Professional Documents
Culture Documents
What’s New
Known Issues
6707, 6712: Cases fail if processing unit 7152: Unable to delete all cases from 7275: No explanation when case ‘Failed’
is rebooted before they are transmitted to a Queue Manager (‘connection refused’) error. with incorrect output format. If DICOM cases
printer or display unit. In the event of a net- To delete cases in the Queue Manager, delete are sent to a system that does not support the
work interruption, cases will queue up for no more than 100 at a time. No fix is planned. requested DICOM Service, the case will fail
transmission on the ImageChecker Processing but no explanation will be provided. Call R2
Unit for up to 24 hours. It is not necessary to 7189: Malc marks appear differently on PU Service to check system configuration. A fix is
reboot the ImageChecker after network con- and CMU. There is a slight difference in the planned for the next scanner release.
nectivity is restored. Doing so will cause all appearance of the Malc marks between the
queued cases to fail. No workaround is avail- processing unit printouts and the display unit 7302: Vidar scanner autocalibration causes
able for this defect. No fix is planned. screens. A fix is tentatively planned for the failure of scanning case. If one scans cases
next release of CheckMate Ultra and Mam- simultaneously with scanner’s auto calibra-
7061: Multiple alerts upon transfer of molux software. tion, the case being scanned will fail. The
failed GE case. A GE case that fails to trans- default is OFF, and if it does get turned ON,
fer to the configured destination will generate 7198: ‘Unknown’ Study Time on CAD SC an R2 Technology service representative
one alert for each image in the case. There is images at PACS. R2 does not define the should reset the time at 3 AM (as an example)
no immediate plan to fix. Study Time for DigitalNow cases. No fix is using the service tool.
planned.
7084: System does not retain repeat 7325: Automatic window leveling for Digi-
cases. For digital cases, the user interface 7199: Incorrect Scan Date/Time on print- talNow needs adjustments. Automatic cali-
will display only the most recent study in each outs for reprocessed cases. PU printouts bration of Window and Level may not satisfy
series. Identical cases sent more than once generated from reprocessed images will con- your preferences. Contact R2 Service for
will cause the earlier case to be overwritten. tain a date of 1970-01-01 or 1969-12-31. manual adjustment of calibration parameters.
No fix is planned. No fix is planned. A fix is planned for future release.