This document contains information about an unbalanced case study, including machine specifications, component details, bearing specifications, speeds, and vibration spectra. It provides the motor and gearbox specifications, including speeds of components. Charts show the vibration spectrum at the gearbox output before and after corrections were made, demonstrating reductions in vibration levels after adjustments.
This document contains information about an unbalanced case study, including machine specifications, component details, bearing specifications, speeds, and vibration spectra. It provides the motor and gearbox specifications, including speeds of components. Charts show the vibration spectrum at the gearbox output before and after corrections were made, demonstrating reductions in vibration levels after adjustments.
This document contains information about an unbalanced case study, including machine specifications, component details, bearing specifications, speeds, and vibration spectra. It provides the motor and gearbox specifications, including speeds of components. Charts show the vibration spectrum at the gearbox output before and after corrections were made, demonstrating reductions in vibration levels after adjustments.
G.box.I/P-V MNDS-V MDS-V G.box.I/P-H MNDS-H MDS-H G.box.I/P- Axl MDS-Axl
G.box.O/P
Advanced Consulting for Technologies
Machine Information
Motor Speed : 1485 rp.m
Motor Power : 26.6 Kw Motor Rotor Bars : N/A Motor bearings :NSK 6312 Motor bearing defect frequencies Bearing Drawing
Inner ring defect frequency (Hz) : 121.12
Outer ring defect frequency (Hz) : 75.20 Rolling element defect frequency (Hz) : 99.18 Inner ring rotational speed (Hz) : 24.54 Cage rotational speed (Hz) : 9.40 Rolling element rotational speed (Hz) : 49.59 Deep groove
Advanced Consulting for Technologies
Machine Information Cont.
Gear Box ratio : 4.11
Fan O/P Shaft Speed : 6 Hz (360 r.p.m) Pinion gear : 9 teeth Driven gear : 37 teeth Fan speed : 360 r.p.m Number of blades : 9 G.box I/P first Bearing : Timken 30208 (near coupling): G.box I/P Second gear : Timken 30209 Output shaft bearings : Timken 32212 Above (near fan) Output shaft bearings : Timken 32212 below Advanced Consulting for Technologies Spectrum at Gearbox Output Before Correction
Advanced Consulting for Technologies
Photoelectric probe & accelerometer location
Advanced Consulting for Technologies
Spectrum at Gearbox Output After Correction
Advanced Consulting for Technologies
Spectrum at Gearbox Output Before & After Correction