Professional Documents
Culture Documents
The materials used to create the Automated Piggery Feeding Machine are all readily
available on the local market. The materials used by the researchers were reasonably priced and
meticulously chosen so as not to compromise the project's quality. The Bill of Materials is shown
in Table 3, and the tools required for the construction of the Automated Piggery Feeding
In the Table 3, the Billing of Material of the Automated Piggery Feeding Machine
and finally volume production, it is essential to establish and publish an accurate and up-to-date
Personal Laptop with software Used to upload the program codes to the microcontroller
1
Arduino IDE and AutoCAD and 3D model layout design.
5 Philip Screw Driver Used for tightening screws with Phillips heads
10 Power Hand Drill Used to drill holes on the wood and acrylic glass.
13 Utility Cutter Used for making precise cuts in small parts of the machine.
15 Tapping Screw Used to fasten the feed container to the feed body.
17 Steel Rule Used for measuring all the sizes needed for cutting.
Tools and Equipment Used in the Construction of the Automated Piggery Feeding Machine
Table 4
In Table 4, It shows the tool and equipment lists utilized in constructing of the Automated