Professional Documents
Culture Documents
: Date:
1 Input data
Anchor type and diameter: Effective embedment depth: Material: Evaluation Service Report:: Issued I Valid: Proof: Stand-off installation: Anchor plate: Profile: Base material: Installation: Reinforcement: HIT-RE 500-SD + HIT-V-HCR M16 hef,opti = 292 mm (hef,limit = 320 mm) HCR ETA 07/0260 11/3/2008 | 11/8/2012 design method ETAG BOND; EOTA TR 029 without clamping (anchor); restraint level (anchor plate): 2.0; eb = 25 mm; t = 10 mm Hilti Grout: , precision, fc,Grout = 30.00 N/mm2 lx x ly x t = 250 mm x 225 mm x 10 mm; (Recommended plate thickness: not calculated) Advance UKC; (L x W x T x FT) = 152 mm x 152 mm x 7 mm x 7 mm cracked concrete, C40/50, fcc = 50.00 N/mm2; h = 10000 mm, Temp. short/long: 0/0 C hammer drilled hole, installation condition: dry no reinforcement or reinforcement spacing >= 150 mm (any ) or >= 100 mm ( <= 10 mm) with longitudinal edge reinforcement d >= 12 Reinforcement to control splitting according to EOTA TR 029, 5.2.2.6 present. Geometry [mm] & Loading [kN, kNm]
3 Warnings
Please consider all details and hints/warnings given in the detailed report!
Input data and results must be checked for agreement with the existing conditions and for plausibility! PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
www.hilti.co.uk Company: Specifier: Address: Phone I Fax: E-Mail: Page: Project: Sub-Project I Pos. No.: Date:
Input data and results must be checked for agreement with the existing conditions and for plausibility! PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan