Professional Documents
Culture Documents
Model : 7120S
5 GENERAL DIMENSIONS
10 WORKING RANGES
15 SUPPLEMENTAL DATA
16 LIFTING CAPACITIES
24 SUPPLEMENTAL DATA
25 LIFTING CAPACITIES
39 TRANSPORTATION PLAN
Model: HINO P11C-VH Front and rear drums for load hoist powered by a hydraulic
Type: 4 cycle, water-cooled, vertical in-line 6, direct injection, variable plunger motors, driven through planetary reducers.
turbo-charger, intercooler Negative Brake: A spring-set, hydraulically released multiple-
Displacement: 10,520 liters disc brake is mounted on the hoist motor and operated through a
Rated power: 271 kW/1,850 min-1 counter-balance valve. (Positive free fall brake is optional)
Max. Torque: 1,469 N·m/1,400 min-1 Drum Lock: External ratchet for locking drum
Cooling System: Water-cooled Drums:
Starter: 24 V-6 kW Front Drums:
Radiator: Corrugated type core, thermostatically controlled 666 mm P.C.D x 672 mm wide drum, grooved for 26 mm wire
Air cleaner: Dry type with replaceable paper element rope. Rope capacity is 275 m working length and 350 m
Throttle: Twist grip type hand throttle, electrically actuated storage length.
Fuel filter: Replaceable paper element Rear Drum: 666 mm P.C.D x 672 mm, grooved for 26 mm
Batteries: Two 12 V x 136 Ah/5 HR capacity batteries, series wire rope. Rope capacity is 255 m working length and 350 m
connected storage length.
Fuel tank capacity: 400 liters Diameter of wire rope
Main winch: 26 mm x 275 m
Aux. winch: 26 mm x 255 m
Hydraulic System Third winch: 26 mm x 240 m
Line Speed*:
Main pumps: 4 variable displacement piston pumps Hoisting/lowering: 120 to 3 m/min
Control: Full-flow hydraulic control system for infinitely variable Line Pull:
pressure to all winches, propel and swing. Controls respond Max. Line Pull*: 233 kN {23.8 tf}
instantly to the touch, delivering smooth function operation. (Referential performance)
Cooling: Oil-to-air heat exchanger (plate-fin type) Rated Line Pull: 118 kN {12.0 tf}
Filtration: Full-flow and bypass type with replaceable element *Single line on first drum layer
Max. relief valve pressure:
Load hoist, boom hoist and propel system: 31.9 MPa Swing System
Swing system: 27.5 MPa
Control system: 5.4 MPa Swing unit is powered by hydraulic motor driving spur gears
Hydraulic Tank Capacity: 535 liters through planetary reducer, the swing system provides 360°
rotation.
Swing parking brakes: A spring-set, hydraulically released
Boom Hoisting System multiple-disc brake is mounted on swing motor.
Swing circle: Single-row ball bearing with an integral internally
Powered by a hydraulic motor through a planetary reducer. cut swing gear.
Brake: A spring-set, hydraulically released multiple-disc brake Swing lock: Manually, four position lock for transportation
is mounted on the boom hoist motor and operated through a Swing Speed: 2.1 min-1
counter-balance valve.
Drum Lock: External ratchet for locking drum
Drum: Single drum, grooved for 20 mm dia. wire rope Upper Structure
Line Speed: Single line on first drum layer
Hoisting/Lowering: 48 to 2 m/min Torsion-free precision machined upper frame. All components are
Boom hoisting/lowering: 20 mm x 190 m located clearly and service friendly. Engine will with low noise level.
Boom guy line: 30 mm Counterweight: 53.1 ton
Boom backstops: Required for all boom length
Totally enclosed, full vision cab with safety glass, fully adjustable,
high backed seat with a headrest and armrests, and intermittent
wiper and window washer (skylight and front window).
Cab fittings:
Air conditioner, convenient compartment (for tool), cup holder,
cigarette lighter, sun visor, roof blind, tinted glass, floor mat,
footrest, and shoe tray
3
Lower Structure Weight
Steel-welded carbody with axles. Crawler assemblies are Including upper and lower machine, 53.1 ton counterweight
designed with quick disconnect feature for individual removal as and basic boom (or basic boom + basic jib), hook, and other
a unit from axles. Crawler belt tension is maintained by hydraulic accessories.
jack force on the track adjusting bearing block. Weight: 120 ton
Crawler drive: Independent hydraulic propel drive is built into Ground pressure: 93.6 kPa
each crawler side frame. Each drive consists of a hydraulic
motor propelling a driving tumbler through a planetary gear box. Attachment
Hydraulic motor and gear box are built into the crawler side
frame within the shoe width. Boom & Jib:
Crawler brakes: Spring-set, hydraulically released parking Welded lattice construction using tubular, high-tensile steel
brakes are built into each propel drive. chords with pin connection between sections.
Steering mechanism: A hydraulic propel system provides
both skid steering (driving one track only) and counter-rotating Boom and Jib length
steering (driving each track in opposite directions). Min. Length Max. Length
Track rollers : Sealed track rollers for maintenance -free (Min. combination) (Max. combination)
4
GENERAL DIMENSIONS
910
0
,95
R4
m
.0
61
to
m
.2
15
6,570
3,800 1,400
2,990
1,495
940
7,890
2,630
3,620
3,580
480
2,525
1,340
6,890 6,310
7,895
L L’
Hook L
120 t hook 5.0 m
70 t hook 5.0 m Hook L’
35 t hook 5.0 m Ball hook 4.2 m
5
Tower Jib (Unit: mm)
.2 m
m to 44
22.9
15° to 75°
But jib offset angle has limitation
(15°or more).
30.4 m to 51.7 m
60° to 90°
2,990
1,495
940
1,231
2,517
2,523
(CRAWLER EXTENDED)
This catalog may contain photographs of machines with specifications, attachments and optional equipment.
6
BOOM AND JIB ARRANGEMENTS
Crane Boom Arrangements
Boom Boom
Boom arrangement Boom arrangement
length m (ft) length m (ft)
18.3 (60)
45.7 (150)
21.3 (70)
24.4 (80)
48.8 (160)
27.4 (90)
51.8 (170)
54.9 (180)
30.5 (100)
33.5 (110)
57.9 (190)
36.6 (120)
61.0 (200)
7
Long Boom Arrangements
Boom 㻌
Long Boom arrangement
length m (ft)
61.0 (200)
7.6 7.6
64.0 (210)
67.1 (220)
70.1 (230)
73.2 (240)
76.2 (250)
79.2 (260)
Fixed Jib
Crane Jib
Jib Offset Angle: Jib length
10° or 30° boom Jib arrangement offset
m (ft)
length angle
B 3.0 T
12.2 (40) 4.6 4.6 30°
Boom
Symbol Jib Length Remarks
24.4 m 18.3 (60) B 3.0 6.1 T 10°/ 30° B 4.6 m Jib Base
to
24.4 (80) B 3.0 6.1 6.1 T 10°/ 30°
T 4.6 m Jib Top
61.0 m
Link
3.0 3.0 m Insert Jib
30.5 (100) B 3.0 6.1 6.1 6.1 T 10°/ 30° 6.1 6.1 m Insert Jib
The jib length of 12.2 m is based on the only setting of 30 degrees offset.
8
BOOM AND JIB ARRANGEMENTS
Tower Arrangements Tower Jib Arrangements
Tower Jib
Tower arrangement Jib arrangement
length m (ft) length m (ft)
Rail for spreader of upper tower jib
25.9 (85)
33.4 (110)
39.5 (130)
32.0 (105)
42.5 (140)
35.1 (115)
45.6 (150)
38.1 (125)
48.6 (160)
44.2 (145)
Symbol Tower Length Remarks
7.6 m Boom Base
1.4 m Tower Cap Symbol Tower Jib Length Remarks
3.0 3.0 m Insert Boom 6.1 m Tower Jib Base
6.1 6.1 m Insert Boom 7.6 m Tower Jib Tip
9.1 9.1 m Insert Boom
3.0A 3.0 m Relay Jib
: Available
Ball hook : Not available
9
WORKING RANGES
Crane Boom
50°
61.0 m Boom 64
57.9 m Boom
60
45°
54.9 m Boom
56
51.8 m Boom
48.8 m Boom 52
40°
45.7 m Boom
48
42.7 m Boom
44
39.6 m Boom 35°
33.5 m Boom
36
30°
30.5 m Boom
32
27.4 m Boom
24.4 m Boom 28
21.3 m Boom
24
18.3 m Boom
20
15.2 m Boom
16
4 8 12 16 20 24 28 32 36 40 44 48 52 56
Center
of rotation
1.4 m
10
WORKING RANGES
30°
10°
92
84
61.0 m Boom + 18.3 m Jib
80
72
68
64
60
24.4 m Boom + 30.5 m Jib
56
48
24.4 m Boom + 18.3 m Jib
44
40
24.4 m Boom + 12.2 m Jib
36
32
28
80°
24
20
30°
4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
Center
of rotation
1.4 m
11
Long Boom
76.2 m Boom 80
50°
73.2 m Boom 76
70.1 m Boom
72
67.1 m Boom
64.0 m Boom 68
45°
61.0 m Boom 64
60
40°
56
52
35° 48
40
30° 36
32
12 16 20 24 28 32 36 40 44 48 52 56 60 64
Center
of rotation
1.4 m
12
WORKING RANGES
Tower Jib
Tower Lenght: 39.5m
90
85
75°
80
35.1 m Jib 65°
32.0 m Jib 75
55°
29.0 m Jib
70
25.9 m Jib
22.9 m Jib
65
45°
60
15°
1.8 m 15° 55
15°
15°
45
40
35
90° 30
25
80°
20
70°
15
60°
10
0
5 10 15 20 25 30 35 40 45 50 55 60 65
2.53 m
Center
of rotation Radius from center of rotation (m)
1.4 m
13
WORKING RANGES
Tower Jib
Tower Lenght: 51.7m
35.1 m Jib 90
55°
32.0 m Jib
85
29.0 m Jib
75
15°
15° 70
1.8 m
15°
65
60
15°
55
45
40
35
90°
30
25
80°
20
70°
15
60°
10
0
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
2.53 m
Center
of rotation Radius from center of rotation (m)
1.4 m
14
SUPPLEMENTAL DATA
• Ratings according to Japanese Construction Codes for Mobile <Reference Information>
Cranes. Main hoist loads
• Operating radius is the horizontal distance from centerline of No. of Parts of Line 1 2 3 4 5
rotation to a vertical line through the center of gravity of the Maximum Loads (kN) 118 235 353 471 588
load. Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
• Deduct weight of hook block (s), slings and all other load
handling accessories from main boom ratings shown. No. of Parts of Line 6 7 8 9 10
• Ratings shown are based on freely suspended loads and make Maximum Loads (kN) 706 824 941 1,059 1,177
no allowance for such factors as wind effect on lifted load, Maximum Loads (t) 72.0 84.0 96.0 108.0 120.0
ground conditions, out-of-level, operating speeds or any other
condition that could be detrimental to the safe operation of this Auxiliary hoist loads
equipment. No. of Parts of Line 1
The operator, therefore, has the responsibility to judge the Maximum Loads (kN) 118
existing conditions and reduce lifted loads and operating Maximum Loads (t) 12.0
speeds accordingly.
• Ratings are for operation on a firm and level surface, up to 1 % Weight of hook block
gradient. Hook Block 120 t 70 t 35 t Ball Hook
• At radii and boom lengths where no ratings are shown on Weight (t) 1.7 1.2 0.9 0.45
chart, operation is not intended nor approved.
• Boom inserts and guy lines must be arranged as shown in the
"Operator's Manual". (Fixed jib lifting) 㻌
• Boom hoist reeving is 12 part line. • The total load that can be lifted is the value for weight of jib
• Gantry must be in raised position for all conditions. hook block, slings, and all other load handling accessories
• Boom backstops are required for all boom lengths. deducted from fixed jib ratings shown.
• The boom should be erected over the front of the crawlers, not • The availability of fixed jib mounting
laterally. - on crane boom : range 24.4 m to 61.0 m.
• Ratings inside of boxes are limited by strength of • One part of line on hook is not allowed to use for 12.2 m jib
materials. length with offset angle 10 degrees.
• The minimum rated load is 2.0 (ton).
Operation of this equipment in excess of rated loads
or disregard of instruction voids the warranty.
(Crane boom/long boom lifting)
• The total load that can be lifted is the value for weight of hook
block, slings, and all other load handling accessories deducted
from main boom ratings shown.
15
LIFTING CAPACITIES
Boom Boom
length length
Working (m) 39.6 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)
16
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
10.0 10.2m/12.0 10.7m/12.0 11.2m/12.0 10.0
12.0 12.0 12.2m/12.0 12.0 12.8m/12.0 12.0 13.3m/12.0 12.0
14.0 12.0 12.0 14.3m/8.0 12.0 12.0 14.9m/8.0 12.0 12.0 15.4m/8.0 14.0
16.0 12.0 12.0 8.0 16.4m/4.0 12.0 12.0 8.0 16.9m/4.0 12.0 12.0 8.0 17.5m/4.0 16.0
18.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 18.0
20.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 20.0
22.0 12.0 12.0 7.6 4.0 12.0 12.0 7.8 4.0 12.0 12.0 8.0 4.0 22.0
24.0 12.0 12.0 7.3 4.0 12.0 12.0 7.4 4.0 12.0 12.0 7.6 4.0 24.0
26.0 12.0 12.0 7.0 4.0 12.0 12.0 7.1 4.0 12.0 12.0 7.3 4.0 26.0
28.0 12.0 11.8 6.7 3.9 12.0 12.0 6.9 4.0 12.0 12.0 7.0 4.0 28.0
Working radius (m)
17
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
12.0 13.3m/12.0 13.9m/12.0 12.0
14.0 12.0 15.4m/12.0 12.0 15.9m/12.0 14.4m/12.0 14.0
16.0 12.0 12.0 17.5m/8.0 12.0 12.0 12.0 16.5m/12.0 16.0
18.0 12.0 12.0 8.0 19.6m/4.0 12.0 12.0 8.0 12.0 12.0 18.6m/8.0 18.0
20.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 20.1m/4.0 12.0 12.0 8.0 20.6m/4.0 20.0
22.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 22.0
24.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 24.0
26.0 12.0 12.0 7.9 4.0 12.0 12.0 8.0 4.0 12.0 12.0 8.0 4.0 26.0
28.0 12.0 12.0 7.6 4.0 11.9 12.0 7.8 4.0 11.8 12.0 7.9 4.0 28.0
30.0 11.0 11.2 7.4 4.0 10.7 11.0 7.5 4.0 10.6 10.9 7.6 4.0 30.0
32.0 9.9 10.2 7.1 4.0 9.7 10.0 7.3 4.0 9.6 9.8 7.4 4.0 32.0
34.0 9.0 9.3 6.9 4.0 8.8 9.1 7.1 4.0 8.7 8.9 7.2 4.0 34.0
36.0 8.3 8.5 6.7 3.8 8.0 8.3 6.8 3.9 7.9 8.1 7.0 4.0 36.0
Working radius (m)
18
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 61.0 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 Jib length (m)
16.0 16.5m/12.0 16.0
18.0 12.0 18.6m/12.0 18.0
20.0 12.0 12.0 20.7m/8.0 20.0
22.0 12.0 12.0 8.0 22.8m/4.0 22.0
24.0 12.0 12.0 8.0 4.0 24.0
26.0 12.0 12.0 8.0 4.0 26.0
28.0 11.1 11.4 8.0 4.0 28.0
30.0 9.9 10.2 8.0 4.0 30.0
32.0 8.9 9.1 7.8 4.0 32.0
34.0 8.0 8.2 7.6 4.0 34.0
Working radius (m)
19
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
12.0 13.8m/10.0 12.0
14.0 10.0 14.3m/10.0 14.9m/10.0 14.0
16.0 10.0 17.7m/9.0 10.0 10.0 16.0
18.0 10.0 9.0 10.0 18.3m/9.0 10.0 18.8m/9.0 18.0
20.0 10.0 9.0 21.7m/6.0 10.0 9.0 10.0 9.0 20.0
22.0 10.0 9.0 6.0 10.0 9.0 22.2m/6.0 10.0 9.0 22.7m/6.0 22.0
24.0 10.0 9.0 6.0 25.6m/3.0 10.0 9.0 6.0 10.0 9.0 6.0 24.0
26.0 10.0 9.0 6.0 3.0 10.0 9.0 6.0 26.1m/3.0 10.0 9.0 6.0 26.6m/3.0 26.0
28.0 10.0 8.7 5.8 3.0 10.0 9.0 5.9 3.0 10.0 9.0 6.0 3.0 28.0
30.0 10.0 8.3 5.7 3.0 10.0 8.6 5.8 3.0 10.0 8.9 5.8 3.0 30.0
Working radius (m)
20
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
16.0 17.0m/10.0 17.5m/10.0 16.0
18.0 10.0 10.0 18.1m/10.0 18.0
20.0 10.0 20.9m/9.0 10.0 21.4m/9.0 10.0 20.0
22.0 10.0 9.0 10.0 9.0 10.0 9.0 22.0
24.0 10.0 9.0 24.8m/6.0 10.0 9.0 25.4m/6.0 10.0 9.0 25.9m/6.0 24.0
26.0 10.0 9.0 6.0 10.0 9.0 6.0 10.0 9.0 6.0 26.0
28.0 10.0 9.0 6.0 28.8m/3.0 10.0 9.0 6.0 29.3m/3.0 10.0 9.0 6.0 29.8m/3.0 28.0
30.0 10.0 9.0 6.0 3.0 10.0 9.0 6.0 3.0 10.0 9.0 6.0 3.0 30.0
32.0 10.0 9.0 5.9 3.0 10.0 9.0 6.0 3.0 10.0 9.0 6.0 3.0 32.0
34.0 9.3 9.0 5.8 3.0 9.1 9.0 5.9 3.0 9.0 9.0 5.9 3.0 34.0
36.0 8.5 8.7 5.7 3.0 8.3 8.8 5.8 3.0 8.2 8.7 5.8 3.0 36.0
38.0 7.8 8.3 5.6 3.0 7.6 8.1 5.7 3.0 7.5 8.0 5.7 3.0 38.0
Working radius (m)
21
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 61.0 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 Jib length (m)
20.0 20.1m/10.0 20.0
22.0 10.0 22.0
24.0 10.0 24.1m/9.0 24.0
26.0 10.0 9.0 26.0
28.0 10.0 9.0 6.0 28.0
30.0 10.0 9.0 6.0 31.9m/3.0 30.0
32.0 9.3 9.0 6.0 3.0 32.0
34.0 8.4 9.0 6.0 3.0 34.0
36.0 7.6 8.2 6.0 3.0 36.0
38.0 6.8 7.4 5.9 3.0 38.0
Working radius (m)
22
LIFTING CAPACITIES
23
SUPPLEMENTAL DATA
• Ratings according to Japanese Construction Codes for Mobile Tower and jib combinations.
Cranes. Jib Length (m)
• Operating radius is the horizontal distance from centerline of 22.9 25.9 29.0 32.0 35.1 38.1 41.1 44.2
30.4 *
rotation to a vertical line through the center of gravity of the
33.4 *
load.
24
LIFTING CAPACITIES
25
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 36.5 Tower length (m)
36.5m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80°60° 70° 90° 60°80° 70°
90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.0
14.0 20.0 20.0 20.0 19.6 14.0
15.0 20.0 20.0 20.0 19.1 15.0
16.0 18.7 18.7 18.7 18.6 16.0
18.0 16.6 19.4m/15.4 16.6 16.6 16.6 18.0
20.0 15.0 15.0 15.0 20.7m/14.4 15.0 15.0 20.0
22.0 13.5 13.6 13.6 13.6 13.6 13.6 13.6 23.3m/12.8 22.0
24.0 10.1 12.5 12.4 12.5 12.5 12.5 12.5 12.5 24.0
Working radius (m)
Jib length (m) 22.9 25.9 29.0 32.0 35.1 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.5m/16.5 12.0
14.0 20.0 20.0 20.0 19.6 16.3 14.0
15.0 20.0 20.0 20.0 19.1 16.0 15.0
16.0 18.7 18.7 18.7 18.6 15.7 16.0
18.0 16.6 16.6 16.6 16.6 15.3 18.0
20.0 15.0 15.0 15.0 21.2m/14.1 15.0 15.0 14.9 20.0
22.0 13.6 13.6 13.6 13.6 13.6 22.5m/13.3 13.6 23.8m/12.6 13.6 22.0
24.0 10.2 12.5 12.4 12.5 12.5 12.5 12.5 12.5 12.5 25.1m/11.9 24.0
26.0 25.4m/7.4 11.5 9.8 11.5 11.3 11.5 11.5 11.5 11.5 11.5 26.0
Working radius (m)
26
LIFTING CAPACITIES
27
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 45.6 Tower length (m)
45.6m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.0
14.0 20.0 20.0 20.0 19.5 14.0
15.0 20.0 20.0 20.0 19.0 15.0
16.0 18.7 18.7 18.7 18.5 16.0
18.0 16.6 16.6 16.6 16.6 18.0
20.0 15.0 21.0m/14.2 15.0 15.0 15.0 20.0
22.0 13.6 13.6 13.6 22.3m/13.4 13.6 23.6m/12.7 13.6 22.0
24.0 10.3 12.5 12.5 12.5 12.5 12.5 12.5 24.9m/12.0 24.0
26.0 25.4m/7.5 11.5 9.9 11.5 11.3 11.5 11.5 11.5 26.0
Working radius (m)
28
LIFTING CAPACITIES
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/19.9 10.0
12.0 20.0 20.0 20.0 19.9 12.0
14.0 20.0 20.0 19.5 18.6 14.0
15.0 20.0 19.8 18.9 18.0 15.0
16.0 18.7 18.7 18.3 17.5 16.0
18.0 16.6 16.6 16.6 16.5 18.0
20.0 15.0 21.5m/13.9 15.0 15.0 15.0 20.0
22.0 13.6 13.6 13.6 22.8m/13.1 13.6 13.6 22.0
24.0 10.4 12.5 12.5 12.5 12.5 24.1m/12.4 12.5 25.4m/11.8 24.0
26.0 25.4m/7.5 11.5 10.0 11.5 11.4 11.5 11.5 11.5 26.0
28.0 10.7 7.1 10.7 9.4 10.7 10.3 10.7 28.0
Working radius (m)
34.0 6.7 8.8 7.4 8.8 7.3 8.8 6.4 7.6 34.0
36.0 5.3 8.3 6.3 8.3 6.8 8.3 6.0 7.3 36.0
38.0 37.1m/4.1 7.8 5.1 7.8 6.2 7.8 5.6 7.1 38.0
40.0 7.5 40.1m/5.7 3.8 7.5 41.8m/5.2 5.2 7.3 5.2 6.9 40.0
42.0 7.1 5.3 40.1m/3.5 6.9 5.2 4.1 6.8 43.6m/4.8 4.8 6.7 42.0
44.0 6.5 5.1 6.5 5.0 43.0m/3.2 6.4 4.7 4.0 6.2 45.3m/4.4 44.0
46.0 45.6m/5.4 4.8 6.0 4.7 5.9 4.6 2.8 5.8 4.3 46.0
48.0 4.5 5.5 4.4 5.5 4.3 5.5 4.1 48.0
50.0 4.2 48.5m/4.7 4.1 5.1 4.0 5.1 3.9 50.0
52.0 4.0 52.3m/2.4 3.8 51.4m/4.3 3.7 4.7 3.6 52.0
54.0 53.7m/3.5 2.3 3.6 3.5 4.3 3.4 54.0
56.0 2.2 3.4 3.3 54.4m/3.8 3.1 56.0
58.0 2.1 56.6m/3.3 3.0 2.9 58.0
60.0 2.0 59.6m/2.8 2.7 60.0
62.0 2.5 62.0
64.0 62.5m/2.4 64.0
Reeves 2 2 2 2 2 2 2 2 2 2 2 2 2 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the tower or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
29
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 51.7 Tower length (m)
51.7m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/18.6 10.0
12.0 20.0 20.0 19.4 18.6 12.0
14.0 20.0 19.2 18.2 17.4 14.0
15.0 20.0 18.6 17.7 16.8 15.0
16.0 18.7 18.1 17.2 16.4 16.0
18.0 16.6 16.6 16.3 15.5 18.0
20.0 15.0 15.0 15.0 14.7 20.0
22.0 13.6 22.1m/13.5 13.6 23.4m/12.8 13.6 13.6 22.0
24.0 10.4 12.5 12.5 12.5 12.5 24.7m/12.1 12.5 25.9m/11.5 24.0
26.0 25.4m/7.6 11.5 10.0 11.5 11.4 11.5 11.5 11.5 26.0
Working radius (m)
34.0 6.8 8.8 7.4 8.5 7.3 7.9 6.4 7.3 34.0
36.0 5.3 8.3 6.3 8.2 6.8 7.6 6.0 7.1 36.0
38.0 37.1m/4.2 7.8 5.2 7.7 6.3 7.4 5.6 6.8 38.0
40.0 7.3 41.1m/4.9 3.8 7.1 5.2 7.0 5.2 6.6 40.0
42.0 6.8 4.9 40.1m/3.5 6.6 42.9m/4.4 4.1 6.5 4.8 6.4 42.0
44.0 6.3 4.8 6.2 4.4 43.0m/3.2 6.1 44.6m/4.2 4.0 5.9 44.0
46.0 5.7 4.5 5.7 4.3 5.7 4.0 2.8 5.5 46.4m/3.8 46.0
48.0 46.1m/5.4 4.2 5.3 4.0 5.3 3.8 5.2 3.6 48.0
50.0 3.9 49.0m/4.7 3.7 4.9 3.6 4.8 3.4 50.0
52.0 3.6 3.5 4.3 3.3 4.5 3.2 52.0
54.0 3.4 3.2 3.1 4.2 3.0 54.0
56.0 54.7m/3.3 3.0 2.9 54.9m/3.8 2.8 56.0
58.0 57.6m/2.8 2.7 2.6 58.0
60.0 2.5 2.4 60.0
62.0 60.6m/2.4 2.2 62.0
64.0 63.5m/2.0 64.0
Reeves 2 2 2 2 2 2 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the tower or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
30
GENERAL DIMENSION FOR CLAMSHELL
Clamshell Specification
(Unit: mm)
R
4,850 1,400
h
θ
7,890
A
2,215
3,620
H
2,525
1,340
6,890
7,895
31
WORKING RANGE FOR CLAMSHELL
Clamshell Working Range
24.2 m Boom
45°
25
21.3 m Boom
40°
18.3 m Boom
20
35°
15.2 m Boom
10
5 10 15 20 25
2.5 m
1.4 m
32
SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART
• Operating radius is the horizontal distance from centerline of (Clamshell bucket lifting)
rotation to a vertical line through the center of gravity of the • The total load that can be lifted is the value for weight of
load. bucket, slings, and all other load handling accessories
• Deduct weight of bucket, slings and all other load handling deducted from main boom ratings shown.
accessories from main boom ratings shown. • The weight of bucket and materials must not exceed rated
• Ratings shown are based on freely suspended loads and make load.
no allowance for such factors as wind effect on lifted load, • Optimum bucket should be required according to material.
ground conditions, out-of-level, operating speeds or any other • Bucket capacity (m3) x specified gravity of material (ton/m3) +
condition that could be detrimental to the safe operation of bucket weight (ton) = rated load.
this equipment. The operator, therefore, has the responsibility • Bucket weight must also be decreased according to operating
to judge the existing conditions and reduce lifted loads and cycle and bucket lowering height.
operating speeds accordingly. • Rated loads are determined by stability and boom strength.
• Rated loads do not exceed 66% of minimum tipping loads. During simultaneous operations of boom and swing, rapid
• Ratings are for operation on a firm and level surface, up to 1% acceleration or deceleration must be avoided.
gradient. • Do not attempt to cast the bucket while swinging or diagonal
• At radii and boom lengths where no ratings are shown on draw-cutting.
chart, operation is not intended nor approved.
• Boom inserts and guy lines must be arranged as shown in the <Reference Information>
"Operator's Manual". Main hoist loads
• Boom hoist reeving is 12 part line. No. of Parts of Line 1
• Gantry must be in raised position for all conditions. Maximum Loads (kN) 98
• Boom backstops are required for all boom lengths. Maximum Loads (t) 10.0
• The boom should be erected over the front of the crawlers, not
laterally. Assembling the counterweight
45.1 ton counterweight
No.6 No.7
No.4 No.5
No.3
No.2
No.1
Counterweights
33
LIFTING CAPACITIES FOR CLAMSHELL
34
SUPPLEMENTAL DATA FOR REDUCED WEIGHTS RATING CHART
• Ratings according to Japanese Construction Codes for Mobile <Reference Information>
Cranes. Main hoist loads
• Operating radius is the horizontal distance from centerline of No. of Parts of Line 1 2 3 4 5
rotation to a vertical line through the center of gravity of the Maximum Loads (kN) 118 235 353 471 588
load. Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
• Deduct weight of hook block (s), slings and all other load
handling accessories from main boom ratings shown. No. of Parts of Line 6 7 8 9 10
• Ratings shown are based on freely suspended loads and make Maximum Loads (kN) 706 824 941 1,059 1,177
no allowance for such factors as wind effect on lifted load, Maximum Loads (t) 72.0 84.0 96.0 108.0 120.0
ground conditions, out-of-level, operating speeds or any other
condition that could be detrimental to the safe operation of
this equipment. The operator, therefore, has the responsibility Auxiliary hoist loads
to judge the existing conditions and reduce lifted loads and No. of Parts of Line 1
operating speeds accordingly. Maximum Loads (kN) 118
• Ratings are for operation on a firm and level surface, up to 1% Maximum Loads (t) 12.0
gradient.
• At radii and boom lengths where no ratings are shown on Weight of hook block
chart, operation is not intended nor approved. Hook Block 120 t 70 t 35 t Ball Hook
• Boom inserts and guy lines must be arranged as shown in the Weight (t) 1.7 1.2 0.9 0.45
"Operator's Manual".
• Boom hoist reeving is 12 part line. Assembling the counterweight
• Gantry must be in raised position for all conditions. 45.1 ton counterweight
• Boom backstops are required for all boom lengths.
• The boom should be erected over the front of the crawlers, not No.6 No.7
laterally. No.4 No.5
• Ratings inside of boxes are limited by strength of No.3
materials. No.2
• The minimum rated load is 2.0 (ton). No.1
• Crawler frames must be fully extended for all crane operations. Counterweights
35
LIFTING CAPACITIES FOR REDUCED WEIGHTS
Reduced Weights Rating Charts Counterweight: 45.1 t
Crane Boom Lifting Capacities Unit: metric ton
Boom Boom
length length
Working (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 (m) Working
radius (m) radius (m)
Boom Boom
length length
Working (m) 39.6 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)
36
SUPPLEMENTAL DATA FOR BARGE RATING CHART
• Operating radius is the horizontal distance from centerline of • Towing area
rotation to a vertical line through the center of gravity of the Towing area shall be within coastal area and quiet wave
load. condition. Offshore and open sea is not considered for this
• Deduct weight of hook block (s), slings and all other load machinery. Depend on the height of wave, counterweight shall
handling accessories from main boom ratings shown. be reduced during towing.
• Condition of barge stability this rating chart were determined
under the condition below. The stability of barge shall meet (Crane Boom)
below condition. During operation the machinery static • The total load that can be lifted is the value for weight of hook
inclination against horizontal level. block, slings, and all other load handling accessories deducted
(A) Both sides (right & left) of machine from main boom ratings shown.
Maximum inclination shall be within 1.5 degrees
(B) Front & backward of macine <Reference Information>
Maximum inclination shall be within 3.0 degrees Main hoist loads
No. of Parts of Line 1 2 3 4 5
Direction of Right and Left Maximum Loads (kN) 118 235 353 471 588
for Machinery
Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
(A) (B)
1.5° Weight of hook block
Hook Block 120 t 70 t 35 t Ball Hook
Weight (t) 1.7 1.2 0.9 0.45
37
LIFTING CAPACITIES FOR REDUCED WEIGHTS
Barge Rating Chart Counterweight: 53.1 t
Crane Boom Lifting Capacities Unit: metric ton
Boom Boom
length length
Working (m) 15.2 18.3 21.3 24.4 27.4 30.5 33.5 (m) Working
radius (m) radius (m)
Boom Boom
length length
Working (m) 36.6 39.6 42.7 (m) Working
radius (m) radius (m)
38
TRANSPORTATION PLAN
Name Dimension (mm) Weight (kg)
Base Machine
• Boom base 15,930 2,990*1
• Gantry
• Wire rope
3,145
3,255
3,215
• (Front / rear / boom hoist) 34,800
• Crane backstop
• Without crawler
• Without side steps 4,740 2,980
Base machine
• Gantry 9,025 2,990*1
• Wire rope
• (Front / rear / boom hoist)
3,255
31,000
3,215
• Without crawler
• Without self removal
cylinder
4,740 2,980
Base machine
• Without crawler 6,560 2,990*1
• Without gantry
• Without wire rope
3,145
3,145
(Boom hoist) 25,400
• Without self removal
cylinder
4,740 2,980
• Without side steps
Crawler
1,235
7,870 1,305
14,500
39
40
PARTS AND ATTACHMENTS
Base Machine Boom Tip (for Crane) Boom Base (with Tower Backstop)
Boom base, Gantry, Wire rope (Front/rear/boom hoist) Weight: 1,850 kg Weight: 3,100 kg
Crane backstop, Without crawler, Without side steps
1,530 5,280 7,845 1,980
Weight: 34,800 kg Width: 2,990 mm*1
1,985
1,400
2,410
15,930 2,990
3,145
3,255
3,215
1,980
1,990
With the side steps on the both sides : 3,340
Crawler
Weight: 14,500 kg
1,235
2,095
1,980
1,980
Gantry
Weight: 2,090 kg
Weight: 1,540 kg
9,270 1,980
5,745
2,790
1,980
800
860
Jib Top (Fixed Jib) Jib Base (Fixed Jib) Tower Jib Top Tower Jib Base
Weight: 315 kg Weight: 210 kg Weight: 900 kg Weight: 1,200 kg
1,355 8,150
1,030
1,020
1,020
2,020
1,530
1,365
840
840
5,040 4,760
1,365
6,395
3.0 m Jib Insert (Tower Jib) 6.0 m Jib Insert (Tower Jib) 9.0 m Jib Insert (Tower Jib) 3.0 m (3.0A) Special Tower Jib Insert
Weight: 210 kg Weight: 360 kg Weight: 510 kg (Special Boom Insert)
Weight: 230 kg
3,145 1,355 6,195 1,355 9,240 1,355
3,145
1,365
1,365
1,365
1,530
1,365
1,365
1,365
3.0 m Jib Insert (Fixed Jib) 6.1 m Jib Insert (Fixed Jib) Jib Strut (Tower Jib) Crane Jib Strut
Weight: 110 kg Weight: 190 kg Weight: 1,355 kg Weight: 300 kg
5,925
620 1,040
840 1,020
840 1,020
2,065
950
915
41
Tower Cap Crane Backstop Backstop (for Tower)
Weight: 1,780 kg Weight: 210 kg / 1 piece Weight: 420 kg / 1 piece
2,065
ĭ
235
210 ĭ
Upper Spreader (for Crane) Lower Spreader (for Crane) Upper Spreader (for Tower) Lower Spreader (for Tower)
Weight: 485 kg Weight: 315 kg Weight: 310 kg Weight: 410 kg
1,070
930
1,170
Counterweight (1) Counterweight (2) Counterweight (3) Counterweight (L) Counterweight (R)
Weight: 9,800 kg Weight: 9,610 kg Weight: 9,700 kg (4) (6) (8) (5) (7) (9)
Weight: 4,000 kg Weight: 4,000 kg
1,820 525 525 1,820
5,000
530
530
5,000 5,000
1,135
1,200
1,825
1,575
1,930
925
975
1,125 230
Note: Estimated weights may vary ± 2%.
42
Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your
country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and
specifications are subject to change without advance notice.
Copyright by KOBELCO CONSTRUCTION MACHINERY CO., LTD. No part of this catalog may be reproduced in any manner without notice.
Inquiries To :
5-15, Kitashinagawa 5-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN
Tel: +81-3-5789-2121 Fax: +81-3-5789-3372
URL: https://www.kobelcocm-global.com
KOBELCO is the corporate mark used by Kobe Steel on a variety of products Bulletin No. 7120S-SPEC-NR3-1 2210S Printed in Japan
and in the names of a number of Kobe Steel Group companies.