Professional Documents
Culture Documents
H TER
RA I N
C RA N
E S RC
550C
Lifting capacity: 55 t
Boom length: 11.5-43 m, 5 sections
Jib: 16 m
Warranty term: 2250 working hours or 18 months
QUALITY
CHANGES
THE WORLD
Superstructure
CAB
Unique, ergonomic, sound proof and corrosion resistant one-man-cab
with laminated safety glasses, sliding door, comfortable and adjustable
seat with safety belt, Radio, CD/MP3 and interior lightings. Independent
Cab heaters. Roof window with steel bars for ideal all-round view, sun
protection visor. Wipe and wash system. Control unit with joysticks, en-
gine information and electrical horn. Fire extinguisher. Thermo protected
handrails as a standard.
Engine Boom
DongFeng Cummins ISDe270 30 6.7 liter 6-cylin- Length from 11.5 to 43 m, 5 section telescopic, with
der diesel engine, ISDE 270 30, turbocharged with safety valve on telescopic cylinder. Boom head with 4
water coolant, engine-hour meter, coolant level sheaves. Lifting boom has one double action hydraulic
indicator, 198 kW/269 HP at 2500 RPM, maximal cylinder (2° to +80°) with integrated safety valve. Latice
ratational moment 970 nM at 1400 RPM. Audio- jib 16 m with fixed angles of tilt 0, 15, 30 degree.
visual warning system. Fuel tank capacity 300l.
Safety devices
Colour monitor in Russian and English language indicates importante
parameters: Luffing angle, load moment, load weight, working ra-
dius, maximum payload, hoisting height etc. Hoisting height limiter
warning signal and indication of hoisting function blocking. Payload
limiter with audible visible warning system. Anti-collision and zone
protection system, which helps to set up borders of working zone in
advance. If boarders are neglected the crane is blocked. Lock check
valve on the telescopic cylinders. Controller for the 3 last wire-circuits
on the winch.
Main winch Auxiliary Winch
Main hoist winch with Auxiliary hoist winch with plan-
p l a n e t a ry re d u c t i o n etary reduction hoisting gear
hoisting gear and auto and auto multidisc brake.
multidisc brake. Rope specification: 19 mm x
Ro p e s p e c i f i c a t i o n : 165 m
19 mm x 235 m
Chassis
Outriggers Axles
4 section hydraulic driven outriggers with 3 working Axles 2 steering driving axles. Front axle fixed to the
position: 0 %, 50 % and 100 %. Steel saddels. frame. Rear axle with auto-block system fixed with
joint.
Rated engine torque 970 Nm/1500 rpm Max.single rope lifting speed of auxiliary winch
150 m/min
(no load)
Max. traveling speed 25 km/h
Full extension/retraction time of boom 120/110 s
Working fuel consumption per hour 17 l
Full lifting/descending time of boom 55/75 s
Turning radius 12300 mm
Slewwing speed 2,6 r/min
Min.turning radius of boom head 15900 mm
Temperature range –25°C ~ +40°C
Wheel formula 4x4
High Voltage Detector included
Min. graund cleerance 503 mm
Approach angle 23°
Departure angle 20°
Max.gradeability 75%
Standard toolbox included Additional equipment available on request
Fire extinguisher included Aircondition: included
Cab heater included Arctic Package for temperature range till –40°С
Product dimensions
SRC550H
3760
2224
23°
20°
503
2050 1950
5855 2005 4000 2440
14300
7200
3692.5 3507.5
600
0
35
R4
3300
7200
3407.5 3792.5
R13 R15
925 962
R13
028
R1
R907
26
R10
48
R11
271
8
454
26
R10
48
R11
271
8
454
26°
4
R1269
19°
4
R1269
19°
R3
18
R51
72
R32
7
93 R64
10
R779
7
57
R4
26° 26° 4
R111
44
37
R68
R3
18
R51
72
R32
7
93 R64
10
R779
7
57
R4
26° 26° 4
R111
44
37
R68
19° 19°
19° 19°
Working ranges
63
43+16
60
m
0°
57
15°
30°
43+9.2
54
m
51
48
8.5 8.5 9
7.5 8
43m
45
6.5
5.5
4.2
42 10.5 11 11.5
39.062
3.1 9 10
8
2.5 6.3
m
5
lifting height (m)
39 1.8
3.8 13 14 14
11.512.1
35.125
1.4 2.9 10.2
9
36
m
1.1 2.2 7
4.7
Lifting height (m)
1.7 3.6
33 0.8
1.2 2.8
0.7 1.9 21.5 22
16.8 19.5
27.25m
30
1 1214.5
1.5 9.9
8.3
27 0.8 5.9
1 4.3
24
0.9 3.1 32
29 32
19.375
21.5 25.7
21 2.2 17.2
13.5
m
10.3
0.7 8.7 40
34 40
15.4m
18 1.6 7.2 30
25
19.5
4.9
15 15 48.4 55
11.5m
11.7
41
1.1 9.5 33.5
12
3.4 25.5
7.7 20
9
15.7
6
3 SRC550H
0
36 33 30 27 24 21 18 15 12 9 6 3
Radius (m)
Radius (m)
www.palfinger-sany.com
Load charts for main boom
Parts of line 10 10 8 8 4 4 3
Load charts for main boom
Parts of line 10 10 8 6 4 4 3
Load charts for main boom
meters kg
43 + 9.2 43 + 16
Range (m)
0° 15° 30° 0° 15° 30°
35 10.7 4250
40 12.2 4050
45 13.7 3850 3300 2700
50 15.2 3550 3100 2750 2550
55 16.8 3200 2900 2600 2400 1950
60 18.3 2800 2600 2400 2250 1900
65 19.8 2350 2250 21000 2000 1800 1350
70 21.3 1950 1900 1800 1700 1650 1350
75 22.9 1600 1550 1500 1450 1400 1300
80 24.4 1350 1300 1250 1250 1200 1150
85 25.9 1100 1050 1000 1100 1050 1000
90 27.4 900 850 850 1000 950 900
95 29.0 700 750 750 900 850 800
100 30.5 650 700 800 750 750
105 32.0 600 650 700 700
110 33.5 600 650
115 35.1 550
The values given in the table are the rated lifting capacities of the crane on an even and solid ground when the crane is in
the leveling state. The values above the thick real line in the table are dependent on the strength of crane, and the values
below the thick real line are dependent on the stability of crane.
The operating range in the table refers to the actual range after hoisting.
The values of rated loads depending on stability surely follow ISO 4305.
The rated lifting capacity in the table includes the weight of lifting hook (the main lifting hook weights 360kg and auxiliary
lifting hook 160 kg).
If the actual boom length and range are between two values, the rated lifting capacity determined by the longer boom
and the larger range shall be selected for the lifting operation.
Service
We provide you with high-quality after-sales service and commit ourselves to the following THREE core principles:
ONE: Give us ONE call and we will take care of your problem
TWO: We offer TWO days of free training for your operators
THREE: We do THREE inspections prior shipping the machine to you
We provide on-site service within 48 hours by our dealers, service stations or service specialists.
Our dealers, service stations and service specialists are regularly trained by PALFINGER SANY. The service equipment they use
will enable them to provide you high quality service.
For PALFINGER SANY it is extremely important to provide a fast spare part supply for the product range offered to you.
Therefore, we operate spare parts center with more than 4.100 parts in stock. Parts will be dispatched within 24 hours or
can be directly picked up by yourself in our warehouse during our office hours.
PALFINGER SANY takes technical problems very serious. In the case of any technical issues, the company offers an extended
warranty period of 2250 hours or 18 months from putting cranes into operation.
PALFINGER SANY will provide you with high-quality after-sales service. Our service will help you solve your problem the
fastest and most reliable way.
Assembly line
Product overview
Truck Cranes
56
STC1300
Max. lifting capacity: 130 t, Main boom: 6 sections,
Extension boom: 13.3-78.1 m, Chassis: 10x6x6
Contact Details
57 PALFINGER SANY
International Mobile Cranes Sales GmbH
F.-W.-Scherer Straße 24 | 5020 Salzburg | Austria
5
* Products shown in the leaflet do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary.
+43 662 4684-0 | +43 662 4684-2437
Subject to technical changes, errors and translation mistakes. info@palfinger-sany.com
KP-SRC550CM2+RU, 02/16 www.palfinger-sany.com
+ENG