You are on page 1of 9

ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Configure the Network according to the Topology Diagram and Labels.

When you are finished PCs on the Student VLAN should be able to ping each other and so
should the PCs on the Faculty VLAN. The Admin PC should be able to SSH into S1 and S2
from the command prompt (Eg. PC>ssh -l admin 192.168.99.2)

PCs

- IP address (see topology),

- subnet mask (see topology),

- default gateway address (first usable address in network)

S1 & S2

1. name: S1, S2

2. enable password, md5 encrypted: class

3. domain name: danscourses.com

4. message of the day banner: Unauthorized access is prohibited!

5. console password: cisco

6. vty 0 15 password: cisco

7. Security RSA Key size: 1024

8. SSH version 2

9. vty: ssh only

10. VLAN 10: student

11. VLAN 20: faculty

12. VLAN 99: Mgt

13. Interface VLAN 99: S1-IP address 192.168.99.2, S2-IP address 192.168.99.3

14. Native VLAN 99

15. fa0/1 Trunk

16. fa0/2-0/13 access VLAN 10

17. fa0/14-0/24 access VLAN 20

18. Gi0/1 access VLAN 99

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 1 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

19. Encrypt all passwords

20. Save running-config to startup-config

Figure 1: User Profile

Figure 2: Student 1 IP configuration

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 2 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 3: Student 2 IP Configuration

Figure 4: Faculty 1 Ip configuration

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 3 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 5: Faculty 2 IP Configuration

Figure 6: Switch 1 configuration setting

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 4 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 7: Create Vlan and assign the name for the Vlan and assign the IP address to Vlan 99

Figure 8: Assign the port for Vlan 10, Vlan 20 and vlan 99 for Switch1

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 5 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 9: G0/1 switchport port-security and mac-address sticky configuration and saving the configuration

Figure 10: Figure 6: Switch 2 configuration setting

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 6 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 11: Create Vlan and assign the name for the Vlan
and assign the IP address to Vlan 99 & configure the F0/1 as a trunk port

Figure 12: Assign the port for Vlan 10, Vlan 20 and vlan 99 for Switch 2

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 7 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Figure 13: Saving the configuration

Figure 14: Result Activity

S1 Only

1. Gi0/1 Switchport Port-Security, sticky, maximum 1 mac address, violation shutdown

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 8 of 9
ICTNWK604 Plan and configure advanced internetwork switching solutions

Assessment 8 - Learning Activity 8

Take a screenshot of all the steps together with your final results and attach with the
Learning activity and submit it to your Trainer/Assessor.

Write the summary in your language: What you have learnt:

Answer:

What I have learnt with this activity first is on how to set the IP address and default gateway
address on each PC and on how to set the basic configuration for the Switches. In this
activity it helps me on how to configure the switched with the VLAN and trunking. It shows
how to create each Vlan (vlan 10, vlan 20 and vlan 99) and to assign name as the vlan name
and to assign the ports to vlan. I’ve learnt also how to configure fasthethernet as a trunk port.
Lastly I learn what the switchport Port-Security, sticky is and Mac address sticky, it means
that if you connect any device to the switchport it will automatically store permanently.

DS-SP-11/20 CA8-ICTNWK604 V1.2


RTO Provider Code: 91151
CRICOS Provider Code: 02668F Page 9 of 9

You might also like