Professional Documents
Culture Documents
Approved by:
Wireless Networking
Section 1:
1. Enroll and complete the Getting Started with Cisco Packet Tracer
https://skillsforall.com/course/getting-started-cisco-packet-
tracer?userLang=en-US
2. Show you have completed the Packet Tracer free course & Transcript.
(Screen Shot)
Section 2:
Lab 1:
1. Open the File “Basic.pkt” and complete the below task
a. Power on devices and then configure the devices as follows:
b. Configure IP addresses as shown in the diagram
c. Ensure routers can ping each other
d. Configure an enable password of "cisco"
e. Encrypt the enable password
f. Configure a secret password of "cisco123"
g. Configure the first 5 telnet lines and use a line password of cisco on
them
h. Make sure you can telnet from one device to the other
i. Configure a console password of "cisco" and test
j. Change Hostname to Student Name performing Lab
2. Once task is done copy paste the configurations from both the routers
Lab 2:
Open the File “Subnetting.pkt” and complete the below task
Configure the network as follows:
1. You have been allocated subnet 192.168.1.0/24.
a. Subnet this into four subnets as follows
b. Subnet 1 for site 1
c. Subnet 2 for the link between R1 and the Internet Router
d. Subnet 3 for site 2
e. Subnet 4 for the link between R2 and the Internet Router
2. Configure the routers per the instructions in the diagram.
3. Configure the switches with the second last IP address in the subnet
4. Configure the DHCP servers with the third last IP address in the subnet.
And configure the DHCP server to allocate IP addresses to the clients
5. Verify that PCs can access cisco.com and facebook.com using their
browsers
Lab 3:
Open the File “Basic VLANs.pkt” and complete the below task
Configure the network as follows: