Customer Name & Address : ULR No. : TC801321000000232P
Sample Identification : Ordinary Portland Cement 53 Grade (As per IS 269:2015) Date of Issue : 29.01.2022
Sample Date : 24.12.2021 to 31.12.2021 (WEEK NO. – 52) Date of Testing : 01.01.2022
Sr. Requirement of Results
Particulars Test Method No. IS:269 Obtained Chemical Requirements Ratio of Percentage of Lime to percentage of silica, alumina and iron oxide Not greater than 1.02 1 CaO – 0.7SO3 IS : 4032 - 1985 And not less than 0.862 --------------------------------------------------- 0.80 2.8 SiO2 + 1.2 Al 2O3 + 0.65 Fe 2O3 Ratio of percentage of alumina to that 2 IS : 4032 - 1985 Not less than 0.66 1.38 of iron oxide 3 Insoluble residue(% by mass) IS : 4032 - 1985 Not more than 5.0 1.81 4 Magnesia(% by mass) IS : 4032 - 1985 Not more than 6.0 3.44 Total sulphur calculated as Sulphuric 5 IS : 4032 - 1985 Not more than 3.5 2.47 Anhydride (SO3) (% by mass) 6 Total loss on ignition (% by mass) IS : 4032 - 1985 Not more than 4.0 1.73 7 Chloride(% by mass)* IS : 4032 - 1985 Not more than 0.1 0.017 Mechanical Requirements IS : 4031 1 Fineness (m2/kg) Not less than 225 328 (Part-2) - 1999 IS : 4031 2 Normal Consistency (%) - 27.25 (Part-4) - 1988 Soundness : IS : 4031 3 a) Le-chateliere expansion (mm) Not more than 10 1.0 (Part-3) - 1988 b) Autoclave test expansion (%) Not more than 0.8 0.104 Setting Time : IS : 4031 4 a) Initial setting time (Minutes) Not less than 30 125 (Part-5) - 1988 b) Final setting time (Minutes) Not more than 600 180 Compressive Strength : a) 72 ± 1 Hours (3 Days) (MPa) IS : 4031 Not less than 27 38.0 5 b) 168 ± 2 Hours (7 Days)(MPa) (Part-6) - 1988 Not less than 37 47.7 c) 672 ± 4 Hours (28 Days)(MPa) Not less than 53 59.7 Remarks: a) The above test results relate only to the sample tested. b) * Not covered under NABL Accreditation at present.
Reviewed by: Ramesh Kumar Page 1 of 1 Authorized Signatory: Rizvan Alad
Employee Code: 189733 ***End of Report*** Employee Code: 129271