Professional Documents
Culture Documents
Since 1959, Allied Tube & Conduit® has been reshaping the pipe
and tube industry. The company began with a small 24,000 square
foot facility, an innovative idea to galvanize EMT conduit while still
“in line”, one tube mill, and 10 employees. The tubing industry was
changed forever and Allied Tube & Conduit® was positioned for
growth and expansion.
Introduction
Today, Allied Tube & Conduit® is stronger than ever and now is
a part of Atkore International. Atkore International has a global
manufacturing footprint with service to customers all over the
globe. From construction to manufacturing, our products are hard
at work in the center of it all. Atkore International strives to be core
to each customer’s business as well, understanding what they value
and need, and providing essential solutions that improve their day-
to-day operations.
Visit www.kwikcalculator.com to estimate your Material and Labor Savings by using Kwik-Fit® products.
Table of Contents
Intermediate Metal Conduit.......................................................................................................................................................................8 - 10
Super Kwik-Couple™ IMC............................................................................................................................................................................8 - 10
GRC • Galvanized Rigid Conduit...................................................................................................................... 11 - 12
Galvanized Rigid Conduit .......................................................................................................................................................................11 - 12
Super Kwik-Couple™ GRC.......................................................................................................................................................................11 - 12
ECN • Elbows, Couplings & Nipples...............................................................................................................13 - 24
Electrical Metallic Tubing (EMT) Elbows.....................................................................................................................................15 - 17
90° Elbows..................................................................................................................................................................................................................15
45° Elbows ................................................................................................................................................................................................................15
Large Radius 90° Elbows...............................................................................................................................................................................16
Large Radius 45° Elbows...............................................................................................................................................................................17
Galvanized Rigid Conduit (GRC) Couplings & Elbows................................................................................................18 - 20
Couplings......................................................................................................................................................................................................................18
Super Kwik Coupling®........................................................................................................................................................................................18
90º Elbows..................................................................................................................................................................................................................18
90º Super Kwik-Couple™ Elbow................................................................................................................................................................19
45º Elbows..................................................................................................................................................................................................................19
Large Radius 90° Elbows...................................................................................................................................................................20 - 21
Large Radius 45° Elbows...................................................................................................................................................................21 - 22
Galvanized Rigid Conduit Nipples....................................................................................................................................................22 - 24
ARC • Aluminum Rigid Conduit.........................................................................................................................25 - 26
Aluminum Rigid Conduit.................................................................................................................................................................................25
Couplings.....................................................................................................................................................................................................................26
90º Elbows.................................................................................................................................................................................................................26
45º Elbows.................................................................................................................................................................................................................26
Rigid PVC Conduit & Fittings.............................................................................................................................. 27 - 59
Schedule 40...............................................................................................................................................................................................................28
Schedule 80...............................................................................................................................................................................................................29
Utility Duct...................................................................................................................................................................................................... 30 - 31
PVC Pipe Truck Loading Chart...................................................................................................................................................................32
Standard Radius Elbows ........................................................................................................................................................................ 33 - 36
Schedule 40 - Standard Radius Elbows (Plain End)...............................................................................................................33
Schedule 40 - Standard Radius Elbows (Belled End)............................................................................................................34
Schedule 80 - Standard Radius Elbows (Plain End)...............................................................................................................35
Schedule 80 - Standard Radius Elbows (Belled End)............................................................................................................36
Special Radius Elbows ............................................................................................................................................................................ 37 - 40
Schedule 40 - Special Radius Elbows (Plain End)....................................................................................................................37
wire-pulling
• Excellent mechanical protection for conductors
• Ductility for faster and easier bending
• Optimal EMI shielding characteristics
• Listed to Underwriters Laboratories Safety Standard UL 797
• Manufactured in accordance with ANSI C80.3
• Available in sizes 1⁄2 (16) - 4 (103)
Kwik-Fit® EMT
Listed to Underwriters Laboratories Safety Standard UL 797
Manufactured in accordance with ANSI C80.3
Metric Outside Nominal Wall Approximate Weight Per Master Bundle
Trade Size
Designator Diameter1 Thickness 100 Ft. (30.5M) Quantity
in. mm. in. mm. lb. kg. ft. m.
1 1⁄4 35 1.510 38.35 0.065 1.65 101 45.8 840 256.0
1 1⁄2 41 1.740 44.20 0.065 1.65 116 52.6 720 219.5
2 53 2.197 55.80 0.065 1.65 148 67.1 500 152.4
2 1⁄2 63 2.875 73.03 0.072 1.83 216 98.0 350 106.7
3 78 3.500 88.90 0.072 1.83 263 119.3 300 91.4
• Light-weight ductile steel conduit for long life and easy bending
• Weighs 1⁄3 less than rigid conduit
• Saves up to 30% in cost over GRC
• Hot galvanized exterior to increase corrosion resistance and protect
against white rust
• Interior coating creates a smooth, continuous raceway for
fast wire-pulling
• Listed to UL Safety Standard 1242 and manufactured in accordance
with ANSI C80.6
• True Color™ IMC special orders available
• Available in trade sizes 1⁄2 (16) thru 4 (103)
and is not approved for Class 1 Division 1 locations IMC to RIGID Conduit
IMC to EMT
Metric Average Outside Average Wall Approximate Weight Per Master Bundle
Trade Size
Designator Diameter1 Thickness2 100 Ft. (30.5M) Quantity
in. mm. in. mm. lb. kg. ft. m.
1
⁄2 16 0.815 20.70 0.070 1.79 62 28.1 3500 1067.5
3
⁄4 21 1.029 26.13 0.075 1.90 84 38.1 2500 762.5
1 27 1.290 32.76 0.085 2.16 119 54.0 1700 518.5
1 1⁄4 35 1.638 41.60 0.085 2.16 158 71.7 1350 411.8
1 1⁄2 41 1.883 47.82 0.090 2.29 194 88.0 1100 335.5
2 53 2.360 59.94 0.095 2.41 256 116.1 800 244.0
2 1⁄2 63 2.857 72.56 0.140 3.56 441 200.0 370 112.9
3 78 3.476 88.29 0.140 3.56 543 246.3 300 91.5
3 1⁄2 91 3.971 100.86 0.140 3.56 629 285.3 240 73.2
4 103 4.466 113.43 0.140 3.56 700 317.5 240 73.2
1
Outside diameter tolerances: Wall thickness tolerances:
2
/- .005 in. (.13mm) for trade sizes 1⁄2 (16mm) through 1 (25mm)
+ + 0.15 in. (.38mm) and - .000 for trade sizes 1⁄2 (13mm) through 2 (53mm)
+/- .0075 in. (.19mm) for trade sizes 1 1⁄4 (36mm) through 2 (53mm) + 0.20 in. (.51mm) and - .000 for trade sizes 2 1⁄2 (63mm) through 4 (103mm).
+/- 0.10 in. (.25mm) for trade sizes 2 1⁄2 (63mm) through 4 (103mm). NOTE: Length = 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35mm). NEMA Standard
+/- .0075 in. (.19mm) for trade sizes 1 1⁄4 (36mm) through 2 (53mm) + 0.20 in. (.51mm) and - .000 for trade sizes 2 1⁄2 (63mm) through 4 (103mm)
+/- 0.10 in. (.25mm) for trade sizes 2 1⁄2 (63mm) through 4 (103mm) NOTE: Length = 10 ft. (3.05m) with a tolerance of +/- .25 in. (6.35mm)
Super Kwik-Couple™ GRC Conduit (SKC) Quality, Long Lasting Heavy Duty Steel Conduit
• Similar benefits of GRC conduit
• High grade durable and ductile steel for long life
• Corrosion resistant exterior and interior finishes
• Super Kwik-Couple™ GRC is listed to UL safety standards 6 & 514B and
manufactured in accordance with ANSI C80.1.
• Eliminates field threading - Factory installed patented Super
Kwik-Couple™ connects to both threaded and unthreaded material
• Connect GRC to GRC, IMC, or EMT
• Reduces Material Cost- no separate couplings to purchase, store, carry,
or install For Faster Installations Use the Super Kwik-
• Reduces labor cost- quick and easy installations Couple™ GRC Connection
• Compact design allows for easier installation in tight spaces
• Super Kwik-Couple™ coupling can be easily removed from the conduit
and reinstalled in seconds using standard tongue and groove pliers or a
strap wrench GRC to IMC Conduit
• Available in sizes 2 1⁄2 “- 4”
** Super Kwik-Couple™ GRC does not contain a listing for wet locations and is not approved
for Class 1 Division 1 locations
GRC to EMT
* U.S. Patent Number: 8,586,881
facilitate bending. of Rigid Metal Conduit shall be in accordance with the National
Electrical Code® (NEC)® and UL General Information card #DYIX.
Color-coded end cap thread protectors keep the threads clean, sharp Master bundles conform to NEMA standard RN2.
and also provide instant trade size recognition. Even sizes are color-
coded blue, 1⁄2 sizes black, and 1⁄4 sizes red.
Specification Data
Coatings To specify, Super Kwik-Couple™ GRC Conduit include the following:
Conduit: Hot-dip galvanized inside and out providing galvanic GRC Conduit shall be hot-dip galvanized and manufactured by
corrosion protection. In addition, top coated with a compatible Allied Tube & Conduit®. Threads shall be hot galvanized after
organic layer to protect against white rust. The inside surface is evenly cutting. GRC conduit shall be listed to UL Safety Standard 6 by a
coated for wire-pulling ease, even through multiple 90° bends. nationally-recognized testing laboratory with follow up service. It
shall be manufactured in accordance with ANSI C80.1.
Coupling: Electro-galvanized inside and out to provide galvanic
corrosion protection. Super Kwik-Couple™ GRC conduit shall be listed to UL 6 and UL
514B and manufactured in accordance with ANSI C80.1.
EMI Shielding
Allied® GRC Conduit is effective in reducing the effects of Note: Federal specification WW-C-581, Class 1, Type
electromagnetic field levels for encased power distribution circuits, A has been superseded by UL Standard 6, which has
shielding computers and other sensitive electronic equipment from been adopted by the Federal Government.
the effects of electromagnetic interference. Obtain information about
the GEMI (Grounding and Electro-Magnetic Interference) software SUPER KWIK-COUPLE™ GRC AVAILABLE
analysis program. Trade Size 2 1⁄2 to 4
offers exceptional durability and long-lasting life. UL 797 and is manufactured in accordance with ANSI C80.3.
These standards have been adopted as federal specifications in
Color-coded end cap thread protectors keep the threads clean, sharp lieu of WWC 563. EMT is recognized as an equipment grounding
and also provide instant trade size recognition. Even sizes are color- conductor by NEC Section 250-118.
coded blue, 1⁄2 sizes black, and 1⁄4 sizes red.
Allied® GRC Conduit is precision manufactured for dependable,
Coatings long-lasting value and ultimate protection for electrical conductors.
EMT: Special low friction ID coating called E-Z Pull® that greatly Covered by Article 344 of the National Electrical Code® (NEC)®,
improves the slip properties between conduit and wire. With E-Z GRC conduit is highly resistant to damage from impact. GRC
Pull® EMT, wire pulls through the EMT smoothly and easily, making conduit is recognized as an equipment grounding conductor in
installation easier and faster Section 250.118 of the NEC®. GRC is listed to UL Safety Standard 6.
GRC: Hot-dip galvanized inside and out providing galvanic corrosion Specification Data
protection. In addition, top coated with a compatible organic layer to To specify Allied® EMT Elbows, include the following: Electrical
protect against white rust. The inside surface is evenly coated for wire- Metallic Tubing shall be equal to that manufactured by Allied Tube
pulling ease, even through multiple 90° bends. & Conduit®. EMT shall be hot galvanized steel O.D. with an organic
corrosion resistant I.D. coating, and shall be listed to UL Safety
Coupling: Electro-galvanized inside and out to provide galvanic Standard 797 and manufactured in accordance with ANSI C80.3.
corrosion protection.
To specify, GRC Elbows include the following: GRC Conduit shall be
EMI Shielding hot-dip galvanized and manufactured by Allied Tube & Conduit®.
Allied® GRC Conduit is extremely effective in reducing the effects of GRC conduit shall be listed to UL Safety Standard 6 by a nationally-
electromagnetic field levels for encased power distribution circuits, recognized testing laboratory with follow up service. It shall be
shielding computers and other sensitive electronic equipment from manufactured in accordance with ANSI C80.1.
the effects of electromagnetic interference. Obtain information about
the GEMI (Grounding and Electro-Magnetic Interference) software
analysis program. Note: Federal specification WW-C-581, Class 1, Type A
has been superseded by UL Standard 6, which has been
adopted by the Federal Government.
Allied Tube & Conduit® Catalog
3
⁄4 21 4 1⁄2 114 7 178 1 1⁄2 38 46 20.9 50
1 27 5 3⁄4 146 8 3⁄4 222 1 7⁄8 48 84 38.1 25 A
1 1⁄4 35 7 1⁄4 184 10 1⁄8 257 2 51 144 65.3 20 D
XXXXXX
AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
OR DUPLICATION THEREOF XXXX
DESCRIPTION:
XXXXXX
EXCEPT AS AUTHORIZED BY
COPE AND TO RETURN THIS DATE:
A XXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE SCALE:
REFERENCE ONLY 1:4 WEIG
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
3 PLACE 0.XXX = ±0.005 AFFILIATES. ANY PERSON
DEG X° = ±2 ACCEPTING THIS SHEET
DATE:
MANUFACTURING AND QUALITY CONTROL DR
FRACTIONAL X/X = ±1/32 AND/OR INFORMATION AGREES XXXX DESCRIPTION:
MATERIAL: TO MAKE NO DISCLOSURE, USE APPROVED:
XXXXXX OR DUPLICATION THEREOF XXXX XXXXXX
EXCEPT AS AUTHORIZED BY
COPE AND TO RETURN THIS DATE:
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4 WEIGHT: XX lbs SHEET
A XX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4
2 1⁄2 63 36 914 46 3⁄4 1187 10 3⁄4 273 1404 636.9 OTHERWISE NOTED:
2 PLACE 0.XX = ±0.015
3 PLACE 0.XXX = ±0.005
CONFIDENTIAL, PROPRIETARY DRAWN:
INFORMATION OF COPE AND ITS XXXX
AFFILIATES. ANY PERSON
DEG X° = ±2 ACCEPTING THIS SHEET
DATE:
MANUFACTURING AND Q
2 1⁄2 63 48 1219 60 1⁄4 1530 12 1⁄4 311 1800 816.5 C FRACTIONAL X/X = ±1/32
MATERIAL:
XXXXXX
AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
OR DUPLICATION THEREOF XXXX
DESCRIPTION:
XXXXXX
3 78 24 610 34 5⁄8 879 10 5⁄8 270 1293 586.5
EXCEPT AS AUTHORIZED BY
COPE AND TO RETURN THIS DATE:
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
3 1⁄2 91 24 610 34 5⁄8 879 10 5⁄8 270 1716 778.4 SHEET ON REQUEST. XXXX
SIZE: PART NUMBER: REV
A XXXXX A
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT.
DATE:
XXXX
SIZE: PART NUMBER:
Threads
Trade Metric Approximate Weight Standard B
Nominal O.D. (A)2 Length (B)1 Per
Size Designator Per 100 Pieces Package
Inch1
in. mm. in. mm. lb. kg.
⁄2
1
16 1.01 25.7 1 5⁄8 41.3 14 12 5.4 100
3
⁄4 21 1.25 31.8 1 41⁄64 41.7 14 18 8.2 50
A
1 27 1.53 38.7 1 31⁄32 50.0 11 1⁄2 30 13.6 30
1 1⁄4 35 1.87 47.5 2 1⁄32 51.6 11 1⁄2 37 16.8 25
1 1⁄2 41 2.16 54.7 2 1⁄16 52.4 11 1⁄2 52 23.6 25
2 53 2.65 67.3 2 1⁄8 54.0 11 1⁄2 72 32.7 20
2 1⁄2 63 3.25 82.6 3 3⁄16 81.0 8 170 77.1 1
3 78 3.87 98.3 3 5⁄16 84.1 8 210 95.3 1
3 1⁄2 91 4.50 114.3 3 13⁄32 86.5 8 340 154.2 1
4 103 4.88 123.8 3 33⁄64 89.3 8 300 136.1 1
5 129 6.00 152.4 3 61⁄64 100.4 8 475 215.5 1
TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
3 PLACE 0.XXX = ±0.005 AFFILIATES. ANY PERSON
A XXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT.
Super Kwik-Coupling ®
DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:2 W
4 103 16 406 23 7⁄8 606 3 3⁄8 86 3519 1596.2 1 MANUFACTURING AND QUALIT
DATE:
DEG X° = ±2 ACCEPTING THIS SHEET
C MATERIAL:
FRACTIONAL X/X = ±1/32 AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
DESCRIPTION:
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
Sizes 2 1⁄2 (63) and larger shipped in palletized cartons or bulk. SHEET ON REQUEST. XXXX
SIZE: PART NUMBER: REV
A XXXXX A
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
Also available in the following Degrees (60°, 45°, 30°, 22 1⁄2°, 15° & 11 1⁄4°) COPYRIGHT © 2015 UNISTRUT.
ALL RIGHTS RESERVED.
DIMENSIONS IN
PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4 WEIGHT: XX lbs SHEET 1 OF 1
1
Minimum requirement as per UL Standard
2
For information only, not a requirement as per UL Standard SUPER KWIK-COUPLE™ ELBOWS AVAILABLE
Sizes 2 1⁄2 (63) and larger shipped in palletized cartons or bulk. Trade Size 2 1⁄2 to 4 by special order TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
Also available in the following Degrees (60°, 45°, 30°, 22 1⁄2°, 15° & 11 1⁄4°) 2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4 WEIGHT: XX lbs
2
For information only, not a requirement as per UL Standard
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
3 PLACE 0.XXX = ±0.005 AFFILIATES. ANY PERSON
DEG X° = ±2 ACCEPTING THIS SHEET
DATE:
MANUFACTUR
Sizes 2 1⁄2 (63) and larger shipped in palletized cartons or bulk. FRACTIONAL X/X = ±1/32
MATERIAL:
XXXXXX
AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
OR DUPLICATION THEREOF XXXX
DESCRIPTION:
XXXXXX
Also available in the following Degrees (90°, 60°, 30°, 22 1⁄2°, 15° & 11 1⁄4°)
EXCEPT AS AUTHORIZED BY
A XXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4
A XXXXX
UNLESS OTHERWISE
FINISH:
1 1⁄2 41 24 610 34 5⁄8 879 10 5⁄8 270 1293 586.5 3 PLACE 0.XXX = ±0.005
DEG X° = ±2
FRACTIONAL X/X = ±1/32
MATERIAL:
AFFILIATES. ANY PERSON
ACCEPTING THIS SHEET
DATE:
XXXXXX
1 1⁄2 41 30 762 41 1041 11 279 1512 685.8
XXXXXX OR DUPLICATION THEREOF XXXX
EXCEPT AS AUTHORIZED BY
COPE AND TO RETURN THIS DATE:
A XXXXX A
UNLESS OTHERWISE
FINISH:
XXXXXX
AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
OR DUPLICATION THEREOF XXXX
DESCRIPTION:
XXXXXX
EXCEPT AS AUTHORIZED BY
COPE AND TO RETURN THIS DATE:
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
A XXXXX A
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4 WEIGHT: XX lbs SHEET 1 OF 1
A X
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
REFERENCE ONLY
ALL RIGHTS RESERVED.
A
PARENTHESES ( ) ARE
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
XXXXXX
D
ARE IN INCHES [ MM]
FINISH:
1
⁄2 16 2 51 0.78 19.8 14 12 5.4 25
1
⁄2 16 2 1⁄2 64 0.78 19.8 14 15 6.8 25 A
C
B C
1
⁄2 16 3 76 0.78 19.8 14 19 8.6 25
1
⁄2 16 3 1⁄2 89 0.78 19.8 14 22 10.0 25 TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
DATE:
XXXX
XXXXXX
A COPYRIGHT © 2015 UNISTRUT.
ARE IN INCHES [ MM]
DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
1
C
1
⁄2 16 10 254 0.78 19.8 14 68 30.8 25
1
⁄2 16 12 305 0.78 19.8 14 82 37.2 25 D
SHEET ON REQUEST. XX
UN
FINISH: NO
XXXXXX AR
COPYRIGHT © 2015 UNISTRUT.
ALL RIGHTS RESERVED. PAR
R
3
⁄4 21 2 51 0.79 20.1 14 14 6.4 25
3
⁄4 21 2 1⁄2 64 0.79 20.1 14 19 8.6 25 C
A
3
⁄4 21 3 76 0.79 20.1 14 24 10.9 25 B C
3
⁄4 21 3 1⁄2 89 0.79 20.1 14 28 12.7 25
⁄4 21 4 102 0.79 20.1 14 34 15.4 25
ORIGINAL
3 TOLERANCE UNLESS
OTHERWISE NOTED:
THIS SHEET CONTAINS
CONFIDENTIAL, PROPRIETARY DRAWN:
2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
D B
D
3 PLACE 0.XXX = ±0.005 AFFILIATES. ANY PERSON
DEG X° = ±2 ACCEPTING THIS SHEET
DATE:
MANUFACT
3
⁄4 21 5 127 0.79 20.1 14 43 19.5 25 FRACTIONAL X/X = ±1/32
MATERIAL:
XXXXXX
AND/OR INFORMATION AGREES XXXX
TO MAKE NO DISCLOSURE, USE APPROVED:
OR DUPLICATION THEREOF
EXCEPT AS AUTHORIZED BY
XXXX
DESCRIPTION:
XXXXXX
3
⁄4 21 6 152 0.79 20.1 14 52 23.6 25
COPE AND TO RETURN THIS DATE:
A XX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX
A COPYRIGHT © 2015 UNISTRUT.
ARE IN INCHES [ MM]
3
⁄4 21 10 254 0.79 20.1 14 89 40.4 25 C
3
⁄4 21 12 305 0.79 20.1 14 109 49.4 25 D
1 27 (Close) 1 1⁄2 38 0.98 24.9 11 1⁄2 16 7.3 25 TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
CONFIDENTIAL,
CONTAINS ORIGINAL
MANUFACTURING AND
FRACTIONAL X/X OTHERWISE NOTED: AGREES XXXX PROPRIETARY
DRAWN:
= ±1/32 AND/OR INFORMATION DESCRIPTION:
Threads D
Trade Metric Total Thread Approximate Weight Standard
Length (A) Per
Size Designator Length (B)1 Per 100 Pieces Package
Inch1 1:4
A X
REFERENCE ONLY
ALL RIGHTS RESERVED. SCALE:
A
PARENTHESES ( ) ARE
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
XXXXX
A X
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX
A COPYRIGHT © 2015 UNISTRUT.
ARE IN INCHES [ MM]
2 1⁄2 63 3 1⁄2 89 1.57 39.9 8 120 54.4 1 TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
CONFIDENTIAL,
CONTAINS ORIGINAL
MANUFACTURING AN
FRACTIONAL X/X OTHERWISE NOTED: AGREES XXXX PROPRIETARY
DRAWN:
= ±1/32 AND/OR INFORMATION DESCRIPTION:
Standards
Allied® Rigid Aluminum Conduit is listed by Underwriters’ Laboratories to
UL 6A, “Standard for Electrical Rigid Metal Conduit — Aluminum, Red Brass
and Stainless Steel” and is manufactured in accordance with ANSI C80.5
(Replaces Federal Specification WWC- 540C).
Thread Protectors
Color-Coded end caps keep threads clean and sharp and help provide trade
size recognition. Even sizes are blue, 1⁄2 trade sizes are black, and 1⁄4 trade
sizes are red.
Size Designator Dimensions (A) Length (B) Per Inch Per 100 Pieces Package
B
in. mm. in. mm. in. lb. kg.
1
⁄2 16 1.078 27.38 1 5⁄8 41.3 14 6 2.7 100
3
⁄4 21 1.328 33.73 1 41⁄64 41.7 14 9 4.1 50
1 27 1.562 39.67 1 31⁄32 50.0 11 1⁄2 13 5.9 30
1 1⁄4 35 1.953 49.61 2 1⁄32 51.6 11 1⁄2 19 8.6 25 A
1 1⁄2 41 2.219 56.36 2 1⁄16 52.4 11 1⁄2 23 10.4 25
2 53 2.750 69.85 2 1⁄8 54.4 11 1⁄2 35 15.9 15
2 1⁄2 63 3.281 83.34 3 3⁄16 81.0 8 68 30.8 20
3 78 3.812 96.84 3 5⁄16 84.1 8 91 41.3 15
3 1⁄2 91 4.438 112.71 3 13⁄32 86.5 8 108 49.0 12
4 103 5.000 127.00 3 33⁄64 89.3 8 142 64.4 12
5 129 6.219 157.96 3 61⁄64 100.4 8 242 109.8 8
6 155 7.312 185.74 4 1⁄4 108.0 8 320 145.2 6 TOLERANCE UNLESS THIS SHEET CONTAINS ORIGINAL
OTHERWISE NOTED: CONFIDENTIAL, PROPRIETARY DRAWN:
2 PLACE 0.XX = ±0.015 INFORMATION OF COPE AND ITS XXXX
3 PLACE 0.XXX = ±0.005 AFFILIATES. ANY PERSON
A XXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
A XXXXX
UNLESS OTHERWISE
FINISH:
A XXXXX A
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE SCALE: 1:4 WEIGHT: XX lbs 1 1
Nominal
REFERENCE ONLY SHEET OF
3
⁄4 21 4 1⁄2 114 7 ⁄8 200 3 1⁄4
7
83 1 1⁄2 38 23 10.4 40
1 27 5 3⁄4 146 8 3⁄4 222 3 5⁄8 92 1 7⁄8 48 40 18.1 25
1 1⁄4 35 7 1⁄4 184 10 1⁄2 267 4 3⁄8 111 2 51 65 29.5 10
1 1⁄2 41 8 1⁄4 210 13 1⁄8 333 5 3⁄8 137 2 51 102 46.3 10 A
B
26
COPE AND TO RETURN THIS DATE:
alliedeg.com
SHEET ON REQUEST. XXXX
SIZE: PART NUMBER:
A XXXXX
UNLESS OTHERWISE
FINISH: NOTED: DIMENSIONS
XXXXXX ARE IN INCHES [ MM]
COPYRIGHT © 2015 UNISTRUT. DIMENSIONS IN
ALL RIGHTS RESERVED. PARENTHESES ( ) ARE
REFERENCE ONLY
SCALE: 1:4 WEIGHT:
Rigid PVC Conduit & Fittings
• Corrosion Resistant
• Non-Magnetic
• Non-Galvanic
• Self-Extinguishing
• Impact Resistant
Trade Size Part Number Average O.D. Minimum Average I.D. Minimum Wall Weight Per Foot 10 Ft Crate Quantity
PVC Conduit & Fittings
Trade Size Part Number Average O.D. Minimum Average I.D. Minimum Wall Weight Per Foot 20 Ft Crate Quantity
Trade Size Part Number Average O.D. Minimum Average I.D. Minimum Wall Weight Per Foot 10 Ft Crate Quantity
Trade Size Part Number Average O.D. Minimum Average I.D. Minimum Wall Weight Per Foot 20 Ft Crate Quantity
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot 20 Ft Crate Quantity
PVC Conduit & Fittings
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot Crate Quantity
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot Crate Quantity
Allied Tube & Conduit® Catalog
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot Crate Quantity
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot Crate Quantity
Trade Size Part Number Average O.D. Minimum Wall Weight Per Foot Crate Quantity
1 ⁄4 1
3,300 330 132,000 5 2.50
1 1⁄2 2,250 225 90,000 5 2.50
2 1,400 140 56,000 5 2.50
Schedule 40/80
2 1⁄2 930 93 37,000 5 2.50
10’ Pipe Length
3 880 88 28,160 4 3.13
3 ⁄2 1
630 63 20,160 4 3.13
4 570 57 18,240 4 3.13
5 380 38 12,160 4 3.13
6 260 26 8,320 4 3.13
8 140 14 4,480 4 3.13
1
⁄2 12,000 600 288,000 6 4.16
3
⁄4 8,800 440 176,000 5 5.00
1 7,200 360 144,000 5 5.00
1 ⁄4 1
6,600 330 132,000 5 5.00
1 ⁄2 1
4,500 225 90,000 5 5.00
2 2,800 140 56,000 5 5.00
Schedule 40/80
2 ⁄2 1
1,860 93 37,000 5 5.00
20’ Pipe Length
3 1,760 88 28,160 4 6.25
3 1⁄2 1,260 63 20,160 4 6.25
4 1,140 57 18,240 4 6.25
5 760 38 12,160 4 6.25
6 520 26 8,320 4 6.25
8 280 14 4,480 4 6.25
1 7,200 360 144,000 5 5.00
Allied Tube & Conduit® Catalog
1 ⁄2 1
4,500 225 90,000 5 5.00
2 2,800 140 56,000 5 5.00
DB or EB Duct
3 1,760 100 28,160 4 6.25
20’ Pipe Length
4 1,140 57 18,240 4 6.25
5 760 38 12,160 4 6.25
6 520 26 8,320 4 6.25
C-Duct
4 1,260 63 20,160 4 6.25
20’ Pipe Length
Full truckloads of some individual Schedule 40 products and all Schedule 80 products may exceed trucking weight limits.
90° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 59588 0.840 1.500 4.00 50
⁄4 59589 1.050 1.500 4.50 25
45° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 59575 0.840 1.500 4.00 50
3
⁄4 59576 1.050 1.500 4.50 25
1 59577 1.315 1.875 5.75 25 L
1 1⁄4 59578 1.660 2.000 7.25 25
1 1⁄2 59579 1.900 2.000 8.25 25
R
2 59580 2.375 2.000 9.50 25
2 1⁄2 59581 2.875 3.000 10.50 50
3 59582 3.500 3.125 13.00 50
3 1⁄2 59583 4.000 3.250 15.00 25 D
4 59584 4.500 3.375 16.00 25
5 59585 5.563 3.625 24.00 20
6 59586 6.625 3.750 30.00 16
30° Elbows
90° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 802752 0.840 1.500 4.00 50
⁄4 802753 1.050 1.500 4.50 25
PVC Conduit & Fittings
45° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 802765 0.840 1.500 4.00 50
3
⁄4 802767 1.050 1.500 4.50 25
1 802768 1.315 1.875 5.75 25
1 1⁄4 802769 1.660 2.000 7.25 25 L
1 1⁄2 802770 1.900 2.000 8.25 25
2 802771 2.375 2.000 9.50 25
R
2 1⁄2 802772 2.875 3.000 10.50 50
3 802773 3.500 3.125 13.00 50
3 1⁄2 802774 4.000 3.250 15.00 25
4 802775 4.500 3.375 16.00 25 D
5 802776 5.563 3.625 24.00 20
6 802777 6.625 3.750 30.00 16
30° Elbows
Allied Tube & Conduit® Catalog
90° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 59012 0.840 1.500 4.00 50
⁄4 59013 1.050 1.500 4.50 25
45° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1
⁄2 59000 0.840 1.500 4.00 50
3
⁄4 59001 1.050 1.500 4.50 25
1 59002 1.315 1.875 5.75 25 L
1 1⁄4 59003 1.660 2.000 7.25 25
1 1⁄2 59004 1.900 2.000 8.25 25
R
2 59005 2.375 2.000 9.50 25
2 1⁄2 59006 2.875 3.000 10.50 50
3 59007 3.500 3.125 13.00 50
3 1⁄2 59008 4.000 3.250 15.00 25 D
4 59009 4.500 3.375 16.00 25
5 59010 5.563 3.625 24.00 20
6 59011 6.625 3.750 30.00 16
30° Elbows
90° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
3
⁄4 925610 1.050 1.500 4.50 25
1 924949 1.315 1.875 5.75 25
PVC Conduit & Fittings
45° Elbows
Trade Part Minimum Length (L) Standard Package
Average O.D. Radius (R)
Size Number I.D. Quantity
in. in. in.
1 1⁄2 903486 1.900 2.000 8.25 25
2 924967 2.375 2.000 9.50 25
2 1⁄2 924976 2.875 3.000 10.50 50
3 924990 3.500 3.125 13.00 50 L
4 925003 4.500 3.375 16.00 25
5 925015 5.563 3.625 24.00 20
R
6 925025 6.625 3.750 30.00 16
D
Allied Tube & Conduit® Catalog
45 – 924968 – 924969 – –
2 50
22 1⁄2 – 926024 – – – –
11 1⁄4 – 925875 – – – –
2 1⁄2 90 50 – 925761 926010 926012 925645 –
90 925657 926009 925658 926013 924996 925659
45 – 924991 – 924992 925654 –
3 30 50 – 924988 – – – –
22 1⁄2 924981 926025 925648 924983 924984 –
11 1⁄4 – 925646 – 925647 – –
90 – 925008 925673 926014 925010 925012
45 – 925669 – 925004 925005 925672
4 25
22 1⁄2 – 926026 – 926027 925000 925667
11 1⁄4 – – – 925661 924998 –
90 925017 – 925019 925020 –
NOT
5 45 20 925015 – 925016 925684 925685
AVAILABLE
22 1⁄2 – – 925014 – –
90 925028 – 925030 925031
NOT
6 45 16 925025 925026 925027 925694
AVAILABLE
22 1⁄2 925022 925023 925024 –
Allied Tube & Conduit® Catalog
4 25
22 1⁄2 925039 925041 924238 925044
11 1⁄4 – 924240 924241 925037
Allied Tube & Conduit® Catalog
Base Spacers
System Standard
Trade Size
Part Number Package Quantity
2 x 1 1⁄2 1511 250
2x2 1531 225
2x3 1551 225
3 x 1 1⁄2 1571 175
3x2 1591 155
3x3 1611 150
4x1 1211 175
4 x 1 1⁄2 1861 140
4x2 1251 140
Couplings
System Standard
Trade Size
Part Number Package Quantity
⁄2
1
59601 200
⁄4
3
59602 125
1 59603 70
PVC Conduit & Fittings
1 1⁄4 59604 40
1 1⁄2 59605 30
2 59606 40
2 1⁄2 59607 20
3 59608 40
3 1⁄2 59609 30
4 59610 20
5 59611 10
6 59612 8
8* 924576 1
Female Adapters
System Standard
Trade Size
Part Number Package Quantity
⁄2
1
59630 200
⁄4
3
59631 125
1 59632 70
1 1⁄4 59633 40
1 1⁄2 59634 30
2 59635 40
2 1⁄2 59636 20
3 59637 40
3 1⁄2 59638 30
4 59639 20
5 59640 10
6 59641 8
8* 59642 2
Terminal Adapters
System Standard
Trade Size
Part Number Package Quantity
Allied Tube & Conduit® Catalog
1
⁄2 59615 200
3
⁄4 59616 125
1 59617 70
1 1⁄4 59618 40
1 1⁄2 59619 30
2 59620 40
2 1⁄2 59621 20
3 59622 40
3 1⁄2 59623 30
4 59624 20
5 59625 10
6 59626 8
8* 59627 2
Fitting illustration for reference only
* UL 651 does not include 8”
DB
4 924153 30
5 924154 15
6 924155 10
1 924371 50
1 1⁄4 924069 50
1 1⁄2 895123 50
2 895124 50
2 1⁄2 895125 30
Sch40
3 895126 30
4 895127 30
5 895128 15
6 895129 10
8 49625 6
2 924570 50
Sch80
3 924571 30
4 C-Duct to 4 Duct 925352 30
C-Duct
4 924578 30
Allied Tube & Conduit® Catalog
1 1⁄4 789649 5
1 1⁄2 789650 5
2 789651 25
2 1⁄2 789652 12
3 789653 12
3 1⁄2 789654 6
4 789655 6
5 789656 1
6 789657 1
Trade Size
Part Number Package Quantity
2 924086 1
2 1⁄2 924087 1
Type LR Type T
2 59225 5 2 59235 5
2 1⁄2 59226 5 2 1⁄2 59236 2
3 59227 5 3 59237 2
3 1⁄2 59228 4 3 1⁄2 59238 1
4 59229 4 4 59239 1
Junction Boxes with Self Tapping Screws Junction Boxes with Brass Screw Inserts
System Standard
Description
Part Number Package Quantity
Toggle Switch 925744 10
Toggle Switch w/ Lock 925140 10
Plunger Switch 924041 10
Duplex Receptacle 925146 10
GFI Receptacle 925148 10
Receptacle - 15 Amp 925149 10
Receptacle - 20 Amp 925150 10
Receptacle - 30 Amp 925151 10
Receptacle - 50 Amp 925152 10
System Standard
Description
Part Number Package Quantity
Double Switch 925126 50
Combo Switch/Receptacle 925128 50
Double Duplex 924582 50
Double Blank w/Gasket 924574 50
System Standard
Description
Part Number Package Quantity
Double Toggle Switch Cover w/lock 802906 10
Switch and Duplex Receptacle 924047 10
Switch and GFI Receptacle 924048 10
Switch and Receptacle 1.375 924052 10
Fits F Series outlet boxes
System Standard
Description
Part Number Package Quantity
Double GFI Receptacle 924045 10
Double Duplex Receptacle 924046 10
Fits F Series outlet boxes
FSC FD - Deep
FSC - Deep
System Standard
Trade Size
Part Number Package Quantity
1
⁄2 - 3⁄4 - 1 925071 10
FSC FSCC
FD - Deep
Allied Tube & Conduit® Catalog
System Standard
Trade Size
Part Number Package Quantity
Blank 59155 5
FD - Deep
System Standard
Trade Size
Part Number Package Quantity
Blank 802881 5
3 59680 50
System Standard 3 1⁄2 59681 50
Trade Size
Part Number Package Quantity 4 59682 50
⁄2
1
33715 100 5 59683 25
⁄4
3
33716 100 6 59684 15
1 33717 100 8 59685 1
1 1⁄4 33718 50
1 1⁄2 33719 50
2 33720 25 Threaded Reducer Bushings
2 1⁄2 33721 10
3 33722 10 System Standard
Trade Size
Part Number Package Quantity
3 1⁄2 33723 10
4 33724 10
3
⁄4 x 1⁄2 924056 600
1 x 1⁄2 924058 300
1 x 3⁄4 924057 300
System Part
Size Standard Package Quantity
Number
1
⁄2 Pint 925353 24
Pint 924579 12
All Weather Cement - Medium Body - Blue
Quart 924580 12
Pint 926040 12
Primer - Clear
Quart 813087 12
1
⁄2 Pint 926042 24
the product complies with its published specifications). SELLER DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY WARRANTY THAT THE PRODUCTS
WILL CONFORM TO ANY SAMPLES, ANY WARRANTY THAT THE PRODUCTS WILL NOT DISCOLOR OR THE TEXTURE OR FINISH WILL NOT CORRODE
OR DETERIORATE, ANY WARRANTY RELATED TO THE FAILURE OF ANY SOLVENT WELD JOINT OR DEFECTIVE SOLVENT USED IN MAKING ANY
SUCH JOINT (EXCLUDING SOLVENT WELDS MADE BY SELLER), AND ANY WARRANTY REGARDING ANY ANCILLARY SERVICES RENDERED.
Remedy and Limitation of Liability. If the products do not comply with the warranties set forth above, Buyer must provide prompt written
notice to Seller of the non-conformance in reasonably sufficient detail (and such other detail as Seller requests) and must comply with Seller’s
instructions and policies regarding the non-conforming product. Buyer must provide such notice within 30 days of receipt of the products.
Seller’s liability will terminate upon expiration of the notice period. Seller’s sole liability for non-conforming products will be to repair or replace
the non-conforming product or return the purchase price paid therefore, at Seller’s sole option. Buyer will bear all disassembly, shipment and
reinstallation costs of repaired or replaced products. IN NO EVENT WILL SELLER BE LIABLE IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE
FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, REGARDLESS OF WHETHER SELLER WAS INFORMED OF THE POSSIBILITY OF
SUCH DAMAGES, AND IN NO EVENT WILL SELLER’S LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE OF THE PRODUCTS.
All trademarks, trade names, logos and similar marks used herein are the property of their respective owners.
Allied Tube & Conduit® Catalog
Notes
Allied Tube & Conduit® Catalog
Easy transitions
No pipe turning
www.alliedeg.com
Allied Tube & Conduit® Catalog