I might ask. “Do plants need
light to make food?” I might give them a brief explanation or some information about photosynthesis to help them make a
prediction OR to support the explore stage.

During the “Explore” stage, pupils should be given opportunities to work together following the initial teacher input to
solve/explore problems, building concepts through firsthand experience. (This stage is independent of you, their teacher but may
involve scaffolds depending on the complexity of the task). As the teacher, you should set up the task, but then become the
facilitator, helping students by asking questions and observing. Again referring to the science example above pupils would then
undertake some practical investigative work to answer the big question. NB Depending on the group and to reduce cognitive load I
might break up the practical guidance into several steps.

Following the explore stage I would next go onto the “Explain” stage of the lesson. During this stage I would use what students
had discovered to help them build the concept/knowledge further. This would involve checking and asking questions. Using their
knowledge gained from experience to develop the concepts further. So again, using the science example above, the teacher would
draw out the findings from the experiment and ask students to compare to predictions. Using deep questioning and also
explanation/modelling the teacher builds the scientific explanation.
The next stage is the stage that will be KEY in assessing their progress, knowledge and understanding. This stage is “Elaborate”
Students may work independently during this stage to demonstrate learning. This is where students formalize and apply their
learning. At this stage the scaffolds are removed. Students would be involved in independent practice. Using the example above
the students would answer the big question. Does a plant need light to make food? Explain why using your evidence and scientific
knowledge.

In some cases, you may require an additional “Extend” stage to challenge all learners. In this stage you are encouraging the
students to apply or extend the concepts and skills in new situations. Students make connections not just in the subject/ideas
studied but also beyond it. They are able to apply ideas/generalize and transfer principles. This might involve students explaining
how they might test if chlorophyll was needed got photosynthesis or interpreting data from other similar experiments.

While it is expected that evaluation will continue throughout the process, the evaluate section is the section where you the
teacher evaluate the learning that has occurred. This might involve peer/self-assessment or marking. It might involve questioning
or quick low stage quizzing to establish understanding of the concepts. This should also include self-reflection and evaluation from
the student.

Lesson Plan-Ease of planning

As an AST and SLE I have used this planning method a lot, particularly when coaching. Again I have found that is has often had
major impact on teaching and learning and on lesson observation outcomes. I passionately believe that this structure is not just
relevant to Science but to is also useful to other subjects too. Below are a couple of resources that I think will help you if you are
trialing this method for the first time.

explore-The E’s of lesson planning– This is a PowerPoint that has a few ideas for the type of thing you might do for each of the
Es’

#7ePlan [1] This is a planning template, that will help with the structure of you lesson. (Any questions just ask) Editable version
of the E plan Lesson plan #ease of lesson planning

This is an example of it in use for Science lessons. This lesson was also graded at OUTSTANDING. Lesson Plan_ 5 OBS

For other information, these bloggers are also good sources.


Elicit
Engage
Explore
Explain
Elaborate
Extend
Evaluate

You might also like