Professional Documents
Culture Documents
2016 LEAF Owner Manual
2016 LEAF Owner Manual
2016 L EAF
OWNER’S MANUAL
ZEO-D
Printing : July 2015 (14)
Publication No.: OM16EA
0C11U0 0ZE0U0 For your safety, read carefully and keep in this vehicle.
Printed in U.S.A. '16 ZEO-D
FOREWORD READ FIRST — THEN DRIVE SAFELY
Welcome to the growing family of new NISSAN In addition to factory installed options, your ve- Before driving your vehicle, read your Owner’s
owners. This vehicle is delivered to you with hicle may also be equipped with additional ac- Manual carefully. This will ensure familiarity with
confidence. It was produced using the latest cessories installed by NISSAN or by a NISSAN controls and maintenance requirements, assist-
techniques and strict quality control. certified LEAF dealer prior to delivery. It is impor- ing you in the safe operation of your vehicle.
This manual was prepared to help you under- tant that you familiarize yourself with all disclo-
stand the operation and maintenance of your sures, warnings, cautions, and instructions con-
WARNING
vehicle so that you may enjoy many miles of cerning proper use of such accessories prior to
operating the vehicle and/or accessory. See a IMPORTANT SAFETY INFORMATION RE-
driving pleasure. Please read through this manual
NISSAN certified LEAF dealer for details con- MINDERS!
before operating your vehicle. Follow these important driving rules to
cerning the particular accessories with which
A separate Warranty Information Booklet your vehicle is equipped. help ensure a safe and comfortable trip
explains details about the warranties cov- for you and your passengers!
ering your vehicle. The NISSAN Service and A NISSAN certified LEAF dealer knows your • NEVER drive under the influence of
vehicle best. When you require any service or alcohol or drugs.
Maintenance Guide explains details about
have any questions, we will be glad to assist you • ALWAYS observe posted speed limits
maintaining and servicing your vehicle. Ad- and never drive too fast for conditions.
ditionally, a separate Customer Care/ with the extensive resources available to us.
• ALWAYS give your full attention to
Lemon Law Booklet (U.S. only) will explain driving and avoid using vehicle fea-
how to resolve any concerns you may have tures or taking other actions that could
with your vehicle, as well as clarify your distract you.
rights under your state’s lemon law. • ALWAYS use your seat belts and ap-
propriate child restraint systems. Pre-
teen children should be seated in the
rear seat.
• ALWAYS provide information about
the proper use of vehicle safety fea-
tures to all occupants of the vehicle.
• ALWAYS review this Owner’s Manual
for important safety information.
WHEN READING THE MANUAL
MODIFICATION OF YOUR VEHICLE This manual includes information for all features IMPORTANT INFORMATION ABOUT
and equipment available on this model. Features THIS MANUAL
This vehicle should not be modified. and equipment in your vehicle may vary depend-
You will see various symbols in this manual. They
Modification could affect its perfor- ing on model, trim level, options selected, order,
mance, safety or durability, and may are used in the following ways:
date of production, region or availability. There-
even violate governmental regulations. fore, you may find information about features or
In addition, damage or performance equipment that are not included or installed on WARNING
problems resulting from modification your vehicle.
may not be covered under NISSAN war- This is used to indicate the presence of a
ranties. All information, specifications and illustrations in hazard that could cause death or serious
this manual are those in effect at the time of print- personal injury. To avoid or reduce the
ing. NISSAN reserves the right to change specifi- risk, the procedures must be followed
cations, performance, design or component sup- precisely.
pliers without notice and without obligation. From
time to time, NISSAN may update or revise this
CAUTION
manual to provide Owners with the most accurate
information currently available. Please carefully This is used to indicate the presence of a
read and retain with this manual all revision updates hazard that could cause minor or moder-
sent to you by NISSAN to ensure you have access ate personal injury or damage to your
vehicle. To avoid or reduce the risk, the
to accurate and up-to-date information regarding
procedures must be followed carefully.
your vehicle. Current versions of vehicle Owner’s
Manuals and any updates can also be found in the
Owner section of the NISSAN website at
https://owners.nissanusa.com/nowners/
navigation/manualsGuide. If you have ques-
tions concerning any information in your Owner’s
Manual, contact NISSAN Consumer Affairs. See
the NISSAN CUSTOMER CARE PROGRAM page
in this Owner’s Manual for contact information.
CALIFORNIA PERCHLORATE
ADVISORY
Some vehicle parts, such as lithium batter-
Arrows in an illustration that are similar to those
ies, may contain perchlorate material. The
above call attention to an item in the illustration.
following advisory is provided: “Perchlorate
[ ]: Indicates a key/item displayed on the screen. Material - special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
CALIFORNIA PROPOSITION 65
Bluetooth® is a trademark
WARNING owned by Bluetooth SIG, Inc.
and licensed to Visteon.
WARNING SiriusXM® services require a
subscription after trial period
Certain vehicle components contain or and are sold separately or as
emit chemicals known to the State of a package. The satellite ser-
If you see the symbol above, it means “Do not do California to cause cancer and birth de- vice is available only in the
this” or “Do not let this happen”. fects or other reproductive harm. In addi- 48 contiguous USA and DC.
tion, certain fluids contained in vehicles SiriusXM satellite service is
and certain products of component wear also available in Canada; see
contain or emit chemicals known to the www.siriusxm.ca.
State of California to cause cancer and
If you see a symbol similar to those above in an birth defects or other reproductive harm.
illustration, it means the arrow points to the front
of the vehicle. © 2015 NISSAN MOTOR CO., LTD.
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a retrieval
system, or transmitted in any form, or by any
Arrows in an illustration that are similar to those means, electronic, mechanical, photocopying,
above indicate movement or action. recording or otherwise, without the prior written
permission of Nissan Motor Co., Ltd.
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES ...
Both NISSAN and your NISSAN certified LEAF dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your
NISSAN certified LEAF dealer are our primary concerns. Your NISSAN certified LEAF dealer is always available to assist you with all your automobile sales
and service needs.
However, if there is something that your NISSAN The Consumer Affairs Department will ask for the You can write to NISSAN with the information at:
certified LEAF dealer cannot assist you with or following information:
For U.S. customers
you would like to provide NISSAN directly with • Your name, address, and telephone number Nissan North America, Inc.
comments or questions, please contact the • Vehicle identification number (attached to the Consumer Affairs Department
NISSAN Consumer Affairs Department using our top of the instrument panel on the driver’s side) P.O. Box 685003
toll-free number: Franklin, TN 37068-5003
• Date of purchase
or via e-mail at:
For U.S. customers • Current odometer reading nnaconsumeraffairs@nissan-usa.com
1-877-NOGASEV
• Your NISSAN certified LEAF dealer’s name For Canadian customers
(1-877-664-2738)
• Your comments or questions Nissan Canada Inc.
For Canadian customers
5290 Orbitor Drive
1-800-387-0122 OR Mississauga, Ontario L4W 4Z5
or via e-mail at:
information.centre@nissancanada.
com
If you prefer, visit us at:
www.nissanusa.com (for U.S. customer) or
www.nissan.ca (for Canadian customers)
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Table of Illustrated table of contents 0
contents EV Overview EV
Charging CH
Safety–Seats, seat belts and supplemental restraint system 1
Instruments and controls 2
Pre-driving checks and adjustments 3
Display screen, heater, air conditioner, audio and phone systems 4
Starting and driving 5
In case of emergency 6
Appearance and care 7
Maintenance and do-it yourself 8
Technical and consumer information 9
Index 10
0 Illustrated table of contents
1. Side vents (P. 4-22) 4. Hazard warning flasher switch (P. 6-2)
2. Meters and gauges (P. 2-5) 5. Center vents (P. 4-21)
3. Center multi-function control panel 6. Rear window defroster switch (P. 2-41)
— Navigation system (Refer to LEAF Naviga- 7. Front passenger supplemental air bag
tion System Owner’s Manual) (P. 1-38)
— Without navigation system (P. 4-38) 8. Glove box (P. 2-51)
9. Heater and air conditioner control (P. 4-22)
0-8 Illustrated table of contents
METERS AND GAUGES
This vehicle is equipped with an upper display
and a lower display.
1. Master warning lights (P. 2-18)
2. ECO indicator (P. 2-10)
3. Speedometer (P. 2-6)
4. Clock (P. 2-11)
5. Outside air temperature (P. 2-10)
6. Turn signal/Hazard indicator light (P. 2-21)
7. Li-ion battery capacity level gauge (P. 2-10)
8. Li-ion battery available charge gauge
(P. 2-9)
9. Driving range (P. 2-8)
10. Vehicle information display (P. 2-22)
11. READY to drive indicator light (P. 2-20)
12. ECO mode indicator light
—ECO switch (P. 2-47)
— Odometer/twin trip odometer (P. 2-6)
— Trip computer (P. 2-27)
— Shift “P” warning (P. 2-26)
— Indicator for timer (P. 2-35)
13. Power meter (P. 2-7)
14. Warning and indicator lights (P. 2-12)
15. Li-ion battery temperature gauge (P. 2-6)
EV-2 EV Overview
NOTE: • The Li-ion battery has a limited service The vehicle’s range is very limited when these
• If the outside temperature is −13°F life. Contact a NISSAN certified LEAF warning lights illuminate and messages are dis-
(−25°C) or less, the Li-ion battery may dealer for information about recycling or played. Follow the instructions on the navigation
freeze and it cannot be charged or provide disposal of the Li-ion battery. Do not at- screen (models with navigation system) and im-
power to run the vehicle. Move the vehicle tempt to recycle or dispose of the Li-ion mediately charge the vehicle at the nearest
to a warm location. battery yourself. charging station.
• The capacity of the Li-ion battery in your DRIVING WITH A DISCHARGED
vehicle to hold a charge will, like all such LI-ION BATTERY
batteries, decrease with time and usage.
As the battery ages and capacity de- When a destination is set in the navigation sys-
creases, this will result in a decrease from tem that exceeds the available vehicle range, the
the vehicle’s initial mileage range. This is navigation system automatically searches the lo-
normal, expected, and not indicative of cation of nearby charging stations. When the
any defect in your Li-ion battery. NISSAN nearby charging station locations are displayed,
estimates that battery capacity will be ap- charge the Li-ion battery as soon as possible
proximately 80% of original capacity after (models with navigation system).
five years, although this is only an esti- Warning lights illuminate on the instrument panel
mate, and this percentage may vary (and and messages are displayed on the vehicle infor-
could be significantly lower) depending mation display to inform you that the Li-ion bat-
on individual vehicle and Li-ion battery tery charge is low. Instructions are also displayed
usage. on the navigation system screen to direct you to
• The Li-ion battery has limited service life, nearby charging stations (models with navigation
and when its charging capacity falls below system).
a specific level, the EV system warning
light will illuminate. Owners should bring
their vehicle in for inspection and possible
battery replacement.
EV Overview EV-3
on the vehicle information display at the same
time to indicate low Li-ion battery charge:
• The low battery charge warning light
• The master warning light
• “Li-ion battery level is Low” warning message
is displayed on the vehicle information dis-
play
• For additional information, refer to “Li-ion
battery low charge warning” in the “Instru-
ments and controls” section of this manual.
• Messages are displayed on navigation sys-
tem screen (if so equipped)
NOTE:
Due to traffic conditions, it may be diffi-
cult to get to the charging station sug-
gested by the navigation system. If the
Li-ion battery is almost completely dis-
charged, drive directly to the nearest
charging station (models with naviga-
There are three levels of information that will be tion system).
displayed as the Li-ion battery becomes dis-
charged:
1. The following warning lights illuminate on the
instrument panel and messages are displayed
EV-4 EV Overview
hicle. Contact Roadside assistance service While the vehicle is not in use
shown in your NISSAN Warranty Information
When the EV (Electric Vehicle) system is off for
Booklet. For additional information, refer to “If
an extended time, the 12-volt battery may be
the Li-ion battery becomes completely dis-
automatically charged for a short period of time
charged” in the “In case of emergency” sec-
on a regular basis.
tion of this manual.
LI-ION BATTERY WARMER (IF SO
CHARGING THE 12-VOLT BATTERY
EQUIPPED)
The 12-volt battery is charged automatically us-
ing electricity stored in the Li-ion battery.
CAUTION
When the 12-volt battery is being charged, the
charge status indicator light on the instrument The Li-ion battery warmer does not oper-
ate if the available Li-ion battery charge
panel flashes (except when charging the Li-ion
is less than approximately 30% and the
battery or the power switch is in the READY to charger is not connected to the vehicle.
2. If the vehicle is driven and the Li-ion battery drive position). For additional information, refer to To help prevent the Li-ion battery from
continues to discharge, the driving range on “Charge status indicator lights” in the “Charging” freezing, do not leave the vehicle in an
the instrument panel changes to “—-” 䊊 2 .
section of this manual. environment if temperatures may go be-
low -1°F (-17°C) unless the vehicle is con-
Messages are displayed on the Navigation Sys-
While vehicle is driven nected to a charger.
tem screen (if so equipped). For additional infor-
mation, refer to “Low battery warning” in the “In- The Li-ion battery charges the 12-volt battery as The Li-ion battery warmer helps to prevent the
struments and controls” section of this manual. necessary when the power switch is in the Li-ion battery from freezing and helps to prevent
READY to drive position or ON position. significant reductions in the Li-ion battery output
3. When the power limitation indicator light
illuminates, traction motor output is lim- The 12-volt battery is not charged in the following when the temperature is cold. The Li-ion battery
ited resulting in reduced vehicle speed. Stop conditions. warmer automatically turns on when the Li-ion
the vehicle in a safe location before the Li-ion battery temperature is approximately -1°F
• When the power switch is in the ACC position.
battery becomes completely discharged and (-17°C) or colder. The Li-ion battery warmer au-
• When the power switch is in the ON position and tomatically turns off when the Li-ion battery tem-
there is no power available to drive the ve- the shift position is in the N (Neutral) position. perture is approximately 14°F (-10°C) or higher.
EV Overview EV-5
The Li-ion battery warmer uses electrical power • The Li-ion battery warmer uses Li-ion bat- • Climate control performance is reduced
from an external source when a charger is con- tery power to operate, even if the vehicle when using the Climate Ctrl. Timer or Re-
nected to the vehicle. The Li-ion battery warmer is connected to a charger when: mote Climate Control (models with navi-
uses electrical power from the Li-ion battery – the vehicle’s power switch is in the ON gation system) while the Li-ion battery
when the charger is not connected to the vehicle. position. warmer operates.
– there is no electrical power being sup- • The Li-ion battery may not charge to the
NOTE: plied to the charging equipment. expected level using the charging timer
• Connect the charger to the vehicle and • When the Li-ion battery warmer is already when [Start Time] (models with navigation
place the power switch in the OFF posi- in operation using an external power system) and [End Time] are set while the
tion when parking the vehicle if tempera- source, it will continue to use the external Li-ion battery warmer operates.
tures may go below -1°F (-17°C). This pro- power even if the power switch is placed • Set the Charging Timer [End Time] when
vides external power to the Li-ion battery in the ON position. charging in cold weather. The vehicle au-
warmer when it operates and does not
• Vehicle driving range is reduced if the tomatically determines when to start
discharge the Li-ion battery.
Li-ion battery warmer operates (Li-ion charging to fully charge the Li-ion battery,
• The charging status indicator lights illumi- battery temperature approximately -1°F even if the Li-ion battery warmer operates.
nate in a specific pattern when the Li-ion (-17°C) or colder) while driving the vehicle. Charging ends before the set end time if
battery warmer operates. The charging You may need to charge the Li-ion battery the Li-ion battery is fully charged.
status indicator lights use the same pat- sooner than in warmer temperatures.
tern to indicate 12-volt battery charging,
• The Li-ion battery requires more time to
Climate Ctrl. Timer operation or Remote
charge when the Li-ion battery warmer
Climate Control operation (models with
operates.
navigation system). The charging status
indicator lights do not change if the Li-ion • The predicted charging time displayed on
battery warmer operates at the same time the meter and navigation system (models
as the above features. For additional in- with navigation system) increases when
formation, refer to “Charge status indica- the Li-ion battery warmer operates.
tor lights” in the “Charging” section of this
manual.
EV-6 EV Overview
HIGH VOLTAGE PRECAUTIONS
HIGH-VOLTAGE COMPONENTS
WARNING
• The EV (Electric Vehicle) system uses
high voltage up to approximately DC
400 volt. The system can be hot during
and after starting and when the vehicle
is shut off. Be careful of both the high
voltage and the high temperature. Fol-
low the warning labels that are at-
tached to the vehicle.
• Never disassemble, remove or replace
high-voltage parts and cables as well
as their connectors because they can
cause severe burns or electric shock
that may result in serious injury or
death. High-voltage cables are colored
orange. The vehicle high voltage sys-
tem has no user serviceable parts.
Take your vehicle to a NISSAN certified
LEAF dealer for any necessary mainte-
nance.
1. Traction motor and reduction gear 4. High-voltage wire harnesses (colored orange)
2. Traction motor inverter 5. Li-ion battery
3. Power delivery module (PDM) (Charger, 6. Service plug
DC/DC Converter, Junction Box)
EV Overview EV-7
ROAD ACCIDENT PRECAUTIONS
• Leaks or damage to the Li-ion battery • If you are not able to safely assess the
WARNING may result in a fire. If you discover vehicle due to vehicle damage, do not
In case of a collision: them, contact emergency services im- touch the vehicle. Leave the vehicle
• If your vehicle is drivable, pull your mediately. Since the fluid leak may be and contact emergency services. Ad-
vehicle off the road, push the P (Park) lithium manganate from the Li-ion bat- vise first responders that this is an
position switch on the shift lever, apply tery, never touch the fluid leak inside electric vehicle.
the parking brake and turn the EV or outside the vehicle. If the fluid con- • In the event of an accident that re-
(Electric Vehicle) system off. tacts your skin or eyes, wash it off quires body repair and painting, the
• Check your vehicle to see if there are immediately with a large amount of vehicle should be delivered to a
exposed high-voltage parts or cables. water and receive immediate medical NISSAN certified LEAF dealer to have
For their locations, refer to “High volt- attention to help avoid serious injury. the Li-ion battery pack and high volt-
age components” in this section. To • If a fire occurs in the EV (Electric Ve- age parts such as the inverter, includ-
avoid personal injury, never touch hicle), leave the vehicle as soon as ing the wiring harness, removed prior
high-voltage wiring, connectors, and possible. Only use a type ABC, BC or C to painting. Li-ion battery packs ex-
other high-voltage parts, such as in- fire extinguisher that is meant for use posed to heat in the paint booth will
verter unit and Li-ion battery. An elec- on electrical fires. Using a small experience capacity loss. Damaged Li-
tric shock may occur if exposed electric amount of water or the incorrect fire ion battery packs may also pose safety
wires are visible when viewed from extinguisher can result in serious in- risks to untrained mechanics and re-
inside or outside of your vehicle. jury or death from electrical shock. pair personnel.
Therefore, never touch exposed elec- • If your vehicle needs to be towed, do it
tric wires. with the front wheels raised. If the
• If the vehicle receives a strong impact front wheels are on the ground when
to the floor while driving, stop the ve- towing, the traction motor may gener-
hicle in a safe location and check the ate electricity. This may damage the
floor. components of the EV (Electric Ve-
hicle) system and cause a fire.
EV-8 EV Overview
EV (ELECTRIC VEHICLE)
CHARACTERISTICS
EMERGENCY SHUT-OFF SYSTEM NOTE:
The emergency shut-off system is activated and WARNING • The vehicle cannot run with a discharged
the high-voltage system automatically turns off in • Pay special attention to pedestrians. Li-ion battery. Repeated acceleration con-
the following conditions: Because there is no engine noise, pe- sumes more power from the Li-ion battery
destrians may not know the vehicle is than driving at a steady speed.
- Front and side collisions in which the air bags approaching, moving or about to • This vehicle is equipped with a regenerative
are deployed. move, and may step into the path of brake system. The primary purpose of the
- Certain rear collisions. vehicle travel.
regenerative brake system is to provide
• When leaving the vehicle, be sure to
- Certain EV (Electric Vehicle) system malfunc- turn off the EV (Electric Vehicle) sys- some power to recharge the Li-ion battery
tions tem. and extend driving range. A secondary ben-
• Be sure to push the P (Park) position efit is “engine braking” that operates based
For the above collisions and certain other EV
switch on the shift lever and apply the on Li-ion battery conditions.
system malfunctions, the READY to drive indica- parking brake when parking because
tor light will turn off. For additional information, • In the D (Drive) position, when the accelera-
the vehicle can move when the READY tor pedal is released, the regenerative
refer to “Warning lights, indicator lights and au- to drive indicator light is ON. When the
dible reminders” in the “Instruments and con- brake system provides some deceleration.
READY to drive indicator light is ON,
trols” section of this manual. do not leave your vehicle in a shift • When you put the shift lever in the B
position other than the P (Park) posi- position and take your foot off the accel-
The emergency shut-off activates for the above
tion. erator pedal, more regenerative brake is
collisions to minimize risk of an event that could • Keep the brake pedal depressed until applied than in the D (Drive) position.
cause injury or an accident. If the emergency shut- you are ready to drive. When the ve-
off system activates, the EV system may not be hicle is in the D (Drive) position, B or R
switched to the READY to drive position; contact a (Reverse) position, if you release the
NISSAN certified LEAF dealer. Even if the power brake pedal and do not depress the
switch is switched to the READY to drive position, accelerator, the vehicle will creep and
the system may shut-off suddenly. Therefore, drive may start abruptly. This may cause se-
cautiously to the nearest NISSAN certified LEAF rious injury or death.
dealer or contact a NISSAN certified LEAF dealer
as soon as possible.
EV Overview EV-9
LIFE WITH AN EV (SCENE GUIDE)
• Less deceleration is provided by the re- NOISE AND VIBRATION This section provides a brief explanation for the
generative brake system when the Li-ion most important LEAF functions. For additional
You might experience the following noise or vi-
battery is fully charged. The regenerative information, refer to the specific sections of this
bration as a normal characteristic of this vehicle.
brake is automatically reduced when the manual for detailed explanations of the vehicle
Li-ion battery is fully charged to prevent • Traction motor noise from the motor features and operation.
the Li-ion battery from becoming over- compartment.
charged. The regenerative brake is also • Water pump and radiator fan noise while CHARGING THE LI-ION BATTERY
automatically reduced when the battery charging.
temperature is high/low (indicated by the • Compressor and radiator fan noise when the WARNING
red/blue zones on the Li-ion battery tem- Climate Ctrl. Timer or remote climate control
perature gauge) to prevent Li-ion battery (models with navigation system) is used. The EV (Electric Vehicle) system uses a
damage. high voltage current. Failure to follow the
• Relay operation noise and vibration at start-up proper handling instructions may cause
• The brake pedal should be used to slow or and shut-down of the EV (Electric Vehicle) sys- serious injury or death. Be sure to read
stop the vehicle depending on traffic or tem (power switch placed in the ON and OFF the “Charging” section and follow the
road conditions. The vehicle brakes are position). procedures and guidelines described.
not affected by the regenerative brake • Approaching Vehicle Sound for Pedestrians
system operation. (VSP).
EV-10 EV Overview
EV Overview EV-11
EV-12 EV Overview
– The internet enabled cellular phone or
smart phone must be located in a cel-
lular phone or smart phone coverage
area.
– The computer must be connected to
the internet.
– A cellular phone must be used to com-
municate with the vehicle.
– A cellular phone capable of text mes-
saging must be used to receive text
message regarding vehicle charge sta-
tus.
• The remote heater and cooler can adjust
the in-cabin temperature.
BEFORE DRIVING YOUR VEHICLE screen, heater, air conditioner, audio and phone sys- • When the charge connector is discon-
(MODELS WITH NAVIGATION tems” section of this manual. nected from the vehicle, the heater and air
SYSTEM) NOTE: conditioner operates using vehicle Li-ion
The Li-ion battery charging status and the Li-ion battery electric power.
• To check the Li-ion battery charging status
battery warmer (if so equipped) operation can be or to use the remote heater and air condi- • If the remote heater and air conditioner
checked using an internet enabled smart phone or tioner using an internet enabled smart function and Li-ion battery charging are
personal computer at home. You may also choose to phone or personal computer, the follow- performed at the same time, Li-ion battery
have SMS messages (text messages) sent to a cel- ing conditions must be met: charging will take longer than usual due
lular phone. Additionally, the heater and air condi- – The vehicle must be located in a cellu- to the power used to heat or cool the
tioner of the vehicle can be set to operate using the lar phone or smart phone coverage vehicle.
Climate Ctrl. Timer function or A/C-heater remote area.
function, if necessary. For additional information, re-
fer to “Remote climate control” in the “Display
EV Overview EV-13
Checking Li-ion battery charging If the Li-ion battery is not sufficiently charged, you
status can start charging the Li-ion battery via the re-
mote charge function. For additional information,
The Li-ion battery charge status can be checked
refer to “Charging related remote function” in the
on the NISSAN Data Center website via an inter-
“Charging” section of this manual.
net enabled smart phone or personal computer.
EV-14 EV Overview
Operating the climate control system This allows the interior of the vehicle to be heated
before driving or cooled while the vehicle is charging. This re-
duces the load on the Li-ion battery while the
The vehicle heating and air conditioning system
vehicle is being driven and can help increase the
can be turned on via remote control with an
vehicle driving range. For additional information,
internet enabled smart phone or personal com-
refer to “Remote climate control” in the “Display
puter.
screen, heater, air conditioner, audio and phone
systems” section of this manual.
EV Overview EV-15
Notification of the Li-ion battery When the power switch is in the OFF position
warmer operation (if so equipped) and the charge connector is not connected, if the
Li-ion battery warmer starts or stops, it notifies
You can be notified with the status of the Li-ion
you to connect the charger to the vehicle.
battery warmer operation on the NISSAN Data
Center website via an internet enabled smart For additional information, refer to the LEAF Navi-
phone or personal computer. gation System Owner’s Manual.
EV-16 EV Overview
5. Check the Li-ion battery level and the esti-
mated driving range shown on the meter. For
additional information, refer to “Driving range”
in the “Instruments and controls” section of
this manual.
NOTE:
• Before driving, compare the driving dis-
tance to the destination displayed on the
navigation screen with the estimated driv-
ing range shown on the meter. Determine
if it will be necessary to charge the Li-ion
battery before or while driving to your
planned destination (models with naviga-
tion system).
STARTING YOUR VEHICLE
• If it is necessary to charge the Li-ion bat-
1. Depress the brake pedal.
tery, use the navigation system to search
2. Press the power switch. for available charging stations on your
3. Check that the READY to drive indicator light planned driving route (models with navi-
illuminates and the start up sound is audible. gation system).
For additional information, refer to “Ready to
drive indicator light” in the “Instruments and
controls” section of this manual.
4. For models with navigation system: If route
guidance is necessary, enter the destination
in the navigation system. For additional infor-
mation, refer to the LEAF Navigation System
Owner’s Manual.
EV Overview EV-17
DRIVING THE VEHICLE 5. Release the brake pedal. These are the following gear positions for driving
6. Depress the accelerator pedal and start the vehicle forward:
1. Depress the brake pedal.
driving. • Use the D (Drive) position for optimum driving
2. Release the parking brake.
performance.
3. Move the shift lever into the D (Drive) position.
• Use the B position for downhill driving. When
When released, the shift lever returns to its
the B position is used, more regenerative brake
original center position.
is applied when the accelerator pedal is re-
4. Confirm that the vehicle is in the D (Drive) leased in comparison to the D (Drive) position.
position. The indicator next to the “D” by the
shift lever illuminates and “D” is displayed on For additional information, refer to “Driving the
the meter. vehicle” in the “Starting and driving” section of
this manual.
EV-18 EV Overview
NOTE:
The regenerative brake converts the vehi-
cle’s forward motion to electric power to
help slow the vehicle.
Use the ECO mode for maximum vehicle range
and for city driving. The ECO mode helps reduce
power consumption by reducing acceleration
when compared to the same accelerator pedal
position in the D (Drive) position.
EV Overview EV-19
If the low battery charge warning light
illuminates, the Li-ion battery charge is too low for
travel. For additional information, refer to ⬙Low
battery charge warning light” in the “Instruments
and controls” section of this manual. Charge the
Li-ion battery as soon as possible.
EV-20 EV Overview
Parking the vehicle 2. Apply the parking brake.
1. When stopping the vehicle, push the P (Park) 3. Push the power switch to the OFF position.
position switch on the shift lever while de- 4. If a parking lot is equipped with charging
pressing the brake pedal. Confirm that the facilities, charge the Li-ion battery as neces-
vehicle is in the P (Park) position by checking sary. For additional information, refer to the
the shift indicator located near the shift lever “Charging” section of this manual.
on the vehicle information display.
EV Overview EV-21
NOTE:
• Charging can be started remotely, even if
the charging timer is set up.
• When you have forgotten to connect the
charge connector at home, there is a func-
tion that can notify you via a text message
capable cellular phone, internet enabled
smart phone or personal computer. For
additional information, refer to “Charging
related remote function” in the “Charg-
ing” section (models with navigation sys-
tem) of this manual.
• NISSAN recommends that you connect
CHARGING AFTER DRIVING functions are displayed on the vehicle infor- the normal charge cable when getting out
mation display. For additional information, re- of the vehicle, even if it is not going to be
Charging the Li-ion battery fer to “Vehicle information display” in the “In- used. By doing this, you can get the most
When you return home, connect the vehicle to struments and controls” section of this out of the remote climate control (models
the charging station installed at your home using manual. with navigation system) and Climate Ctrl.
the normal charge connector. 2. Open the charge port lid and charge port cap. Timer functions the next time you use the
Charge the vehicle or set the charging timer For additional information, refer to “Charge vehicle.
function to have the vehicle charge at a specific port lid” in the “Pre-driving checks and adjust-
time. For additional information, refer to “Charg- ments” section of this manual.
ing timer” in the “Charging” section of this 3. Connect the charge connector to the vehicle.
manual. 4. When a charging timer is turned on, charging
1. When the power switch is turned off, the starts at the set time. When a charging timer
settings of the charging timer, and the Climate is not turned on, charging starts immediately.
Ctrl. Timer and the charge connector lock
EV-22 EV Overview
EFFICIENT USE OF YOUR VEHICLE
RANGE NISSAN recommends the following driving • Avoid frequent stopping and braking. Maintain a
habits to help maximize vehicle range: safe distance behind other vehicles.
The distance you can drive the vehicle (range)
varies considerably depending upon available Before driving: • Turn off the air conditioner/heater when it is not
charge, weather, temperature, usage, battery • Follow recommended periodic maintenance. necessary.
age, topography, and driving style. • Keep tires inflated to correct pressure. • Select a moderate temperature setting for heat-
ing or cooling to help reduce power
Refer to the Monroney label (window sticker) for • Keep wheels in correct alignment.
consumption.
the official EPA range. Your actual range can vary, • Pre-heat or pre-cool the interior cabin while the
either initially or as the battery ages and with use • Use the air conditioner/heater and close win-
vehicle is charging.
over time. For additional information, refer to “Im- dows to reduce drag when cruising at highway
• Remove unnecessary cargo from the vehicle. speed.
prove driving range” in this section for information
of the factors that affect vehicle range an how to While driving: • Vehicle range may be substantially reduced in
use the vehicle to maximize vehicle range. • Drive in ECO mode extremely cold conditions (for example -4°F
– The ECO mode helps reduce power con- (-20°C).
IMPROVE DRIVING RANGE sumption by reducing acceleration when • Using the climate control system to heat the
Vehicle range depends on a number of factors. compared to the same accelerator pedal cabin when outside temperature is below 32°F
Actual vehicle range will vary depending upon: position in the D (Drive) position. (0°C) uses more electricity and affects vehicle
• Drive at a constant speed. Maintain cruising range more than when using the heater when
• Speed,
speeds with constant accelerator positions or the temperature is above 32°F (0°C).
• Vehicle load,
by using cruise control when appropriate.
• Electrical load from vehicle accessories,
• Accelerate slowly and smoothly. Gently press
• Traffic and road conditions. and release the accelerator pedal for accelera-
tion and deceleration.
• Drive at moderate speeds on the highway.
EV Overview EV-23
• Release the accelerator pedal to slow down To maximize vehicle range, NISSAN recom- • Avoid sustained high battery state of charge
and do not apply the brakes when traffic and mends using the default setting, long distance (caused, for example, by frequently charging to
road conditions allow. mode (100% charge). To maximize the battery’s 100% state of charge and/or leaving the battery
– This vehicle is equipped with a regenerative useful life, use the following driving and charging above 80% state of charge for long periods of
brake system. The primary purpose of the habits where possible: time).
regenerative brake system is to provide • Avoid exposing a vehicle to extreme ambient • Allow the battery charge to be below at least
some power to recharge the Li-ion battery temperatures for extended periods. 80% before charging.
and extend driving range. A secondary ben- • Avoid storing a vehicle in temperatures below • Moderate driving.
efit is “engine braking” that operates based −13°F (−25°C) for more than 7 days. • Use of ECO mode.
on Li-ion battery conditions. In the D (Drive)
• Avoid leaving your vehicle for more than 14 days • If the vehicle will not be used for an extended
position, when the accelerator is released,
where the Li-ion battery available charge gauge period of time, charge the Li-ion battery using
the regenerative brake system provides
reaches a zero or near zero (state of charge). the long life mode once every three months. Do
some deceleration and some power to the
Li-ion battery. • Allow the vehicle and Li-ion battery to cool not operate the charging timer repeatedly while
down after use before charging. the charge connector is connected to the ve-
LI-ION BATTERY LIFE • Park/store your vehicle in cool locations out of hicle after the Li-ion battery charging is com-
The Li-ion battery’s ability to hold a charge, like all direct sunlight and away from heat sources. pleted. Doing so may discharge the 12-volt
batteries, decreases with battery age and usage • Avoid sustained high battery temperatures battery.
which results in decreased vehicle range when (caused, for example, by exposure to very high The power of the Li-ion battery can be
compared to the vehicle range when the vehicle ambient temperatures or extending highway checked on the Li-ion battery available charge
was new. This is normal and expected, and does driving with multiple quick charges (if so gauge. For additional information, refer to “Li-
not indicate a malfunction of the vehicle or Li-ion equipped)) . ion battery available charge gauge” in the “In-
battery. • Use the normal charging or trickle charging struments and controls” section of this
methods to charge the Li-ion battery and mini- manual.
The Li-ion battery’s ability to hold a charge can be
affected by how you drive the vehicle, store the mize the use of public Fast Charge or Quick
vehicle, how you charge the Li-ion battery and Charger.
Li-ion battery temperature during vehicle opera-
tion and charging.
EV-24 EV Overview
EV UNIQUE INFORMATION
LI-ION BATTERY MAINTENANCE METERS AND INDICATORS
In addition to the regular maintenance recom- The vehicle has two displays to provide informa-
mended by NISSAN, the LEAF requires some tion regarding vehicle operation:
special Li-ion battery inspections. • Upper display
• Refer to the NISSAN Warranty Information • Lower display
Booklet for significant limitations, exclusions
and possible voiding of your warranty resulting
from failure to have these necessary inspec-
tions, repairs and/or adjustments performed.
• Refer to the NISSAN Service and Maintenance
Guide for a detailed explanation of the Li-ion
battery inspection and intervals.
Upper display
Master warning lights:
The master warning lights are located in the
upper display.
The master warning lights illuminate when any
warning lights or indicators illuminate in the lower
display or when messages are displayed on the
vehicle information display.
For additional information, refer to “Master warn-
ing light (red/yellow)” in the “Instruments and
controls” section of this manual.
EV Overview EV-25
ECO indicator: Lower display Power meter:
This indicator provides instant information about Li-ion battery temperature gauge: This meter displays the actual traction motor
how efficiently the vehicle is being operated. You power consumption and the regenerative brake
This gauge displays the temperature of the Li-ion
can see how changing your driving style or op- power provided to the Li-ion battery.
battery.
eration of vehicle accessories affects power con- For additional information, refer to “Power meter”
sumption. For additional information, refer to “Li-ion battery
in the “Instruments and controls” section of this
temperature gauge” in the “Instruments and con-
For additional information, refer to “ECO indica- manual.
trols” section of this manual.
tor” in the “Instruments and controls” section of
this manual.
EV-26 EV Overview
Driving range: Li-ion battery available charge gauge: Li-ion battery capacity level gauge:
This indicator displays the estimated driving This gauge displays the available Li-ion battery This gauge displays the available capacity of the
range (calculated based on a program that ac- power remaining to drive the vehicle. Li-ion battery remaining to store power.
counts for current driving style and operational For additional information, refer to “Li-ion battery For additional information, refer to “Li-ion battery
conditions) that can be driven before recharging available charge gauge” in the “Instruments and capacity level gauge” in the “Instruments and
is necessary. controls” section of this manual. controls” section of this manual.
For additional information, refer to “Driving range”
in the “Instruments and controls” section of this
manual.
EV Overview EV-27
3. 12-volt battery charge warning light
4. Plug-in indicator light
5. READY to drive indicator light
6. Power limitation indicator light
7. EV system warning light
8. Electric shift control system warning light
9. Brake system warning light (yellow)
10. Low battery charge warning light
11. Headlight warning light (if so equipped)
12. Approaching Vehicle Sound for Pedestrians
(VSP) system warning light
For additional information, refer to “Warning
lights, indicator lights and audible reminders” in APPROACHING VEHICLE SOUND
the “Instruments and controls” section of this FOR PEDESTRIANS (VSP) SYSTEM
manual.
The Approaching Vehicle Sound for Pedestrians
(VSP) system is a function that uses sound to
alert pedestrians of the presence of the vehicle
when it is being driven at a low speed.
Warning and indicator lights When the vehicle starts to move, it produces a
sound.
The EV (Electric Vehicle) system uses the follow-
The sound stops when the vehicle speed is more
ing EV (Electric Vehicle) specific warning and
than 19 mph (30 km/h) while accelerating.
indicator lights.
The sound starts when the vehicle speed is less
1. Master warning light (red)
than 16 mph (25 km/h) while decelerating.
2. Master warning light (yellow)
EV-28 EV Overview
The sound stops when the vehicle stops. For additional information, refer to “Driving the
The sound does not stop with the vehicle in the R vehicle” in the “Starting and driving” section of
(Reverse) position even if the vehicle stops. this manual.
EV Overview EV-29
NOTE:
The solar cell may not provide full charging
power in the following situations.
• When the intensity of sunlight is weak.
• When the solar cell module is in the
shade.
• When the solar cell module is covered by
leaves or dirt.
EV-30 EV Overview
Charging
CH-2 Charging
– Do not store and use charging • Trickle charging is performed using the NOTE:
equipment in locations where the EVSE (Electric Vehicle Supply Equip- • When charging the Li-ion battery, place
temperature is over 185°F (85°C). ment) provided with the vehicle. the power switch in the OFF position.
– Do not place the charging equip- NISSAN recommends using an AC 110 When the power switch is in the ON posi-
ment close to a heater or other heat - 120 volt, 15A, dedicated electrical cir- tion, the Li-ion battery will not start charg-
source. cuit and outlet. The dedicated circuit is ing.
• Make sure the cap is closed on the used to help prevent circuit damage or
charge port when charging is finished. the circuit breaker from tripping due to • If the charger is connected to the vehicle
If the charge port lid is closed when the the high draw of charging the Li-ion when it is in the READY to drive position,
cap is open, water or foreign materials battery. If the dedicated circuit is not the power switch automatically changes
may enter the charge port. used, the circuit may cause adverse to the ON position. Place the power switch
• Do not charge when a vehicle body interference on MCB (Moulded Circuit in the OFF position to begin charging.
cover is in use. This may cause damage Board) and household electrical appli- • For your safety, if the charger is connected
to the charge connector. ances such as televisions and audio
• Do not attempt to perform a jump start to the vehicle while the power switch is in
systems. If the circuit is shared, and
on the 12-volt battery at the same time another electrical device is being used the READY to drive position, the vehicle
that the Li-ion battery is being at the same time the vehicle is charg- will automatically switch to the ON posi-
charged. Doing so may damage the ing, the breaker may trip. A licensed tion. Because charging will not be started
vehicle or charging equipment and professional electrician should install while the power switch is in this position,
could cause an injury. For additional a dedicated circuit if one is not already be sure to place the power switch in the
information, refer to “Jump starting” in available. OFF position.
the “In case of emergency” section of
• When the ambient temperature is 32°F
this manual.
(0°C) or less, charging time may be longer
than normal and the level to which the
Li-ion battery can be charged may be less
than at higher temperatures.
Charging CH-3
• If the vehicle will not be used for an ex- • It is recommended to keep the charge
tended period of time, charge the Li-ion cable connected to save Li-ion battery
battery using the long life mode once ev- power, when the heater and air condi-
ery three months. Do not operate the tioner are operating with remote opera-
charging timer repeatedly while the tion (models with navigation system).
charge connector is connected to the ve- • If the charge port is frozen, melt the ice
hicle after the Li-ion battery charging is using a hair dryer. After the ice has
completed. Doing so may discharge the melted, charge the Li-ion battery. Forcing
12-volt battery. For additional informa- the charge connector to connect may
tion, refer to the long life mode charging cause a malfunction.
method, in the “Charging timer” section of • If foreign materials have entered the
this manual. If the Li-ion battery becomes charge connector and charge port and it is
discharged, charge it immediately. not possible to connect it, do not attempt
• The power switch can be set to the ON to force the connection. Contact a NISSAN
position and the climate control and navi- certified LEAF dealer. Forcing the charge
gation system (models with navigation connector to connect may cause damage
system) can be used while the Li-ion bat- to the charging equipment and vehicle.
tery is charging. However, because these • There is a hole on the charge port for
operations consume Li-ion battery power, water drainage. If the water drainage hole
it will take longer for the Li-ion battery to becomes blocked, or if water gets trapped
become fully charged. Place the power inside the charge port, do not charge.
switch in the OFF position to help reduce Contact a NISSAN certified LEAF dealer.
Li-ion battery charge time.
• If electrical power is interrupted while
charging, charging restarts automatically
when the electrical power is restored.
CH-4 Charging
TYPES OF CHARGE AND HOW TO
CHARGE THE LI-ION BATTERY
Charging CH-5
CH-6 Charging
This vehicle is an electric vehicle and it requires Normal charge Trickle Charge
electricity to operate. The Li-ion battery is the only NISSAN recommends using normal charging for Trickle charging is not recommended for regular
source of power to operate the vehicle. It is usual charging of the vehicle. Use of quick charge use. Trickle charge can be used when it is nec-
important to conserve power and plan your should be minimized in order to help prolong essary to perform an emergency charge at a
charging needs when you drive to avoid com- Li-ion battery life. destination such as a friend’s house.
pletely discharging the Li-ion battery and being
unable to drive. Normal charging uses an SAE J1772 compliant Trickle charge uses the EVSE (Electric Vehicle
charging device that can be installed on a dedi- Supply Equipment) or an SAE J1772 compliant
There are three methods available to charge the cated 220V/240V circuit in your home. NISSAN cord set to connect the vehicle to an AC 110–
Li-ion battery; recommends the installation of a home charging 120 volt, 15A dedicated outlet. The outlet should
• Normal charge dock by a licensed professional electrician. be protected by a circuit breaker or fuse to avoid
• Trickle charge NISSAN has contracted with a company to assist overloading the circuit or other electrical hazard.
• Quick charge (if so equipped) you in purchasing and installing a charger. Con- It takes approximately 26 hours to charge the 30
tact your NISSAN certified LEAF dealer. kWh Li-ion battery from discharged (low battery
The time to completely charge the vehicle Li-ion
battery varies, based on the state of charge of the It takes approximately 5.5 to 9.5 hours for the 30 charge warning light illuminated) to 100%
Li-ion battery, condition and age of the Li-ion kWh battery (depending on the charger) in order charged.
battery, ambient temperature and condition of the to charge the Li-ion battery from discharged (low For additional information, refer to “How to trickle
power source connected to the vehicle. The battery charge warning light illuminated) to 100% charge” in this section.
charging times provided in this manual are esti- charged.
Quick charge (if so equipped)
mates only and may vary. For additional information, refer to “How to nor-
mal charge” in this section. Quick charge capability is only available on ve-
hicles manufactured with the quick charge op-
tion, which includes the quick charge port. If your
vehicle does not have such a port, quick charging
cannot be used.
Charging CH-7
A vehicle equipped with a quick charge port is charging infrastructure to be developed in your
compatible with most CHAdeMO (Japanese in- area. Depending on where you live or drive, there
dustry standard) connectors on charging sta- may not be sufficient public charging stations
tions. Charging stations using this standard are available to meet your particular needs for driving
UL certified and safe to use in the US. While range and charging away from your home. Trip
supported by NISSAN, this connector may not planning is therefore important, and you should
become the US SAE standard. plan trips with these facts in mind.
Quick charging is possible (even several times a Quick charge uses public charging stations (up
day) if the battery temperature is not near the red to 50 kW of power).
zone. If the battery temperature reaches the red The time needed to charge the Li-ion battery from
zone, in order to protect the battery, quick charg- discharged (low battery charge warning light illu-
ing is not allowed and the power limitation mode minated) to 80% charged using the a quick char-
will be triggered. ger depends on many factors including the Li-ion
The Li-ion battery temperature gauge can be
Public charging: battery temperature and the type of quick charger
used to estimate the approximate time needed to
This vehicle is compatible with any public charg- used.
charge the Li-ion battery to 80%.
ing station that is SAE J1772 compliant. If you It may take more time to charge the Li-ion battery Li-ion battery tem- Estimated charge
attempt to charge from a non-compliant charging using the quick charger if the vehicle is parked in perature gauge time
station, you may not receive a complete charge, a cold location (for example below 32°F (0°C))
3 or fewer seg- More than approxi-
or you may not be able to charge at all due to for a long time. 䊊
A
ments illuminated mately 90 minutes
hardware and software differences. NISSAN is
4-5 segments illu- Approximately 30-90
working with state, municipalities, utility compa- 䊊
B
minated minutes
nies and others to assist in the preparation of
6-7 segments illu- Approximately 30
markets and infrastructure. However, NISSAN 䊊
C
minated minutes
makes no representations that public charging
8-9 segments illu- Approximately 30-60
stations will be available in locations where you 䊊
D
minated minutes
wish to operate the vehicle, nor can NISSAN
predict the period of time it may take for public
CH-8 Charging
Li-ion battery tem- Estimated charge • Check by using the Li-ion battery available HOW TO NORMAL CHARGE
perature gauge time charge gauge on the meter when the power
switch is placed in the ON position. For addi-
10 or more seg- More than approxi-
䊊
E
ments illuminated mately 60 minutes
tional information, refer to “Li-ion battery avail- WARNING
able charge gauge” and “Li-ion battery low • If you use any medical electric devices,
NOTE: charge warning” in the “Instruments and con- such as an implantable cardiac pace-
Charging time is typically limited to 60 min- trols” section of this manual. maker or an implantable cardiovascu-
utes when using a quick charger. Press the • Check by using the charging status indicator lar defibrillator, check with the electric
light. For additional information, refer to “Charg- medical device manufacturer concern-
start switch on the quick charger after it
ing the effects that charging may have
stops if additional charge time is necessary ing status indicator lights” in this section.
on implanted devices before starting
to reach an 80% charge. the charge operation. Charging may
NOTE:
For additional information, refer to “How to quick affect the operation.
• During the charge operation, charge con- • Be sure to follow the precautions for
charge” in this section. tinues when the power switch is placed in using the charger that can be installed
Power Limitation Mode the ON position. in your home. Failing to do so could
This mode protects the health and operation of • The Li-ion battery cannot be charged if the result in serious injury or death.
the vehicle’s Li-ion battery. This mode operates in quick charge connector and the normal
certain extreme conditions (heat, cold, low state charge connector are connected at the
same time. If another charge connector is CAUTION
of charge). Power available to vehicle systems,
including its traction motor, is limited resulting in connected mid-charge, charging will stop. • Do not use any charging equipment
limited performance, acceleration and top speed. • For safety reasons, it is not possible to that is not compatible with the LEAF.
Doing so could prevent the Li-ion bat-
Charging may be automatically terminated, espe- switch to the READY to drive position
tery from charging properly or could
cially with repeated quick charging in extreme hot while a charge connector is connected. result in damage to the vehicle or Li-
weather. • During charging, it is possible that the ion battery.
Checking Li-ion battery charge radio may be inaudible due to noise by the • Normal charge uses the charging device (AC
electromagnetic wave. 220 - 240 volt, 16A or 32A) that can be in-
The three methods for checking the amount of
charge are as follows. stalled in your home to charge the Li-ion battery.
Charging CH-9
• Immediate charge, charging timer and remote
charge (models with navigation system) can be
performed in the normal charge mode. For ad-
ditional information, refer to “Charging meth-
ods” in this section.
• The Genuine NISSAN charging equipment
communicates with the vehicle before Li-ion
battery charging starts. If this communication
does not occur because other equipment is
used, the Li-ion battery will not charge.
• NISSAN recommends that you connect the
normal charge cable when getting out of the
vehicle, even if it is not going to be used. By
doing this, you can get the most out of the To start normal charge: 4. Connect the charge connector to the charge
remote climate control (models with navigation 1. Push the P (Park) position switch to place the port. If it is connected normally, a beep will
system) and Climate Ctrl. Timer functions the vehicle in the P (Park) position and apply the sound once.
next time you use the vehicle. parking brake. 5. If charging has started or if the battery is
2. When charging the Li-ion battery, place the waiting for the charging timer, a beep will
power switch in the OFF position. When the sound twice and the charging status indicator
power switch is in the ON position, the Li-ion light display will change. For additional infor-
battery will not start charging. mation, refer to “Charging status indicator
lights” in this section.
3. Open the charge port lid and charge port cap.
For additional information, refer to “Charge
port lid” and “Charge port cap” in the “Pre-
driving checks and adjustments” section of
this manual.
CH-10 Charging
HOW TO TRICKLE CHARGE – Improper use of the charger may
result in a fire and serious injury or
death.
WARNING – Do not use this charger in structures
• If you use any medical electric devices, more than 40 years old.
such as an implantable cardiac pace- – Do not use this charger in structures
maker or an implantable cardiovascu- using fuse-based circuit protection.
lar defibrillator, check with the electric Use only with electrical circuits pro-
medical device manufacturer concern- tected by circuit breakers.
ing the effects that charging may have – Do not use this charger on electrical
on implanted devices before starting circuits with two-prong outlets.
the charge operation. Charging may – Do not use charger if outlet appears
affect the operation. damaged or will not hold plug firmly.
• In order to avoid an electric shock or – Discontinue charger use immedi-
To stop normal charge: fire due to a short circuit, connect to a ately if plug or outlet becomes hot
1. Ensure that the charge connector lock is not GFI (Ground Fault Interrupter) circuit to the touch or if you notice any
breaker and use a waterproof electri- unusual odors.
engaged. For additional information, refer to
cal ground socket. – Do not use charger if other devices
“Charge connector lock switch” in this • The NISSAN Genuine EVSE (Electric are plugged into the same circuit.
section. Vehicle Supply Equipment) charging – Never use extension cords or plug
2. Press the button on the charge connector, device provided with your vehicle adapters with charger.
release the lock and remove the charge con- draws 12 amps continuously while – Do not operate with a damaged
nector from the charge port and properly charging the Li-ion battery. Do not plug cord.
store it. in to any electrical circuit unless it is – Always unplug the charger when not
inspected by a licensed electrician to in use.
3. After closing the charge port cap on the confirm that the electrical circuit can – When unplugging, be sure to pull by
charge port, close the charge port lid. accept a 12 amp draw. Any electrical the plug and not the cord.
circuit has a much higher likelihood of
NOTE:
being compromised in the following
To stop charging mid-charge, remove the charge conditions listed below.
connector. Charging automatically stops.
Charging CH-11
• Trickle charging is performed using an AC 110 -
– The device has parts that may spark • Pass the lower side belt of the EVSE
120 volt, 15A dedicated electrical outlet using
inside. Do not use it where gasoline, (Electric Vehicle Supply Equipment)
paint, or flammable liquids are used case securely through the fastener on the EVSE (Electric Vehicle Supply Equipment)
or stored. the bottom of the luggage board. If the provided with the vehicle.
– Do not use if a malfunction occurs or case suddenly becomes loose, it may • The Genuine NISSAN EVSE (Electric Vehicle
if the charger has been damaged in cause serious injury or death. Supply Equipment) charging equipment or
any manner. Return to a NISSAN trickle charge cable performs a communication
certified LEAF dealer for replace- function with the vehicle before Li-ion charging
ment. CAUTION starts. If this communication does not occur
– The charger contains no user ser-
• Only charge using a standard 110 - 120 because other equipment is used, the Li-ion
viceable parts. Do not attempt to
volt, 15A dedicated electrical outlet battery will not charge.
repair the charger, doing so will void
(For example do not use an electric
your warranty. • Immediate charge, charging timer and remote
generator). Failure to do so may cause
charging to fail and could cause dam- charge (models with navigation system) can be
age to the Li-ion battery charging performed in the trickle charge mode. For addi-
equipment due to power surges. tional information, refer to “Charging methods”
• NISSAN recommends using Genuine in this section.
NISSAN charging equipment to charge
the vehicle. Using non-NISSAN equip-
ment could cause the Li-ion battery to
not charge correctly and may damage
the Li-ion battery.
CH-12 Charging
To start trickle charging: 4. Take out the EV (Electric Vehicle) or trickle 7. Remove the safety cap from charge
*:You can pass a rope through the hole 䊊 A on the charge cable from the rear hatch. connector.
control box in order to hang it up while the Li-ion 5. Connect the electrical plug to the 110 - 120
battery is charging. volt, 15A dedicated electrical outlet. If it is
1. Push the P (Park) position switch to place the connected normally, the green light on the EV
vehicle in the P (Park) position and apply the (Electric Vehicle) control box indicator light
parking brake. illuminates.
2. When charging the Li-ion battery, place the 6. Open the charge port cap. For additional in-
power switch in the OFF position. When the formation, refer to “Charge port cap” in the
power switch is in the ON position, the Li-ion “Pre-driving checks and adjustments” section
battery will not start charging. of this manual.
3. Open the charge port lid. For additional infor-
mation, refer to “Charge port lid” in the “Pre-
driving checks and adjustments” section of
this manual.
Charging CH-13
8. Connect the charge connector to the charge 10. When recharging outside, such as in your To stop trickle charge:
port. If it is connected normally, a beep will driveway, use a commercially available pad- 1. Ensure that the charge connector lock is not
sound once. lock attached in position 䊊
A to prevent theft. engaged. For additional information, refer to
9. If charging has started, or if the Li-ion battery “Charge connector lock switch” in this
is waiting for the charging timer, a beep will section.
sound twice and the charging status indicator 2. Press the button on the charge connector,
light display will change. For additional infor- release the lock and remove the charge con-
mation, refer to “Charging status indicator nector from the charge port.
lights” in this section. 3. Attach the safety cap to the EVSE (Electric
Vehicle Supply Equipment).
4. Remove the electrical plug from the AC 110 -
120 volt, 15A dedicated electrical outlet.
CH-14 Charging
c. Place the charge cable and charge NOTE:
connector into the case in front of the To stop charging mid-charge, remove the
EVSE (Electric Vehicle Supply Equip- charge connector. Charging automatically
ment) control box. stops.
Charging CH-15
NOTE:
Quick charging is possible (even several
times a day) if the battery temperature is
not near the red zone. If the battery tem-
perature reaches the red zone, in order to
protect the battery, quick charging is not
allowed and the power limitation mode will
be triggered.
When the Li-ion battery available charge
and the Li-ion battery capacity are shown
on the quick charger unit, the readings may
differ from the Li-ion battery available
charge/capacity reading shown on the ve-
hicle’s display (with 30 kwh battery only). To start charging: 4. Align 䊊1 with the groove of the charge port
1. Push the P (Park) position switch to place the and insert the charge connector.
vehicle in the P (Park) position and apply the
parking brake.
2. When charging the Li-ion battery, place the
power switch in the OFF position. When the
power switch is in the ON position, the Li-ion
battery will not start charging.
3. Open the charge port lid and charge port cap.
For additional information, refer to “Charge
port lid” and “Charge port cap” in the “Pre-
driving checks and adjustments” section of
this manual.
CH-16 Charging
NOTE:
• Charging may automatically stop even if it
is not completed.
• If charging stops mid-charge, you can re-
start charging by pressing the start button
on the quick charger again.
• The charge connector is locked to the
charge port during charging and cannot
be disconnected. Follow the instructions
on the quick charge equipment to stop
charging. Confirm charging is stopped by
looking at the indicators on the dash. The
charge connector can be disconnected
5. Grasp the lock lever and lock the charge from the vehicle when charging is
connector. stopped.
CAUTION
6. Follow the instructions on the quick charge • When quick charging, the Li-ion battery
• Be sure to insert the charge connector equipment to start charging. When the equip-
straight into the quick charge port right charging rate is slower as the percentage
ment is properly installed and ready to charge of available battery charge increases.
up to the base. Failure to do so may
a beep sounds twice and the charging status
result in the Li-ion battery not charging
or could cause damage to the charging indicator light will change. For additional infor-
equipment. mation, refer to “Charge status indicator
lights” in this section
Charging ends in the following situations.
• When charging is complete
• When charging time has exceeded 60 minutes
• When the possible charge time set for the quick
charger is exceeded
Charging CH-17
CAUTION
• As the quick charge connector is
heavier in comparison to the other
charge connectors, allowing it to drop
could cause damage to the vehicle or
charge connector or personal injury.
When removing the connector, be sure
to pull it out straight and as carefully
as possible.
CH-20 Charging
CHARGING METHODS
CHARGING TIMER NOTE:
Use charging timer to schedule when the Li-ion • Always place the power switch in the OFF
battery charges. The vehicle automatically begins position after setting the charging timers.
charging at the scheduled times when the charge When the power switch in the ON position,
connector is connected to the vehicle. The timers the Li-ion battery will not start charging.
do not need to be reset each time the Li-ion • The Li-ion battery may not be charged to
battery needs charging. the expected level if the charging timer
start time and end time are set so there is
Charging timer not enough time to charge the Li-ion bat-
Use the charging timer to schedule when the tery.
Li-ion battery will be charged. The vehicle auto- • When either the charge start time or
matically starts charging at the scheduled time charge end time is set, the charging timer
when the charge connector is connected to the function is activated.
vehicle. The timers do not need to be reset each 1. Push and touch “Charging Timer”.
• When only the charging timer end time is
time the Li-ion battery needs to be charged. Two Touch “Estimated Time” to view approximate
set, the system automatically determines
timer settings can be saved. time required to reach 100% charge.
when to begin charging. The Li-ion battery
With navigation system 2. Touch “Edit Schedule”. Timer charge setting may not be charged to the expected level
screen is displayed. in the following conditions:
The charging timer can save two timer settings
3. Set preferred time and day of the week for – The Li-ion battery is charged in could
that include the charging start time and end time.
vehicle charging. weather.
The charging timer can be applied to one of the
timer settings for each day of the week. 4. After entering the information, touch “Save”. A – The Charge connector is connected to
confirmation screen is displayed. the vehicle too close to the scheduled
The vehicle automatically begins charging at the charging end time.
5. Touch “OK” to confirm the setting, push the
scheduled times when the charge connector is
power switch to the OFF position, and then
connected to the vehicle. The timers do not need
connect the charge connector to the vehicle.
to be reset each time the Li-ion battery needs to
be charged.
Charging CH-21
• When only the charging timer end time is same time, it is possible that the charger • Charging timer is performed according to
set, the system automatically stops charg- will snot start or the battery will not be the current time setting on the bottom left
ing when the Li-ion battery charges to a charged to the level expected. of the display. When setting the charging
full charge. Charging may stop before the • If the Li-ion battery warmer (if so timer function, be sure to check that the
scheduled end time. equipped) is operating while the Climate current time displayed is correct.
• If charging timer and the Climate Ctrl. Ctrl. Timer or Remote Climate Control is • To turn off the charging timer function,
Timer are operating at the same time due being used, performance of the Climate touch ON on the timer charge setting
to an overlap of the timer settings, you can Control will be reduced. screen until the indicator lights are turned
prioritize which function receives electri- • The Li-ion battery may not charge to the off. Touch SAVE to apply the change. If the
cal power first. For additional information, expected level using the Charging Timer settings shown on the screen are correct,
refer to “Leaf Navigation System Owner’s when a Start time and End time are set touch OK. After this operation has been
Manual”. while the Li-ion battery warmer (if so performed, the indicator disappears and
• When charging is set as the first priority, equipped) operates. the charging timer function is turned off.
the Climate Ctrl. Timer does not start until • Set only the Charging Timer End time The start and stop time settings are not
10 segments (80%) of the Li-ion battery when charging in cold weather. The ve- deleted, even if the charging timer func-
available charge gauge are illuminated. hicle automatically determines when to tion is turned off.
• Even when the climate control is set as the start charging to fully charge the Li-ion • If the day of the week is not selected on
first priority, the climate control system battery, even if the Li-ion battery warmer the timer charge setting screen, the charg-
will be turned off when the electric de- (if so equipped) operates. Charging ends ing timer will not operate on that day. The
mands of the climate control system is before the set End time if the Li-ion bat- system will wait until the net set charging
more than can be provided to the Li-ion tery is fully charged. time to perform charging.
battery for charging. • The 12–volt battery can become dis-
• Some charging stations used to perform charged if the charging timer is operated
normal charge are equipped with timer repeatedly between the Li-ion battery
functions. If the charger timer function charges when the vehicle is not used for
and the vehicle timer are both set, and the an extended period of time.
two timers are not set to operate at the
CH-22 Charging
• +: Touch or touch and hold to increase the
time.
• x: Touch to delete the numbers entered in the
corresponding column.
4. Touch the keys to set the days of the week you
wish to start charging.
5. Touch to save the settings.
Charging CH-23
• When the Charging Timer and the Climate
Ctrl. Timer are set at the same time, the
charging start time moves to an earlier
time.
• Depending on the Li-ion battery condition
and the power source status, charging
may end earlier than the charging end
time. This is not a malfunction.
1. Push the switch 䊊A on the left side of
the combination meter panel.
CH-24 Charging
IMMEDIATE CHARGE
When a charging timer is not turned on, charging
automatically starts when a normal or trickle
charge connector is connected to the vehicle.
Use the immediate charge mode anytime you
want to start charging when a charging timer is
turned on by performing the following:
1. Place the power switch in the OFF position.
To turn the timer on or off, use the switch 4. The hour portion of the time is highlighted on
to highlight “On” or “Off” and then push the the screen. Push the switch to change
switch. If “On” is selected, an additional the hour field in increments of one hour. Push
screen is displayed that allows you to change the switch to move to the minutes field.
the time of the charging timer. 5. Push the switch to change the minute
field in increments of ten minutes. Push the
switch to finish setting the charging
timer.
Charging CH-25
NOTE: CHARGING RELATED REMOTE
• You have 15 minutes to connect a normal FUNCTION (MODELS WITH
or trickle charge connector to the vehicle NAVIGATION SYSTEM)
after the immediate charge switch is
This vehicle incorporates a communication de-
pressed. If a charge connector is not con-
vice that is called a TCU (Telematics Communi-
nected to the vehicle within 15 minutes,
cation Unit). The communication connection be-
the vehicle automatically returns to the
tween this unit and NISSAN Data Center allows
previous setting.
for various remote function services.
• Immediate charge will be available for 15
• Li-ion battery status check:
minutes before returning automatically to
the previous setting. The charging status of the Li-ion battery can
be checked using your personal computer or
• To cancel immediate charge mode press
internet enabled smart phone even if you are
the immediate charge switch again.
not in the vehicle.
2. Press the immediate charge switch. • If the charge cable is disconnected, the
• Remote charge:
Li-ion battery automatically switches to
3. Connect the normal or trickle charge cable The function of starting the Li-ion battery
charging timer. To perform an immediate
when the charging status indicator light charge or starting the heater and air condi-
charge again, press the immediate charge
changes to display immediate charge mode. tioner is available using your personal com-
switch and connect the charge cable.
For additional information, refer to “Charging puter or internet enabled smart phone.
status indicator lights” in this section. • If the charge cable is already connected,
press the immediate charge switch to • Unplugged status:
start performing an immediate charge. A notification e-mail will be sent to your per-
sonal computer or internet enabled smart
phone if the plug is not connected at the
specific time you selected, after turning off the
power switch.
CH-26 Charging
CHARGING RELATED INDICATOR
LIGHTS
NOTE: • Certain remote functions required a com-
• Establishing the NissanConnectSM EV patible smart phone, which is not included
service is necessary before using this ser- with vehicle.
vice. For additional information, refer to • NissanConnectSM EV information system
the LEAF Navigation System Owner’s features are included through a subscrip-
Manual. tion service which requires owner consent
• To check the Li-ion battery charging status to activate. The subscription must be ac-
using an internet enabled smart phone or tive to use these features.
personal computer, the following condi- • NissanConnectSM EV communications
tions must be met: may be received at a verified e-mail ad-
– The vehicle must be located in a cellu- dress or by SMS/text messaging-enabled
lar phone coverage area. mobile phone.
– The cellular phone must be located in • Standard text rates and/or data usage
an area with cellular phone coverage. may apply depending on your carrier.
– If using a computer, the computer must CHARGING STATUS INDICATOR
be connected to the internet.
LIGHTS
– Some cellular phones are not compat-
ible and cannot be used to check the
Li-ion battery charging status. Please The charging status indicator lights 䊊 1 to 䊊 3
confirm beforehand. display the charging status, and are visible from
both inside and outside the vehicle.
Charging CH-27
When the normal charge connector lock is
unlocked Ready for charging timer Ready for immediate charge
All of the indicator lights, 䊊
1 to 䊊
3 , will flash and If the charging timer is set, the indicator lights When the power switch is off and if the immedi-
a beep will sound three times when the normal illuminate in order from 䊊 1 to 䊊 3 . The indicator ate charge switch is pressed while the charge
charge connector lock switch on the Intelligent lights turn off after approximately 5 minutes. cable is not connected, the indicator light 䊊2
Key or the charge port lid opener switch is illuminates.
pushed. This indicator light 䊊2 illuminates when the ve-
When the normal charge connector is con- hicle is ready for immediate charge. You have 15
nected incorrectly minutes to connect the charge connector to the
vehicle. If the charge connector is not connected
All of the indicator lights, 䊊
1 to 䊊
3 , will flash and
within 15 minutes, the indicator light 䊊2 turns off
a beep will sound three times within 30 seconds
and you must start the immediate charge mode
when the charge connector is connected incor-
again to charge the Li-ion battery.
rectly to the normal charge port.
CH-28 Charging
When charging
When fully charged When the indicator light 䊊
3 flashes
When the Li-ion battery is being charged, the
charging status indicator lights will change de- All of the indicator lights 䊊 to 䊊 illuminate when
1 3 The indicator light 䊊 3 flashes when the 12-volt
pending on the amount the Li-ion battery is the Li-ion battery is fully charged to the selected battery is being charged. For additional informa-
charged. charging mode level. tion, refer to “Charging the 12-volt battery” in the
The indicator lights turn off after approximately 5 “EV overview” section of this manual.
*: This value is also displayed by the illumination
of segments of the Li-ion battery available charge minutes or when the charge connector is re-
gauge on the instrument panel. moved.
Charging CH-29
The indicator will also flash for up to 5 minutes if
the electrical power to the EVSE is interrupted
during charging. Charging will restart automati-
cally when the electrical power to the EVSE is
restored if the charging connector is connected.
The charge start beep will not sound when
charging restarts.
The indicator will also flash when the following
systems are operating:
• Climate Ctrl. Timer
• Remote climate control (if so equipped)
• Li-ion battery heater (if so equipped)
EVSE (ELECTRIC VEHICLE SUPPLY
When not charging
EQUIPMENT) CONTROL BOX
None of the lights are illuminated when the Li-ion INDICATOR LIGHT
battery and 12-volt battery are not charging.
When a trickle charge is being performed, the
charging status is shown by the indicator light
that is on the EVSE (Electric Vehicle Supply
Equipment) control box.
An indicator light also indicates if there is an
EVSE malfunction.
CH-30 Charging
READY CHARGE FAULT Status and action to be taken
䡩 䡩 䡩 Every time the EVSE plug is connected to an outlet, all indicator lights illuminate for 0.5 seconds.
After initial processing is completed, when the EVSE is not connected to the vehicle, or the EVSE is con-
䡩 쏹 쏹
nected to the vehicle but charging is not being performed.
䡩 䡩 쏹 While the battery is being charged
When the ground cable is disconnected
嘷
䡩 쏹 쏹 Check the grounding of the outlet being used. If the grounding is normal, contact a NISSAN certified LEAF
dealer.
䡩 When the temperature of the electrical plug is too hot, or the EVSE is unable to detect the temperature of the
쏹 electrical plug, check that the electrical plug is connected correctly. If it is connected normally, stop use im-
嘷
䡩 or 嘷
䡩 mediately and contact a NISSAN certified LEAF dealer.
嘷
䡩
When an electric leakage occurs or the EVSE malfunctions
䡩 쏹 嘷
䡩 Stop use immediately and contact a NISSAN certified LEAF dealer.
When the EVSE malfunctions
䡩 쏹 䡩
Stop use immediately and contact a NISSAN certified LEAF dealer.
If the EVSE control box indicator light does not illuminate after connecting the plug to the outlet, check the
GFCI and circuit breaker for the outlet. If either the GFCI or breaker has tripped, the circuit may not be suit-
쏹 쏹 쏹
able for use with EVSE. You should have a licensed electrician inspect and repair the electrical circuit. If the
GFCI breaker is not tripped, stop using the EVSE and contact a NISSAN certified LEAF dealer.
Charging CH-31
CHARGING TROUBLESHOOTING
GUIDE
Symptom Possible cause Possible solution
The vehicle power switch is in the ON position. Before charging, place the vehicle power switch in the OFF position.
Both the normal charge connector and the quick
charge (if so equipped) connector are connected The normal charge connector and the quick charge connector cannot be connected at the same time.
at the same time.
Charging can not be performed if the Li-ion battery is already fully charged to the charge amount that
The Li-ion battery is already charged to the charge
has been set. Charging automatically turns off if the Li-ion battery is charged to the charge amount that
amount that has been set.
has been set.
Charging cannot be per- Confirm the Li-ion battery temperature by checking the Li-ion battery temperature gauge. If the gauge
formed. The temperature of the Li-ion battery is too hot or indicates the Li-ion battery is too hot (red zone) or too cold (blue zone), charging is not possible. Allow
cold to charge. the Li-ion battery to cool or warm up before charging. For additional information, refer to “Li-ion battery
temperature gauge” in the “Instruments and controls” section of this manual.
The Li-ion battery can be charged if the vehicle electrical systems can not be turned on. If the 12-volt
The 12-volt battery is discharged. battery is discharged, charge or jump start the 12-volt battery. For additional information, refer to “Jump
starting” in the “In case of emergency” section of this manual.
The vehicle has a malfunction. The vehicle or charger may have a malfunction. Confirm if the warning light on the meter is illumi-
nated. Confirm if the indicator on the charger is indicating a malfunction. If a warning is displayed,
stop charging and contact a NISSAN certified LEAF dealer.
There is no electrical power coming from the Confirm that there has not been a power failure. Make sure the breaker is on. If an outlet with a timer
Normal charge cannot be outlet. device installed is used, power will only be available at the time set by the timer.
performed. The charge connector is not connected cor- Confirm the charge connector is connected correctly.
rectly.
Charging timer has been set. Turn off the charging timer. For additional information, refer to “Charging timer” in this section.
Immediate charge cannot be Charging does not start because the charge When the long life mode (80% charge) is set, the Li-ion battery cannot be charged more than 80%.
performed. amount has been set to 80% and the Li-ion bat- Confirm the charge percentage and if you need to charge the Li-ion battery more, change to the
tery is already charged to more than 80%. desired charge setting.
CH-32 Charging
Symptom Possible cause Possible solution
The charge cable is not connected. Connect the charge cable.
The time on the clock is wrong. The charging timer function does not start charging based on the clock located on the upper dis-
play. Confirm that the date and time shown on the charging timer screen are the same as the GPS
time and date. If the 12-volt battery is discharged or if the Li-ion battery is disconnected, the time
setting must be updated. There must be a GPS signal to adjust the timer setting clock.
The immediate charge switch has been pushed. Charging timer does not operate when immediate charge is selected.
Charging timer has not been set. Set the charging timer schedule. For additional information, refer to “Charging timer” in this section.
Charging does not start because the charging
timer start time and end time are set and the cur-
Charging timer cannot be rent time is before the set start time.
performed. Charging does not start because only the charg- Confirm when the charging timer time is set to start charging. Change the charging timer setting to the
ing timer start time is set and the current time is desired charge time or press the immediate charge button. For additional information, refer to
after the set start time. “Charging timer” in this section.
Charging does not start because only the charg-
ing timer end time is set and the current time is
after the set end time.
The charge cable is not connected. Connect the charge cable beforehand.
Charging does not start because the charge When the long life mode (80% charge) is set, the Li-ion battery cannot be charged more than 80%.
amount has been set to 80% and the Li-ion bat- Confirm the charge percentage and if you need to charge the Li-ion battery more, change to the
tery is already charged to more than 80%. desired charge setting.
Charging CH-33
Symptom Possible cause Possible solution
There is no power coming from the outlet. There may have been a electrical power failure, or the breaker may have failed. Charging will resume
when the power source is reset.
The charge cable has been disconnected. Check that the charge cable has not been disconnected.
Both the normal charge connector and the quick If the normal charge connector and the quick charge connector are connected at the same time,
charge connector were connected at the same charging will be stopped.
Normal charge stops in the time.
middle of charging. Charging timer end time has been reached. When charging timer is set and the charge end time is reached, charging will be stopped, even if
the Li-ion battery is not fully charged.
The temperature of the Li-ion battery is too hot Confirm the Li-ion battery temperature by checking the Li-ion battery temperature gauge. If the
or too cold to charge. gauge indicates the Li-ion battery is too hot (red zone) or too cold (blue zone), charging is not pos-
sible. Allow the Li-ion battery to cool or warm up before charging. For additional information, refer to
“Li-ion battery temperature gauge” in the “Instruments and controls” section of this manual.
Incorrect charge connector connection, not fully
Check that the charge connector is connected correctly and that it is locked.
inserted or may not be locked.
The self-diagnostic function of the quick charge There is a possibility that the vehicle has a malfunction. Stop charging and contact a NISSAN certified
Quick charge cannot be per- device returns a negative result. LEAF dealer.
formed. Charging does not start because the charge When the long life mode (80% charge) is set, the Li-ion battery cannot be charged more than 80%.
amount has been set to 80% and the Li-ion battery Confirm the charge percentage and if you need to charge the Li-ion battery more, change to the desired
is already charged to more than 80%. charge setting.
The power switch of the quick charger is off. Check the power switch of the quick charger.
Charging will stop depending on the timer function setting of the quick charge device. If you need to
charge the Li-ion battery more, start the charging procedure again.
Quick charge stops in the Charging is stopped by the quick charge timer.
The maximum time for quick charge is 30–60 minutes. If you need to charge the Li-ion battery for longer
middle of charging.
than this, start the charging procedure again.
The power supply for the quick charger is off. Check whether the power supply for the quick charger is off.
CH-34 Charging
1 Safety–Seats, seat belts and
supplemental restraint system
Front manual seat adjustment To recline the seatback, pull the lever up and lean Pull up or push down the adjusting lever to adjust
back. To bring the seatback forward, pull the lever the seat height to the preferred position.
Your vehicle seats can be adjusted manually. For up and lean your body forward. Release the lever
additional information about adjusting the seats, to lock the seatback in position.
refer to the steps outlined in this section.
The reclining feature allows adjustment of the
Forward and backward:
seatback for occupants of different sizes for
Pull the bar up and hold it while sliding the seat added comfort and to help obtain proper seat
forward or backward to the preferred position. belt fit. For additional information, refer to “Pre-
Release the bar to lock the seat in position. cautions on seat belt usage” in this section. Also,
the seatback can be reclined to allow occupants
to rest when the vehicle is stopped and the
vehicle is in the P (Park) position or N (Neutral)
position with the parking brake applied.
REAR SEATS
WARNING
Folding
• Do not fold down the rear seats when
Before folding the rear seats: occupants are in the rear seat area or
• Secure the seat belts on the seat belt hooks any objects are on the rear seats.
located on the side wall. For additional informa- • Never allow anyone to ride in the cargo
tion, refer to “Seat belt hooks” in this section. area or on the rear seats when they are
in the folded-down position. Use of
To fold down the seatback, pull the release knob. these areas by passengers without
To return the seatback to the seating position, lift proper restraints could result in seri-
up each seatback and push it to the upright ous injury or death in an accident or
position until it is latched. sudden stop.
WARNING
Never let a child stand or kneel on any
seat and do not allow a child in the cargo
areas. The child could be seriously in-
jured or killed in an accident or sudden
stop.
WARNING
• If the tonneau cover (if so equipped)
contacts the top tether strap when it is
attached to the top tether anchor, re-
move the tonneau cover (if so
equipped) from the vehicle or secure it
on the cargo floor below its attach-
ment location. If the tonneau cover (if
so equipped) is not removed, it may
damage the top tether strap during a
collision. Your child could be seriously
injured or killed in a collision if the
LATCH webbing-mounted attachment LATCH rigid-mounted attachment child restraint top tether strap is dam-
Installing child restraint LATCH lower When installing a child restraint, carefully read aged.
anchor attachments and follow the instructions in this manual and • Do not allow cargo to contact the top
those supplied with the child restraint. tether strap when it is attached to the
LATCH compatible child restraints include two top tether anchor. Properly secure the
rigid or webbing-mounted attachments that can cargo so it does not contact the top
be connected to two anchors located at certain tether strap. Cargo that is not properly
seating positions in your vehicle. With this sys- secured or that contacts the top tether
tem, you do not have to use a vehicle seat belt to strap may damage the top tether strap
secure the child restraint. Check your child re- during a collision. Your child could be
straint for a label stating that it is compatible with seriously injured or killed in a collision
if the child restraint top tether strap is
the LATCH system. This information may also be
damaged.
in the instructions provided by the child restraint
manufacturer.
WARNING
The three-point seat belt with Automatic
Locking Retractor (ALR) must be used
when installing a child restraint. Failure
to use the ALR mode will result in the
Rear-facing — step 4 child restraint not being properly se-
cured. The restraint could tip over or be
4. After attaching the child restraint, test it before loose and cause injury to a child in a
you place the child in it. Push it from side to side sudden stop or collision. Also, it can
while holding the seat near the LATCH attach- change the operation of the front passen-
ment path. The child restraint should not move ger air bag. For additional information,
more than 1 inch (25 mm), from side to side. Try refer to “Front passenger air bag and
to tug it forward and check to see if the LATCH status light” in this section.
attachment holds the restraint in place. If the
For additional information, refer to all Warnings
restraint is not secure, tighten the LATCH at-
and Cautions in the “Child safety” and “Child
tachment as necessary, or put the restraint in
restraints” sections of this manual before install-
another seat and test it again. You may need to
ing a child restraint.
try a different child restraint or try installing by
using the vehicle seat belt (if applicable). Not all
child restraints fit in all types of vehicles.
FORWARD-FACING CHILD
RESTRAINT INSTALLATION USING
LATCH
For additional information, refer to all Warnings
and Cautions in “Child safety” and “Child re-
straints” sections of this manual before installing
a child restraint. Forward-facing webbing-mounted — step 2 Forward-facing rigid-mounted — step 2
Do not use the lower anchors if the combined 2. Secure the child restraint anchor attachments 3. The back of the child restraint should be se-
weight of the child and the child restraint exceeds to the LATCH lower anchors. Check to make cured against the vehicle seatback.
65 lbs (29.5 kg). If the combined weight of the sure that the LATCH attachment is properly If necessary, remove the head restraint/
child and the child restraint is greater than 65 lbs attached to the lower anchors. headrest to obtain the correct child restraint
(29.5 kg), use the vehicle’s seat belt (not the
If the child restraint is equipped with a top fit. If the head restraint/headrest is removed,
lower anchors) to install the child restraint. Be
tether strap, route the top tether strap and store it in a secure place. Be sure to reinstall
sure to follow the child restraint manufacturer’s
secure the tether strap to the tether anchor the head restraint/headrest when the
instructions for installation.
point. For additional information, refer to “In- child restraint is removed. For additional
Follow these steps to install a forward-facing stalling top tether strap” in this section. Do not information about head restraint/headrest ad-
child restraint using the LATCH system: install child restraints that require the use of a justment, refer to “Head restraints/headrests”
1. Position the child restraint on the seat. Always top tether strap in seating positions that do not in this section.
follow the child restraint manufacturer’s have a top tether anchor.
instructions.
1-28 Safety–Seats, seat belts and supplemental restraint system
If the seating position does not have an adjust-
able head restraint/headrest and it is interfer-
ing with the proper child restraint fit, try an-
other seating position or a different child
restraint.
10. If the child restraint is installed on the front Installing top tether strap
passenger seat, push the power switch to
the ON position. The front passenger air bag
䊊
1 Top tether strap
WARNING
To avoid injury to a child, do not use the
lap/shoulder belt Automatic Locking Re-
tractor (ALR) mode when using a booster
seat with the seat belts.
For additional information, refer to all Warnings
and Cautions in “Child safety”, “Child restraints”
and “Booster seats” sections of this manual be-
fore installing a child restraint.
Follow these steps to install a booster seat on the
rear seat or in the front passenger seat: Front passenger seat Front passenger seat
1. If you must install a booster seat in the If necessary, adjust or remove the head
front seat, move the seat to the rearmost restraint/headrest to obtain the correct
position. booster seat fit. If the head restraint/headrest
2. Position the booster seat on the seat. Only is removed, store it in a secure place. Be sure
place it in the forward-facing direction. Al- to reinstall the head restraint/headrest
ways follow the booster seat manufacturer’s when the booster seat is removed. For
instructions. additional information about head restraint/
3. The booster seat should be positioned on the headrest adjustment, removal and installation,
vehicle seat so that it is stable. refer to “Head restraints/headrests” in this
section.
WARNING
• Never let children ride unrestrained or
extend their hands or face out of the
window. Do not attempt to hold them
in your lap or arms. Some examples of
dangerous riding positions are shown
in the illustrations.
• Children may be severely injured or
killed when the front air bags, side air
bags or curtain air bags inflate if they
are not properly restrained. Pre-teens
and children should be properly re-
strained in the rear seat, if possible.
• Even with the NISSAN Advanced Air
Bag System, never install a rear-facing
child restraint on the front seat. An
inflating front air bag could seriously
injure or kill your child. For additional
information, refer to “Child restraints”
in this section.
WARNING
Front seat-mounted side-impact supple-
mental air bags and roof-mounted cur-
tain side-impact supplemental air bags:
• The side air bags and curtain air bags
ordinarily will not inflate in the event of
a frontal impact, rear impact, rollover
or lower severity side collision. Always
wear your seat belts to help reduce the
risk or severity of injury in various
kinds of accidents.
the crash severity. Additionally, the front passen- Front air bags, along with the use of seat belts, Front passenger air bag and status
ger air bag may be automatically turned OFF help to cushion the impact force on the head and light
under some conditions, depending on the weight chest of the front occupants. They can help save
detected on the passenger seat and how the seat lives and reduce serious injuries. However, an
belt is used. If the front passenger air bag is OFF, inflating front air bag may cause facial abrasions WARNING
the passenger air bag status light will be illumi- or other injuries. Front air bags do not provide The front passenger air bag is designed
nated (if the seat is unoccupied, the light will not restraint to the lower body. to automatically turn OFF under some
be illuminated, but the air bag will be off). For Even with NISSAN Advanced Air Bags, seat conditions. Read this section carefully to
additional information, refer to “Front passenger belts should be correctly worn and the driver and learn how it operates. Proper use of the
air bag and status light” in this section. One front seat, seat belt and child restraints is nec-
front passenger seated upright as far as practical
air bag inflating does not indicate improper per- essary for most effective protection. Fail-
away from the steering wheel or instrument ure to follow all instructions in this
formance of the system. panel. The front air bags inflate quickly in order to manual concerning the use of seats, seat
If you have any questions about your air bag help protect the front occupants. Because of this, belts and child restraints can increase the
system, contact NISSAN or a NISSAN certified the force of the front air bag inflating can increase risk or severity of injury in an accident.
LEAF dealer. If you are considering modification the risk of injury if the occupant is too close to, or
of your vehicle due to a disability, you may also is against, the air bag module during inflation.
contact NISSAN. Contact information is con- The front air bags deflate quickly after a collision.
tained in the front of this Owner’s Manual.
The front air bags operate only when the
When a front air bag inflates, a fairly loud noise power switch is in the ON position.
may be heard, followed by release of smoke. This
smoke is not harmful and does not indicate a fire. After the power switch is placed in the ON
Care should be taken not to inhale it, as it may position, the supplemental air bag warning
cause irritation and choking. Those with a history light illuminates. The supplemental air bag
of a breathing condition should get fresh air warning light will turn off after about 7
promptly. seconds if the system is operational.
After the power switch is placed in the “ON” Front passenger air bag
position, the front passenger air bag status light The front passenger air bag is designed to auto-
on the instrument panel illuminates for about 7 matically turn OFF when the vehicle is operated
seconds and then turns off or remains illuminated under some conditions as described below in
depending on the front passenger seat occupied accordance with U.S. regulations. If the front
status. The light operates as follows: passenger air bag is OFF, it will not inflate in a
• Unoccupied front passenger’s seat: The crash. The driver air bag and other air bags in your
light is OFF and the front passenger air bag is vehicle are not part of this system.
OFF and will not inflate in a crash.
The purpose of the regulation is to help reduce
• Front passenger seat occupied by a small adult, the risk of injury or death from an inflating air bag
child or child restraint as outlined in this section: to certain front passenger seat occupants, such
The light illuminates to indicate that the as children, by requiring the air bag to be auto-
front passenger air bag is OFF and will not matically turned OFF. Certain sensors are used to
Front passenger air bag status light inflate in a crash. meet the requirements.
Status light • Occupied front passenger seat and the pas-
The occupant classification sensor in this vehicle
The front passenger seat is equipped with an senger meet the conditions as outlined in this
is a weight sensor. It is designed to detect an
occupant classification sensor (weight sensor) section: The light is OFF to indicate that
occupant and objects on the seat by weight. For
that turns the front passenger air bag on or off the front passenger air bag is operational.
example, if a child is in the front passenger seat,
depending on the weight applied to the front In addition to the above, certain objects placed the NISSAN Advanced Air Bag System is de-
passenger seat. The status of the front passen- on the front passenger seat may also cause the signed to turn the front passenger air bag OFF in
ger air bag (ON or OFF) is indicated by the front light to operate as described above depending accordance with the regulations. Also, if a child
passenger air bag status light which is on their weight. restraint of the type specified in the regulations is
located on the instrument panel. on the seat, its weight and the child’s weight can
For additional information related to the normal
operation and troubleshooting of this occupant be detected and cause the air bag to turn OFF.
classification sensor system, please refer to Front passenger seat adult occupants who are
“Normal operation” and “Troubleshooting” in this properly seated and using the seat belt as out-
section. lined in this manual should not cause the front
1-46 Safety–Seats, seat belts and supplemental restraint system
** Click HERE to see "Owner's Manual Supplement" **
passenger air bag to be automatically turned If the front passenger seat is not occupied, the inflate in a crash), it could be that the child
OFF. For small adults it may be turned OFF, front passenger air bag is designed not to inflate restraint or seat belt is not being used properly.
however if the occupant takes his/her weight off in a crash. However, heavy objects placed on the Make sure that the child restraint is installed
the seat cushion (for example, by not sitting up- seat could result in air bag inflation, because of properly, the seat belt is used properly and the
right, by sitting on an edge of the seat, or by the object’s weight being detected by the occu- occupant is positioned properly. If the front pas-
otherwise being out of position), this could cause pant classification sensor. Other conditions senger air bag status light is still not illuminated,
the sensors to turn the air bag OFF. Always be could also result in air bag inflation, such as if a reposition the occupant or child restraint in a rear
sure to be seated and wearing the seat belt child is standing on the seat, or if two children are seat.
properly for the most effective protection by the on the seat, contrary to the instructions in this If the front passenger air bag status light will not
seat belt and supplemental air bag. manual. Always be sure that you and all vehicle illuminate even though you believe that the child
NISSAN recommends that pre-teens and chil- occupants are seated and restrained properly. restraint, the seat belts and the occupant are
dren be properly restrained in a rear seat. Using the front passenger air bag status light, you properly positioned, the system may be sensing
NISSAN also recommends that appropriate child can monitor when the front passenger air bag is an unoccupied seat (in which case the air bag is
restraints and booster seats be properly installed automatically turned OFF with the seat occupied. OFF). A NISSAN certified LEAF dealer can
in a rear seat. If this is not possible, the occupant The light will not illuminate when the front pas- check that the system is OFF by using a special
classification sensor is designed to operate as senger seat is unoccupied. tool. However, until you have confirmed with a
described above to turn the front passenger air If an adult occupant is in the seat but the front dealer that your air bag is working properly, repo-
bag OFF for specified child restraints as required passenger air bag status light is illuminated (indi- sition the occupant or child restraint in a rear seat.
by regulations. Failing to properly secure child cating that the air bag is OFF), it could be that the The NISSAN Advanced Air Bag System and front
restraints and to use the ALR mode may allow the person is a small adult, or is not sitting on the seat passenger air bag status light will take a few
restraint to tip or move in a collision or sudden properly or not using the seat belt properly. seconds to register a change in the front passen-
stop. This can also result in the front passenger ger seat status. For example, if a large adult who
air bag inflating in a crash instead of being OFF. If a child restraint must be used in the front seat,
the front passenger air bag status light may or is sitting the front passenger seat exits the ve-
For additional information about proper use and hicle, the front passenger air bag status light will
installation, refer to “Child restraints” in this sec- may not be illuminated, depending on the size of
the child and the type of child restraint being go from OFF to ON for a few seconds and then to
tion. OFF. This is normal system operation and does
used. If the front passenger air bag status light is
not illuminated (indicating that the air bag might not indicate a malfunction.
NOTE: • Forcing the front seat or seatback against an This may be due to the following conditions
A system check will be performed during object on the seat or floor behind it. that may be interfering with the weight sen-
which the front passenger air bag status • An object placed under the front passenger sors:
light will remain lit for about 7 seconds seat. • Small adult or child is not sitting upright,
initially. • An object placed between the seat cushion leaning against the seatback, and centered
If the light is ON after this, the vehicle should and center console or between the seat on the seat cushion with his/her feet comfort-
be checked by a NISSAN certified LEAF cushion and the door. ably extended to the floor.
dealer as soon as possible. If the vehicle is moving, please come to a stop • The child restraint is not properly installed, as
2. If the light is ON with an adult occupying the when it is safe to do so. Check and correct any outlined in the “Child restraints” section of
front passenger seat: of the above conditions. Restart the vehicle this manual.
• Occupant is a small adult — the air bag light and wait 1 minute. • An object weighting over 2.2 lbs (1kg) hang-
is functioning as intended. The front passen- ing on the seat or placed in the seatback
NOTE: pocket.
ger air bag is suppressed.
A system check will be performed during • A child restraint or other object pressing
However, if the occupant is not a small adult, which the front passenger air bag status against the rear or the seatback.
then this may be due to the following condi- light will remain lit for about 7 seconds
tions that may be interfering with the weight • A rear passenger pushing or pulling on the
initially.
sensors: seatback of the front passenger seat.
If the light is still ON after this, the person • Forcing the front seat or seatback against an
• Occupant is not sitting upright, leaning should be advised not to ride in the front
against the seatback, and centered on the object on the seat or floor behind it.
passenger seat and the vehicle should be
seat cushion with his/her feet comfortably • An object placed under the front passenger
checked by a NISSAN certified LEAF dealer
extended to the floor. seat.
as soon as possible
• A child restraint or other object pressing • An object placed between the seat cushion
3. If the light is OFF with a small adult, child or
against the rear of the seatback. and center console.
child restraint occupying the front passenger
• A rear passenger pushing or pulling on the seat. If the vehicle is moving, please come to a stop
back of the front passenger seat. when it is safe to do so. Check and correct any of
This vehicle is equipped with an upper display 5. Outside air temperature (P. 2-10)
and a lower display. 6. Turn signal/Hazard indicator light (P. 2-21)
7. Li-ion battery capacity level gauge (P. 2-10)
1. Master warning lights (P. 2-18)
8. Li-ion battery available charge gauge
2. ECO indicator (P. 2-10)
(P. 2-9)
3. Speedometer (P. 2-6)
9. Driving range (P. 2-8)
4. Clock (P. 2-11)
10. Vehicle information display (P. 2-22)
Instruments and controls 2-5
Changing the display:
Pushing the TRIP switch 䊊 3 located on the left
side of the combination meter panel changes the
display as follows:
TRIP A → TRIP B → TRIP A
For additional information about the vehicle infor-
mation display, refer to “Vehicle information dis-
play” in this section.
Resetting the trip odometer:
Pushing the TRIP switch 䊊 3 for approximately 1
second resets the trip odometer to zero.
12-volt battery charge warning light Low battery charge warning light Front passenger air bag status light
or Anti-lock Braking System (ABS) warning light Low tire pressure warning light High beam indicator light (blue)
BRAKE system warning light (yellow) Power steering warning light Power limitation indicator light
or BRAKE warning light (red) Seat belt warning light READY to drive indicator light
Electric shift control system warning light Supplemental air bag warning light Security indicator light
EV system warning light ECO mode switch indicator light Slip indicator light
CHECKING LIGHTS WARNING LIGHTS parking brake”. When these messages flash, im-
mediately stop the vehicle in a safe location, pull
With all doors closed, apply the parking brake, 12-volt battery charge the parking brake switch and push the P (Park)
fasten the seat belts and place the power switch warning light position switch on the shift lever to place the
for Leaf to the ON position without starting the
The DC/DC converter converts 400 volt Li-ion vehicle in the P (Park) position. The warning on
engine. The following lights (if so equipped) will
battery voltage to charge the 12-volt battery. the meter and the chime stops when the parking
come on:
brake is operated or the vehicle is in the P (Park)
This light illuminates continuously after the bulb is
, position. Contact a NISSAN certified LEAF
checked when the power switch is in the ON
The following lights (if so equipped) come on dealer for support.
position, and turns off when the power switch is
briefly and then turn off: placed in the READY to drive position. CAUTION
(yellow), , (red), , When this warning light illuminates, a chime • The DC/DC converter system may not
, , , , , sounds and the following warnings are also dis- be functioning properly if the 12-volt
If any light does not come on or operate in a way played. battery charge warning light illumi-
other than described, it may indicate a burned-out • Master warning (red) nates continuously when the power
bulb and/or a system malfunction. Have the system switch is in the READY to drive posi-
• EV system warning light tion. Immediately stop the vehicle in a
checked by a NISSAN certified LEAF dealer.
The following messages also flash on and off on safe location and contact a NISSAN
Some indicators and warnings are also displayed the vehicle information display. certified LEAF dealer.
on the vehicle information display. For additional
information, refer to “Vehicle information display” If the vehicle is being driven; “Stop the vehicle”
in this section. and if the vehicle is stopped; “When parked apply
Charging time
TRIP COMPUTER
Displays the estimated time to a full Li-ion charge
Switches for the trip computer are located on the based on the Charging Mode selected.
left side of the combination meter panel. To op-
erate the trip computer, push the following The time needed to charge the Li-ion battery
switches: charges based on:
䊊A switch • Outside temperature
䊊B switch • Li-ion battery temperature
• Available electrical power supplied to the
When the power switch is pushed to the ON charger
position, modes of the trip computer can be
selected by pushing the switch 䊊
A.
1. The notification is displayed on the upper left 2. The system displays a message screen and
side of the STATUS screen. Touch [Show] to announces the contents of the message to
display the screen showing detailed warn that the Li-ion battery power level is low.
information. Check the message displayed on the screen.
Touch [Nearby Stations] to search all charg-
ing stations that are located around the cur-
rent vehicle position.
3. Touch [BACK] or push the MAP button to
return to the vehicle location screen.
CAUTION
• Do not operate the washer continu-
ously for more than 30 seconds.
• Do not operate the washer if the
windshield-washer fluid reservoir is
Security Indicator Light empty.
The security indicator light is located on the me- • Do not fill the windshield-washer fluid
ter panel. It indicates the status of the NISSAN reservoir with windshield-washer fluid
Vehicle Immobilizer System. concentrates at full strength. Some
methyl alcohol based windshield-
The light blinks after the power switch was in the washer fluid concentrates may perma-
ACC or OFF position. This function indicates the nently stain the grille if spilled while
security systems equipped on the vehicle are filling the windshield-washer fluid res-
operational. ervoir.
If the NISSAN Vehicle Immobilizer System is mal-
functioning, this light will remain on while the
power switch is in the ON position.
䊊
1 Intermittent — intermittent operation can be
adjusted by turning the knob toward 䊊 A
(Slower) or 䊊B (Faster).
䊊
2 Low — continuous low speed operation
䊊
3 High — continuous high speed operation
䊊
4 MIST — one sweep operation of the wiper
WARNING
turer’s recommended levels before Push the switch forward 䊊 3 to operate the
pouring the fluid into the windshield- washer. Then the wiper will also operate several
In freezing temperatures the windshield- washer fluid reservoir. Do not use the times.
washer fluid may freeze on the rear win- windshield-washer fluid reservoir to
dow glass and obscure your vision. Warm mix the windshield-washer fluid con-
the rear window with the defroster before centrate and water.
you wash the rear window.
CAUTION
When cleaning the inner side of the rear
window, be careful not to scratch or dam-
age the rear window defroster.
Type A (if so equipped)
The instrument brightness control switch can be
operated when the power switch is in the ON
position. When the switch is operated, the ve-
hicle information display switches to the bright-
ness adjustment mode.
Push the switch 䊊1 to display the setting menu of
the brightness control on the vehicle information
display.
Push the 䊊 1 switch to move the bar to the + side.
If the bar reaches the maximum brightness, a
chime will sound. If the switch 䊊
1 is pushed again
when the brightness is at the maximum setting,
Type B (if so equipped) the instrument lights turn off.
To turn the fog lights on, rotate the headlight The heated steering wheel system is designed to
switch to the position, then rotate the operate only when the surface temperature of the
switch to the position. To turn them off, steering wheel is below approximately 68°F
rotate the switch to the OFF position. (20°C).
The headlights must be on for the fog lights to Push the heated steering wheel switch to warm
operate. the steering wheel when the power switch is in
the ON position. The indicator light 䊊
1 on the
switch will illuminate.
To open the charge port lid, push the charge port To lock or unlock the charge connector, push the
lid switch. For additional information, refer to charge connector lock switch. For additional in-
“Charge port lid” in the “Pre-driving checks and formation, refer to “Charge connector lock
adjustments” section of this manual. switch” in the “Charging” section of this manual.
WARNING
• Never put anything on the tonneau
cover, no matter how small. Any object
on it could cause an injury in an acci-
dent or sudden stop.
• Do not leave the tonneau cover in the
vehicle with it disengaged from the
holder.
• Properly secure all cargo with ropes or
straps to help prevent it from sliding or
GLOVE BOX shifting. Do not place cargo higher
To open the glove box, pull the handle.
CONSOLE BOX than the seatbacks. In a sudden stop or
To open the console box, pull up the lever 䊊A and collision, unsecured cargo could cause
To close, push the lid in until it latches. personal injury.
pull up the lid. To close, push the lid down until it
• Your child could be seriously injured or
is latched. killed in a collision if the child restraint
WARNING
top tether strap is damaged.
Keep the glove box lid closed while driv-
ing to prevent injury in case of an acci-
dent or a sudden stop.
To remove the tonneau cover: 4. Slide down the tonneau cover along the rear
seat back.
1. Remove the straps from the rear hatch.
5. Remove the tonneau cover by pulling either
2. Pull up the tonneau cover.
the left or right side backward away from the
3. Remove the tonneau cover holders from the pillar.
rear pillar.
2-54 Instruments and controls
WINDOWS
POWER WINDOWS The power windows operate when the power
switch is in the ON position, or for about 45
seconds after the power switch is placed in the
WARNING OFF position. If the driver’s or front passenger’s
• Make sure that all passengers have door is opened during this period of about 45
their hands, etc. inside the vehicle seconds, power to the windows is canceled.
while it is in motion and before closing
the windows. Use the window lock
switch to prevent unexpected use of
the power windows.
• Do not leave children unattended in-
side the vehicle. They could unknow-
ingly activate switches or controls and
become trapped in the window. Unat-
tended children could become in-
STOWING GOLF BAGS volved in serious accidents.
• Do not leave children or adults who
Normally, two standard golf bags can be stowed would normally require the assistance
in the cargo area. Insert the top of the golf bag of others alone in your vehicle. Pets
into the right side of the cargo area 䊊 1 then rotate should also not be left alone. They
the bag backward 䊊 2 . Insert the top of the sec- could accidentally injure themselves or
ond golf bag into right side of the cargo area 䊊 3 others through inadvertent operation
and stow the bottom of golf bag forward all the of the vehicle. Also, on hot, sunny days,
way 䊊 4 . temperatures in a closed vehicle could
quickly become high enough to cause
In some cases, you may not be able to stow two severe or possibly fatal injuries to
golf bags in your vehicle, depending on their sizes people or animals.
or types.
Main power window switch (driver’s Passenger side power window switch
side) The passenger’s side power window switch will
1. Driver side window open or close only the corresponding window. To
2. Front passenger side window open or close the window, push down or pull up
3. Rear left passenger side window the switch and hold it.
4. Rear right passenger side window
5. Window lock button
To open or close a window, push down 䊊 A or pull
up 䊊B the corresponding switch and hold it. The
main switches, on the driver’s side, will open or
close all the windows.
CAUTION
Do not use for extended periods of time
with the power switch in the OFF posi-
tion. This could result in a discharged
12-volt battery.
MAP LIGHTS
ROOM LIGHT
Press the button to turn the map lights on. To turn
them off, press the button again. The room light switch has three positions: ON,
DOOR and OFF.
ON position
When the switch is in the ON position 䊊
1 , the
ceiling light will illuminate.
A key number is only necessary when you have Be sure to carry the Intelligent Key with
you when driving. The Intelligent Key is a
lost all keys and do not have one to duplicate
precision device with a built-in transmit-
from. If you still have a key, this key can be ter. To avoid damaging it, please note the
duplicated by a NISSAN certified LEAF dealer. following.
NOTE: • The Intelligent Key is water resistant;
however, wetting may damage the In-
Do not leave the keys inside the vehicle
NISSAN INTELLIGENT KEY® telligent Key. If the Intelligent Key gets
when leaving the vehicle. wet, immediately wipe until it is com-
1. Intelligent Key (two sets) pletely dry.
2. Mechanical key (inside Intelligent Key) • Do not bend, drop or strike it against
3. Key number plate (one plate) another object.
• If the outside temperature is below
Your vehicle can only be driven with the Intelligent
14°F (-10°C) degrees, the battery of the
Keys which are registered to your vehicle’s Intel- Intelligent Key may not function prop-
ligent Key system components and NISSAN Ve- erly.
hicle Immobilizer System components. • Do not place the Intelligent Key for an
As many as four Intelligent Keys can be regis- extended period in a place where tem-
tered and used with one vehicle. The new keys peratures exceed 140°F (60°C).
• Do not change or modify the Intelligent
must be registered by a NISSAN certified LEAF
Key.
dealer prior to use with the Intelligent Key system • Do not use a magnet key holder.
and NISSAN Vehicle Immobilizer System of your
When the front door is locked, pulling the front front passenger’s door open, then close the door.
door handle will unlock the front door. When locking the door this way, be sure not
When locking the door without a key, be to leave the key inside the vehicle.
sure not to leave the key inside the vehicle. To unlock the doors, push the power door lock
switch to the unlock position 䊊
2 .
DOOR LOCKS/UNLOCKS
PRECAUTION
• Do not push the door handle request switch
with the Intelligent Key held in your hand as
illustrated. The close distance to the door
handle will cause the Intelligent Key system to
have difficulty recognizing that the Intelligent
Key is outside the vehicle.
• After locking with the door handle request
switch, verify the doors are securely locked by
testing them.
NISSAN INTELLIGENT KEY®
OPERATION
䊊
2 UNLOCK button Intelligent Key once. For additional information, refer to ⬙Opening
䊊
3 CHARGE PORT UNLOCK 2. The hazard indicator flashes once. The driv- charge port lid⬙ in this section.
䊊
4 PANIC button er’s door will unlock.
When you lock or unlock the doors, the hazard 3. Press the UNLOCK button on the
indicator will flash and the horn will sound as a Intelligent Key again within one minute.
confirmation. For additional information, refer to 4. The hazard indicator flashes once again. All
“Hazard warning flasher switch” in the “In case of the doors and the rear hatch will unlock.
emergency” section and “Horn” in the “Instru-
ments and controls” sections of this manual.
CAUTION
Make sure that the charge port lid is
completely closed and latched before
driving. Failure to do so could cause the
lid to open suddenly during driving.
Switch
SECONDARY REAR HATCH
RELEASE
The secondary rear hatch release mechanism
allows the rear hatch to be opened in the event of
a discharged battery, etc.
Push the lever to the right to open the rear hatch
with a suitable tool.
If you had to open the rear hatch using this
lever, have the vehicle checked by a
NISSAN certified LEAF dealer as soon as
possible.
Button
When opening the charge port lid perform one of CHARGE PORT CAP
the following:
When opening the charge port cap, press the tab
• Push the charge port lid opener switch located inward and the cap will spring open.
on the instrument panel, or
When the charge port cap is closed to its previ-
• Press and hold the charge port lid unlock button
ous position, it will lock automatically.
on the Intelligent Key for more than one second.
When opening the charge port lid:
1. The charging status indicator lights flash and
a chime sounds three times and the charge
port lid will then spring up slightly.
2. Put your hand into the under side of the lid and
open until it is in the fully open position.
CAUTION WARNING
• When charging is finished, be sure to • Do not adjust the steering wheel while
close the charge port cap. If water or driving. You could lose control of your
dust gets inside the charge port, this vehicle and cause an accident.
may cause a malfunction. • Do not adjust the steering wheel any
• Pay particular attention when using closer to you than is necessary for
the normal charge port as the charge proper steering operation and comfort.
port lid can be closed even when the The driver’s air bag inflates with great
normal charge port cap is open. force. If you are unrestrained, leaning
• Close the quick charge (if so equipped) forward, sitting sideways or out of po-
port cap before closing the charging sition in any way, you are at greater
lid. The quick charge port cap can be risk of injury or death in a crash. You
damaged if it is open when closing the may also receive serious or fatal inju-
charge port lid. ries from the air bag if you are up
against it when it inflates. Always sit TILT OPERATION
back against the seatback and as far
Push the lock lever down 䊊1 and adjust the
away as practical from the steering
wheel. Always use the seat belts. steering wheel up or down 䊊2 to the desired
position.
Pull the lock lever up 䊊
3 to lock the steering
wheel in place.
CAUTION
• Do not store the sun visor before re-
turning the extension to its original
position.
• Do not pull the extension sun visor
forcedly downward.
VANITY MIRROR
To use the front vanity mirror, pull down the sun
visor and pull up the cover.
䊊
1 To block out glare from the front, swing down
the sun visor.
䊊
2 To block glare from the side, remove the sun
visor from the center mount and swing it to the
side.
Do not allow any object to cover the sen- Objects viewed in the outside mirror on
the passenger side are closer than they
sors 䊊
E or apply glass cleaner on them.
appear. Be careful when moving to the
Doing so will reduce the sensitivity of the right. Using only this mirror could cause
sensor, resulting in improper operation. an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.
RearView Monitor (if so equipped) . . . . . . . . . . . . .4-3 Heater and air conditioner (automatic) . . . . . . . . . .4-22
RearView Monitor system operation . . . . . . . . . .4-4 Operating tips . . . . . . . . . . . . . . . . . . . . . .4-24
How to read the displayed lines. . . . . . . . . . . . .4-5 Air Conditioner Filter . . . . . . . . . . . . . . . . . .4-25
Difference between predicted and actual Automatic climate control
distances . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 (models without Navigation System) . . . . . . . . .4-26
How to park with predicted course lines Automatic climate control
(models with navigation) . . . . . . . . . . . . . . . . .4-7 (models with Navigation System) . . . . . . . . . . .4-33
Adjusting the screen . . . . . . . . . . . . . . . . . . .4-8 Servicing climate control . . . . . . . . . . . . . . . .4-38
How to turn on and off predicted course lines Audio system (models without Navigation System). . .4-38
(models with navigation) . . . . . . . . . . . . . . . . .4-9 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . .4-38
RearView Monitor system limitations . . . . . . . . . .4-9 FM radio reception . . . . . . . . . . . . . . . . . . .4-39
System maintenance . . . . . . . . . . . . . . . . . .4-10 AM radio reception . . . . . . . . . . . . . . . . . . .4-39
Around View® Monitor (if so equipped) . . . . . . . . .4-11 Satellite radio reception . . . . . . . . . . . . . . . .4-40
Around View® Monitor system operation . . . . . .4-12 Audio operation precautions . . . . . . . . . . . . . .4-40
Difference between predicted and actual FM-AM-SAT radio with compact disc (CD)
distances . . . . . . . . . . . . . . . . . . . . . . . . .4-15 player . . . . . . . . . . . . . . . . . . . . . . . . . . .4-47
How to park with predicted course lines . . . . . . .4-17 USB (Universal Serial Bus) connection port
How to switch the display . . . . . . . . . . . . . . .4-18 (models without Navigation System) . . . . . . . . .4-51
Adjusting the screen . . . . . . . . . . . . . . . . . .4-19 iPod® player operation
Around View® Monitor system limitations . . . . . .4-19 (models without Navigation System) . . . . . . . . .4-53
System Maintenance . . . . . . . . . . . . . . . . . .4-21 Bluetooth® streaming audio
Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-21 (models without Navigation System) . . . . . . . . .4-55
Center vents . . . . . . . . . . . . . . . . . . . . . . .4-21 Aux device player operation . . . . . . . . . . . . . .4-55
Side vents . . . . . . . . . . . . . . . . . . . . . . . .4-22
CD Care and cleaning . . . . . . . . . . . . . . . . .4-56 Making A Call . . . . . . . . . . . . . . . . . . . . . .4-65
Steering wheel switch for audio control . . . . . . .4-56 Receiving A Call . . . . . . . . . . . . . . . . . . . . .4-66
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . .4-57 During A Call. . . . . . . . . . . . . . . . . . . . . . .4-66
NissanConnectsm Mobile Apps Ending A Call . . . . . . . . . . . . . . . . . . . . . .4-66
(models without navigation system). . . . . . . . . .4-57 Text Messaging . . . . . . . . . . . . . . . . . . . . .4-67
Car phone or CB radio . . . . . . . . . . . . . . . . .4-58 Bluetooth® Settings . . . . . . . . . . . . . . . . . .4-68
Bluetooth® hands-free phone system without navigation Manual Controls . . . . . . . . . . . . . . . . . . . . .4-69
system (if so equipped). . . . . . . . . . . . . . . . . . .4-59 Troubleshooting Guide . . . . . . . . . . . . . . . . .4-70
Regulatory information . . . . . . . . . . . . . . . . .4-61 Bluetooth® Hands-Free Phone System With Navigation
Using the system . . . . . . . . . . . . . . . . . . . .4-61 System (if so equipped) . . . . . . . . . . . . . . . . . .4-71
Control buttons . . . . . . . . . . . . . . . . . . . . .4-62 Nissan Voice Recognition System (if so equipped). . .4-71
Connecting procedure . . . . . . . . . . . . . . . . .4-63
Voice Commands . . . . . . . . . . . . . . . . . . . .4-64
REARVIEW MONITOR (IF SO
EQUIPPED)
Display screen, heater, air conditioner, audio and phone systems 4-3
REARVIEW MONITOR SYSTEM
WARNING OPERATION
Failure to follow the warnings and in- With the ignition in the ON position, move the
structions for proper use of the RearView shift lever to the R (Reverse) position or press the
Monitor system could result in serious CAMERA button (if so equipped) to operate the
injury or death.
RearView Monitor.
• RearView Monitor is a convenience fea-
ture and is not a substitute for proper
backing. Always turn and look out the
windows and check mirrors to be sure
that it is safe to move before operating
the vehicle. Always back up slowly.
• The system is designed as an aid to the
driver in showing large stationary ob-
jects directly behind the vehicle, to The RearView Monitor system automatically
help avoid damaging the vehicle. shows a rear view of the vehicle when the shift
• The distance guide line and the vehicle lever is shifted into the R (Reverse) position or
width line should be used as a reference when the CAMERA button (if so equipped) is
only when the vehicle is on a level paved pressed. The radio can still be heard while the
surface. The distance viewed on the
RearView Monitor is active.
monitor is for reference only and may be
different than the actual distance be- To display the rear view, the RearView Monitor
tween the vehicle and displayed objects. system uses a camera located just above the
vehicle’s license plate 䊊
1 .
CAUTION
Do not scratch the camera lens when
cleaning dirt or snow from the front of the
camera.
4-4 Display screen, heater, air conditioner, audio and phone systems
Predicted course lines (models with navi-
gation) 䊊
6
However, the vehicle may hit the object if it proj- actually at the same distance as the position 䊊 A.
lines are shown farther than the actual distance.
ects over the actual backing up course. The vehicle may hit the object when backing up to
Note that any object on the hill is closer than it
the position 䊊 A if the object projects over the
appears on the monitor.
actual backing up course.
4-6 Display screen, heater, air conditioner, audio and phone systems
HOW TO PARK WITH PREDICTED
COURSE LINES (MODELS WITH
NAVIGATION)
WARNING
• If the tires are replaced with different
sized tires, the predicted course lines
may be displayed incorrectly.
• On a snow-covered or slippery road,
there may be a difference between the
predicted course line and the actual
course line.
• If the battery is disconnected or be-
comes discharged, the predicted
course lines may be displayed incor-
rectly. If this occurs, please perform
the following procedures:
- Turn the steering wheel from lock to
lock while the engine is running.
- Drive the vehicle on a straight road
for more than 5 minutes.
• When the steering wheel is turned with
the ignition switch in the ACC position,
the predicted course lines may be dis- 1. Visually check that the parking space is safe
played incorrectly. before parking your vehicle.
2. The rear view of the vehicle is displayed on the
screen 䊊 A when the shift lever is moved to the
R (Reverse) position.
Display screen, heater, air conditioner, audio and phone systems 4-7
3. Slowly back up the vehicle adjusting the Note
steering wheel so that the predicted course Do not adjust any of the display set-
lines 䊊B enter the parking space 䊊 C . tings of the RearView Monitor while
4. Maneuver the steering wheel to make the the vehicle is moving. Make sure the
vehicle width guide lines 䊊 D parallel to the parking brake is firmly applied
parking space 䊊 C while referring to the pre-
dicted course lines.
5. When the vehicle is parked in the space com-
pletely, move the shift lever to the P (Park)
position and apply the parking brake.
4-8 Display screen, heater, air conditioner, audio and phone systems
HOW TO TURN ON AND OFF • The system cannot completely elimi-
PREDICTED COURSE LINES nate blind spots and may not show
(MODELS WITH NAVIGATION) every object.
• Underneath the bumper and the corner
To toggle ON and OFF the predicted course lines
areas of the bumper cannot be viewed
while in the P (Park) position: on the RearView Monitor because of
1. Touch the Settings key. its monitoring range limitation. The
2. Touch the Camera key. system will not show small objects be-
low the bumper, and may not show
3. Touch the Predicted Course Lines key to turn objects close to the bumper or on the
the feature ON or OFF. ground.
To toggle ON and OFF the predicted course lines • Objects viewed in the RearView Moni-
tor differ from actual distance because
while in the R (Reverse) position:
a wide-angle lens is used.
Models with navigation 1. Touch the touch-screen display. • Objects in the RearView Monitor will
2. Touch the Predicted Course Lines key to turn appear visually opposite compared to
1. While on a RearView Monitor screen, touch
the feature ON or OFF. when viewed in the rearview and out-
the touch-screen display. The Camera Set- side mirrors.
ting screen will come up. • Use the displayed lines as a reference.
REARVIEW MONITOR SYSTEM
2. Touch the Display Settings key. The lines are highly affected by the
LIMITATIONS number of occupants, fuel level, ve-
3. Touch the “Brightness,” “Contrast,” “Tint,”
hicle position, road conditions and
“Color,” or “Black Level” key.
road grade.
4. Adjust the item by touching the + or - key on WARNING
• Make sure that the liftgate is securely
the touch-screen display. Listed below are the system limitations closed when backing up.
for RearView Monitor. Failure to oper- • Do not put anything on the rearview
ate the vehicle in accordance with these camera. The rearview camera is in-
system limitations could result in seri- stalled above the license plate.
ous injury or death.
Display screen, heater, air conditioner, audio and phone systems 4-9
• There may be a delay when switching between
• When washing the vehicle with high
views.
pressure water, be sure not to spray it
around the camera. Otherwise, water • If dirt, rain or snow accumulate on the camera,
may enter the camera unit causing wa- RearView Monitor may not display objects
ter condensation on the lens, a mal- clearly. Clean the camera.
function, fire or an electric shock. • Do not use wax on the camera lens. Wipe off
• Do not strike the camera. It is a preci-
any wax with a clean cloth dampened with a
sion instrument. Otherwise, it may
malfunction or cause damage result- diluted mild cleaning agent, then wipe with a dry
ing in a fire or an electric shock. cloth.
4-10 Display screen, heater, air conditioner, audio and phone systems
AROUND VIEW® MONITOR (IF SO
EQUIPPED)
1. CAMERA button
Display screen, heater, air conditioner, audio and phone systems 4-11
The Around View® Monitor system is designed
WARNING as an aid to the driver in situations such as slot
parking or parallel parking. The monitor displays
Failure to follow the warnings and in-
structions for proper use of the Around various views of the position of the vehicle in a
View® Monitor system could result in split screen format. Not all views are available at
serious injury or death. all times.
• The Around View® Monitor is a conve- Available views:
nience feature and is not a substitute
for proper vehicle operation because it • Front View
has areas where objects cannot be An approximately 150–degree view of the
viewed. The four corners of the vehicle front of the vehicle.
in particular, are areas where objects • Rear View
do not always appear in the bird’s-eye,
front, or rear views. Always check your An approximately 150–degree view of the rear
surroundings to be sure that it is safe of the vehicle. To display the multiple views, the Around View®
to move before operating the vehicle. • Bird’s-Eye View Monitor system uses cameras located in the front
Always operate the vehicle slowly. grille, on the vehicle’s outside mirrors and one
The surrounding views of the vehicle from
• The driver is always responsible for
above. just above the vehicle’s license plates 䊊
1 .
safety during parking and other ma-
neuvers. • Front-Side View AROUND VIEW® MONITOR
The view around and ahead of the front pas- SYSTEM OPERATION
senger’s side wheel.
CAUTION With the ignition switch in the ON position, move
the shift lever to the R (Reverse) position or press
Do not scratch the camera lens when
cleaning dirt or snow from the front of the the CAMERA button to operate the Around
camera. View® Monitor. The screen displayed on the
Around View® Monitor will automatically return
to the previous screen 3 minutes after the CAM-
ERA button has been pressed with the shift lever
in a position other than the R (Reverse) position.
4-12 Display screen, heater, air conditioner, audio and phone systems
Available views • Objects in the rear view will appear
visually opposite compared to when
viewed in the rear view and outside
WARNING mirrors.
• The distance guide lines and the ve- • Use the mirrors or actually look to
hicle width lines should be used as a properly judge distances to other ob-
reference only when the vehicle is on a jects.
paved, level surface. The apparent dis- • On a snow-covered or slippery road,
tance viewed on the monitor may be there may be a difference between the
different than the actual distance be- predicted course lines and the actual
tween the vehicle and displayed ob- course line.
jects. • The vehicle width and predicted course
• Use the displayed lines and the bird’s lines are wider than the actual width
eye view as a reference. The lines and and course.
the bird’s-eye view are greatly affected • The displayed lines will appear slightly Front and rear view:
by the number of occupants, cargo, off to the right, because the rearview
fuel level, vehicle position, road condi- camera is not installed in the rear cen- Front view
tion and road grade. ter of the vehicle. Guiding lines that indicate the approximate ve-
• If the tires are replaced with different
hicle width and distance to objects with refer-
sized tires, the predicted course lines
and the bird’s-eye view may be dis- ence to the vehicle body lines 䊊A are displayed
Display screen, heater, air conditioner, audio and phone systems 4-13
Vehicle width guide lines 䊊
5 : Note
When the monitor displays the front view
and the steering wheel turns about 90
degrees or less from the straight-ahead
position, both the right and left predicted
course lines 䊊6 are displayed. When the
steering wheel turns about 90 degrees or
more, a line is displayed only on the
opposite side of the turn.
Display screen, heater, air conditioner, audio and phone systems 4-15
Backing up on a steep uphill Backing up on a steep downhill Backing up near a projecting object
When backing up the vehicle up a hill, the dis- When backing up the vehicle down a hill, the The predicted course lines 䊊 A do not touch the
tance guide lines and the vehicle width guide distance guide lines and the vehicle width guide object in the display. However, the vehicle may hit
lines are shown closer than the actual distance. lines are shown farther than the actual distance. the object if it projects over the actual backing up
Note that any object on the hill is further than it Note that any object on the hill is closer than it course.
appears on the monitor. appears on the monitor.
4-16 Display screen, heater, air conditioner, audio and phone systems
the position 䊊A if the object projects over the
actual backing up course.
WARNING
• If the tires are replaced with different
sized tires, the predicted course lines
may be displayed incorrectly.
• On a snow-covered or slippery road,
there may be a difference between the
predicted course line and the actual
course line.
• If the battery is disconnected or be-
comes discharged, the predicted
course lines may be displayed incor-
rectly. If this occurs, please perform
the following procedures:
- Turn the steering wheel from lock to
lock while the engine is running.
- Drive the vehicle on a straight road
Backing up behind a projecting object for more than 5 minutes.
• When the steering wheel is turned with
The position 䊊 C is shown farther than the position
the ignition switch in the ACC position,
䊊B in the display. However, the position 䊊 C is
the predicted course lines may be dis-
actually at the same distance as the position 䊊 A. played incorrectly.
The vehicle may hit the object when backing up to
Display screen, heater, air conditioner, audio and phone systems 4-17
3. Slowly back up the vehicle adjusting the • Front view/bird’s-eye view split screen
steering wheel so that the predicted course • Front view/front-side view split screen
lines 䊊B enter the parking space 䊊 C .
The display will switch from the Around View®
4. Maneuver the steering wheel to make the Monitor screen when:
vehicle width guide lines 䊊 D parallel to the
parking space 䊊 C while referring to the pre- If the shift lever is in the D (Drive) position, the
dicted course lines. only available view is front view/front-side view
split screen.
5. When the vehicle is parked in the space com-
pletely, move the shift lever to the P (Park) • The shift lever is in the D (Drive) position and the
position and apply the parking brake. vehicle speed increases above approximately
6 mph (10 km/h).
HOW TO SWITCH THE DISPLAY • A different screen is selected.
With the ignition switch in the ON position, press
the CAMERA button or move the shift lever to the
R (Reverse) position to operate the Around
View® Monitor.
The Around View® Monitor displays different
split screen views depending on the position of
the shift lever. Press the CAMERA button to
switch between the available views.
If the shift lever is in the R (Reverse) position, the
1. Visually check that the parking space is safe available views are:
before parking your vehicle. • Rear view/bird’s-eye view split screen
2. The rear view of the vehicle is displayed on the • Rear view/front-side view split screen
screen 䊊 A when the shift lever is moved to the If the shift lever is in the P (Park) position, the
R (Reverse) position. available views are:
4-18 Display screen, heater, air conditioner, audio and phone systems
WARNING
Listed below are the system limitations
for Around View® Monitor. Failure to op-
erate the vehicle in accordance with
these system limitations could result in
serious injury or death.
• Do not use the Around View® Monitor
with the outside mirrors in the stored
position, and make sure that the trunk is
securely closed when operating the ve-
hicle using the Around View® Monitor.
• The apparent distance between objects
viewed on the Around View® Monitor
ADJUSTING THE SCREEN differs from the actual distance.
• The cameras are installed on the front
1. Touch the touch-screen display with the grille, the outside mirrors and above
Around View® Monitor on. the rear license plate. Do not put any-
2. Touch the “Brightness,” “Contrast,” “Tint,” thing on the vehicle that covers the
“Color,” or “Black Level” key. cameras.
• When washing the vehicle with high
3. Adjust the item by touching the + or — key on
pressure water, be sure not to spray it
the touch-screen display. around the cameras. Otherwise, water
Note AROUND VIEW® MONITOR may enter the camera unit causing wa-
SYSTEM LIMITATIONS ter condensation on the lens, a mal-
Do not adjust any of the display settings
function, fire or an electric shock.
of the Around View® Monitor while the • Do not strike the cameras. They are
vehicle is moving. Make sure the parking precision instruments. Doing so could
brake is firmly applied. cause a malfunction or cause damage
resulting in a fire or an electric shock.
Display screen, heater, air conditioner, audio and phone systems 4-19
There are some areas where the system will not • Do not use wax on the camera lens. Wipe off
show objects and the system does not warn of any wax with a clean cloth that has been damp-
moving objects. When in the front or rear view ened with a diluted mild cleaning agent, then
display, an object below the bumper or on the wipe with a dry cloth.
ground may not be viewed 䊊 1 . When in the
bird’s-eye view, a tall object near the seam 䊊
2 of
the camera viewing areas will not appear in the
monitor.
The following are operating limitations and do not
represent a system malfunction:
• There may be a delay when switching between
views.
• When the temperature is extremely high or low,
the screen may not display objects clearly. System temporarily unavailable
• When strong light directly shines on the cam- When the “!” icon is displayed on the screen,
era, objects may not be displayed clearly. there are abnormal conditions in the Around
• The screen may flicker under fluorescent light. View® Monitor. This will not hinder normal driving
operation but the system should be inspected by
• The colors of objects on the Around View®
a NISSAN certified LEAF dealer.
Monitor may differ somewhat from the actual
color of objects.
• Objects on the Around View® Monitor may not
be clear and the color of the object may differ in
a dark environment.
• There may be differences in sharpness between
each camera view of the bird’s-eye view.
4-20 Display screen, heater, air conditioner, audio and phone systems
VENTS
WARNING
• The air conditioning cooling function
operates only when the power switch
is in the ON position or when the
READY to drive indicator light is ON.
• Do not leave children or adults who
would normally require the assistance
of others alone in your vehicle. Pets
should also not be left alone. They
could accidentally injure themselves or
others through inadvertent operation
of the vehicle. Also, on hot, sunny days,
temperatures in a closed vehicle could
be quickly become high enough to
Driver side Passenger side causes severe or possibly fatal injuries
SIDE VENTS to people or animals.
Open/close the vents by moving the control to • Do not use the recirculation mode for
either direction. long periods as it may cause the inte-
rior air to become stale and the win-
: This symbol indicates that the vents are dows to fog up.
closed. Moving the side control to this direction
will close the vents.
: This symbol indicates that the vents are
open. Moving the side control to this direction will
open the vents.
Adjust the air flow direction of the vents by mov-
ing the knob (up/down, left/right) until the desired
position is achieved.
4-22 Display screen, heater, air conditioner, audio and phone systems
Note The climate control system (air conditioner and The fan, heater and air conditioning can be turned
• Odors from inside and outside the vehicle heater functions) can be operated when the on manually, using the timer function and using
can build up in the air conditioner unit. READY to drive indicator light is illuminated. the remote climate control function.
Odor can enter the passenger compart- However, while charging, the climate control sys- These functions operate in the following condi-
ment through the vents. tem can be used when the power switch is in the tions.
ON position.
• When parking, set the heater or air condi-
tioner controls to turn off air recirculation
to allow fresh air into the passenger com-
partment. This should help reduce odors
inside the vehicle.
Power switch position LOCK/OFF ACC ON READY to drive
Fan - - Available Available
Heater and air conditioner - - Available*1 Available
Timer (Climate Ctrl. Timer) Available*2 Available*2 - -
Remote control*3 Available Available - -
*1: The climate control system will only start when charging is being performed. After charging is complete, it will continue to operate if the EVSE (Electric Vehicle Supply Equipment)
is connected.
*2: The EVSE (Electric Vehicle Supply Equipment) must be connected.
*3: Models with navigation system.
screen. For additional information, refer to the formed: help maintain a constant temperature. Do not
separate Navigation Owner’s Manual. – The climate control system will stop put anything on or around these sensors.
once. If the power supply is restored • Using the AUTO mode will help reduce the
within approximately 5 minutes, the power consumption of the climate control.
climate control system will restart. • When the AUTO switched is pressed, the
However, if more than 5 minutes AUTO indicator illuminates. The (HEAT)
have elapsed, the climate control button indicator or the A/C button indicator
system will not restart. illuminates according to the operation of the
– If it occurs after charging has finished: climate control system.
– The climate control system will stop.
4-24 Display screen, heater, air conditioner, audio and phone systems
• The climate control timer or remote climate con-
trol (for models with Navigation) may fog up
windows depending on the set temperature (for
models with Navigation) or outside
temperature.
• When turning on the seat heater switch prior to
operating the climate control timer or the remote
climate control (for models with Navigation), the
seat heater will also turn on automatically when
the outside temperature is low.
Display screen, heater, air conditioner, audio and phone systems 4-27
Note Fan speed control: Outside air circulation:
• The ventilation mode requires a lower Press the fan speed control button to Press the intake air control button to
power consumption, so cruising distance manually control the fan speed. change the air circulation mode. When the indi-
will increase. cator light does not illuminate, the flowing air is
Press the AUTO button to change the fan speed
• In ventilation mode, temperature is not to the automatic mode. drawn from outside the vehicle.
indicated on the navigation monitor or on Automatic air intake control:
the air conditioner display. Air flow control:
Press the MODE button to change the air flow To set the automatic control mode, press and
Dehumidified defrosting/defogging: hold the intake air control button. The
mode.
Press the front defroster button (the indi- indicator light will blink twice and the inside/
— Air flows from the center and side
cator light will illuminate). ventilators. outside circulation will then be controlled auto-
• To remove moisture or fog on the front window matically. When in automatic mode, the indicator
— Air flows from the center and side
quickly, set the temperature to the high tem- light will come on when inside air recirculation is
ventilators and foot outlets.
perature and the fan speed to their maximum active.
— Air flows mainly from the foot outlets.
level. Note
— Air flows from the defroster outlets
• After the windshield is cleared, press the front and foot outlets. Rear window and outside mirror (if so
defroster button again (the indicator light
equipped) defroster switch:
will turn off). Temperature control:
For additional information, refer to “Rear window
• When the front defroster button is Turn the temperature control knob to set the and outside mirror (if so equipped) defroster
pressed, the air conditioner will automatically desired temperature. switch” in the “Instruments and controls” section
turn on to defog the windshield. The outside air
Air recirculation: of this manual
recirculation mode will be selected to improve
the defogging performance. Press the intake air control button to
change the air circulation mode. When the indi-
cator light illuminates, the flowing air is recircu-
lated inside the vehicle.
4-28 Display screen, heater, air conditioner, audio and phone systems
To turn the system off
To turn off the climate control, press the Climate WARNING
control system OFF button. The same operating Even if the Climate Ctrl. Timer is set, the
mode (Heater or A/C) that was active when the temperature in the passenger compart-
system is turned off is active when system is ment may become high or low if the sys-
turned back on. tem automatically stops. Do not leave
children or adults who would normally
Climate Ctrl. Timer require the support of others alone in
your vehicle. Pets should not be left
While the charger is connected to the vehicle,
alone either. On hot, sunny days, tem-
this function pre-heats or pre-cools the passen- peratures in a closed vehicle could
ger compartment of the vehicle to the tempera- quickly become high enough to cause
ture set by default before driving. This helps severe or possibly fatal injuries to people
reduce power consumption from the Li-ion bat- or animals. Also on cold days, tempera-
tery. ture in a vehicle could become low
enough to cause severe or possible fatal 1. Push the switch 䊊
A on the left side of
As the temperature is set to the factory default injuries to people or animals. the combination meter panel.
setting, the user cannot adjust the temperature.
2. Push the switch 䊊
B until “Climate Ctrl.
The Climate Ctrl. Timer operates the air condi- Timer” is highlighted on the vehicle informa-
tioner using power from the charger. Electric tion display and then push the switch
power from the Li-ion battery is not used. 䊊A.
Once the Climate Ctrl. Timer is set, it automati-
cally starts so the vehicle compartment will be
cooled/heated to the temperature set by default
by the registered departure time. It is therefore
not necessary to set the Climate Ctrl. Timer ev-
eryday.
Display screen, heater, air conditioner, audio and phone systems 4-29
3. The “Climate Ctrl. Timer” screen is displayed.
To change the time of day and the day of the
week that the climate control timer turns on or
off, or to turn the climate control timer on or
off, push the switch.
4-30 Display screen, heater, air conditioner, audio and phone systems
5. The hour portion of the time is highlighted on 6. Push the switch to change the minute 7. Push the switch to set the day to on or
the screen. Push the switch to change field in increments of ten minutes. Push and off. Push the switch and then set the
the hour field in increments of one hour. Push hold the switch to fast forward the next day with the same procedure. When all
and hold the switch to fast forward the minutes. Push the switch to move to the days of the week have been set, push the
hours. Push the switch to move to the day of the week setting. switch.
minutes field.
Display screen, heater, air conditioner, audio and phone systems 4-31
8. The settings confirmation screen will be dis-
played. To confirm and finish setting the cli-
mate control timer, push the switch.
4-32 Display screen, heater, air conditioner, audio and phone systems
10. MODE (manual air flow control) button
11. A/C (air conditioner) ON·OFF button
Automatic operation (AUTO)
The AUTO mode may be used year-round as the
system automatically controls constant tempera-
ture, air flow distribution and fan speed.
1. Press the AUTO button. The AUTO indicator
will be illuminated.
2. Turn the temperature control knob to set the
desired temperature.
When any of the following functions are oper-
ated, the AUTO indicator will turn off.
• The (HEAT) or A/C button is pressed.
• The fan speed control or ventilator air flow con-
trol is operated.
• The intake air control is switched.
However, the functions that were not operated
continue operating in AUTO mode.
Display screen, heater, air conditioner, audio and phone systems 4-35
Remote climate control – The cellular phone must be located in
WARNING an area with cellular phone coverage.
This vehicle incorporates a communication de-
– The computer must be connected to
vice that is called a TCU (Telematics Communi- • Radio waves could adversely affect
electric medical equipment. For addi- the internet.
cation Unit). The communication connection be-
tween this unit and Nissan Data Center allows for tional information, refer to your elec- • Some cellular phones are not compatible
various remote function services. tric medical equipment manufacturer with this system and cannot be used to
for the possible effect on pacemakers check the Li-ion battery charging status.
Even when away from the vehicle, climate control before using the remote climate con- Confirm this beforehand.
can be started by accessing the Nissan Data trol.
Center website using a cellular phone or a per- • Even if the remote climate control is Operating tips:
sonal computer. set, the temperature in the passenger • When the charge connector is connected, the
room may become high if the system climate control operates using electric power.
When operation is started, or at the set start time, automatically stops. Do not leave chil- When the charge connector is disconnected
the Nissan Data Center accesses the vehicle. dren or adults who would normally re- from the vehicle, the climate control operates
When the vehicle receives a command for re- quire the support of others alone in
using vehicle battery electric power.
mote operation, the climate control immediately your vehicle. Pets should not be left
turns ON and operates for the specified period of alone either. On hot, sunny days, tem- • The climate control can be operated for a maxi-
time. Confirmation of the ON/OFF of the climate peratures in a closed vehicle could mum of 2 hours when the charge connector is
control operation can be checked by accessing quickly become high enough to cause connected to the vehicle, or a maximum of 15
severe or possibly fatal injuries to minutes when the charge connector is
the website or by e-mail.
people or animals. disconnected.
Completing registration for the NissanCon-
• The remote climate control will only start to
nectSM Mobile Apps service is necessary before NOTE:
operate when the power switch is in the OFF
using the service. For additional information, refer • To check the Li-ion battery charging status position. Be sure to check that the power switch
to the separate Navigation Owner’s Manual. using an internet enabled smart phone or is in the OFF position.
personal computer.
• Remote climate control operation is not avail-
– The vehicle must be located in a cellu-
able when the vehicle is in an area of cellular
lar phone coverage area.
communication range.
4-36 Display screen, heater, air conditioner, audio and phone systems
• Communication becomes unavailable when the • If the quick charge connector is connected and
vehicle is not used for two weeks or more. charging is not performed, remote climate con-
When the power switch is placed in the ON trol operation starts using the battery electric
position, communication with the Nissan Data power of the vehicle.
Center can be restored.
• Air conditioning is limited to the capacity of the
electric power when the charge connector is
connected to the vehicle. Therefore, the tem-
perature may not reach a comfortable level due
to performance of the air conditioning being
limited, if the outside temperature is excessively
high or low, or if the charge connector is con-
nected to a 120-volt outlet.
• If the power switch is in the ON position or the Temperature settings
charge connector is disconnected, while the This procedure sets the temperature of Climate
remote climate control is being operated, re- Ctrl. timer and remote climate control.
mote climate control operation is automatically
stopped and an e-mail is sent. 1. Press the Zero Emission menu key. Touch
“Zero Emission Settings”.
• If remote climate control operation is started
while the vehicle is in normal charge mode, the 2. Touch “Timer/Remote – Set Climate Temp”.
climate control operates in climate control pri-
ority mode and charging is continued.
• If remote climate control operation is started
and charging is stopped while the vehicle is in
quick charge mode, climate control operation is
also stopped.
Display screen, heater, air conditioner, audio and phone systems 4-37
AUDIO SYSTEM (MODELS WITHOUT
NAVIGATION SYSTEM)
• The Climate Ctrl. Timer operates the cli- RADIO
mate control function so that a comfort-
Push the power switch to the ACC or ON posi-
able temperature is provided in the pas-
tion and press the radio band select button to
senger compartment at the scheduled
turn on the radio. If you listen to the radio while
time of departure. The climate control is
the READY to drive indicator light is off, the
set to stop at the scheduled time of depar-
power switch should be pushed to the ACC
ture.
position.
SERVICING CLIMATE CONTROL Radio reception is affected by station signal
The climate control system in your NISSAN is strength, distance from radio transmitter, build-
charged with a refrigerant designed with the en- ings, bridges, mountains and other external influ-
vironment in mind. This refrigerant will not harm ences. Intermittent changes in reception quality
the earth’s ozone layer. Special charging equip- normally are caused by these external influences.
3. Set the temperature and the touch “OK”. ment and lubricant are required when servicing Using a cellular phone in or near the vehicle
your NISSAN climate control. Using improper may influence radio reception quality.
Note refrigerants or lubricants will cause severe dam-
• The temperature in the passenger com- age to your climate control system. For additional Radio reception
partment may not be comfortable if enter- information, refer to “Recommended fluids/ Your NISSAN radio system is equipped with
ing the vehicle too soon before or too long lubricants and capacities” in the “Technical and state-of-the-art electronic circuits to enhance ra-
after the scheduled time of departure. consumer information” section. dio reception. These circuits are designed to
• Air conditioning is limited to the capacity extend reception range, and to enhance the qual-
A NISSAN certified LEAF dealer will be able to
of the electric power when the charge ity of that reception.
connector is connected. Therefore, the service your environmentally friendly climate con-
temperature may not reach the set tem- trol system. However, there are some general characteristics
perature due to limitations in air condi- of both FM and AM radio signals that can affect
tioning performance, if ambient tempera- radio reception quality in a moving vehicle, even
ture is excessively high or low, or if the
charge connector is connected to a 120-
volt plug outlet.
4-38 Display screen, heater, air conditioner, audio and phone systems
when the finest equipment is used. These char- Static and flutter: During signal interference from
acteristics are completely normal in a given re- buildings, large hills or due to antenna position
ception area and do not indicate any malfunction (usually in conjunction with increased distance
in your NISSAN radio system. from the station transmitter), static or flutter can
Reception conditions will constantly change be- be heard. This can be reduced by adjusting the
cause of vehicle movement. Buildings, terrain, treble control to reduce treble response.
signal distance and interference from other ve- Multipath reception: Because of the reflective
hicles can work against ideal reception. De- characteristics of FM signals, direct and reflected
scribed below are some of the factors that can signals reach the receiver at the same time. The
affect your radio reception. signals may cancel each other, resulting in mo-
Some cellular phones or other devices may mentary flutter or loss of sound.
cause interference or a buzzing noise to come AM RADIO RECEPTION
from the audio system speakers. Storing the de-
vice in a different location may reduce or elimi- FM RADIO RECEPTION AM signals, because of their low frequency, can
nate the noise. Range: FM range is normally limited to 25 – 30 mi bend around objects and skip along the ground.
(40 – 48 km), with monaural (single channel) FM In addition, the signals can be bounced off the
having slightly more range than stereo FM. External ionosphere and bent back to earth. Because of
influences may sometimes interfere with FM station these characteristics, AM signals are also sub-
reception even if the FM station is within 25 mi ject to interference as they travel from transmitter
(40 km). The strength of the FM signal is directly to receiver.
related to the distance between the transmitter and Fading: Occurs while the vehicle is passing
receiver. FM signals follow a line-of-sight path, through freeway underpasses or in areas with
exhibiting many of the same characteristics as light. many tall buildings. It can also occur for several
For example, they will reflect off objects. seconds during ionospheric turbulence even in
Fade and drift: As your vehicle moves away from areas where no obstacles exist.
a station transmitter, the signals will tend to fade Static: Caused by thunderstorms, electrical
and/or drift. power lines, electric signs and even traffic lights.
Display screen, heater, air conditioner, audio and phone systems 4-39
SATELLITE RADIO RECEPTION
CAUTION
When the satellite radio is used for the first time
or the battery has been replaced, the satellite • Do not force a compact disc into the
radio may not work properly. This is not a mal- CD insert slot. This could damage the
CD and/or CD player.
function. Wait more than 10 minutes with satellite
• Trying to load a CD with the CD door
radio ON and the vehicle outside of any metal or closed could damage the CD and/or
large building for satellite radio to receive all of CD player.
the necessary data. • Only one CD can be loaded into the CD
No satellite radio reception is available and “NO player at a time.
SAT” is displayed when the SAT band option is • Only use high quality 4.7 in (12 cm) round
selected unless optional satellite receiver and discs that have the “COMPACT disc DIGI-
antenna are installed and a SiriusXM® Satellite TAL AUDIO” logo on the disc or packaging.
Radio service subscription is active. Satellite ra- • During cold weather or rainy days, the
dio is not available in Alaska, Hawaii and Guam. player may malfunction due to the humid-
Satellite radio performance may be affected if ity. If this occurs, remove the CD and de-
cargo carried on the roof blocks the satellite radio humidify or ventilate the player
signal. completely.
• The player may skip while driving on
If possible, do not put cargo over the satellite
rough roads.
antenna.
• The CD player sometimes cannot function
A build up of ice on the satellite radio antenna can AUDIO OPERATION PRECAUTIONS when the compartment temperature is ex-
affect satellite radio performance. Remove the tremely high or low. Decrease/increase
ice to restore satellite radio reception. Compact disc (CD) player
the temperature before use.
• Do not expose the CD to direct sunlight.
4-40 Display screen, heater, air conditioner, audio and phone systems
• CDs that are in poor condition or are dirty, PRESS EJECT: offers greater file compression than the MP3
scratched or covered with fingerprints This is an error due to excessive tempera- codec, enabling storage of more digital audio
may not work properly. ture inside the player. Remove the CD by tracks in the same amount of space when com-
• The following CDs may not work properly. pressing the EJECT button. After a short pared to MP3s at the same level of quality.
– Copy control compact discs (CCCD) time, reinsert the CD. The CD can be played • Bit rate — Bit rate denotes the number of bits
– Recordable compact discs (CD-R) when the temperature of the player returns per second used by a digital music file. The size
– Rewritable compact discs (CD-RW) to normal. and quality of a compressed digital audio file is
• Do not use the following CDs as they may determined by the bit rate used when encoding
UNPLAYABLE:
cause the CD player to malfunction: the file.
– 3.1 in (8 cm) discs with an adapter The file is unplayable in this audio system • Sampling frequency — Sampling frequency is
– CDs that are not round (only MP3 orWMA(if so equipped) CD). the rate at which the samples of a signal are
– CDs with a paper label Compressed audio files (MP3/WMA) converted from analog to digital (A/D conver-
– CDs that are warped, scratched, or sion) per second.
have abnormal edges Terms
• Multisession — Multisession is one of the meth-
• This audio system can only play prere- • MP3 — MP3 is short for Moving Pictures Ex- ods for writing data to media. Writing data once
corded CDs. It has no capability to record perts Group Audio Layer 3. MP3 is the most to the media is called a single session, and
or burn CDs. well-known compressed digital audio file for- writing more than once is called a multisession.
mat. This format allows for near “CD quality”
• If the CD cannot be played, one of the • ID3/WMA Tag — The ID3/WMA tag is the part
sound, but at a fraction of the size of normal
following messages will be displayed. of the encoded MP3 or WMA file that contains
audio files. MP3 conversion of an audio track
CHECK DISC: information about the digital music file such as
from CD-ROM can reduce the file size by ap-
song title, artist, encoding bit rate, track time
• Confirm that the CD is inserted correctly proximately a 10:1 ratio with virtually no percep-
duration, etc. ID3 tag information is displayed
(the label side is facing up, etc.). tible loss in quality. MP3 compression removes
on the Artist/song title line on the display.
• Confirm that the CD is not bent or warped the redundant and irrelevant parts of a sound
and it is free of scratches. signal that the human ear doesn’t hear. * Windows® and Windows Media® are regis-
• WMA — Windows Media Audio (WMA)* is a tered trademarks and trademarks in the United
compressed audio format created by Microsoft States of America and other countries of Micro-
as an alternative to MP3. The WMA codec soft Corporation of the USA.
Display screen, heater, air conditioner, audio and phone systems 4-41
• If there is a file in the top level of the disc, “Root
Folder” is displayed.
• The playback order is the order in which the files
were written by the writing software. Therefore,
the files might not play in the desired order.
Display screen, heater, air conditioner, audio and phone systems 4-43
Troubleshooting guide
Symptom Cause and Countermeasure
Check if the disc was inserted correctly.
Check if the disc is scratched or dirty.
Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the
player.
If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.
Cannot play If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will
be played.
Files with extensions other than “.MP3”,“.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and
number of characters for folder names and file names should be in compliance with the specifications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the disc is protected by copyright.
Check if the disc is scratched or dirty.
Poor sound quality
Bit rate may be too low.
It takes a relatively long time before the music starts If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before
playing. the music starts playing.
Music cuts off or skips The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might
not match the specifications. Try using the slowest writing speed.
Skipping with high bit rate files Skipping may occur with large quantities of data, such as for high bit rate data.
Moves immediately to the next song when playing When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, .“mp3”or “.wma”, or when play is prohibited by
copyright protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song.
Songs do not play back in the desired order The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the
desired order.
4-44 Display screen, heater, air conditioner, audio and phone systems
USB (Universal Serial Bus) connection The vehicle is not equipped with a USB device. • Improperly plugging in the iPod® may cause a
port USB devices should be purchased separately as checkmark to be displayed on and off (flicker-
necessary. This system cannot be used to format ing). Always make sure that the iPod® is con-
USB devices. To format a USB device, use a nected properly.
WARNING personal computer. In some states/area, the USB • An iPod® nano (1st Generation) may remain in
Do not connect, disconnect or operate device for the front seats plays only sound with- fast forward or rewind mode if it is connected
the USB device while driving. Doing so out images for regulatory reasons, even when the during a seek operation. In this case, please
can be a distraction. If distracted you vehicle is parked. manually reset the iPod®.
could lose control of your vehicle and This system supports various USB memory de- • An iPod® nano (2nd Generation) will continue
cause an accident or serious injury.
vices, USB hard drives and iPod® players. Some to fast-forward or rewind if it is disconnected
USB devices may not be supported by this sys- during a seek operation.
CAUTION tem. • An incorrect song title may appear when the
Partitioned USB devices may not play correctly. Play Mode is changed while using an iPod®
• Do not force the USB device into the
USB port. Inserting the USB device nano (2nd Generation).
Some characters used in other languages (Chi-
tilted or up-side-down into the port nese, Japanese, etc.) may not appear properly in • Audiobooks may not play in the same order as
may damage the port. Make sure that the display. Using English language characters they appear on an iPod®.
the USB device is connected correctly • Large video files cause slow responses in an
with a USB device is recommended.
into the USB port. iPod®. The vehicle center display may momen-
• Do not grab the USB port cover (if so General notes for USB use:
tarily black out, but will soon recover.
equipped) when pulling the USB de-
vice out of the port. This could damage Refer to your device manufacturer’s owner infor- • If an iPod® automatically selects large video
the port and the cover. mation regarding the proper use and care of the files while in the shuffle mode, the vehicle center
• Do not leave the USB cable in a place device. display may momentarily black out, but will soon
where it can be pulled unintentionally. Notes for iPod® use: recover.
Pulling the cable may damage the port.
iPod® is a trademark of Apple Inc., registered in
the U.S. and other countries.
Display screen, heater, air conditioner, audio and phone systems 4-45
Bluetooth® streaming audio • This system supports the Bluetooth® Audio
• Some Bluetooth® audio devices may not be Distribution Profile (A2DP, AVRCP).
recognized by the in-vehicle audio system. BLUETOOTH® is a trademark
• It is necessary to set up the wireless connection owned by Bluetooth SIG, Inc. and licensed to
between a compatible Bluetooth® audio device Visteon.
and the in-vehicle Bluetooth® module before
using the Bluetooth® audio.
• Operating procedure of the Bluetooth® audio
will vary depending on the devices. Make sure
how to operate your audio device before using it
with this system.
• The Bluetooth® audio may be stopped under
the following conditions:
– Receiving a call on the Hands-Free Phone
System.
– Checking the connection to the hands-free
phone.
• Do not place the Bluetooth® audio device in an
area surrounded by metal or far away from the
in-vehicle Bluetooth® module to prevent tone
quality degradation and wireless connection
disruption.
• While an audio device is connected through the
Bluetooth® wireless connection, the battery
power of the device may discharge quicker than
usual.
4-46 Display screen, heater, air conditioner, audio and phone systems
14. XM button
15. FM·AM button
For additional information, refer to “Audio opera-
tion precautions” in this section.
• No satellite radio reception is available when the
SAT band option is selected unless a SiriusXM®
Satellite Radio subscription is active.
• The satellite radio is not available in Alaska,
Hawaii and Guam.
Audio main operation
(Power)/VOL (Volume) control knob
Place the power switch in the ACC or ON posi-
tion, and then press the button while the
system is off to turn on the last audio source,
which was playing immediately before the system
was turned off. While the system is on, pressing
the button turns the system off.
Turn the VOL control knob to adjust the volume.
This vehicle may be equipped with speed sensi-
tive volume. When this feature is active, the audio
FM-AM-SAT RADIO WITH 7. Apps button
volume changes as the driving speed changes.
COMPACT DISC (CD) PLAYER 8. BACK button
1. CD EJECT button 9. TUNE/SCROLL knob /ENTER/SETTING button ENTER/SETTING button
2. RPT (repeat) button 10. Station select (1–6) buttons When the audio screen is displayed, press the
3. RDM (random) button 11. (power) button /VOL (volume) con- ENTER/SETTING button to show the Settings
4. Display screen trol knob screen on the display. Turn the TUNE/SCROLL
5. SCAN button 12. DISP button knob to navigate the options and then press the
6. SEEK button CAT button 13. MEDIA button ENTER/SETTING button to make a selection.
Display screen, heater, air conditioner, audio and phone systems 4-47
Audio
Bass Adjusts the bass to the desired level.
Treble Adjusts the treble to the desired level.
Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers.
Fade Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers.
Speed Sens Vol. (Speed Sensitive Adjusts the speed sensitive volume function, which increases the volume of the audio system as the speed of
Volume) the vehicle increases. Set to “OFF” to disable the feature. The higher the setting, the more the volume in-
creases in relation to vehicle speed.
AUX Vol. Choose a setting from 0 to +3 to control the boost of incoming auxiliary device volume. A setting of 0 pro-
vides no additional boost in volume. A setting of +3 provides the greatest boost in volume.
Brightness Adjust the brightness to adjust the appearance of the display screen.
Contrast Adjust the contrast to adjust the appearance of the display screen.
Clock Adjust Allows the user to set time manually. To set the clock:
1. Press the ENTER button.
2. Turn the TUNE knob to select CLOCK.
3. Press the ENTER button.
4. Turn the TUNE knob to select “set time”.
5. Press the ENTER button.
6. Rotate the TUNE knob to adjust hours.
7. Press the ENTER button.
8. Turn the TUNE knob to adjust minutes.
9. Press the ENTER button.
10. Press the BACK button to finish.
On-Screen Clock Toggles ON or OFF the clock display on the upper right corner of the display screen.
RDS Display Toggles ON or OFF the RDS information displayed on the screen while the radio is playing.
Language Select Select the desired language for the system from the available options.
4-48 Display screen, heater, air conditioner, audio and phone systems
Bass, treble, balance and fade can also be ad- APPS button Satellite radio is not available in Alaska, Hawaii
justed by pressing the ENTER/SETTING button Press the APPS button to launch the Smart- and Guam.
and turning the TUNE/SCROLL control knob to phone Integration Mode. For additional informa- If a compact disc is playing when the XM button
select the item to adjust. When the desired item tion, refer to “NissanConnectSM Mobile Apps” in is pressed, the compact disc will automatically be
is shown on the display, turn the tuning to adjust this section. turned off and the last radio station played will
and then press the ENTER/SETTING button until come on.
the display returns to the main audio screen. If the FM-AM-SAT radio operation
button is not pressed for approximately 10 sec- TUNE/SCROLL knob (Tuning)
FM●AM band select
onds, the radio or CD display will automatically Turn the TUNE/SCROLL knob to the left or right
reappear. Pressing the radio band select button will change
for manual tuning.
the band as follows:
DISP button SEEK tuning
AM→FM1→FM2→AM
Display of the screen can be canceled by press- Press the SEEK/CAT or button or to
ing the DISP button. You can then listen to music XM band select
tune from low to high or high to low frequencies
that is being played back. If you want to display Pressing the XM band select button will change and to stop at the next broadcasting station.
the screen again, either press the DISP button the band as follows:
SCAN tuning
once more or press the FM·AM, XM Satellite XM1→XM2→XM3→XM1
Radio or CD·AUX button. Press the SCAN button to stop at each broad-
When the XM band select button is pressed casting station for 5 seconds. SCAN will appear
MEDIA button while the power switch is in the ACC or ON on the screen while the radio is scan tuning.
Pressing the MEDIA button will switch the dis- position, the radio will come on at the channel last
Pressing the button again during this 5 second
plays as follows: played.
period will stop SCAN tuning and the radio will
iPod®/USB→Bluetooth The last station played will also come on when remain tuned to that station. If the SCAN button is
Audio→AUX→CD→iPod®/USB the button is pressed to radio ON. not pressed within 5 seconds, SCAN tuning
BACK button *When the XM button is pressed, the satellite moves to the next station.
When the BACK button is pressed, it returns to radio mode will be skipped unless a SiriusXM®
the previous display. Satellite Radio service subscription is active.
Display screen, heater, air conditioner, audio and phone systems 4-49
1 to 6 Station memory operations Compact disc (CD) player operation Repeat (RPT)
Six stations can be set for the AM band. Twelve Place the power switch in the ACC or ON posi- When the RPT play button is pressed while the
stations can be set for the FM band (6 for FM1, 6 tion and insert the Compact Disc (CD) into the CD is played, the play pattern can be changed as
for FM2). Eighteen channels can be set for the slot with the label side facing up. The CD will be follows:
satellite radio (6 for XM1, 6 for XM2, 6 for XM3). guided automatically into the slot and start play- (CD)
1. Choose the radio band AM, FM1 or FM2 ing.
Normal↔1 Track Repeat
using the FM·AM select button, or choose the After loading the CD, the number of tracks on the
satellite band XM1, XM2 or XM3 using the CD and the play time will appear on the display. (CD with compressed audio files)
XM button. Normal→1 Folder Repeat→1 Track Repeat-
If the radio is already operating, it will automati-
2. Tune to the desired station using manual, cally turn off and the CD will play. →Normal
SEEK or SCAN tuning. Press and hold any of Random (RDM)
the desired station memory buttons (1 – 6) If the system has been turned off while the CD
until the preset number is updated on the was playing, pressing the PWR button will start When the RDM play button is pressed while a
display and the sound is briefly muted. the CD. CD is being played, the play pattern can be
Do not use 3.1 in (8 cm) discs. changed as follows:
3. The channel indicator will then come on and
the sound will resume. Programming is now SEEK/CAT buttons (CD)
complete. Normal↔1 Disc Random
When the FF or REW button is pressed for more
4. Other buttons can be set in the same manner.
than 1.5 seconds while the CD is being played, (CD with compressed audio files)
If the battery cable is disconnected, or if the fuse the CD will play while fast forwarding or rewind-
Normal→1 Disc Random→1 Folder Random-
opens, the radio memory will be canceled. In that ing. When the button is released, the CD will
→Normal
case, reset the desired stations. return to normal play speed.
CD EJECT
When the FF or REW button is pressed for less
than 1.5 seconds while the CD is being played, When the CD EJECT button is pressed with a
the next track or the beginning of the current track compact disc loaded, the CD will be ejected.
on the CD will be played. When this button is pressed while the CD is
being played, the CD will be ejected.
4-50 Display screen, heater, air conditioner, audio and phone systems
If the CD comes out and is not removed, it The track number and total number of tracks in
will be pulled back into the slot to protect it. the current folder or on the current disc are
AUX IN jack displayed on the screen as well.
The AUX IN jack is located under the control TUNE/SCROLL knob (MP#/WMA CD only)
panel. The AUX IN audio jack accepts any stan- If a MP3/WMA CD with multiple folders is play-
dard analog audio input such as from a portable ing, turn the TUNE/SCROLL knob to change
cassette tape/CD player, MP3 player or laptop folders. Turn the knob to the left to skip back a
computer. folder. Turn the knob to the right to skip ahead a
MEDIA folder.
Display screen, heater, air conditioner, audio and phone systems 4-51
SEEK/CAT buttons RANDOM (RDM)
WARNING When the or button is pressed for When the RDM button is pressed while a USB
Do not connect, disconnect or operate more than 1.5 seconds while a USB memory is memory device is being playing, the play pattern
the USB device while driving. Doing so being played, the USB memory will play while fast can be changed as follows:
can be a distraction. If distracted you forwarding or rewinding. When the button is re-
could lose control of your vehicle and To change the play mode, press the RDM button
leased, the USB memory will return to normal repeatedly and the mode will change as follows:
cause an accident or serious injury. play speed.
Normal→All Random→1 Folder Random→Nor-
When the or button is pressed for less mal
CAUTION than 1.5 seconds while the USB memory is being
played, the next track or the beginning of the TUNE/SCROLL knob
• Do not force the USB device into the
USB port. Inserting the USB device current track on the USB memory will be played. If there are multiple folders with audio files on the
tilted or up-side-down into the port The multi-function controller can also be used to USB device, turn the TUNE/SCROLL knob to
may damage the port. Make sure that select tracks when the USB memory is being change folders. Turn the knob to the left to skip
the USB device is connected correctly played. back a folder. Turn the knob to the right to skip
into the USB port. ahead a folder. If there is only one folder of audio
• Do not grab the USB port cover (if so Folder selection files on the USB device, turning the TUNE/
equipped) when pulling the USB de-
To change to another folder in the USB memory, SCROLL knob in either direction will return to the
vice out of the port. This could damage
the port and the cover. turn the folder selector. first track on the USB device.
• Do not leave the USB cable in a place REPEAT (RPT) BACK button
where it can be pulled unintentionally.
Pulling the cable my damage the port. When the RPT button is pressed while the USB When the BACK button is pressed, it
Audio file Operation memory is being played, the play pattern can be returns to the previous display.
changed as follows:
MEDIA button
To change the play mode, press the RPT button
When the MEDIA button is pressed with the repeatedly and the mode will change as follows:
system off and the USB memory inserted, the
system will turn on. Normal→1 Folder Repeat→1 Track Repeat-
→Normal
4-52 Display screen, heater, air conditioner, audio and phone systems
vehicle, the iPod® music library can only be Compatibility
operated by the vehicle audio controls.
The following models are available:
* iPod® and the iPhone® are a trademark of • Third generation iPhone® (Firmware version
Apple Inc., registered in the U.S. and other coun- IOS4/4.0)
tries.
• Fourth generation iPhone® (Firmware version
IOS4/4.0)
WARNING
• Fifth generation iPhone® (firmware version
Do not connect, disconnect or operate
IOS6/6.0)
the USB device while driving. Doing so
can be a distraction. If distracted you • Fifth generation iPod® (Firmware version 1.3)
could lose control of your vehicle and • First generation iPod Classic® (Firmware ver-
cause an accident or serious injury. sion 1.1.1 or 2.0.1)
• Second generation iPod Classic® (Firmware
IPOD® PLAYER OPERATION version 2.0.1)
CAUTION
(MODELS WITHOUT NAVIGATION • First generation iPod touch® (Firmware version
SYSTEM) • Do not force the USB device into the
1.1 or 2.2.1)
USB port. Inserting the USB device
Connecting iPod® tilted or up-side-down into the port • Second generation iPod touch® (Firmware ver-
may damage the port. Make sure that sion IOS 2.1.1 or 2.2.1)
The USB outlet connector is located in the center
the USB device is connected correctly • Third generation iPod touch® (Firmware ver-
console. Open the lid and connect the iPod®
into the USB port. sion IOS 3.1 or 3.1.3)
cable to the USB connection port. The battery of • Do not grab the USB port cover (if so
the iPod® is charged while the connection to the equipped) when pulling the USB de- • Fourth generation iPod touch® (Firmware ver-
vehicle. vice out of the port. This could damage sion IOS 4.1 or 6.1.3)
Depending on the version of the iPod®, the dis- the port and the cover. • Fifth generation iPod touch® (Firmware version
• Do not leave the USB cable in a place IOS 6.0.0 or 6.1.3)
play on the iPod® shows a NISSAN or Acces-
where it can be pulled unintentionally.
sory Attached screen when the connection is • First generation iPod nano® (Firmware version
Pulling the cable my damage the port.
completed. When the iPod® is connected to the 1.3.1)
Display screen, heater, air conditioner, audio and phone systems 4-53
• Second generation iPod nano® (Firmware ver- MEDIA button • Composers
sion 1.1.3) Place the power switch in the ACC or ON posi- • Audiobooks
• Third generation iPod nano® (Firmware version tion. Then, press the MEDIA button to switch to • Shuffle Songs
1.0.0 or 1.1.3) the iPod® mode. For additional information, refer to the iPod®
• Fourth generation iPod nano® (Firmware ver- If another audio source is playing and the iPod® Owner’s Manual.
sion 1.0.2 or 1.0.4) is connected, pressing the MEDIA button SEEK/CAT buttons
• Fifth generation iPod nano® (Firmware version changes to the iPod® mode.
1.0.1 or 1.0.2) When the or button is pressed for
If the system has been turned off while the iPod® more than 1.5 seconds while the iPod® is play-
• Sixth generation iPod nano® (Firmware version was playing, pressing the (power) button
1.0 or 1.2) ing, the iPod® will play while fast forwarding or
will start the iPod®. rewinding. When the button is released , the
• Seventh generation iPod nano® (Firmware ver-
When the MEDIA button is pressed while the iPod® will return to the normal play speed.
sion 1.0.0 or 1.0.1)
iPod® is connected, the interface for iPod® op- When the or button is pressed for
The iPod touch® may not respond quickly with eration is shown on the audio display. The items less than 1.5 seconds while the iPod® is playing,
the system in some cases. on the menu list can be scrolled by turning the the next track or the beginning of the current track
Make sure that the iPod® firmware is updated. TUNE/SCROLL dial while the iPod® is opera- on the iPod® will be played.
tional. To select an item, press ENTER/SETTING.
Audio main operation Items in the iPod® menu appear on the display in REPEAT (RPT)
Place the power switch in the ACC or ON posi- the following order: When the RPT play button is pressed while a
tion. Then, press the MEDIA button repeatedly to • Now Playing track is being played, the play pattern can be
switch to the iPod® mode. • Playlists changed as follows:
If the system has been turned off while the iPod® • Artists Repeat Off→1 Track Repeat→All Repeat→Re-
was playing, pressing the (power) button • Albums peat Off
will start the iPod®.
• Songs
• Podcasts
• Genres
4-54 Display screen, heater, air conditioner, audio and phone systems
RANDOM (RDM) Connecting Bluetooth® audio AUX DEVICE PLAYER OPERATION
When the RDM play button is pressed while a To connect your Bluetooth® audio device to the The AUX input jack is located on the lower part of
track is being played, the play pattern can be vehicle, follow the procedure below: the instrument panel. The AUX input jack accepts
changed as follows: any standard analog audio input such as from a
1. Press the ENTER/SETTING button.
Shuffle Off→Track Shuffle→Album Shuffle- portable cassette tape/CD player, MP3 player or
2. Select “Bluetooth”.
→Shuffle Off laptop computer.
3. Select “Add Phone”. This same screen can be
BACK button accessed to remove, replace or select a dif- NISSAN strongly recommends using a stereo
ferent Bluetooth® device. mini plug when connecting your music device to
When the BACK button is pressed, it the audio system. Music may not play properly
returns to the previous display. 4. The system acknowledges the command and
when monaural cable is used.
asks you to initiate connecting from the phone
BLUETOOTH® STREAMING AUDIO handset. The connecting procedure of the To switch the AUX mode, press the MEDIA but-
(MODELS WITHOUT NAVIGATION cellular phone varies according to each cellu- ton until the AUX mode is selected, while the
SYSTEM) lar phone model. For additional information, power switch is in the “ON” or “ACC” position.
If you have a compatible Bluetooth® audio de- refer to the cellular phone’s Owner’s Manual.
vice that is capable of playing audio files, the You can also visit
device can be connected to the vehicle’s audio www.NissanUSA.com/bluetooth for instruc-
system so that the audio files on the device play tions on connecting NISSAN-recommended
through the vehicle’s speakers. For additional cellular phones.
information, refer to “FM-AM-SAT radio with Audio main operation:
compact disc (CD) player” in this section. To switch to the Bluetooth® audio mode, press
Note the MEDIA button repeatedly until the
For additional information regarding Bluetooth® audio mode is displayed on the
Bluetooth® Streaming Audio, refer to screen. Use the vehicle audio controls or the
the Cellular Phone Owner’s Manual. Bluetooth® device’s controls to play, pause, skip
or reverse tracks.
Display screen, heater, air conditioner, audio and phone systems 4-55
* These modes are only available when compat-
ible media storage is inserted into the device or
connected to the system.
Volume control switch
Push the volume control switch to increase or
decrease the volume.
Tuning switch
While the display is showing an audio screen, tilt
the tuning switch upward or downward to select
a station, track, CD or folder. For most audio
sources, tilting the switch up/down for more than
1.5 seconds provides a different function than a
CD CARE AND CLEANING STEERING WHEEL SWITCH FOR tilting up/down for less than 1.5 seconds.
• Handle a CD by its edges. Do not bend the disc. AUDIO CONTROL
AM and FM:
Never touch the surface of the disc. The audio system can be operated using the
• Tilt up/down for less than 1.5 seconds to in-
• Always place the discs in the storage case controls on the steering wheel.
crease or decrease the preset station.
when they are not being used.
1. SOURCE button/tuning switch • Tilt up/down for more than 1.5 seconds to seek
• To clean a disc, wipe the surface from the center 2. Volume control button up or down to the next station.
to the outer edge using a clean, soft cloth. Do
not wipe the disc using a circular motion. SOURCE select switch XM:
• Do not use a conventional record cleaner or Push the source select switch to change the • Tilt up/down for less than 1.5 seconds to in-
alcohol intended for industrial use. mode in the following sequence: crease or decrease the preset station.
• A new disc may be rough on the inner and outer AM→FM1→FM2→XM1→XM2→XM3→CD*→ • Tilt up/down for more than 1.5 seconds to go to
edges. Remove the rough edges by rubbing the USB/iPod®*→Bluetooth® Audio→ AUX*→AM. the next or previous category.
inner and outer edges with the side of a pen or
pencil as illustrated.
4-56 Display screen, heater, air conditioner, audio and phone systems
iPod®:
• Tilt up/down for less than 1.5 seconds to in- CAUTION
crease or decrease the track number. • To avoid damaging or deforming the
antenna, be sure to remove the an-
CD:
tenna under the following conditions.
• Tilt up/down for less than 1.5 seconds to in- – The vehicle enters an automatic car
crease or decrease the track number. wash.
• Tilt up/down for more than 1.5 seconds to in- – The vehicle enters a garage with a
crease or decrease the folder number (if playing low ceiling.
compressed audio files). – The vehicle is covered with a car
cover.
USB: • Always properly tighten the antenna
• Tilt up/down for less than 1.5 seconds to in- rod during installation. Otherwise, the
crease or decrease the track number. antenna rod may break during vehicle
ANTENNA operation.
• Tilt up/down for more than 1.5 seconds to in-
crease or decrease the folder number. Removing antenna NISSANCONNECTsm MOBILE APPS
The antenna cannot be shortened, but can be (MODELS WITHOUT NAVIGATION
removed. When you need to remove the antenna, SYSTEM)
turn the antenna rod counterclockwise 䊊
B.
This vehicle is equipped with Smartphone Integra-
To install the antenna rod, turn the antenna rod tion technology. This allows many compatible
clockwise 䊊 A and hand tighten. Smartphone applications to be displayed and eas-
ily controlled through the vehicle’s display screen.
Note
A compatible smartphone and registra-
tion is required to use mobile applica-
tions or to access connected features of
certain vehicle applications.
Display screen, heater, air conditioner, audio and phone systems 4-57
Registering with NissanConnectsm Application download
Mobile Apps Once connected, the NissanConnect Mobile WARNING
To use the Smartphone Integration feature, it is App will search your phone to determine which • A cellular phone should not be used
compatible applications are currently installed. for any purpose while driving so full
necessary for the user to register. In order to
The user will then choose which apps they want attention may be given to vehicle op-
register, visit the NissanConnectsm Mobile Apps eration. Some jurisdictions prohibit
website, www.nissanusa.com/connect/ or to bring into their vehicle from the list of apps
the use of cellular phones while driv-
https://canada.nissanconnect.com and sign up within the “Manage My Apps” section of the
ing.
or create an account through the prompts on the NissanConnect Mobile App on their smartphone. • If you must make a call while your
NissanConnect Mobile Apps. Once registered, The vehicle will then download the in-vehicle vehicle is in motion, the hands free
download the NissanConnect Mobile Apps from interface for each of these compatible cellular phone operational mode is
your compatible phone’s application download applications. Once downloaded, the user can highly recommended. Exercise ex-
source and then log into the application. If you access their selected smartphone applications treme caution at all times so full atten-
already have an account created through the through the vehicle display. For additional tion may be given to vehicle operation.
information on application availability visit • If you are unable to devote full atten-
App, please log in.
www.nissanusa.com/connect/ or tion to vehicle operation while talking
Connect phone www.ca/nissanconnect or on the phone, pull off the road to a safe
location and stop your vehicle.
To use this feature, a compatible smartphone www.nissan.ca/nissanconnect/fr.
must be connected via Bluetooth® to the vehicle.
For additional information, refer to “Bluetooth®
CAR PHONE OR CB RADIO
Hands-Free Phone System without Navigation When installing a CB, ham radio or car phone in
System” in this section. your vehicle, be sure to observe the following
precautions; otherwise, the new equipment may
Note adversely affect the engine control system and
Apple iPhones® and Android phones other electronic parts.
must be paired via Bluetooth® for Nis-
sanConnect Mobile Apps to function.
4-58 Display screen, heater, air conditioner, audio and phone systems
BLUETOOTH® HANDS-FREE PHONE
SYSTEM WITHOUT NAVIGATION
SYSTEM (IF SO EQUIPPED)
CAUTION WARNING
• Keep the antenna as far away as pos- • Use a phone after stopping your ve-
sible from the electronic control mod- hicle in a safe location. If you have to
ules. use a phone while driving, exercise ex-
• Keep the antenna wire more than 8 in treme caution at all times so full atten-
(20 cm) away from the electronic con- tion may be given to vehicle operation.
trol system harnesses. Do not route • If you are unable to devote full atten-
the antenna wire next to any harness. tion to vehicle operation while talking
• Adjust the antenna standing-wave ra- on the phone, pull off the road to a safe
tio as recommended by the manufac- location and stop your vehicle.
turer.
• Connect the ground wire from the CB
radio chassis to the body. CAUTION
• For details, consult a NISSAN certified
LEAF dealer. To avoid draining the vehicle battery, use
a phone after the READY to drive indica-
tor light is on.
Display screen, heater, air conditioner, audio and phone systems 4-59
phone module when the power switch is placed
in the ON position with the previously connected
cellular phone turned on and carried in the ve-
hicle.
NOTE:
Some devices require the user to accept
specific connections for certain features
(such as phonebook download). If your
phone does not connect automatically to
the system, consult the phone’s Owner’s
Manual for details on device operation.
You can connect up to 5 different Bluetooth®
cellular phones to the in-vehicle phone module.
However, you can talk on only one cellular phone
at a time.
Before using the Bluetooth® Hands-Free Phone
System, refer to the following notes:
• Set up the wireless connection between a com-
patible cellular phone and the in-vehicle phone
module before using the hands-free phone
Your NISSAN is equipped with the Bluetooth® make or receive a hands-free telephone call with system.
Hands-Free Phone System. If you have a com- your cellular phone in the vehicle.
• Some Bluetooth® enabled cellular phones
patible Bluetooth® enabled cellular phone, you Once your cellular phone is connected to the may not be recognized or work properly. Please
can set up the wireless connection between your in-vehicle phone module, no other phone con- visit www.nissanusa.com/bluetooth or
cellular phone and the in-vehicle phone module. necting procedure is required. Your phone is www.nissan.ca/bluetooth for a recommended
With Bluetooth® wireless technology, you can automatically connected with the in-vehicle phone list and connecting instructions.
4-60 Display screen, heater, air conditioner, audio and phone systems
• You will not be able to use a hands-free phone • For additional information, refer to “Trouble- 2. this device must accept any interference, in-
under the following conditions: shooting guide” in this section. You can also visit cluding interference that may cause unde-
– Your vehicle is outside of the cellular service www.nissanusa.com/bluetooth or sired operation of the device.
area. www.nissan.ca/bluetooth for troubleshooting IC Regulatory information
– Your vehicle is in an area where it is difficult help if the hands-free phone system seems to
• Operation is subject to the following two condi-
to receive a cellular signal; such as in a be malfunctioning.
tions: (1) this device may not cause interfer-
tunnel, in an underground parking garage, • Some cellular phones or other devices may ence, and (2) this device must accept any inter-
near a tall building or in a mountainous area. cause interference or a buzzing noise to come ference, including interference that may cause
– Your cellular phone is locked to prevent it from the audio system speakers. Storing the undesired operation of the device.
from being dialed. device in a different location may reduce or
• This Class B digital apparatus meets all require-
• When the radio wave condition is not ideal or eliminate the noise.
ments of the Canadian Interference-Causing
ambient sound is too loud, it may be difficult to • Refer to the cellular phone Owner’s Manual Equipment Regulations.
hear the other person’s voice during a call. regarding the telephone charges, cellular phone
• Do not place the cellular phone in an area antenna and body, etc. BLUETOOTH® is a trademark
surrounded by metal or far away from the in- owned by Bluetooth SIG, Inc. and licensed to
vehicle phone module to prevent tone quality REGULATORY INFORMATION Visteon.
degradation and wireless connection FCC Regulatory information
USING THE SYSTEM
disruption.
CAUTION: To maintain compliance with FCC’s The NISSAN Voice Recognition system allows
• While a cellular phone is connected through the RF exposure guidelines, use only the supplied
Bluetooth® wireless connection, the battery hands-free operation of the Bluetooth® Hands-
antenna. Unauthorized antenna, modification, or Free Phone System.
power of the cellular phone may discharge attachments could damage the transmitter and
quicker than usual. The Bluetooth® Hands- may violate FCC regulations. If the vehicle is in motion, some commands may
Free Phone System cannot charge cellular not be available so full attention may be given to
phones. Operation is subject to the following two condi- vehicle operation.
tions:
1. This device may not cause interference and
Display screen, heater, air conditioner, audio and phone systems 4-61
Initialization Giving voice commands Voice Recognition session is cancelled, a
double beep is played to indicate you have
When the power switch is placed in the ON To operate NISSAN Voice Recognition, press
exited the system.
position, NISSAN Voice Recognition is initialized, and release the button located on the
which takes a few seconds. If the button is steering wheel. After the tone sounds, speak a • If you want to adjust the volume of the voice
pressed before the initialization completes, the command. feedback, press the volume control switches (+
system will announce “Hands-free phone system or -) on the steering wheel while being provided
The command given is picked up by the micro- with feedback. You can also use the radio vol-
not ready” and will not react to voice commands. phone, and voice feedback is given when the ume control knob.
Operating tips command is accepted.
Voice Prompt Interrupt
To get the best performance out of the NISSAN • If you need to hear the available commands for
Voice Recognition system, observe the following: the current menu again, say “Help” and the In most cases you can interrupt the voice feed-
system will repeat them. back to speak the next command by pressing the
• Keep the interior of the vehicle as quiet as
• If a command is not recognized, the system button on the steering wheel. After inter-
possible. Point all vents away from the micro-
announces, “Command not recognized. Please rupting the system, wait for a beep before speak-
phone area and close the windows to eliminate
try again.”Make sure the command is said ex- ing your command.
surrounding noises (traffic noises, vibration
sounds, etc.), which may prevent the system actly as prompted by the system and repeat the One Shot Call
from recognizing voice commands correctly. command in a clear voice.
To use the system faster, you may speak the
• Wait until the tone sounds before speaking a • If you want to go back to the previous command, second level commands with the main menu
command. Otherwise, the command will not be you can say “Go back” or “Correction” any time command on the main menu. For example, press
received properly. the system is waiting for a response. the button and after the tone say “Call
• Start speaking a command within 5 seconds • You can cancel a command when the system is Redial”.
after the tone sounds. waiting for a response by saying, “Cancel” or
“Quit.” The system announces “Cancel” and CONTROL BUTTONS
• Speak in a natural voice without pausing be-
ends the Voice Recognition session. You can The control buttons for the Bluetooth® Hands-
tween words.
also press and hold the button on the Free Phone System are located on the steering
steering wheel for 5 seconds at any time to end wheel.
the Voice Recognition session. Whenever the
4-62 Display screen, heater, air conditioner, audio and phone systems
Phone/end
While the Voice Recognition system is active,
press and hold the button for 5 seconds to
quit the Voice Recognition system at any time.
Tuning switch
While using the Voice Recognition system, tilt the
tuning switch up or down to manually control the
phone system.
Display screen, heater, air conditioner, audio and phone systems 4-63
Menu Item Result
Bluetooth ON/OFF Allows user to switch Bluetooth® on and off. Bluetooth® must be turned on in order to connect device.
On Turns Bluetooth® functionality on.
Off Turns Bluetooth® functionality off.
Add Phone or Device Upon pressing this button, a message with a PIN appears on the screen. Operate the Bluetooth® phone to enter the
PIN and complete the connection process.
Replace Phone Replace the phone currently connected to the system. This option allows the user to keep any voicetags that were re-
corded using the previous phone if vehicle is equipped with voice recognition.
The connecting procedure varies according to • Show Applications Once the correct phonebook entry is identified,
each phone. For additional information, refer to • Select Phone or Device say “Dial” to dial the number or “Send Text” to
the phone’s Owner’s Manual. You can also visit send a text message to that number. Say “Record
www.nissanusa.com/bluetooth or “Call” Name” to record a name for the phonebook entry.
www.nissan.ca/bluetooth or call the NISSAN For additional information, refer to “Making a call” Say “Delete Recording” to delete a recorded
Consumer Affairs Department for instructions on in this section. name for the phonebook entry.
connecting recommended cellular phones. • List Names
“Phonebook”
VOICE COMMANDS Speak this command to have the system list
The following commands are available under
the names in the phonebook one by one alpha-
Voice commands can be used to operate the “Phonebook”:
betically. Say “Dial” to dial the number of the
Bluetooth® Hands-Free Phone System. Press • (a name) current name or “Send Text” to send a text
the button and say “Phone” to bring up the Say a name in the phonebook to bring up a list message to that number. Say “Next Entry” or
phone command menu. The available options of options for a list of options for that phone- “Previous Entry” to move through the list al-
are: book entry. The system will say the name it phabetically. Say “Record Name” to record a
• Call interpreted based on the voice command pro- name for the current phonebook entry. Say
• Phonebook vided. If the name is incorrect, say “Correc- “Delete Recording” to delete a recorded name
• Recent Calls tion” to hear another name. for the current phonebook entry.
• Messaging
4-64 Display screen, heater, air conditioner, audio and phone systems
“Recent Calls” • Outgoing Note
The following commands are available under Speak this command to list the last five outgo- Compatible smartphone and registration
“Recent Calls”: ing calls from the vehicle. If the call was to an necessary to access applications. For ad-
entry in the phonebook, the name will be dis- ditional information, refer to “Nissan-
• Incoming
played. Otherwise, the phone number of the ConnectSM Mobile Apps” in this section.
Speak this command to list the last five incom- outgoing call will be displayed.
ing calls to the vehicle. If the call is from an “Select Phone or Device”
entry in the phonebook, the name will be dis- Say “Dial” to call the number or “Send Text” to
Speak this command to select a phone to use from
played. Otherwise, the phone number of the send a text message to that number. Say “Next
a list of those phones connected to the vehicle.
incoming call will be displayed. Entry” or “Previous Entry” to move through the list
of outgoing calls. MAKING A CALL
Say “Dial” to call the number or “Send Text” to
• Redial To make a call from a phone connected to the
send a text message to that number. Say “Next
Entry” or “Previous Entry” to move through the list Speak this command to call the last number vehicle’s Bluetooth® Hands-Free Phone System:
of incoming calls. dialed.
1. Press the button.
• Missed • Call back
2. The system will prompt you for a command.
Speak this command to list the last five missed Speak this command to call the number of the Say “Call”.
calls to the vehicle. If the call is from an entry in last incoming call to the vehicle.
3. Select on of the available voice commands to
the phonebook, the name will be displayed. “Messaging” continue:
Otherwise, the phone number of the missed • “(a name)” — Speak the name of a phone-
Speak this command to access text messaging
call will be displayed. book entry to place a call to that entry. The
functions. For additional information, refer to
Say “Dial” to call the number or “Send Text” to “Text messaging” in this section. system will respond with the name it inter-
send a text message to that number. Say “Next preted from your command and will prompt
Entry” or “Previous Entry” to move through the list “Show Applications” you to confirm that the name is correct. Say
of missed calls. Speak this command to display list of smart- “Yes” to initiate the call or “No” to hear an-
phone apps available. other name from the phonebook.
Display screen, heater, air conditioner, audio and phone systems 4-65
• “Number” — Speak this command to place a RECEIVING A CALL If supported by the phone, the Bluetooth®
call by inputting numbers. Hands-Free Phone System allows for call waiting
When a call is received by the phone connected
• For 7- and 10-digit phone numbers, speak functionality. If a call is received while another call
to the vehicle’s Bluetooth® Hands-Free Phone
the numbers. When finished, say “Dial” to is already active, a message will be displayed on
System, the call information is displayed on either
initiate the call. Say “Correction” at any time the screen. Press the button to hold the
the vehicle information display or both the vehicle
in the process to correct a misspoken or active call and switch to the second call. Press
information display and the control panel display.
misinterpreted number. the button to reject the second call.
• For phone numbers with more digits or spe- Press the button to accept the call. Press
While the second call is active, pressing the
cial characters, say “Special Number”, then the button to reject the call.
button will allow the same commands that
speak the digits. Up to 24 digits can be are available during any calls as well as two
entered. Available special characters are
DURING A CALL
additional commands:
“star”, “pound”, “plus” and “pause”. When When a call is active, press the button to
access additional options. Speak one of the fol- • “Switch Call” — Speak this command to hold
finished, say “Dial” to initiate the call. Say
lowing commands. the second call and switch back to the original
“Correction” at any time in the process to
call.
correct a misspoken or misinterpreted num- • “Send” — Speak this command followed by the
ber or character. digits to enter digits during the phone call. • “End Other Call” — Speak this command to stay
with the second call and end the original call.
• “Redial” — Speak this command to dial the • “Mute On” or “Mute Off” — Speak the command
number of the last outgoing call. The system to mute or unmute the system. Press the button to accept the call. Press
will display “Redialing <name/number>”. • “Transfer Call” — peak this command to transfer the button to reject the call.
The name of the phonebook entry will be the call to the handset. To transfer the call back
displayed if it available, otherwise the number ENDING A CALL
from the handset to the Bluetooth® Hands-
being redialed will be displayed. Free Phone System, press the button and To end an active call, press the button.
• “Call Back” — Speak this command to dial confirm when prompted.
the number of the last incoming call. The
system will display “Calling back <name/
number>”. The name of the phonebook entry
will be displayed if it available, otherwise the
number being called back will be displayed.
4-66 Display screen, heater, air conditioner, audio and phone systems
TEXT MESSAGING Note of the text message. Choose from the
Many phones may require special permis- following:
sion to enable text messaging. Check the • (a name)
WARNING phone’s screen during Bluetooth® pairing. • Missed Calls
• Laws in some jurisdictions may restrict For some phones, you may need to enable
• Incoming Calls
the use of “Text-to-Speech”. Check lo- ‘Notifications’ in the phone’s Bluetooth®
cal regulations before using this fea- menu for text messages to appear on the • Outgoing Calls
ture. headunit. Please consult your phone’s For additional information, refer to “Voice com-
• Laws in some jurisdictions may restrict Owner’s manual. Text message integration mands” in this section.
the use of some of the applications requires that the phone support MAP (Mes-
and features, such as social network- 5. Once a recipient is chosen, the system
sage Access Profile) for both receiving and prompts for which message to send. Nine
ing and texting. Check local regula-
tions for any requirements. sending text messages. Some phones may predefined messages are available as well as
• Use the text messaging feature after not support all text messaging features. three custom messages. To choose one of the
stopping your vehicle in a safe loca- Please visit www.nissanusa.com/ predefined messages, speak one of the fol-
tion. If you have to use the feature bluetooth or www.nissan.ca/bluetooth for lowing after the tone:
while driving, exercise extreme caution compatibility information, as well as your
• “Driving, can’t text”
at all times so full attention may be device’s Owner’s manual.
given to vehicle operation. • “Call me”
• If you are unable to devote full atten- The system allows for the sending and receiving
• “On my way”
tion to vehicle operation while using of text messages through the vehicle interface.
• “Running late”
the text messaging feature, pull off the Sending a text message:
road to a safe location and stop your • “Custom message”
vehicle. 1. Press the button on the steering wheel.
To send one of the custom messages, say
2. Say “Phone” after the tone. “Custom Messages”. If more than one custom
3. Say “Send Text” after the tone. message is stored, the system will prompt for
4. The system will provide a list of available the number of the desired custom message.
commands in order to determine the recipient
Display screen, heater, air conditioner, audio and phone systems 4-67
For additional information on setting and man- • Previous Text
aging custom text messages, refer to Speak this command to move to the previous
“Bluetooth® settings” in this section. text message.
Reading a received text message: • Next Text
1. Press the button on the steering wheel. Speak this command to move to the next text
2. Say “Messaging” after the tone. message.
3. Say “Read Text” after the tone. Note
The text message, sender and delivery time are Text messages are only displayed if the
shown on the screen. Use the tuning switch to vehicle speed is less than 5 mph
scroll through all text messages if more than one (8 km/h).
are available. Press the button to exit the
text message screen. Press the button to
access the following options for replying to the BLUETOOTH® SETTINGS
text message: To access and adjust the settings for the
• Call Back Bluetooth® Hands-Free Phone System:
Speak this command to call the sender of the 1. Press the ENTER/SETTING button.
text message using the Bluetooth® Hands- 2. Use the TUNE/SCROLL or TUNE/FOLDER
Free Phone System. knob to select “Bluetooth” and then press the
• Send Text ENTER button:
Speak this command to send a text message • Bluetooth
response to the sender of the text message. • Select “On” or “Off” to turn the vehicle’s
• Read Text Bluetooth® system on or off.
Speak this command to read the text message • Add Phone or Device
again. • For additional information, refer to “Connect-
ing procedure” in this section.
• Delete Phone or Device
4-68 Display screen, heater, air conditioner, audio and phone systems
• Select to delete a phone from the displayed connected to the Bluetooth® Hands-Free • Auto Reply Message
list. The system will ask to confirm before Phone System. The setting all the way to the • Select to choose the message that is sent
deleting the phone. left indicates that the new text sound will be when the Auto Reply function is enabled.
• Replace Phone muted. Choose from “I’m Driving” or one of the three
• Select to replace a phone from the displayed • Show Incoming Text custom messages stored in the system.
list. When a selection is made, the system • Select “Driver Only” to have incoming text • Vehicle Signature On/Off
will ask to confirm before proceeding. The messages displayed only in the vehicle infor- • Select to choose whether or not the vehicle
recorded phonebook for the phone being mation display. Select “Both” to have incom- signature is added to outgoing text mes-
deleted will be saved as long as the new ing text messages displayed in both the ve- sages from the vehicle. This message cannot
phone’s phonebook is the same as the old hicle information display and the center be changed or customized.
phone’s phonebook. display screen. Select “None” to have no
• Select Phone or Device display of incoming text messages. MANUAL CONTROLS
• Select to connect to a previously connected • Edit Custom Messages While using the Voice Recognition system, it is
phone from the displayed list. • Select to set a custom message that will be possible to select menu options by using the
• Phonebook Download available with the standard options when steering wheel controls instead of speaking voice
• Select to turn on or off the automatic down- sending a text message. To set a custom commands. This can be especially helpful if the
load of a connected phone’s phonebook. message, send a text message to your own noise of driving makes it difficult for Voice Rec-
phone number while the phone is connected ognition system to accurately interpret com-
• Show Incoming Calls
to the system. Three custom messages can mands. The manual control mode does not allow
• Select “Driver Only” to have incoming call
be set. Custom messages can only be set dialing a phone number by digits. The user may
information displayed only in the vehicle in-
while the vehicle is stationary. select an entry from the Phonebook or Recent
formation display. Select “Both” to have in-
• Auto Reply Calls lists. To re-activate Voice Recognition, exit
coming call information displayed in both the
• Select to turn on or off the Auto Reply func- the manual control mode by pressing and holding
vehicle information display and the center
tion. When enabled, the vehicle will auto- the PHONE/END ( ) button. At the time,
display screen.
matically send a predefined text message to pressing the PHONE/SEND ( ) button will
• Text Message start the Hands Free Phone System.
• Select to adjust the volume of the sound that the sender when a text message is received
plays when a new text is received by a phone while driving.
Display screen, heater, air conditioner, audio and phone systems 4-69
Operating tips ing on the audio display, it will also show the TROUBLESHOOTING GUIDE
• To enter manual control mode, start the Voice current menu option.
The system should respond correctly to all voice
Recognition system and tilt the tuning ( ) • To select the current menu option, press the commands without difficulty. If problems are en-
switch up or down. The system will speak PHONE/SEND ( ) button. countered, try the following solutions.
“Showing Manual Options” when manual con- • To go back to the previous menu, press the
Where the solutions are listed by number, try
trols are initially activated. PHOEN/END ( ) button. If the current
each solution in turn, starting with number 1, until
• To browse the menu options, tilt the tuning ( menu is the Main Menu, pressing the PHONE/
the problem is resolved.
) switch up or down. The system will al- END ( ) button will exit the Phone system.
ways speak the current menu option. Depend- • To exit the manual control mode, press and hold
the PHONE/END ( ) button for 5 seconds.
Symptom Solution
1. Ensure that the command is valid. For additional information, refer to “Voice commands”
in this section.
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient
noise level in the vehicle.
System fails to interrupt the command correctly. 4. Ensure that the ambient noise level is not excessive (for example, windows open or de-
froster on). NOTE: if it is too noisy to use the phone, it is likely that the voice commands
will not be recognized.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure
should be carried out to improve the recognition response for the speaker.
1. Ensure that the phone book entry name requested matches what was originally stored.
This can be confirmed by using the “List Names” command. For additional information,
The system consistently selects the wrong entry from the phone book. refer to “Phonebook” in this section.
2. Replace one of the names being confused with a new name.
3. Say First Name and Last Name of the desired contact to improve recognition.
4-70 Display screen, heater, air conditioner, audio and phone systems
BLUETOOTH® HANDS-FREE PHONE
SYSTEM WITH NAVIGATION SYSTEM NISSAN VOICE RECOGNITION
(IF SO EQUIPPED) SYSTEM (IF SO EQUIPPED)
For additional information, refer to the separate For additional information, refer to the separate
Navigation Owner’s Manual. Navigation Owner’s Manual.
Display screen, heater, air conditioner, audio and phone systems 4-71
NOTES
4-72 Display screen, heater, air conditioner, audio and phone systems
5 Starting and driving
Precautions when starting and driving . . . . . . . . . . .5-2 Precautions on cruise control . . . . . . . . . . . . .5-16
Tire Pressure Monitoring System (TPMS) . . . . . . .5-2 Cruise control operation . . . . . . . . . . . . . . . .5-17
Avoiding collision and rollover . . . . . . . . . . . . . .5-5 Increasing power economy . . . . . . . . . . . . . . . .5-18
Off-road recovery . . . . . . . . . . . . . . . . . . . . .5-6 Parking/parking on hills . . . . . . . . . . . . . . . . . . .5-18
Rapid air pressure loss . . . . . . . . . . . . . . . . . .5-6 Power steering system . . . . . . . . . . . . . . . . . . .5-19
Drinking alcohol/drugs and driving . . . . . . . . . . .5-7 Brake system. . . . . . . . . . . . . . . . . . . . . . . . .5-20
Push-button power switch . . . . . . . . . . . . . . . . . .5-7 Brake precautions . . . . . . . . . . . . . . . . . . . .5-20
NISSAN Intelligent Key® system . . . . . . . . . . . .5-7 Anti-lock Braking System (ABS) . . . . . . . . . . .5-22
Operating range for EV start function . . . . . . . . .5-8 Vehicle Dynamic Control (VDC) system . . . . . . . . .5-23
Power switch operation . . . . . . . . . . . . . . . . .5-9 Hill start assist system . . . . . . . . . . . . . . . . . . .5-24
Power switch positions . . . . . . . . . . . . . . . . .5-10 Cold weather driving . . . . . . . . . . . . . . . . . . . .5-25
Freeing a frozen door lock . . . . . . . . . . . . . . .5-26
Emergency EV shut off . . . . . . . . . . . . . . . . .5-10
Antifreeze . . . . . . . . . . . . . . . . . . . . . . . . .5-26
NISSAN Intelligent Key® battery discharge . . . . .5-10
12-volt battery . . . . . . . . . . . . . . . . . . . . . .5-26
Before starting the EV system . . . . . . . . . . . . . . .5-11
Starting the EV system . . . . . . . . . . . . . . . . . . .5-11 Draining of coolant water. . . . . . . . . . . . . . . .5-26
Driving the vehicle . . . . . . . . . . . . . . . . . . . . . .5-12 Tire equipment . . . . . . . . . . . . . . . . . . . . . .5-26
Electric shift control system . . . . . . . . . . . . . .5-12 Special winter equipment . . . . . . . . . . . . . . .5-26
Parking brake . . . . . . . . . . . . . . . . . . . . . . . .5-15 Driving on snow or ice . . . . . . . . . . . . . . . . .5-26
Cruise control . . . . . . . . . . . . . . . . . . . . . . . .5-16 Freeing a frozen charge port lid . . . . . . . . . . . .5-27
PRECAUTIONS WHEN STARTING
AND DRIVING
tion pressure label, you should determine the mately one minute and then remain continuously
WARNING proper tire inflation pressure for those tires.) illuminated. This sequence will continue upon
As an added safety feature, your vehicle has been subsequent vehicle start-ups as long as the mal-
• Do not leave children or adults who
would normally require the support of equipped with a Tire Pressure Monitoring System function exists. When the malfunction indicator is
others alone in your vehicle. Pets (TPMS) that illuminates a low tire pressure telltale illuminated, the system may not be able to detect
should not be left alone either. They when one or more of your tires is significantly or signal low tire pressure as intended. TPMS
could accidentally injure themselves or under-inflated. Accordingly, when the low tire malfunctions may occur for a variety of reasons,
others through inadvertent operation including the installation of replacement or alter-
pressure telltale illuminates, you should stop and
of the vehicle. Also, on hot, sunny days, nate tires or wheels on the vehicle that prevent
temperatures in a closed vehicle could check your tires as soon as possible, and inflate
them to the proper pressure. Driving on a signifi- the TPMS from functioning properly. Always
quickly become high enough to cause check the TPMS malfunction telltale after replac-
severe or possibly fatal injuries to cantly under-inflated tire causes the tire to over-
heat and can lead to tire failure. Under-inflation ing one or more tires or wheels on your vehicle to
people or animals.
also reduces power efficiency and tire tread life, ensure that the replacement or alternate tires and
• Properly secure all cargo with ropes or
straps to help prevent it from sliding or and may affect the vehicle’s handling and stop- wheels allow the TPMS to continue to function
shifting. Do not place cargo higher ping ability. properly.
than the seatbacks. In a sudden stop or
collision, unsecured cargo could cause Please note that the TPMS is not a substitute for Additional information
personal injury. proper tire maintenance, and it is the driver’s • Since the spare tire is not equipped with the
responsibility to maintain correct tire pressure, TPMS, the TPMS does not monitor the tire
TIRE PRESSURE MONITORING even if under-inflation has not reached the level to pressure of the spare tire.
SYSTEM (TPMS) trigger illumination of the TPMS low tire pressure • The TPMS will activate only when the vehicle is
telltale. driven at speeds above 16 mph (25 km/h). Also,
Each tire, should be checked monthly when cold
and inflated to the inflation pressure recom- Your vehicle has also been equipped with a this system may not detect a sudden drop in tire
mended by the vehicle manufacturer on the ve- TPMS malfunction indicator to indicate when the pressure (for example a flat tire while driving).
hicle placard or tire inflation pressure label. (If system is not operating properly. The TPMS mal- • The low tire pressure warning light does not
your vehicle has tires of a different size than the function indicator is combined with the low tire automatically turn off when the tire pressure is
size indicated on the vehicle placard or tire infla- pressure telltale. When the system detects a adjusted. After the tire is inflated to the recom-
malfunction, the telltale will flash for approxi- mended pressure, the vehicle must be driven at
WARNING
• If the READY to drive indicator light is
OFF while driving, the power assist for
the steering will not work. Steering will
be harder to operate.
• When the power steering warning light
illuminates while the READY to drive in-
dicator light is ON, the power assist for
the steering will cease operation. You
will still have control of the vehicle but
the steering will be harder to operate.
The power steering system is designed to pro-
vide power assistance while driving to operate
1. Firmly apply the parking brake. • HEADED UPHILL WITH CURB: 䊊 2 the steering wheel with less effort.
2. Push the P (Park) position switch on the shift • Turn the wheels away from the curb and When the steering wheel is operated repeatedly
lever. move the vehicle back until the curb side or continuously while parking or driving at a very
3. To help prevent the vehicle from rolling into wheel gently touches the curb. low speed, the power assist for the steering
the street when parked on a slope, it is a good • HEADED UPHILL OR DOWNHILL, NO wheel will be reduced. This is to prevent over-
practice to turn the wheels as illustrated. CURB: 䊊 3 heating of the power steering system and help
• HEADED DOWNHILL WITH CURB: 䊊 1 • Turn the wheels toward the side of the road protect it from getting damaged. When the
• Turn the wheels into the curb and move the so the vehicle will move away from the center power assistance is reduced, steering wheel op-
vehicle forward until the curb side wheel of the road if it moves. eration will become harder. When the tempera-
gently touches the curb. 4. Place the power switch in the OFF position. ture of the power steering system goes down, the
power assistance level will return to normal.
Avoid repeating such steering wheel operations
that could cause the power steering system to
overheat.
Starting and driving 5-19
BRAKE SYSTEM
You may hear a noise when the steering wheel is BRAKE PRECAUTIONS regenerative brake is applied than in the D (Drive)
operated quickly. However, this is not a malfunc- position. However, during high-speed driving you
This vehicle is equipped with two braking sys-
tion. may feel that regenerative brake provides less
tems:
If the power steering warning light illumi- deceleration than the engine braking in an ordi-
1. Hydraulic brake system nary vehicle. This is normal.
nates while the READY to drive indicator light is
ON, it may indicate the power steering system is 2. Regenerative brake system Less deceleration is provided by the regenerative
not functioning properly and may need servicing. Hydraulic brake system brake system when the Li-ion battery is fully
Have the power steering system checked by a charged. Regenerative brake is automatically re-
The hydraulic brake system is similar to the
NISSAN certified LEAF dealer. For additional duced when the Li-ion battery is fully charged to
brakes used on conventional vehicles.
information, refer to “Power steering warning prevent the Li-ion battery from becoming over-
light” in the “Instruments and controls” section of The brake system has two separate hydraulic charged. Regenerative brake is also automati-
this manual. circuits. If one circuit malfunctions, you will still cally reduced when the battery temperature is
have braking at two wheels. high/low (indicated by the red/blue zones on the
The power assist for steering stops operating
battery temperature gauge) to prevent Li-ion bat-
when both the power steering warning light and Regenerative brake system
READY to drive indicator light are illuminated. tery damage.
The primary purpose of the regenerative brake
You will still have control of the vehicle. However, system is to provide some power to help re- The brake pedal should be used to slow or stop
greater steering effort is needed, especially in charge the Li-ion battery and extend driving the vehicle depending on traffic or road condi-
sharp turns and at low speeds. range. A secondary benefit is “engine braking” tions. The vehicle brakes are not affected by
that operates based on battery conditions. regenerative brake system operation.
WARNING
Observe the following precautions when
using the tire repair compound.
• Swallowing the compound is danger- 1. Take out the speed restriction sticker from the
ous. Immediately drink as much water air compressor, then put it in a location where
as possible and seek prompt medical the driver can see it while driving.
assistance.
• Rinse well with lots of water if the
compound comes into contact with CAUTION
skin or eyes. If irritation persists, seek Do not put the speed restriction label on
prompt medical attention. the steering wheel pad, the speedometer
• Keep the repair compound out of the or the warning light locations.
reach of children.
5. Remove the protective cap 䊊 A of the hose 6. Push the power switch to the “ACC” position.
and screw the hose securely onto the tire Then turn the compressor switch to the ON
valve. Make sure that the pressure release (−) position and inflate the tire up to the
valve 䊊B is securely tightened. Make sure that pressure that is specified on the Tire and
the air compressor switch is in the OFF (O) Loading Information label affixed to the driv-
position, and then insert the power plug into er’s side center pillar if possible, or to the
the power outlet in the vehicle. minimum of 26 psi (180 kPa). Turn the air
compressor off briefly in order to check the
tire pressure with the pressure gauge.
If the tire is inflated to higher than the specified
pressure, lower the tire pressure by releasing
air with the pressure release valve.
WARNING
• Never ride in a vehicle that is being
towed.
• Never get under your vehicle after it
has been lifted by a tow truck.
CAUTION
• When towing, make sure that the ax-
les, steering system and power train
are in working condition. If any unit is
damaged, dollies must be used.
• Always attach safety chains before
towing.
WARNING
• Stand clear of a stuck vehicle.
• Do not spin your tires at high speed.
This could cause them to explode,
which could result in serious injury.
TOWING RECOMMENDED BY Parts of the vehicle could also over-
• When towing this vehicle with the rear heat and be damaged.
NISSAN wheels on the ground (if you do not
use towing dollies): Always release Pulling a stuck vehicle
NISSAN recommends that your vehicle be towed
the parking brake.
with the driving (front) wheels off the ground or
that the vehicle be placed on a flatbed truck as NOTE:
illustrated. If your vehicle cannot be moved because CAUTION
the vehicle cannot to be shifted to the N • Contact a professional towing service
CAUTION (Neutral) position, please refer to the LEAF to recover the vehicle if you have ques-
Roadside Assistance Guide which is lo- tions regarding the recovery proce-
• Never tow with the front wheels on the cated at www.NISSANUSA.com. If your ve- dure.
ground or four wheels on the ground • Tow chains or cables must be attached
hicle cannot be moved because the parking
(forward or backward), as this may only to main structural members of the
cause serious and expensive damage brake cannot be released, refer to “Parking
brake” in the “Starting and driving” section vehicle.
to the motor.
of this manual.
ENVIRONMENTAL FACTORS
INFLUENCE THE RATE OF
CORROSION
Bracket position Moisture
The illustration shows the location of floor mat Accumulation of sand, dirt and water on the ve-
brackets. hicle body underside can accelerate corrosion.
SEAT BELTS Wet floor coverings will not dry completely inside
the vehicle, and should be removed for drying to
The seat belts can be cleaned by wiping them avoid floor panel corrosion.
with a sponge dampened in a mild soap solution.
Allow the belts to dry completely in the shade Relative humidity
before using them. Corrosion will be accelerated in areas of high
For additional information, refer to “Seat belts” in relative humidity, especially those areas where
the “Safety-Seats seat belts and supplemental the temperatures stay above freezing, where at-
restraint system” section of this manual. mospheric pollution exists, or where road salt is
used.
Fusible links fusible links are melted, replace only with Genu-
ine NISSAN parts.
If any electrical equipment does not operate and
the fuses are in good condition, check the fusible For checking and replacing the fusible links in the
links in the holders 䊊1 ,䊊
2 and 䊊 3 . If any of these holders 䊊
1 ,䊊2 and 䊊 3 , contact a NISSAN certi-
fied LEAF dealer.
WARNING Use a cloth 䊊C to protect the fuse box cover. 6. If a new fuse also opens, have the electrical
Never use a fuse of a higher or lower 3. Then pull to remove the fuse box cover 䊊 2 . system checked, and if necessary repaired,
by a NISSAN certified LEAF dealer.
amperage rating than that specified on 4. Remove the fuse with the fuse puller 䊊 3 .
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
1. Make sure that the power switch and the
headlight switch are turned off.
: REMOVE
: INSTALL
CAUTION
The use of any other refrigerant or oil will
cause severe damage to the air condi-
tioning system and will require the re-
placement of all air conditioner system
components.
The refrigerant, HFC-134a (R-134a), in your
NISSAN vehicle will not harm the earth’s ozone
layer. Although this refrigerant does not affect the
earth’s atmosphere, certain governmental regu-
lations require the recovery and recycling of any
refrigerant during automotive air conditioning
system service. A NISSAN certified LEAF dealer
has the trained technicians and equipment
needed to recover and recycle your air condition-
ing system refrigerant.
Contact a NISSAN certified LEAF dealer when
servicing your air conditioning system.
The Federal/Canadian Motor Vehicle Safety The emission control information label is at- The cold tire pressure is shown on the Tire and
Standards (F.M.V.S.S./C.M.V.S.S.) certification tached to the underside of the hood as shown in Loading Information label affixed to the driver’s
label is affixed as shown. This label contains the illustration. side center pillar as shown.
valuable vehicle information, such as: Gross Ve-
hicle Weight Ratings (GVWR), Gross Axle
Weight Rating (GAWR), month and year of
manufacture, Vehicle Identification Number
(VIN), etc. Review it carefully.
10-2 Index
Li-ion battery capacity level gauge . . . . .2-10 Immediate charge . . . . . . . . . . . . . . .CH-25 F.M.V.S.S./C.M.V.S.S. certification label . . .9-9
Li-ion battery temperature gauge . . . . . . .2-6 Immobilizer system. . . . . . . . . . . . . . . .2-37 Motor serial number . . . . . . . . . . . . . .9-8
Odometer. . . . . . . . . . . . . . . . . . . .2-6 Indicator lights . . . . . . . . . . . . . . . . . .2-19 Tire and Loading information label . . .8-29, 9-9
Power meter . . . . . . . . . . . . . . . . . .2-7 Indicators for operation . . . . . . . . . . . . .2-23 Vehicle identification number (VIN) . . . . . .9-7
Speedometer. . . . . . . . . . . . . . . . . .2-6 Inside rearview mirror . . . . . . . . . . . . . .3-23 LATCH system . . . . . . . . . . . . . . . . . .1-20
General maintenance . . . . . . . . . . . . . . .8-2 Instrument brightness control . . . . . . . . . .2-41 License plate, Installing front license plate . . .9-10
Glove box. . . . . . . . . . . . . . . . . . . . .2-53 Intelligent Key system . . . . . . . . . . . . . .3-13 Light . . . . . . . . . . . . . . . . . . . . . . .1-54
Remote keyless operation . . . . . . . . . .3-13 Air bag warning light . . . . . . . . . . . . .1-54
Interior light replacement . . . . . . . . . . . .8-24 Bulb replacement. . . . . . . . . . . . . . .8-22
H
Interior lights . . . . . . . . . . . . . . . . . . .2-58 Ceiling light . . . . . . . . . . . . . . . . . .2-58
Hazard warning flasher switch . . . . . . . . . .6-2 ISOFIX child restraint . . . . . . . . . . . . . .1-20 Fog light switch. . . . . . . . . . . . . . . .2-45
Headlights . . . . . . . . . . . . . . . . . . . .8-23 Headlights bulb replacement . . . . . . . .8-23
Bulb replacement. . . . . . . . . . . . . . .8-23 Headlight switch . . . . . . . . . . . . . . .2-42
J
Headlight switch . . . . . . . . . . . . . . .2-42 Indicator lights . . . . . . . . . . . . . . . .2-19
Heated seat switch . . . . . . . . . . . . . . .2-47 Jump starting . . . . . . . . . . . . . . . . . . .6-10 Interior lights . . . . . . . . . . . . . . . . .2-58
Heated steering wheel switch . . . . . . . . .2-45 Map lights . . . . . . . . . . . . . . . . . . .2-58
High voltage precautions . . . . . . . . . . . .EV-7 Replacement . . . . . . . . . . . . . . . . .8-22
K Warning lights . . . . . . . . . . . . . . . .2-13
Hill Start . . . . . . . . . . . . . . . . . . . . .5-24
Hill Start Assist. . . . . . . . . . . . . . . . . .5-24 Light reminder warning . . . . . . . . . . . . .2-24
Keyless entry . . . . . . . . . . . . . . . . . . .3-13 Lights, Exterior and interior light
HomeLink® universal transceiver. . . . . . . .2-59 With Intelligent Key system
Hood release . . . . . . . . . . . . . . . . . . .3-17 replacement . . . . . . . . . . . . . . . . . . .8-24
(Refer to Intelligent Key system) . . . . . . .3-13 Li-ion battery . . . . . . . . . . . . . . . . . . .EV-2
Horn . . . . . . . . . . . . . . . . . . . . . . .2-46 Keys . . . . . . . . . . . . . . . . . . . . . . . .3-2
How to normal charge . . . . . . . . . . . . .CH-9 Li-ion battery available charge gauge . . . . . .2-9
For Intelligent Key system . . . . . . . . . . .3-6 Li-ion battery capacity level gauge . . . . . . .2-10
How to quick charge . . . . . . . . . . . . .CH-15
How to trickle charge (if so equipped). . . .CH-11 Li-ion battery status check . . . . . . . . . .CH-26
L Li-ion battery temperature gauge. . . . . . . . .2-6
Li-ion battery warmer . . . . . . . . . . . . . .EV-5
I Labels. . . . . . . . . . . . . . . . . . . . . . .1-54 Limited power . . . . . . . . . . . . . . . . . .2-33
Air bag warning labels . . . . . . . . . . . .1-54 Loading information
If the Li-ion battery becomes completely Air conditioner specification label . . . . . .9-10 (Refer to vehicle loading information) . . . . .9-11
discharged . . . . . . . . . . . . . . . . . . . .6-12 Emission control information label . . . . . .9-9 Lock . . . . . . . . . . . . . . . . . . . . . . . .3-6
Index 10-3
Automatic door locks . . . . . . . . . . . . .3-6 Parking brake break-in. . . . . . . . . . . . . .5-21
N
Door locks . . . . . . . . . . . . . . . . . . .3-4 Power . . . . . . . . . . . . . . . . . . . . . . .3-4
Power door lock . . . . . . . . . . . . . . . .3-4 NISSAN Intelligent Key® system . . . . . .3-6, 5-7 Power door lock . . . . . . . . . . . . . . . .3-4
Rear hatch lock . . . . . . . . . . . . . . . .3-18 Key operating range of the door lock/unlock Power steering system . . . . . . . . . . . .5-19
Low tire pressure warning light . . . . . . . . .2-16 function . . . . . . . . . . . . . . . . . . . . .3-8 Power windows. . . . . . . . . . . . . . . .2-55
Low tire pressure warning system (Refer to Tire Key operation. . . . . . . . . . . . . . . . . .3-9 Power economy . . . . . . . . . . . . . . . . .5-18
Pressure Monitoring System (TPMS)) . . . . . .5-2 NISSAN Vehicle Immobilizer System . . . . . .2-37 Power meter . . . . . . . . . . . . . . . . . . . .2-7
Normal charge. . . . . . . . . . . . . . . . . .CH-9 Power outlet . . . . . . . . . . . . . . . . . . .2-50
Home charge . . . . . . . . . . . . . . . .CH-9 Power steering system . . . . . . . . . . . . .5-19
M
Occasional charge . . . . . . . . . . . . .CH-9 Power switch . . . . . . . . . . . . . . . . .5-7, 5-9
Maintenance . . . . . . . . . . . . . . . . . . .8-12 Public charge . . . . . . . . . . . . . . . .CH-9 Precautions. . . . . . . . . . . . . . . . . . . .5-20
12-volt battery . . . . . . . . . . . . . . . .8-12 Brake precautions . . . . . . . . . . . . . .5-20
General maintenance . . . . . . . . . . . . .8-2 Charging . . . . . . . . . . . . . . . . . . .CH-2
O Child restraints . . . . . . . . . . . . . . . .1-18
Indicators for maintenance. . . . . . . . . .2-34
Inside vehicle . . . . . . . . . . . . . . . . . .8-3 Cruise control. . . . . . . . . . . . . . . . .5-16
Odometer . . . . . . . . . . . . . . . . . . . . .2-6
Maintenance precautions . . . . . . . . . . .8-5 High voltage precautions . . . . . . . . . .EV-7
Off-road recovery . . . . . . . . . . . . . . . . .5-6
Maintenance requirements . . . . . . . . . .8-2 Maintenance . . . . . . . . . . . . . . . . . .8-5
Oil . . . . . . . . . . . . . . . . . . . . . . . . .9-2
Outside vehicle. . . . . . . . . . . . . . . . .8-2 Road accident precautions . . . . . . . . .EV-8
Recommended fluids/lubricants and
Seat belt maintenance . . . . . . . . . . . .1-15 Seat belt usage . . . . . . . . . . . . . . . .1-8
capacities. . . . . . . . . . . . . . . . . . . .9-2
Manual front seat adjustment . . . . . . . . . . .1-3 Supplemental restraint system. . . . . . . .1-38
Opening rear hatch . . . . . . . . . . . . . . .3-11
Map lights . . . . . . . . . . . . . . . . . . . .2-58 When starting and driving . . . . . . . . . . .5-2
Outside air temperature . . . . . . . . . . . . .2-10
Mechanical key (Intelligent Key system) . . . . .3-3 Push starting . . . . . . . . . . . . . . . . . . .6-13
Outside mirrors . . . . . . . . . . . . . . . . .3-24
Mirror . . . . . . . . . . . . . . . . . . . . . . .3-23 Owner’s Manual/Service Manual order
Inside rearview mirror. . . . . . . . . . . . .3-23 information . . . . . . . . . . . . . . . . . . . .9-19 Q
Outside mirrors . . . . . . . . . . . . . . . .3-24
Vanity mirror. . . . . . . . . . . . . . . . . .3-22 Quick charge . . . . . . . . . . . . . . . . .CH-15
Motor . . . . . . . . . . . . . . . . . . . .5-11, 9-6 P
Before starting system . . . . . . . . . . . .5-11
Panic alarm . . . . . . . . . . . . . . . . . . . .3-15 R
Motor compartment . . . . . . . . . . . . . . . .8-7
Parking . . . . . . . . . . . . . . . . . . . . . .5-15
Parking on hills . . . . . . . . . . . . . . . .5-18 Rapid air pressure loss . . . . . . . . . . . . . .5-6
10-4 Index
Rear center seat belt . . . . . . . . . . . . . .1-14 Before driving your vehicle Servicing climate control . . . . . . . . . . . .4-38
Rear door lock, Child safety rear door lock . . .3-6 (models with navigation system) . . . . . .EV-13 Shifting . . . . . . . . . . . . . . . . . . . . . .5-12
Rear hatch . . . . . . . . . . . . . . . . . . . .3-18 Charging the Li-ion battery. . . . . . . . .EV-10 Electric shift control system . . . . . . . . .5-12
Rear seats . . . . . . . . . . . . . . . . . . . . .1-4 Driving the vehicle . . . . . . . . . . . . .EV-18 Shoulder belt height adjustment, For front
RearView Monitor . . . . . . . . . . . . . . . . .4-3 Parking the vehicle . . . . . . . . . . . . .EV-21 seats . . . . . . . . . . . . . . . . . . . . . . .1-14
Rear window and outside mirror defroster Starting your vehicle . . . . . . . . . . . .EV-17 Solar cell module (if so equipped) . . . . . . . .7-3
switch. . . . . . . . . . . . . . . . . . . . . . .2-41 Seat adjustment . . . . . . . . . . . . . . . . . .1-3 Speedometer . . . . . . . . . . . . . . . . . . .2-6
Rear window wiper and washer switch . . . .2-40 Front manual seat adjustment . . . . . . . . .1-3 Starting . . . . . . . . . . . . . . . . . . . . . .5-11
Recommended fluids/lubricants and Front seats . . . . . . . . . . . . . . . . . . .1-3 Before starting system . . . . . . . . . . . .5-11
capacities . . . . . . . . . . . . . . . . . . . . .9-2 Seat belt(s) . . . . . . . . . . . . . . . . . . . .1-16 Jump starting . . . . . . . . . . . . . . . . .6-10
Reduction gear fluid . . . . . . . . . . . . . . .8-10 Child safety . . . . . . . . . . . . . . . . . .1-16 Precautions when starting and driving . . . .5-2
Remote charge . . . . . . . . . . . . . . . .CH-26 Infants . . . . . . . . . . . . . . . . . . . . .1-17 Push starting . . . . . . . . . . . . . . . . .6-13
Remote climate control . . . . . . . . . . . . .4-36 Injured persons . . . . . . . . . . . . . . . .1-11 Status light, Front passenger air bag . . . . . .1-45
Remote keyless entry function, For Intelligent Larger children . . . . . . . . . . . . . . . .1-17 Steering . . . . . . . . . . . . . . . . . . . . .2-45
Key system . . . . . . . . . . . . . . . . . . . .3-13 Precautions on seat belt usage . . . . . . . .1-8 Heated steering wheel . . . . . . . . . . . .2-45
Repairing flat tire . . . . . . . . . . . . . . . . .6-4 Pregnant women . . . . . . . . . . . . . . .1-11 Power steering system . . . . . . . . . . . .5-19
Repairing tire . . . . . . . . . . . . . . . . . . .6-6 Rear center seat belt . . . . . . . . . . . . .1-14 Tilting steering column . . . . . . . . . . . .3-21
Reporting safety defects . . . . . . . . . . . .9-15 Seat belt cleaning . . . . . . . . . . . . . . .7-6 Stopping the vehicle . . . . . . . . . . . . . . .6-5
Road accident precautions . . . . . . . . . . .EV-8 Seat belt extenders. . . . . . . . . . . . . .1-15 Storage . . . . . . . . . . . . . . . . . . . . . .2-51
Roadside assistance program . . . . . . . . . .6-2 Seat belt hooks . . . . . . . . . . . . . . . .1-15 Stowing golf bags . . . . . . . . . . . . . . . .2-55
Rollover . . . . . . . . . . . . . . . . . . . . . .5-5 Seat belt maintenance . . . . . . . . . . . .1-15 Sun visors . . . . . . . . . . . . . . . . . . . .3-22
Seat belts. . . . . . . . . . . . . . . . . . . .1-8 Supplemental air bag warning labels . . . . . .1-54
Seat belts with pretensioners . . . . . . . .1-53 Supplemental air bag warning light . . .1-54, 2-19
S
Seat belt warning light . . . . . . . . . . . .2-18 Supplemental restraint system . . . . . . . . .1-38
Safety . . . . . . . . . . . . . . . . . . . . . . .1-16 Shoulder belt height adjustment. . . . . . .1-14 Precautions on supplemental restraint
Child seat belts . . . . . . . . . . . . . . . .1-16 Small children. . . . . . . . . . . . . . . . .1-17 system. . . . . . . . . . . . . . . . . . . . .1-38
Reporting safety defects . . . . . . . . . . .9-15 Three-point type . . . . . . . . . . . . . . .1-11 Switch . . . . . . . . . . . . . . . . . . . . . .2-42
Scene guide . . . . . . . . . . . . . . . . . .EV-22 Seat(s), Seats . . . . . . . . . . . . . . . . . . .1-2 Autolight switch. . . . . . . . . . . . . . . .2-42
At home after driving . . . . . . . . . . . .EV-22 Heated seats . . . . . . . . . . . . . . . . .2-47 Charge timer OFF switch . . . . . . . . . .2-50
Security system (NISSAN Vehicle Immobilizer ECO switch . . . . . . . . . . . . . . . . . .2-47
System), EV system start . . . . . . . . . . . .2-37 Fog light switch. . . . . . . . . . . . . . . .2-45
Index 10-5
Hazard warning flasher switch . . . . . . . .6-2 Uniform tire quality grading . . . . . . . . .9-14
V
Headlight switch . . . . . . . . . . . . . . .2-42 Wheels and tires . . . . . . . . . . . . . . .8-27
Power door lock switch . . . . . . . . . . . .3-5 Wheel/tire size . . . . . . . . . . . . . . . . .9-6 Vanity mirror . . . . . . . . . . . . . . . . . . .3-22
Rear window and outside mirror defroster tonneau cover . . . . . . . . . . . . . . . . . .2-53 Vehicle . . . . . . . . . . . . . . . . . . . . . . .9-6
switch . . . . . . . . . . . . . . . . . . . . .2-41 Top . . . . . . . . . . . . . . . . . . . . . . . .1-22 Dimensions and weights. . . . . . . . . . . .9-6
Turn signal switch . . . . . . . . . . . . . .2-44 Tether strap child restraints . . . . . . . . .1-22 Identification number (VIN) . . . . . . . . . .9-7
Vehicle Dynamic Control (VDC) off Towing . . . . . . . . . . . . . . . . . . . . . .9-14 Loading information . . . . . . . . . . . . .9-11
switch . . . . . . . . . . . . . . . . . . . . .2-48 Flat towing . . . . . . . . . . . . . . . . . .9-14 Recovery (freeing stuck vehicle). . . . . . .6-14
Towing a trailer . . . . . . . . . . . . . . . .9-14 Security system. . . . . . . . . . . . . . . .2-36
Tow truck towing . . . . . . . . . . . . . . .6-13 Vehicle Dynamic Control (VDC) off
T
TPMS, Tire Pressure Monitoring System . . . .5-2 switch . . . . . . . . . . . . . . . . . . . . .2-48
Telematics overview . . . . . . . . . . . . . . .9-16 TPMS, Tire pressure warning system . . . . . .6-3 Vehicle dynamic control (VDC) system . . .5-23
Temperature . . . . . . . . . . . . . . . . . . . .2-6 Traction motor . . . . . . . . . . . . . . . . . . .9-8 Vehicle information display . . . . . . . . . . .2-22
Li-ion battery temperature gauge . . . . . . .2-6 Traction motor serial number . . . . . . . . .9-8 Vehicle security system . . . . . . . . . . . . .2-36
Theft (NISSAN Vehicle Immobilizer System), Trailer towing . . . . . . . . . . . . . . . . . . .9-14 Vents . . . . . . . . . . . . . . . . . . . . . . .4-21
traction motor start. . . . . . . . . . . . . . . .2-37 Transceiver, HomeLink® Universal . . . . . . .2-59
Tilt steering column . . . . . . . . . . . . . . .3-21 Transceiver . . . . . . . . . . . . . . . . . .2-59
Transmitter, With Intelligent Key system W
Tire . . . . . . . . . . . . . . . . . . . . . . . .2-16
Low tire pressure warning light . . . . . . .2-16 (Refer to Intelligent Key system) . . . . . . . .3-13
Warning . . . . . . . . . . . . . . . . . . . . . .6-2
Tires . . . . . . . . . . . . . . . . . . . . . . . .6-3 Trickle charge . . . . . . . . . . . . . . . . .CH-11
Hazard warning flasher switch . . . . . . . .6-2
Flat tire . . . . . . . . . . . . . . . . . . . . .6-3 Trip computer . . . . . . . . . . . . . . . . . .2-27
Indicators for operation . . . . . . . . . . .2-23
Low tire pressure warning system . . . . . .5-2 Turn signal switch . . . . . . . . . . . . . . . .2-44
Tire Pressure Monitoring System (TPMS) . .5-2
Tire and Loading information label . . .8-29, 9-9 Type of charge and how to charge the Li-ion
Tire pressure monitoring system (TPMS). . .6-3
Tire chains . . . . . . . . . . . . . . . . . .8-34 battery . . . . . . . . . . . . . . . . . . . . . .CH-5
Warning/indicator lights and audible
Tire dressing . . . . . . . . . . . . . . . . . .7-4 reminders . . . . . . . . . . . . . . . . . . .2-12
Tire pressure . . . . . . . . . . . . . . . . .8-29 U Warning information displays . . . . . . . .2-32
Tire Pressure Monitoring System (TPMS) . .5-2 Warning lights . . . . . . . . . . . . . . . .2-13
Tire pressure monitoring system (TPMS). . .6-3 Underbody cleaning . . . . . . . . . . . . . . . .7-3 Warning and indicator lights . . . . . . . . . .0-11
Tire rotation . . . . . . . . . . . . . . . . . .8-34 Uniform tire quality grading . . . . . . . . . . .9-14 Warning information displays . . . . . . . . . .2-32
Types of tires . . . . . . . . . . . . . . . . .8-33 Unplugged status . . . . . . . . . . . . . . .CH-26 Warning labels, Air bag warning labels. . . . .1-54
10-6 Index
Warning light . . . . . . . . . . . . . . . . . . .1-54
Air bag warning light . . . . . . . . .1-54, 2-19
Anti-lock braking system (ABS) warning
light . . . . . . . . . . . . . . . . . . . . . .2-14
BRAKE system warning light (yellow). . . .2-14
BRAKE warning light (red). . . . . . . . . .2-15
Low tire pressure warning light . . . . . . .2-16
Seat belt warning light . . . . . . . . . . . .2-18
Washer switch . . . . . . . . . . . . . . . . . .2-40
Rear window wiper and washer switch . . .2-40
Windshield wiper and washer switch . . . .2-38
Washing . . . . . . . . . . . . . . . . . . . . . .7-2
Waxing . . . . . . . . . . . . . . . . . . . . . . .7-2
Weights (Refer to Dimensions and weights) . .9-6
Wheels and tires . . . . . . . . . . . . . . . . .8-27
Care of wheels . . . . . . . . . . . . . . . . .7-3
Cleaning aluminum alloy wheels . . . . . . .7-3
Wheel/tire size. . . . . . . . . . . . . . . . . . .9-6
When traveling or registering your vehicle in
another country . . . . . . . . . . . . . . . . . .9-7
Window(s) . . . . . . . . . . . . . . . . . . . . .7-3
Cleaning . . . . . . . . . . . . . . . . . . . .7-3
Power windows. . . . . . . . . . . . . . . .2-55
Windshield-washer fluid. . . . . . . . . . . . .8-11
Windshield wiper and washer switch . . . . .2-38
Wiper . . . . . . . . . . . . . . . . . . . . . . .8-14
Pulling up the wiper arm . . . . . . . . . . .8-14
Rear window wiper and washer switch . .2-40
Rear window wiper blade . . . . . . . . . .8-16
Windshield wiper and washer switch . . . .2-38
Wiper blades . . . . . . . . . . . . .8-13, 8-15
Index 10-7
2016 NISSAN LEAF
®
2016 L EAF
OWNER’S MANUAL
ZEO-D
Printing : July 2015 (14)
Publication No.: OM16EA
0C11U0 0ZE0U0 For your safety, read carefully and keep in this vehicle.
Printed in U.S.A. '16 ZEO-D
Owner’s Manual Supplement
The information contained within this supplement updates the following information in the
2016 NISSAN Rogue, 2016 NISSAN Altima, 2016 NISSAN Sentra, 2016 NISSAN
Pathfinder, 2016 NISSAN Pathfinder HEV, 2016 NISSAN Leaf, 2016 NISSAN NV200
Cargo, 2016 NISSAN NV200 Taxi, 2016 NISSAN Murano, 2016 NISSAN Murano HEV,
2016 NISSAN Maxima, and 2017 NISSAN Maxima Owner’s Manual:
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) in the “Safety—Seats, seat belts and
supplemental restraint system” section.
● If the Passenger Air bag Status light ( ) is illuminated with the front passenger seat
empty, refer to this addendum card (vehicles built on or after 4/1/2016).
● If the Passenger Air bag Status light ( ) is OFF with the front passenger seat empty,
refer to the information in the Owner’s Manual (vehicles built before 4/1/2016).
● Roof-mounted curtain side-impact and roll- The SRS is designed to supplement the crash
over supplemental air bag protection provided by the driver and front pas-
senger seat belts and is not a substitute for
● Seat belt with pretensioner(s) (front seats) them. Seat belts should always be correctly worn
Supplemental front-impact air bag system and the occupant seated a suitable distance
away from the steering wheel, instrument panel
The NISSAN Advanced Air Bag System can help and door finishers. For additional information
cushion the impact force to the head and chest of about instructions and precautions on seat belt
the driver and front passenger in certain frontal usage, refer to “Seat belts” in this section.
collisions.
The supplemental air bags operate only
Front seat-mounted side-impact supple- when the ignition switch is placed in the ON
mental air bag system position.
This system can help cushion the impact force to After placing the ignition switch in the ON
the chest area of the driver and front passenger in position, the supplemental air bag warning
certain side-impact collisions. The side air bags light illuminates. The supplemental air bag
are designed to inflate on the side where the warning light will turn off after about 7 sec-
vehicle is impacted. onds if the system is operational.
the seatback and as far away as practi-
cal from the steering wheel or instru-
ment panel. Always properly use the
seat belts.
● The driver and front passenger seat belt
buckles are equipped with sensors that
detect if the seat belts are fastened. The
NISSAN Advanced Air Bag System
monitors the severity of a collision and
seat belt usage, then inflates the air
bags as needed. Failure to properly
wear seat belts can increase the risk or
severity of injury in an accident.
WRS0031 ● The front passenger seat is equipped
with an occupant classification sensor
WARNING ● The seat belts and the front air bags are
(weight sensor) that turns the front pas-
most effective when you are sitting well
● The front air bags ordinarily will not back and upright in the seat. The front
senger air bag OFF under some condi-
inflate in the event of a side impact, rear tions. This sensor is only used in this
air bags inflate with great force. Even
impact, rollover, or lower severity fron- seat. Failure to be properly seated and
with the NISSAN Advanced Air Bag Sys-
tal collision. Always wear your seat wearing the seat belt can increase the
tem, if you are unrestrained, leaning
belts to help reduce the risk or severity risk or severity of injury in an accident.
forward, sitting sideways or out of posi-
of injury in various kinds of accidents. For additional information, refer to
tion in any way, you are at greater risk of
“Front passenger air bag and status
● The front passenger air bag will not injury or death in a crash. You may also
light” in this section.
inflate if the passenger air bag status receive serious or fatal injuries from the
light is lit. For additional information, front air bag if you are up against it ● Keep hands on the outside of the steer-
refer to “Front passenger air bag and when it inflates. Always sit back against ing wheel. Placing them inside the
status light” in this section. steering wheel rim could increase the
risk that they are injured when the front
air bag inflates.
ARS1133 ARS1041
WARNING
● Never let children ride unrestrained or
extend their hands or face out of the
window. Do not attempt to hold them in
your lap or arms. Some examples of
dangerous riding positions are shown
in the illustrations
ARS1042 ARS1043 ARS1044
WARNING
● Children may be severely injured or
killed when the front air bags, side air
bags or curtain air bags inflate if they
are not properly restrained. Pre-teens
and children should be properly re-
strained in the rear seat, if possible.
ARS1045 ARS1046 WRS0431
WARNING WARNING
● Even with the NISSAN Advanced Air Front seat-mounted side-impact supple-
Bag System, never install a rear-facing mental air bags and roof-mounted curtain
child restraint in the front seat. An in- side-impact and rollover supplemental air
flating front air bag could seriously in- bags:
jure or kill your child. For additional
● The side air bags and curtain air bags
information, refer to “Child restraints”
ordinarily will not inflate in the event of
in this section.
a frontal impact, rear impact, rollover, or
lower severity side collision. Always
wear your seat belts to help reduce the
risk or severity of injury in various kinds
of accidents.
WARNING
● The seat belts, the side air bags and
curtain air bags are most effective when
you are sitting well back and upright in
the seat with both feet on the floor. The
side air bag and curtain air bag inflate
with great force. Do not allow anyone to
place their hand, leg or face near the
side air bag on the side of the seatback
of the front seat or near the side roof
rails. Do not allow anyone sitting in the
front seats or rear outboard seats to
extend their hand out of the window or
lean against the door. Some examples WRS0032 SSS0162
of dangerous riding positions are
shown in the previous illustrations. WARNING
● When sitting in the rear seat, do not
hold onto the seatback of the front seat.
If the side air bag inflates, you may be
seriously injured. Be especially careful
with children, who should always be
properly restrained. Some examples of
dangerous riding positions are shown
in the illustrations.
● Do not use seat covers on the front
seatbacks. They may interfere with side
air bag inflation.
● Do not place heavy loads heavier than ● Confirm the operating condition with
2.2 lb (1 kg) on the seatback, head the front passenger air bag status light.
restraint/headrest or in the seatback
● If you notice that the front passenger air
pocket.
bag status light is not operating as de-
● Make sure that there is nothing press- scribed in this section, it is recom-
ing against the rear of the seatback, mended that you visit a NISSAN dealer
such as a child restraint installed in the for this service.
rear seat or an object stored on the
● Until you have confirmed with a dealer
floor.
that your passenger seat occupant clas-
● Make sure that there is no object placed sification system is working properly,
under the front passenger seat. position the occupants in the rear seat-
ing positions.
● Make sure that there is no object placed
SSS0159
between the seat cushion and center ● Do not position the front passenger
console or between the seat cushion seat so it contacts the rear seat. If the
and the door. front seat does contact the rear seat,
NISSAN Advanced Air Bag System the air bag system may determine a
(front seats) ● If a forward-facing child restraint is in-
sensor malfunction has occurred and
stalled in the front passenger seat, do
the front passenger air bag status light
WARNING not position the front passenger seat so
may illuminate and the supplemental
the child restraint contacts the instru-
To ensure proper operation of the passen- air bag warning light may flash.
ment panel. If the child restraint does
ger’s NISSAN Advanced Air Bag System, contact the instrument panel, the sys- This vehicle is equipped with the NISSAN Ad-
please observe the following items. tem may determine the seat is occupied vanced Air Bag System for the driver and front
● Do not allow a passenger in the rear and the passenger air bag may deploy passenger seats. This system is designed to
bench seats to push or pull on the seat- in a collision. Also the front passenger meet certification requirements under U.S. regu-
back pocket. air bag status light may not illuminate.
lations. It is also permitted in Canada. However,
For additional information about in-
all of the information, cautions and warn-
stalling and using child restraints, refer
to “Child restraints” in this section. ings in this manual still apply and must be
followed.
The driver supplemental front-impact air bag is passenger air bag and status light” in this section. help protect the front occupants. Because of this,
located in the center of the steering wheel. The One front air bag inflating does not indicate im- the force of the front air bag inflating can increase
front passenger supplemental front-impact air proper performance of the system. the risk of injury if the occupant is too close to, or
bag is mounted in the dashboard above the glove is against, the front air bag module during infla-
If you have any questions about your air bag tion.
box. The front air bags are designed to inflate in
system, it is recommended that you visit a
higher severity frontal collisions, although they The front air bags deflate quickly after a collision.
NISSAN dealer to obtain information about the
may inflate if the forces in another type of collision
system. If you are considering modification of The front air bags operate only when the
are similar to those of a higher severity frontal
your vehicle due to a disability, you may also ignition switch is in the ON position.
impact. They may not inflate in certain frontal contact NISSAN. Contact information is con-
collisions. Vehicle damage (or lack of it) is not tained in the front of this Owner’s Manual. After placing the ignition switch in the ON
always an indication of proper front air bag sys- position, the supplemental air bag warning
tem operation. When a front air bag inflates, a fairly loud noise light illuminates. The supplemental air bag
may be heard, followed by the release of smoke. warning light will turn off after about 7 sec-
The NISSAN Advanced Air Bag System monitors This smoke is not harmful and does not indicate a onds if the system is operational.
information from the crash zone sensor, the Air fire. Care should be taken to not inhale it, as it may
bag Control Unit (ACU), seat belt buckle sensors cause irritation and choking. Those with a history
and occupation classification sensor (weight of a breathing condition should get fresh air
sensor). Inflator operation is based on the sever- promptly.
ity of a collision and seat belt usage for the driver.
Front air bags, along with the use of seat belts,
For the front passenger, the occupant classifica-
help to cushion the impact force on the face and
tion sensor is also monitored. Based on informa-
chest of the front occupants. They can help save
tion from the sensor, only one front air bag may
lives and reduce serious injuries. However, an
inflate in a crash, depending on the crash severity
inflating front air bag may cause facial abrasions
and whether the front occupants are belted or
or other injuries. Front air bags do not provide
unbelted. Additionally, the front passenger air
restraint to the lower body.
bag may be automatically turned off under some
conditions, depending on the weight detected on Even with NISSAN Advanced Air Bags, seat
the front passenger seat and how the seat belt is belts should be correctly worn and the driver and
used. If the front passenger air bag is OFF, the front passenger seated upright as far as practical
front passenger air bag status light will be illumi- away from the steering wheel or instrument
nated. For additional information, refer to “Front panel. The front air bags inflate quickly in order to
Front passenger air bag and status light Status light
The front passenger seat is equipped with an
WARNING
occupant classification sensor (weight sensor)
The front passenger air bag is designed to that turns the front passenger air bag on or off
automatically turn OFF under some condi- depending on the weight applied to the front
tions. Read this section carefully to learn passenger seat. The status of the front passen-
how it operates. Proper use of the seat, ger air bag (ON or OFF) is indicated by the front
seat belt and child restraints is necessary
passenger air bag status light which is
for most effective protection. Failure to
located on the instrument panel.
follow all instructions in this manual con-
cerning the use of seats, seat belts and After the ignition switch is placed in the ⬙ON⬙
child restraints can increase the risk or position, the front passenger air bag status light
severity of injury in an accident. on the instrument panel illuminates for about
7 seconds and then turns off or remains illumi-
LRS0865 nated depending on the front passenger seat
occupied status. The light operates as follows:
PASSENGER AIR BAG
CONDITION DESCRIPTION FRONT PASSENGER AIR BAG STATUS
INDICATOR LIGHT ( )
Empty Empty front passenger seat ON (illuminated) INHIBITED
Bag or Child or Child Restraint or
Nobody/Somebody ON (illuminated) INHIBITED
Small Adult in front passenger seat
Adult Adult in the front passenger seat OFF (dark) ACTIVATED
In addition to the above, certain objects placed accordance with the regulations. Also, if a child OFF. For additional information about proper use
on the front passenger seat may also cause the restraint of the type specified in the regulations is and installation, refer to “Child restraints” in this
light to operate as described above depending on the seat, its weight and the child’s weight can section.
on their weight. be detected and cause the air bag to turn OFF.
If the front passenger seat is not occupied, the
For additional information related to the normal Front passenger seat adult occupants who are front passenger air bag is designed not to inflate
operation and troubleshooting of this occupant
properly seated and using the seat belt as out- in a crash. However, heavy objects placed on the
classification sensor system, please refer to
lined in this manual should not cause the front seat could result in air bag inflation, because of
“Normal operation” and “Troubleshooting” in this
passenger air bag to be automatically turned the object’s weight detected by the occupant
section.
OFF. For small adults it may be turned OFF, classification sensor. Other conditions could also
Front passenger air bag however if the occupant takes his/her weight off result in air bag inflation, such as if a child is
the seat cushion (for example, by not sitting up- standing on the seat, or if two children are on the
The front passenger air bag is designed to auto-
right, by sitting on an edge of the seat, or by seat, contrary to the instructions in this manual.
matically turn OFF when the vehicle is operated
otherwise being out of position), this could cause Always be sure that you and all vehicle occupants
under some conditions as described below in
the sensor to turn the air bag OFF. Always be are seated and restrained properly.
accordance with U.S. regulations. If the front
sure to be seated and wearing the seat belt
passenger air bag is OFF, it will not inflate in a Using the front passenger air bag status light, you
properly for the most effective protection by the
crash. The driver air bag and other air bags in your can monitor when the front passenger air bag is
seat belt and supplemental air bag.
vehicle are not part of this system. automatically turned OFF.
NISSAN recommends that pre-teens and chil-
The purpose of the regulation is to help reduce If an adult occupant is in the seat but the front
dren be properly restrained in a rear seat.
the risk of injury or death from an inflating air bag passenger air bag status light is illuminated (indi-
NISSAN also recommends that appropriate child
to certain front passenger seat occupants, such cating that the air bag is OFF), it could be that the
restraints and booster seats be properly installed
as children, by requiring the air bag to be auto- person is a small adult, or is not sitting on the seat
in a rear seat. If this is not possible, the occupant
matically turned OFF. Certain sensors are used to properly or not using the seat belt properly.
classification sensor is designed to operate as
meet the requirements.
described above to turn the front passenger air If a child restraint must be used in the front seat,
The occupant classification sensor in this vehicle bag OFF for specified child restraints as required the front passenger air bag status light may or
is a weight sensor. It is designed to detect an by the regulations. Failing to properly secure may not be illuminated, depending on the size of
occupant and objects on the seat by weight. For child restraints and to use the ALR mode may the child and the type of child restraint being
example, if a child is in the front passenger seat, allow the restraint to tip or move in a collision or used. If the air bag status light is not illuminated
the NISSAN Advanced Air Bag System is de- sudden stop. This can also result in the passen- (indicating that the air bag might inflate in a
signed to turn the front passenger air bag OFF in ger air bag inflating in a crash instead of being crash), it could be that the child restraint or seat
belt is not being used properly. Make sure that If a malfunction occurs in the front passenger air Steps
the child restraint is installed properly, the seat bag system, the supplemental air bag warning
belt is used properly and the occupant is posi- 1. Adjust the seat as outlined in the “Seats”
light , located in the meter and gauges area section of this manual. Sit upright, leaning
tioned properly. If the air bag status light is still not of the instrument panel, will be illuminated (blink-
illuminated, reposition the occupant or child re- against the seatback, and centered on the
ing or steadily lit). Have the system checked. It is seat cushion with your feet comfortably ex-
straint in a rear seat. recommended that you visit a NISSAN dealer for tended to the floor.
If the front passenger air bag status light will not this service.
illuminate even though you believe that the child 2. Make sure there are no objects on your lap.
Normal operation
restraint, the seat belts and the occupant are 3. Fasten the seat belt as outlined in the “Seat
properly positioned, it is recommended that you In order for the occupant classification sensor
system to classify the front passenger based on belts” section of this manual. Front passen-
take your vehicle to a NISSAN dealer. A NISSAN
weight, please follow the precautions and steps ger seat belt buckle status is monitored by
dealer can check system status by using a spe-
cial tool. However, until you have confirmed with outlined below: the occupant classification system, and is
a dealer that your air bag is working properly, used as an input to determine occupancy
Precautions status. So, it is highly recommended that the
reposition the occupant or child restraint in a rear
seat. ● Make sure that there are no objects weigh- front passenger fasten their seat belt.
ing over 2.2 lbs (1 kg) hanging on the seat or
The NISSAN Advanced Air Bag System and front 4. Remain in this position for 30 seconds al-
placed in the seatback pocket.
passenger air bag status light will take a few lowing the system to classify the front pas-
seconds to register a change in the front passen- ● Make sure that a child restraint or other senger before the vehicle is put into motion.
ger seat status. For example, if a large adult who object is not pressing against the rear of the
seatback. 5. Ensure proper classification by checking the
is sitting in the front passenger seat exits the
front passenger air bag status light.
vehicle, the front passenger air bag status light ● Make sure that a rear passenger is not push-
will go from OFF to ON for a few seconds and ing or pulling on the back of the front pas-
then to OFF. This is normal system operation and senger seat.
does not indicate a malfunction.
● Make sure that the front passenger seat or
seatback is not forced back against an ob-
ject on the seat or floor behind it.
● Make sure that there is no object placed
under the front passenger seat.
NOTE: ● A child restraint or other object pressing 2. If the light is OFF with a small adult, child or
against the rear of the seatback. child restraint occupying the front passen-
This vehicle’s occupant classification sen-
ger seat.
sor system generally keeps the classifica- ● A rear passenger pushing or pulling on the
tion locked during driving, so it is important back of the front passenger seat. This may be due to the following conditions
that you confirm that the front passenger is that may be interfering with the weight sen-
● Forcing the front seat or seatback against an
properly classified prior to driving. How- sors:
object on the seat or floor behind it.
ever, the occupant classification sensor
● Small adult or child is not sitting upright,
may recalculate the weight of the occupant ● An object placed under the front passenger
leaning against the seatback, and centered
under some conditions (both while driving seat.
on the seat cushion with his/her feet com-
and when stopped), so front passenger
● An object placed between the seat cushion fortably extended to the floor.
seat occupants should continue to remain
and center console or between the seat
seated as outlined above. ● The child restraint is not properly installed,
cushion and the door.
as outlined in the “Child restraints” section of
Troubleshooting
If the vehicle is moving, please come to a stop this manual.
If you think the front passenger air bag status light when it is safe to do so. Check and correct any of
● An object weighing over 2.2 lbs (1 kg) hang-
is incorrect: the above conditions. Restart the vehicle and
ing on the seat or placed in the seatback
wait 1 minute. pocket.
1. If the light is ON with an adult occupying the
front passenger seat:
NOTE: ● A child restraint or other object pressing
● Occupant is a small adult — the air bag light against the rear of the seatback.
is functioning as intended. The front passen- A system check will be performed during
which the front passenger air bag status ● A rear passenger pushing or pulling on the
ger air bag is suppressed.
light will remain lit for about 7 seconds back of the front passenger seat.
However, if the occupant is not a small adult, then initially. ● Forcing the front seat or seatback against an
this may be due to the following conditions that
If the light is still ON after this, the person should object on the seat or floor behind it.
may be interfering with the weight sensors:
be advised not to ride in the front passenger seat ● An object placed under the front passenger
● Occupant is not sitting upright, leaning and the vehicle should be checked as soon as seat.
against the seatback, and centered on the possible. It is recommended that you visit a
seat cushion with his/her feet comfortably ● An object placed between the seat cushion
NISSAN dealer for this service.
extended to the floor. and center console.
If the vehicle is moving, please come to a stop Other supplemental front-impact air bag ● Tampering with the front air bag system
when it is safe to do so. Check and correct any of precautions may result in serious personal injury.
the above conditions. Restart the vehicle and Tampering includes changes to the
wait 1 minute. WARNING steering wheel and the instrument
● Do not place any objects on the steering panel assembly by placing material
NOTE: over the steering wheel pad and above
wheel pad or on the instrument panel.
A system check will be performed during Also, do not place any objects between the instrument panel or by installing
which the front passenger air bag status any occupant and the steering wheel or additional trim material around the air
instrument panel. Such objects may be- bag system.
light will remain lit for about 7 seconds
initially. come dangerous projectiles and cause ● Removing or modifying the front pas-
injury if the front air bags inflate. senger seat may affect the function of
If the light is still OFF after this, the small adult, the air bag system and result in serious
child or child restraint should be repositioned in ● Immediately after inflation, several
front air bag system components will be personal injury.
the rear seat and the vehicle should be checked
hot. Do not touch them; you may se- ● Modifying or tampering with the front
as soon as possible. It is recommended that you
verely burn yourself. passenger seat may result in serious
visit a NISSAN dealer for this service.
● No unauthorized changes should be personal injury. For example, do not
3. If the light is OFF with no front passenger made to any components or wiring of change the front seats by placing mate-
and no objects on the front passenger seat, the supplemental air bag system. This is rial on the seat cushion or by installing
the vehicle should be checked. It is recom- to prevent accidental inflation of the additional trim material, such as seat
mended that you visit a NISSAN dealer as supplemental air bag or damage to the covers, on the seat that are not specifi-
soon as possible. supplemental air bag system. cally designed to assure proper air bag
operation. Additionally, do not stow any
● Do not make unauthorized changes to objects under the front passenger seat
your vehicle’s electrical system, sus- or the seat cushion and seatback. Such
pension system or front end structure. objects may interfere with the proper
This could affect proper operation of operation of the occupant classification
the front air bag system. sensor (weight sensor).
● No unauthorized changes should be
made to any components or wiring of
the seat belt system. This may affect the
front air bag system. Tampering with
the seat belt system may result in seri-
ous personal injury.
● It is recommended that you visit a
NISSAN dealer for work on and around
the front air bag. It is also recom-
mended that you visit a NISSAN dealer
for installation of electrical equipment.
The Supplemental Restraint System
(SRS) wiring harnesses should not be
modified or disconnected. Unauthor-
ized electrical test equipment and prob-
ing devices should not be used on the
air bag system.
● A cracked windshield should be re-
placed immediately by a qualified repair
facility. A cracked windshield could af-
fect the function of the supplemental air
bag system.