Professional Documents
Culture Documents
1) First, paint your paper plate with the yellow paint. Make
sure the whole plate is coated completely.
Paint around the rim of the paper plate with the gold paint.
Allow the paint to dry.
3) Add dabs of glue around the rim of the plate and place
the craft shapes on top into a pattern.
Allow the glue to dry.
4) Turn the paper plate over and spread glue at the base of
the plate.
Place the ends of the ribbons over the glue so that the ends
trail down underneath the plate.
Allow the glue to dry.
Crafts page 1
5) On the back of the paper plate, place a safety pin in
position and secure it with a piece of sticky tape.
This will now be able to be worn as a badge.
We hope this information on this resource is helpful. However, some ingredients and/or materials used might cause allergic reactions, so if you have
concerns about your own or somebody else’s health or wellbeing, always speak to a qualified health professional. Remember, activities listed within the
resource should always be supervised by an appropriate adult.
Crafts page 2