Professional Documents
Culture Documents
®
ORBIT
PROCESS VALVES
TABLE OF CONTENTS
ABOUT Orbit
Accreditations and approvals 1
Design and manufacturing 2
Quality Assurance 3
Orbit valve operating principle 4&5
Orbit valve product range and options 6
TRADEMARK INFORMATION 7
® BR-ORB-BOOK1
ORBIT 07/06 NP-2M
PROCESS VALVES
ACCREDITATIONS
AND
APPROVALS
ORBIT
® BR-ORB-BOOK1
07/06 NP-2M 1
PROCESS VALVES
ORBIT VALVES ARE WITHOUT EQUAL WHEN ZERO LEAKAGE AND FREQUENT OPERATION ARE DEMANDED.
THRUST BEARINGS
TOP ENTRY
FIRE SAFE PACKING
STATIONARY SEAT
2 ORBIT
® BR-ORB-BOOK1
07/06 NP-2M
PROCESS VALVES
QUALITY ASSURANCE
Cameron, Valves & Measurement’s Little Cameron, Valves & Measurement
Rock manufacturing facility has quality Six Sigma lean manufacturing philosophy
programs that are ISO 9001 registered. and the standard 36 month warranty,
assures that the design, materials and
SPECIFICATIONS AND COMPLIANCES:
workmanship of all Orbit products result
• API 6D in years of dependable operation.
• ISO 9001:2000 Every Orbit valve built is individually
• PED (Pressure Equipment Directive) pressure tested to meet or exceed
97/23/EC industry standards.
• ATEX Directive 94/9/EC Certifications for hydrostatic test results
and material properties are provided
• GOST (Russian Certificates)
when requested.
• GOST R & GOST GGTN
ORBIT
® BR-ORB-BOOK1
07/06 NP-2M 3
PROCESS VALVES
OPERATING PRINCIPLE
Orbit valves are ideal where frequent cycling and a positive shut off are required.
4 ORBIT
® BR-ORB-BOOK1
07/06 NP-2M
PROCESS VALVES
OPERATING PRINCIPLE
ORBIT
® BR-ORB-BOOK1
07/06 NP-2M 5
PROCESS VALVES
6 ORBIT
® BR-ORB-BOOK1
07/06 NP-2M
PROCESS VALVES
TRADEMARK INFORMATION
References in this catalog to registered trademarks or product designations, which are owned by
Cameron are as follows:
CAMERON®
CONTROL SEAL®
DEMCO®
DUAL SEAL®
DYNACENTRIC®
DYNASEAL®
ENTECH™
FOSTER®
GENERAL VALVE®
GROVE®
LEDEEN™
NAVCO®
NUTRON®
ORBIT®
POW-R-SEAL®
RING-O®
SAF-T-SEAL®
TBV™
TECHNO™
TEXSTEAM™
THORNHILL CRAVER®
TK®
TOM WHEATLEY™
TRUSEAL®
UNIBOLT®
VALVSERV™
WHEATLEY®
WKM®
ORBIT
® BR-ORB-BOOK1
07/06 NP-2M 7
PROCESS VALVES
All sales are subject to Cameron, Valves & Measurement Terms and Conditions in effect at the time of
the sale.
These Term’s and Condition’s are available by mail, fax, or email upon request from
Cameron, Valves & Measurement division headquarters in Houston, Texas.
Requests can be sent via
Mail to:
Cameron Valves
3250 Briarpark Drive
Suite 300
Houston, Texas 77042
8 ORBIT
® BR-ORB-BOOK1
07/06 NP-2M
PROCESS VALVES
PROCESS VALVES
For the most current contact and location information go to: www.c-a-m.com