This document discusses the boundary conditions and loading for a structural analysis of a girder. The girder has fixed ends with weak springs simulating support from end girders. It is loaded at 8978mm from one end to represent a car wheel location. The load combination used is 1.4 times the dead load plus 1.6 times the live load.
This document discusses the boundary conditions and loading for a structural analysis of a girder. The girder has fixed ends with weak springs simulating support from end girders. It is loaded at 8978mm from one end to represent a car wheel location. The load combination used is 1.4 times the dead load plus 1.6 times the live load.
This document discusses the boundary conditions and loading for a structural analysis of a girder. The girder has fixed ends with weak springs simulating support from end girders. It is loaded at 8978mm from one end to represent a car wheel location. The load combination used is 1.4 times the dead load plus 1.6 times the live load.
f) Boundary conditions Both the ends of the girder are fixed end with weak springs, simulating the end girders support
g) Loading Type and distance
Girder is loaded at a distance of 8978 from an end for the carb wheel location Load combination – 1.4 DL + 1.6 LL (Where, DL- Dead Load, LL – Live Load )