Professional Documents
Culture Documents
The USB 2.0 Ethernet adaptor converts an USB port on a Recloser Control (RC) cubicle into a
10/100/1000Base-T Ethernet port. It provides a Gigabit Ethernet Network connection for Ethernet enabled
communication equipment such as a wireless router.
Installation
1. Configure Port Settings for the USB port where the adaptor will be connected.
3. Start using the port (the driver for the adaptor is already installed).
Port Settings
Obtain an IP Address Use this option to obtain an IP address automatically from the network
Automatically using the DHCP protocol.
Use the following IP Address Use this option specify a fixed IP address:
Enter an IP address
Enter a subnet mask.
Enter a default gateway
Features