Professional Documents
Culture Documents
4
Chapter
A
sus F7SR Series Notebook is a 2 spindles product. The key upgradeable and replaceable items
include the memory module, HDD module, and Wireless LAN module.
In order to avoid redundancy, please refer to chapters 2 and 3 of this manual for repeated and
reused disassembly and assembly procedures, such as keyboard & heat sink replacement, which is used
by several different procedures in this chapter. Be sure to follow the safety instructions described in
Chapter 1 to safeguard the notebook against any potential damages. For any other components
which you need to replace not covered in this chapter, please refer to Chapters 2 and 3 for detailed
disassembly and assembly and perform necessary procedures accordingly.
• CPU Upgrade
• MEMEORY Upgrade
• WLAN Upgrade
• HDD Upgrade
• ODD Upgrade
4–1
Upgrade & Replacement
C P U CPU Upgrade
The F7SR Series Notebook comes standard with an Intel μFC-PGA Socket on the
motherboard, which means it can support all a Intel μFC-PGA CPUs up to 2.16 GHz.
Upgrading CPU
Remove battery module
1. Turn the notebook over. Unlock and hold the latch, and remove the battery.
Replacement CPU
1. Remove 7(M2*4L) screws, and then remove the CPU cover.
M2*4L
4-2
Upgrade & Replacement
M2*6L
4-3
Upgrade & Replacement
M2*4L
6. Turn the non-removable screw here 180 degrees counter-clockwise to loosen the CPU.
7. Squeeze the vacuum handling pump on the CPU and use it to lift the CPU away.
4-4
Upgrade & Replacement
1. Use the CPU vacuum to “suck up” the CPU then Install the CPU and turn the non-
removable screw here 180 degrees clockwise to lock the CPU.
2. Install the CPU heat sink module gently and secure 3 (M2*4L) screws upon the CPU
module.
Note: If thermal module has no thermal pad on it, please plus a thermal pad on the CPU die before assembling.
M2*4L
4-5
Upgrade & Replacement
3. Install CPU fan and secure 6 (M2*6L) screws, and then connect fan cable.
M2*6L
4-6
Upgrade & Replacement
M2*4L
Slide on the battery module into its compartment and then lock the latch to fix it.
4-7
Upgrade & Replacement
M E M O R Y Memory Upgrade
The F7SR Series Notebook has onboard RAM. There is two SO-DIMM socket for installing
SO-DIMM RAM. It can upgrade the total memory size up to 4GB.
4-8
Upgrade & Replacement
M2*4L
2. Pop the module up to 45° angles, and then pulling out the module in that angle.
4-9
Upgrade & Replacement
M2*4L
4 - 10
Upgrade & Replacement
M2*4L
3. Remove one piece of tape here and disconnect the 3 antennas. Then remove 2 (M2*3L) screws here
and pop the module up to a 45° angles, and then pulling out the module in that angle.
4 - 11
Upgrade & Replacement
M2*3
M2*3
4 - 12
Upgrade & Replacement
2. Put the CPU door on and secure 7 (M2*4L) screws to fix it.
M2*4L
4 - 13
Upgrade & Replacement
H D D HDD Upgrade
TheF7SR Series Notebook uses an industry-standard 2½” HDD with IDE interface. You
can replace the HDD to any capacity of your choice within our approval and prior test.
1. Press latch to open the battery module, then lift battery module away from the system.
H D D
Removing HDD Module
M O D U L E
1. Remove 2 (M2*6L) screws , then remove the HDD door.
R E M O V A L
4 - 14
Upgrade & Replacement
M2*6
2. Lift the hard disk module and take away the hard disk module.
4 - 15
Upgrade & Replacement
M2*6
Replacing ODD
4 - 16
Upgrade & Replacement
M2*6
4 - 17
Upgrade & Replacement
M2*6
4 - 18