Professional Documents
Culture Documents
Captainghostly Pattern - Jaw
Captainghostly Pattern - Jaw
Very easy but effective system to make an articulating jaw for your costume. I recommend cutting
these out of paper first to check if the length works for your head and project.
TUTORIAL
https://www.instagram.com/p/Cq-zJROuGRe/
MATERIALS NEEDED
1) Hard material for the hinge itself (for example hard carboard, wood, acrylic, ...)
2) 6x Chicago screws (length 15mm M10)
3) 2x Rubber bands (length 17cm)
SCALE
This document is made in A4 format. You might need to change printer settings
depending on your location. To test your printed pattern, this square should
measure 1cm x 1cm.
Part A (4x)
@CAPTAINGHOSTLY